Catalyst 3750G-12S-E upgrade latest IOS images

Hi to all,
I've a question regarding the Upgrade to the latest IOS image since this 3750G model is one of the latest which have on-board only 16MB of Flash...
I've seen that latest IOS .tar images with SSH and Web Device are about 15.5MB or more, so I've tried to install one of these with archive /overwrite feature without succeeding...then tried to free up all the flash space needed but I've had the same problem!!!
How should I proceed??? Are this image only for other 3750models????
Thx
Omar

I ran into this same problem on my 3750G switches. Use the lm image for the switch and use Cisco's Network Assistant for managment or go command line.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html#wp670016
Catalyst 3750 or 3560 switches with a 16-MB flash memory can experience problems due to flash memory constraints, especially if they are using larger size images, such as c3750-ipservicesk9-tar, c3560-ipservicesk9-tar, c3750-ipbasek9-tar. or c3750-ipbasek9-tar images. These are the affected switches:
Catalyst 3560: WS-C3560-24PS and WS-C3560-48PS
Catalyst3750: WS-C3750-24PS, WS-C3750-24TS, WS-C3750-48PS, WS-C3750-48TS, WS-3750G-24T, WS-C3750G-12S , WS-C3750G-24WS, WS-C3750G-24TS, WS-C3750G-16TD
The workaround for these switches is to use the corresponding lm images, such as the c3750-ipserviceslmk9-tar or c3560-ipserviceslmk9-tar images, which require less memory. In future releases, images are expected to grow more in size, requiring more need for the lm images.

Similar Messages

How can i upgrade system IOS images of routers, switches and firewalls

Hi,
I am very much surprised and less of understanding yet how Cisco's licensing program or IOS upgrades are done. I have many routers, switches & ASA's of whom i wan to upgrade the IOS's but i cannot do so. How ever i can download those images from internet but i want to know how can i do this from Cisco as i don't want to trust those IOS's available over internet.
As per my study what i have found that i need to have Cisco Service Contract number for that devices so that i can download updated IOS Images for them.
Someone kindly explain what are the best methods for the above requirements.
Regards
@Mohammed

You're correct regarding a service contract. Cisco calls this Smartnet support. It includes both hardware support (i.e. returns for failed hardware), software support (including right to download and upgrade your software) and technical assistance (via the Cisco TAC). Smartnet is charged separately for each covered device. Once you have it, your cisco.com userid needs to be associated with your service contract number. Doing that will then allow you to download the software from cisco.com. (There are some very limited cases in which you don't have to have a support contract - mostly when there is a security advisory (PSIRT) indicating the Cisco software was flawed as it was initially released.)
Every product (or product family) has a product support page on cisco.com. That page includes release notes, configuration guide, users guides, and a link to software downloads for that product. Start by reading the release notes and determining which (if any) upgrade is appropriate for your product. Then you can download and upgrade the software as necessary.

How itunes cannot sychrnoise with iphone after upgrading latest IOS

why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

Catalyst switch model 2950 series need ios image flash is unable to load.

Hi, i'm in need of ios image for cisco 2950 series switch, because when its boots up its shows me a error message, Error loading "flash:c2950-i6q412-mz.121-13.EA1.bin"

when switch gets reload its show me this message.....
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 7739904
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image

Upgrading My IOS Image

How can I get an IOS image for the CISCO 2621 router,capable of supporting encapsulation on the subinterfaces I create.Do I download this and if so show me the site with the installation instructions.

To start with, what version of IOS are you running? You can also post your configuration.
To download software and access additional information you'll need a Cisco.com login. Based on your support contract you are entitled for software updates.
Because of vulnerbilities in IOS you can approach Cisco TAC for new software image. You'll need to supply the S/N of your router.
Search for "Heap-based overflow" on Cisco.com for more information

3550 DC and regular 3550 IOS image

Cisco Catalyst 3550 24 DC SMI Switch has IOS 12.2.55-SE6 ED, but
Cisco Catalyst 3550 48 SMI Switch has only up to 12.2.44-SE6 ED.
From what I understand these all 3550 switches are all on the same platform, the only difference is power/interface/POE and software. It seems DC model's newer IOS image works on the non DC models.
I noticed End of Software Maintenance Releases Date for non DC model is in 2007 while DC model is in 2011. Is that the only reason newer IOS images are not available for non DC models?
End of SW Maintenance Releases Date for DC model is July 5, 2011 but the latest IOS image was releated on Aug 1, 2012... Interesting? Why Cisco extends SW maintenance for this particular model?

Notice that 12.2(55)SE was released in 2010 and that the 12.2(55)SE3,4, 5, and 6 maintenance release following that only included bug fixes and no new functionality.
I would guess that there is enough in common with the other Catalyst 3k family switches still under support that share most of that image's code that Cisco has decided to continue releasing the maintenance updates despite having passed the formally communicated end-of-maintenance date. That date has more to do with contractual support and commitment than it does with an absolute date after which no maintenance release will be issued.

Bootloader and IOS image into a Catalyst 6509 running hybrid mode

Hi all,
I have a Catalyst 6509 running CatOS and IOS (hybrid mode)
The chassis is based on a SUP1A and a MSFC2
The MSFC is using images:
boot system bootflash:c6msfc2-is-mz.121-2.E
boot bootldr bootflash:c6msfc2-boot-mz.121-2.E
I would like to know if is possible to add the next command to the MSFC configuration in order to load the new image before erase the old one, even while the chassis boot using the old bootloader image:
boot system tftp c6msfc2-pk2o3sv-mz.121-26.E2.bin 10.10.5.15
Thanks.

Thanks Amit, thanks Ankur,
Yeah! I know about the limits of the bootflash space as the PCMCIA option.
It is a bit complicated to explaint the situation here but I will try.
Neither the actual CatOS or IOS will recognize the new PCMCIA we bought to this upgrade. :P
First, I will upgrade CatOS using rommon and xmodem command in order to execute a new catos release that can view the PCMCIA, then I will format it and I will copy the new catos image and the new ios image there.
Then I will change the catos boot config and I will do a reset.
I must do that because the new release don't enter into the bootflash and the actual CatOS don't support boot from the network :P. It is CatOS 5.5.1 :PPP
After that, I need also to upgrade the MSFC because as I read that the actual IOS won't see the PCMCIA filesystem. In order to do that I would like to prepare the MSFC to boot from a TFTP server and then modify the configuration to boot from sup-slot0: forever :)
Let me know what do you think about this steps.

SCP IOS Image Upgrades in Prime Infrastructure 2.1 Failing

Hi I'm running PI 2.1 with all the latest patches and packs but I can't get SCP Image transfers to work.
When I check the suggested logs from the Jobs Dashboard (and jump into the CLI root) I see the following:
[SWITCH-DEVICE]=Switch Hostname
[SWITCH-ADMIN-LOGIN]=Level 15 username login to Switch, same username the is used in the Device Work Centre
[PRIME-INF-IP]=Prime Infrastructure Server
[SWITCH-DEVICE]#archive download-sw ............... archive download-sw /allow-feature-upgrade
/overwrite scp://[SWITCH-ADMIN-LOGIN]@[PRIME-INF-IP]//localdisk/tftp/c3560-ipbaselmk9-tar.122-55.SE9.tar
Password:
Password:
% Authentication failed.
Could not buffer tarfile...using multiple downloads
examining image...
Password:
Password:
% Authentication failed.
%Error opening scp://[SWITCH-ADMIN-LOGIN]@[PRIME-INF-IP]//localdisk/tftp/c3560-ipbaselmk9-tar.122-55.SE9.tar (Permission denied)
%Error opening flash:update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
[SWITCH-DEVICE]#
It looks like the switch is trying to log into the PI server and download the software as opposed to PI sending the software to the switch.
I've used WinSCP to open up the URL, but none of the passwords I know or created work.
Do I need to SSH into the PI box and create a new CLI account (or Root CLI account) that matches up to the switch [SWITCH-ADMIN-LOGIN]?
Regards,

Hi rowansakul,
The work around for this particular issue involves having a user set up in the root cli and then from the the GUI navigate to Administration > System Settings > Image Management and set up the SSH Username with your new user account that you created under root cli. That is the credentials that Prime is looking for when it is attempting to access its own image repository.
Regards,
Brandon

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

HT4972 i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it

i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it?

You cannot. When you upgrade, you will get the latest version of iOS 7.

Is there a workaround for Facetime Apr 16th issue than upgrading to latest IOs ??

Hi,
I have IPad2 and I am facing the Facetime issue due to certificate expiry on Apr 16 as reported by Apple.
I dont want to upgrade to latest IOS because I think it would slow down the performance and ruin a good working IPad just to resolve this issue.
Is Apple going to provide some other alternative and/or fix the issue rather than forcing people to upgrade?

Folks choices are to either update or move to a different app such as skype or some other video chat program.

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

I just upgraded my iPhone 5s yesterday to the latest iOS version. Today, I can't get FaceBook to open at all on my phone. Any ideas?

I just upgraded my iPhone 5s yesterday to the latest iOS version. Today, I can't get the facebook app on my phone to even open. Any ideas? I already tried shutting the phone off and restarting, but it didn't change anything. Thanks for any suggestions that will help.

Do you have the latest FaceBook app version installed?
If so, try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.

I am trying to upgrade my iPhone 4 to the latest iOS via iTunes, but I keep getting a message saying that an error [-5000] occurred and continuing will delete all content on my iPhone. What's the solution?

I am trying to upgrade my iPhone 4 to the latest iOS via iTunes, but I keep getting a message saying that an error [-5000] occurred and continuing will delete all content on my iPhone. What's the solution?

okay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
Starting to get really annoying this thing.. Any smart suggestions what's going on?

TS3899 After upgrading to the latest IOS version 7.1, in mail on ipad, if I select more than 5 mail items to delete the mail software package crashes and I have to relaunch mail? Anyone else noticed this?

After upgrading to the latest IOS version 7.1, in mail on ipad, if I select more than 5 mail items to delete the mail software package crashes and I have to relaunch mail? Anyone else noticed this?

I haven't encountered this problem on my iPad Air but this is what I usually do when Mail misbehaves.
Quit the Mail app like I describe then reset the iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

Catalyst 3750G-12S-E upgrade latest IOS images

Similar Messages

Maybe you are looking for