Catalyst 3850 rack mount kit: 3850-RACK-KIT or C3850-4PT-KIT ?

When purchasing a Cisco Catalyst 3850, do we need to buy the rack mounting kit to install it in  a standard 19" rack? 3850-RACK-KIT or C3850-4PT-KIT ? Is the 4-point kit really necessary, can the 3850 hang only on the front of the rack?

No, you don't need the C3850-4PT-KIT.  3850-RACK-KIT comes in the box and it is good enough as long as you rack it nice and tide. The reason some people use C3850-4PT-KIT is because the switch will hang from the back a little when using 3850-RACK-KIT and so if you don't like that than you want the 4PT.
HTH

Similar Messages

  • Rack mount kit - WLC 2100

    What's the Part Number for the Cisco WLC 2100 rack mount kit?
    Thanks in advance.

    Allows for convenient desktop mounting or rack mounting, with optional rack mount kit for flexible deployment.
    http://www.cisco.com/en/US/products/ps7206/products_data_sheet0900aecd805aaab9.html

  • Rack mount kits doesn't fit the depth of Agilent rack

    I have a PXI 1085 Chassis which I want to mount in an Agilent rack.  I purchased the front and rear rack mount kits, the height and width are great, but the depth of my rack doesn’t allow me to use both the front and rear rack mount kits.  Is there some kind of adapter I can buy which will extend the rear rack mount so that it can reach the back?

    Hi Chall,
    Unfortuantely we only offer the kits for a certain size range. If this does not fit your rack then you will have to create a custom rack mount.
    Regards,
    Kaitlin N.
    National Instruments
    Applications Engineer

  • MCS-7835H3-OFFER= Is a rack mounting kit included?

    I have a customer who is getting their MCS7835H2-DMM51K9 server replaced with a MCS-7835H3-OFFER=
    All I need to know is, does the MCS-7835H3-OFFER=  come with a rack mounting kit or not? If not, could the existing MCS7835H2-DMM51K9 server's rails be reused?
    I'm assuming that it's the same chassis but with a faster processor and more mem/disk and would be a straight swap but can anyone clarify if this "H3" part number comes with a rack mount kit?
    Thanks,
    DR

    All currently shipping Cisco MCS 7800 servers include a “generic/third-party rail kit”.
    ● Compliant with 19-inch Industry-standard EIA-310D
    ● Depth range of the slides is from 440mm to 790mm
    ● Threaded racks: M6, 10-32, and 12-24
    ● Also enables punched round and square hole racks
    Cisco Unified Communications Solutions Ordering Guide
    Page 64
    http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf

  • Rack mount kit for SRW208P?

    Hello all -- anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU. Thanks.
    Victor

    Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
    -Tom
    Please mark answered for helpful posts

  • Rack mount Kit for ESW500

    Hi Team,
    Looking that either the rack mount kit for ESW500 is orderable as a spare. I'm not sure if the one for UC520 can fit the ESW500s
    ACS-UC500RM-19=
    https://supportforums.cisco.com/docs/DOC-9698
    Best Regards,
    Sohaib

    Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
    -Tom
    Please mark answered for helpful posts

  • Rail kit for S20 to rack mount

    Does anybody knows a company/provider who has the rail kit that can be used on S20 workstation.
    I am looking for some way to rack S20 and the best way would be using rail kit. I am not interested in the shelf mount.
    Thanks

    the S10/S20 chassis is much too narrow for a typical 4U or 6U rail kit.   you'd need to use a 1U drawer.
    i've never encountered a server farm that didn't allow upright server space outside of the racks.   does the S20 absolutely have to be rack-mounted?
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Extras from the Rack Mount Kit

    With the XServe rack mount kits sending us parts for both the shallow and deep racks, is there something we can do with all the extra parts we do not use? Does apple have a recycle/reuse for them or do we just send them down to the local recycler along with the soda cans from install night?
    I also keep thinking there has to be some good use for that large white plastic shipping cover that comes on the XServe but we only have so many doors needing propped open.
    Any suggestions?

    Your local Apple Authorized Service Provider would probably love them! If you gave them to him free, he would be your new best friend, and you would strike up a relationship with someone who may work with you when it comes time to procure new hardware.

  • Mac Pro Rack Mount Kit?

    Come on Apple.  If you are change from Xserve to Mac Pro for servers, at least offer a rack mount kit or a case that has attachable rails.  I don't want to use 12U of space to stand up a Mac Pro on a shelf in a rack.
    I apologize if you already offer this as an optio, but I sure couldn't find it.

    Some rumor sites are saying that a new Mac Pro cabinet is being developed which will change rack mounting. We may know more about it by the end of the summer.

  • ASA5505 Rack Mount Kit

    May I know the rack mount kit for ASA 5505 released yet? May I have the part number of it?
    Many Thanks!

    I checked with my local SE before, they also haven't any information.
    Because my local SE give me wrong part no of this rack mount kit, I need to provide this part no for replacement!
    Many Thanks!
    Hang

  • Anyone have a used rack mounting kit (076-1234) ?

    I bought a great Early 2008 Xserve from a guy. I'm building it up now with fresh ram, new enterprise hard drives etc. It's coming out great. But I need to get a square hole rack mount kit. I thought that would be the easy part, but they're really hard to find. The only places that carry them online, are price gouging the crap out of them because apple has stopped selling them. I don't need a nice shiny new kit though. A well used, paint-scraped rail kit would be perfect.

    Hi stephenberry,
    I have 2 Right brackets because it was shipped wrongly from a reseller as well. Would you be willing to trade a left bracket for a right bracket?

  • T4-1 rack mount server as a remote server for disaster recovery setup.

    Hi, 
    I would like to ask some basic questions, as Solaris is not my area.
    1)
    T4-1 server is a rack mount server.  Now, we would like to use it for DR purpose.  Can we keep this rack mount server on remote location without conversion kit (to use it as a tower server).
    2)
    As I am new to this, would like to ask a basic question. This T4-1 server has 4 * 300GB hdd.   To expand storage capacity, we would like to add hard disks to this server.  Do we have to add 300gb hard disks only ? or we can add 2 new 600 GB hard disks.
    Thanks

    1) Yes, it does not need to be racked to run.  Putting it on a wire rack should work fine. Just verify the power and cooling requirements.
    2) You can add new internal disks, the system holds up to 8 internal 2.5" disks. Using a zpool, I would consider adding 4 more 600G disks for a RAIDZ pool, though you can add 2 600G disks and mirror them.
    Erik

  • What is part number number for 19" rack mount on 526 controller

    I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet

    Check out this discussion:
    https://supportforums.cisco.com/message/3077633#3077633
    Marcos

  • ASA5585 - which rack mount?

    Sadly dissappointed in the documentation...  
    I would think that one of these parts would be the rack kit used when eliminating the slide rails to fit the 5585 in a narrow rack as described in the hardware installation guide ( http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5585guide/5585Xhw/procedures.html#79288 ) 
    Rack-Mounting the Chassis Using the Fixed Rack Mount
    If you are not able to use the slide rail kit in your rack installation, an optional fixed rack mount solution is available. You can install fixed front and rear rack mount brackets on the ASA 5585-X so that you can easily mount it in a rack.
    OK, that is what I want, but what part is it? Is it one of the three below? Is it something else?
    ASA5585-RAILS=
    ASA 5585 Rail kit
    ASA5585-REAR-RACK=
    ASA 5585-X Rear Rack Mounts (1 pair)
    ASA5585-RACK-KIT=
    ASA 5585-X Front Rack and Rear Rack Kit
    it used to be you could search for a datasheet, but those are now bloated with a bunch of marketing fluff that is not remotely close to being datasheets.

    The RAILS part is the standard slide rail kit with the ball bearings etc. that allows the ASA to slide in and out without unmounting.
    The REAR-RACK is the little guide pieces that attach to the ASA plus the longer bits that attach to the rack's rear posts to give the unit support on the rear. It's sold separately in case someone started out with the kit below but only used the front hardware and the rear bits went missing if/when they decided they should add them.
    The RACK-KIT includes the REAR-RACK pieces plus the big rectangular pieces with ears that attach on the front sides of the ASA and allow you to secure it into your front posts.

  • 2100 rack mount

    Does anyone have a part number for a 2100 rack mount kit, cant find it on Cisco anywhere? Is it the same as for the 526 the ACS-UC500RM-19=

    Hi,
    the Rack-Mount-Kit for the WLC-2100 is the same as the one for the ASA-5505. It's called ASA5505-RACK-MNT=.
    Greets,
    Sebastian

Maybe you are looking for