Catalyst 3560 24 port-PoE switch powers on but no STAT LED and console not responding

I rebooted my Catalyst 3560 24 port PoE switch and when it turned on only the STAT LED went green the other LEDs are off. I get no response from the console port using putty and the cable I used before this happened. I tested the cable on another switch and it works fine with putty. What can I do with this switch?

This unit was purchased before I came to our company. There is no support or maint contract. I'm sure the unit is several years old...we'll call the vendor and see what they'll do..not expecting much.

Similar Messages

Updated to 10.9.2 - preview now won't launch (starts but crashes on launch and sits 'not responding' and I have to forcequit).

Any ideas of what might be the issue ? The issue appeared 'randomly' about 1 day after updating.
After googling I tried the 'trash the containers' files in the library troubleshooing step, and repaired permissions, which made it work for about 1 day.
Now again on launching preview by any method it sits in the doc not responding as has to be force quitted. I have since retried the 'trash the containers' thing and this didnt work, I emptied my cache, I repaired permissions... I'm stuck!
Any ideas??!

BTW, OS X 10.9.3 was released. I suggest you download and run the combo updater rather than use the smaller updater via the Mac App Store (MAS).
OS X Mavericks 10.9.3 (Update (Combo)
http://support.apple.com/kb/DL1746

My SGE 2000 24 port POE switch won't boot

Hi,
I have a sge 2000 24 port POE switch that won't boot, won't communicate on console or TCP/IP, and all of the port lights are lit up green. Holding down the reset button doesn't fix the issue and there aren't any lights illuminated on the left hand side of the switch. Do I have a future doorstop?
Any ideas?

Hi David, if you're unable to console the switch, there isn't an alternative recovery method. You should check the warranty by calling the SBSC to see if you're entitled to replacement.
-Tom
Please rate helpful posts

Cisco 3750x 24 port poe switch single port is faulty.

what i can do if my cisco 3750x 24 port poe switch single port is faulty ????

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12187366/cisco-3750x-24-port-poe-switch-failure

Cisco 3750x 24 port poe switch failure

what is the chance of cisco 3750x 24 port poe switch failure? is backup necessary for this ? please answer me in details.

If you have a Cisco switch with, at least, one faulty port you RMA the appliance.
There is nothing more detailed than that.

UPDATE: Deal of the Week - Cisco 3550 24 port PoE Switch

Well that didn't last long...our "Deal of the Week" this week sold out in 1 day, so we figured we better do another deal for everyone. - - - Cisco 3550 24 Port PoE Switch - $65.00 --- www.cablesandkits.com/DOW

How might you use PowerShell Direct, the latest addition to the PowerShell family that's coming with Windows 10 and Windows Server 2016? Consider this:Have you ever tried to make a configuration changeon a Friday afternoon, right before beer o’clock, and you couldn’t get access to the machine you needed to change? This problem might be caused by out-of-datesecurity settings, a network change, or something else.PowerShell Direct will work, even when otherwise things would stand in your way.According to Petri, the new software will change the way you operate "between hypervisorhost and guest virtual machine in a secure way." No more "faffing about to get security settings configured, holes poked in firewalls," or remoting in – PowerShell Direct gives you a direct way to open a session on any guest computer in seconds.
If you have Windows...

My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

Hi Goofy Goat,
Welcome to the Apple Support Communities!
It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Have a great day,
Joe

Light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire.

light on iphone4 flash will not turn off even when phone is powered down, now it is overheated and says not usable till cooled, but it won't cool. I'm afraid it will start a fire. Aside from breaking it, putting in in a metal pail in the yard, or putting it in a bucket of water, what can be done to keep it from setting a fire. It is so hot it burns my skin if i touch it, so bright, it hurts to look at, so hot there is now a warning that it is not usable till it cools down, but there is no way to cool it down.

more info, this happened after update to 7.0.2, and also wifi will no longer turn on since update. I took it in to apple store, it had one month left on warrenty, and they said that it would have had to get wet for this to happen. I thought that maybe it got wet through my jeans pocket in the rain or something so I didn't pursue it. Now of course, it is out of warranty by a month.

HT201263 Hi. My Ipod Touch switched off in the gym during exercise. I tried all the troubleshooting hints but nothing helps. It is not responding and I tried to charge in various ways by different cables and computers and all is in vain. Can anyone help p

Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?

If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on

Im switching from iPhone 5 toXperia Z3 D6616 and no notes The Notes app in Iphone

i switched from iPhone 5 toXperia Z3 D6616 and no notes The Notes app in Iphone
first i guess a need an app for android that is compalabe with notes, but what one i see a lot of them but wading through the garbage is soooooo time consuming.
when i di the transfer i get the message No notes transfered, Every thing else transfered fine
D6603 On AT&T Running Android 4.4.4 Build 23.0.1.A.5.77
Solved!
Go to Solution.

back4now2 wrote:
i switched from iPhone 5 toXperia Z3 D6616 and no notes The Notes app in Iphone
first i guess a need an app for android that is compalabe with notes, but what one i see a lot of them but wading through the garbage is soooooo time consuming.
when i di the transfer i get the message No notes transfered, Every thing else transfered fine
HI I will suggest you to use the Xperia Transfer feature to help transfer most of your data from your iphone to the Xperia Z3, that should also include your notes to be transfered.
Aside from that, the notes app for Xperia for some country will preload with scatch or Google Keep and some with both. Just take note of that.
Hope this helps to resolve your concern.
Regards.
I can accept failure.... I can't accept not trying - Michael Jordan

I need to update my phone, but my computer broke, and do not have a new one. I have an Itunes account, can I use someone else computer to go through with the update? Is there a chance of loosing all my data, ie: music/photos?

I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?

Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

The document shows in the printer viewer, but it is paused and will not print.

Hi, when ever I try to print anything, the doc is in the viewer but is always paused, and will not print. I've tried to restart, but it will not do it.
Any advice?

Hi, are you referring to a problem in trying to print via the ePrint service e.g.. sending an email to your printer's email address, or printing directly from your PC/laptop?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears. I have tried connecting the iP

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?

You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

Catalyst 3560 24 port-PoE switch powers on but no STAT LED and console not responding

Similar Messages

Maybe you are looking for