Catalyst 5000 and 5505: Same backplane?

Fellow switch folk,
I'm curious about the nature of the backplane in the Catalyst 5000 and 5505. Specifically: Is it the same backplane, with the difference between the two being mainly in the supervisor engine?
To put this another way: I know using a Supervisor III in a 5505 enables 3.6Gb worth of crosspoint backbone fabric. Would the same thing happen if I replaced a Supervisor II in a Cat-5000 (five-slot)chassis with a Supervisor III?
Inquiring techies want to know... ;-)
Thanks much.

Well, that kind of helped... It showed me the differences between the 5500 series when using the two different supervisor engines.
However, it made no reference at all to the basic 5000 chassis, and it didn't answer my question about the backplane itself at all.
Thanks for trying, though. Anyone else...?

Similar Messages

  • Error -5000 and: Error when loading the transcode setting

    For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
    Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
    And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

    My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

  • [SOLVED] catalyst-daemon and catalyst-hook are in conflict

    hi
    i want upgrade my system ,  but i see catalyst-hook and catalyst-daemon are in conflict and uneasy not install daemon and hook on system , so what can i do ?
    [root@WhiteCrow1 arash]# pacman -Syu
    :: Starting full system upgrade...
    :: Replace catalyst with catalyst/catalyst-daemon? [Y/n] y
    :: Replace catalyst with catalyst/catalyst-generator? [Y/n] y
    :: Replace catalyst with catalyst/catalyst-hook? [Y/n] y
    resolving dependencies...
    looking for inter-conflicts...
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: catalyst-daemon and catalyst-hook are in conflict
    Last edited by arastoo.s (2011-02-13 14:04:57)

    As far as I know catalyst-daemon and catalyst-hook provide the same module so they are in conflict. The difference is that catalyst-daemon uses a daemon at startup to check for a new kernel and compile a new module when needed. Catalyst-hook does the same thing with a hook.
    I picked the daemon method and just answered no to replace with -hook or -generator (catalyst-generator also conflicts with the others). Just choose the one you like.
    https://wiki.archlinux.org/index.php/AT … D_packages

  • Ask the Expert: Cisco Nexus 2000, 5000, and 6000 Series Switches

    with Cisco Expert Vinayak Sudame
    Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions how to configure and troubleshoot the Cisco Nexus 2000, 5000 and 6000 Series Switches with Cisco subject matter expert Vinayak Sudame. You can ask any question on configuration, troubleshooting, features, design and Fiber Channel over Ethernet (FCoE).
    Vinayak Sudame is a Technical Lead in Data Center Switching Support Team within Cisco's Technical Services in RTP, North Carolina. His current responsibilities include but are not limited to Troubleshooting Technical support problems and Escalations in the areas of Nexus 5000, Nexus 2000, FCoE. Vinayak is also involved in developing technical content for Cisco Internal as well as external. eg, Nexus 5000 Troubleshooting Guide (CCO), Nexus 5000 portal (partners), etc. This involves cross team collaboration and working with multiple different teams within Cisco. Vinayak has also contributed to training account teams and partners in CAE (Customer Assurance Engineering) bootcamp dealing with Nexus 5000 technologies. In the past, Vinayak's responsibilities included supporting MDS platform (Fiber Channel Technologies) and work with EMC support on Escalated MDS cases. Vinayak was the Subject Matter Expert for Santap Technologies before moving to Nexus 5000 support. Vinayak holds a Masters in Electrical Engineering with Specialization in Networking from Wichita State University, Kansas. He also holds Cisco Certification CCIE (#20672) in Routing and Switching.
    Remember to use the rating system to let Vinayak know if you have received an adequate response.
    Vinayak might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the  Data Center sub-community, Other Data Center Topics discussion forum shortly after the event.
    This event last through Friday July 12, 2013. Visit the community often to view responses to youe questions of other community members.

    Hi Vinayak,
    Output of "show cfs internal ethernet-peer database"
    Switch 1
    ETH Fabric
    Switch WWN              logical-if_index
    20:00:54:7f:ee:b7:c2:80 [Local]
    20:00:54:7f:ee:b6:3f:80 16000005
    Total number of entries = 2
    Switch 2
    ETH Fabric
    Switch WWN              logical-if_index
    20:00:54:7f:ee:b6:3f:80 [Local]
    20:00:54:7f:ee:b7:c2:80 16000005
    Total number of entries = 2
    Output of "show system internal csm info trace"
    Switch 1 in which "show cfs peers" show proper output
    Mon Jul  1 05:46:19.145339  (CSM_T) csm_sp_buf_cmd_tbl_expand_range(8604): No range command in buf_cmd_tbl.
    Mon Jul  1 05:46:19.145280  (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
    Mon Jul  1 05:46:19.145188  (CSM_T) csm_sp_handle_local_verify_commit(4291):
    Mon Jul  1 05:46:19.145131  csm_continue_verify_ac[597]: peer is not reachable over CFS so continuing with local verify/commit
    Mon Jul  1 05:46:19.145071  csm_tl_lock(766): Peer information not found for IP address: '172.16.1.54'
    Mon Jul  1 05:46:19.145011  csm_tl_lock(737):
    Mon Jul  1 05:46:19.144955  (CSM_EV) csm_sp_build_tl_lock_req_n_send(941): sending lock-request for CONF_SYNC_TL_SESSION_TYPE_VERIFY subtype 0 to Peer ip = (172.16.1.54)
    Mon Jul  1 05:46:19.143819  (CSM_T) csm_copy_image_and_internal_versions(788): sw_img_ver: 5.2(1)N1(2a), int_rev: 1
    Mon Jul  1 05:46:19.143761  (CSM_T) csm_sp_get_peer_sync_rev(329): found the peer with address=172.16.1.54 and sync_rev=78
    Mon Jul  1 05:46:19.143699  (CSM_T) csm_sp_get_peer_sync_rev(315):
    Mon Jul  1 05:46:19.143641  (CSM_EV) csm_sp_build_tl_lock_req_n_send(838): Entered fn
    Mon Jul  1 05:46:19.143582  (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
    Switch 2 in which "show cfs peers" does not show proper output
    Mon Jul  1 06:13:11.885354  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 77 seq 482
    Mon Jul  1 06:13:11.884992  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 357 seq 369
    Mon Jul  1 06:13:11.884932  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 357 seq 368
    Mon Jul  1 06:13:11.884872  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 357 seq 367
    Mon Jul  1 06:13:11.884811  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 357 seq 366
    Mon Jul  1 06:13:11.884750  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 352 seq 365
    Mon Jul  1 06:13:11.884690  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 352 seq 364
    Mon Jul  1 06:13:11.884630  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 352 seq 363
    Mon Jul  1 06:13:11.884568  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 352 seq 362
    Mon Jul  1 06:13:11.884207  (CSM_EV) csm_sp_acfg_gen_handler(3011):  Preparing config into /tmp/csm_sp_acfg_1733916569.txt
    Mon Jul  1 06:13:11.878695  csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
    Mon Jul  1 06:13:11.878638  (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
    Mon Jul  1 06:12:29.527840  (CSM_T) csm_pss_del_seq_tbl(1989): Freeing seq tbl data
    Mon Jul  1 06:12:29.513255  (CSM_T) csm_sp_acfg_gen_handler(3106): Done acfg file write
    Mon Jul  1 06:12:29.513179  (CSM_EV) csm_sp_acfg_gen_handler(3011):  Preparing config into /tmp/csm_sp_acfg_1733911262.txt
    Mon Jul  1 06:12:29.508859  csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
    Mon Jul  1 06:12:29.508803  (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
    Mon Jul  1 05:53:17.651236  Collecting peer info
    Mon Jul  1 05:53:17.651181  Failed to get the argumentvalue for 'ip-address'
    Mon Jul  1 05:40:59.262736  DB Unlocked Successfully
    Mon Jul  1 05:40:59.262654  Unlocking DB, Lock Owner Details:Client:1 ID:1
    Mon Jul  1 05:40:59.262570  (CSM_T) csm_sp_del_buf_cmd(1713): Deleting comand with Id = 1
    Mon Jul  1 05:40:59.262513  DB Lock Successful by Client:1 ID:1
    Mon Jul  1 05:40:59.262435  Recieved lock request by Client:1 ID:1
    Mon Jul  1 05:40:41.741224  ssnmgr_ssn_handle_create_get: Session FSM already present, ID:1
    Mon Jul  1 05:40:41.741167  ssnmgr_handle_mgmt_request: Create/Get request received for session[process_n5kprof]
    show cfs lock gives no output.
    Just to further clarify, we have 4 5548UP switches in the same management vlan. 2 switches are in one location lets say location A and they are CFS peers and are working fine.
    These two switches which are having problem are in location B. All the switches are in the same vlan. Essentially the all CFS multicast messages will be seen by all 5548 switches as they are in the same vlan. I am assuming that this might not create any problems as we specify the peers in the respective configurations. Or do we have to change the CFSoIPv4 multicast addresses in location B or may be configure a different region.
    Regards.

  • Business Catalyst mail and ios7

    My iphone and iPad email account will not verify. Have set up email with the same settings in Mac Mail and it works fine.  I have  tried resetting password.

    Hello,
    and if i want a blog service, i pay for the difference or the next bigger price bc membership ?
    De : Gaurav Sharma [email protected]
    Envoyé : 28 avril 2014 17:40
    À : visiongrid
    Objet : Business Catalyst tools and services
    Re: Business Catalyst tools and services
    created by Gaurav Sharma <http://forums.adobe.com/people/Gaurav.S>  in Help with using Adobe Muse CC - View the full discussion <http://forums.adobe.com/message/6338716#6338716

  • [SOLVED]catalyst-utils and mesa-libgl are in conflict

    I have this weird issue with pacman, I cant find mesa-libgl (so I cant remove it) and its in conflic with catalyst-utils.
    the ouput of pacman -Syuu
    :: Synchronizing package databases...
    catalyst 9.4 KiB 552K/s 00:00 [#####################################] 100%
    catalyst.sig 287.0 B 0.00B/s 00:00 [#####################################] 100%
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    warning: libpng12: downgrading from version 1.2.50-2 to version 1.2.50-1
    resolving dependencies...
    looking for inter-conflicts...
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: catalyst-utils and mesa-libgl are in conflict
    sudo pacman -R mesa-libgl
    If I search for those mesa packages, noone are marked as installed.
    Last edited by nullwiz (2013-10-03 00:52:07)

    karol wrote:
    nullwiz wrote:Its the same output. How the f*k would I know?
    :: Synchronizing package databases...
    catalyst 9.4 KiB 552K/s 00:00 [#####################################] 100%
    catalyst.sig 287.0 B 0.00B/s 00:00 [#####################################] 100%
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    warning: libpng12: downgrading from version 1.2.50-2 to version 1.2.50-1
    resolving dependencies...
    looking for inter-conflicts...
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: catalyst-utils and mesa-libgl are in conflict
    is clearly not the same as
    :: Synchronizing package databases...
    catalyst is up to date
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    warning: libpng12: local (1.2.50-2) is newer than catalyst (1.2.50-1)
    resolving dependencies...
    looking for inter-conflicts...
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: catalyst-utils and mesa-libgl are in conflict
    The post I linked to https://bbs.archlinux.org/viewtopic.php … 4#p1330764 says
    You're doing an update and something is trying to install mesa-libgl which conflicts with the already installed nvidia-libgl.
    Find out which package is it.
    In your case it conflicts with catalyst-utils, not with nvidia-libgl.
    You cant deny that they are really similiar, I didnt note, my bad.
    How can I find that package?
    I cannot remove catalyst-utils, as I need to use that..
    Yes, I knew it conflicted with catalyst-utils that why I made a new thread. In that thread it got solved by waiting. For me, Im having this problem since some days, and now I got some time to post here and try to fix it.
    thanks

  • SAN Port-Channel between Nexus 5000 and Brocade 5100

    I have a Nexus 5000 running in NPV mode connected to a Brocade 5100 FC switch using two FC ports on a native FC module in the Nexus 5000. I would like to configure these two physical links as one logical link using a SAN Port-Channel/ISL-Trunk. An ISL trunking license is already installed on the Brocade 5100. The Nexus 5000 is running NX-OS 4.2(1), the Brocade 5100 Fabric OS 6.20. Does anybody know if this is a supported configuration? If so, how can this be configured on the Nexus 5000 and the Brocade 5100? Thank you in advance for any comments.
    Best regards,
    Florian

    I tried that and I could see the status light on the ports come on but it still showed not connected.
    I configured another switch (a 3560) with the same config and the same layout with the fiber and I got the connection up on it. I just cant seem to get it on the 4506, would it be something with the supervisor? Could it be wanting to use the 10gb port instead of the 1gb ports?

  • Interconnecting Catalyst 3750 and 2948G-L3

    I am trying to interconnect a Catalyst 3750 and a 2948G-L3 using fiber GBIC. The interfaces where the GBIC and fiber are attached show up as physically down. I have tried different ports and also changed both switches. No Luck. If I connect a 3524 to the 3750 using the same connection it works.
    Are 2948G-L3 switches compatible with the 3750?
    Thanks,
    VT

    Should have no problem. Can you try the following on the 3750's gig interface:
    speed nonegotiate
    See of the link comes up.
    Please rate all posts.

  • Catalyst 3750x and 4510R and Cisco Security Manager

    Hi,
    I just downloaded and install trial (evaluation) version of Cisco Security Manager 4.3. In supported devices list I saw Cisco Catalyst 3750 and 4510R but when I try to add it I got for 3750:
    Invalid device: Device is a switch and cannot be mapped to a Generic Router model.
    Please verify the selected device type, OS version and device configuration
    For 4510R:
    Invalid device: Version 03.03.00.SG (N/A) is not supported for the device type of Cisco Catalyst 4510R Switch Please verify the selected device type, OS version and device configuration
    We need to make a purchase decision but for it we need to import all of our devices and perform some tests.
    Thanks in advance for your replies!
    BR, Vasily.

    I figured this out on my own -- change Compatibility mode of the installer to be Windows 8 (which is same OS version as Windows 2012) and it installs just fine.

  • Catalyst 2960 and SGE500 switches

    Hi,
    Can we  on the same network use Cisco Catalyst 2960 and Cisco SGE500 switches and share the same VLANs ?

    Hi,
    I didn't find VLAN support in key feautures of SGE500 but I'm sure it is there. For VLAN sharing you must configure trunk between switches. The number of VLAN must be the same (exluded some cases).
    For sharing VLAN information (VLAN count, names etc) the switches must support VTP protocol, not sure that SGE500 support it. But VTP is not necessary for trunking between switches.

  • What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in  the current iMacs

    What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in  the current iMacs?

    I am assuming you are talking about PPC Macs? Those haven't been manufactured or sold in years (since early 2006 I believe) when Apple started using Intel processors. There are still some apps which run on PPC code only which makes them incompatible with the last three Mac operating systems.
    There are different Applecare products depending on which Mac product you buy, although the coverage is about the same (except for iOS devices).

  • Catalyst 5000 + Supervisor I or II- what can it do?

    Hello all-
    apologies for the vagueness of this one, but I've been gifted an old but serviceable Catalyst 5000 switch. The only switching module installed is an Ethernet switching module with (IIRC, I'm not in front of it right now) 16 10/100 ports.
    But it does have either a Supervisor I or II module. I'm given to believe from the peron who gave me it (who, incidentally, just used it as a glorified access switch) that this combination can do L3 routing. However, it seems that most information on this has long been deprectaed from the Cisco website, and, for once, Google is not my friend.
    Can anyone recall what this device can do? Does it, for example, know about dot1q trunking, which would be very useful in my lab environment? Any kind of CoS/Qos? And is the Supervisor going to act as an L3 device for me (again, would be very useful)?
    All the best,
    Gary

    Those are layer 2 switches unless you have a layer 3 RSM card to go with it . The capabilities depends on the line cards , you can see what they are capable of by doing a "show port capabilities command . I doubt they have much QOS capability and you would have to have the last catos issued to get the most up to date capabilities. Unless you have the separate RSM card it is L2 only..

  • Extending division 50 to Plant 5000 and sale organization 5000

    Dear  Gurus,
    Currently division 50 is available in plant 1000 and sale organization 1000.
    I need to extend division 50 to sales organization 5000 and plant 5000.
    Kindly provide the step by step procedures to do the same.
    Thanks in advance.
    Regards,
    Rajendran R

    Hi,
    There is no link for Division and the Plant,
    You can assign the Divison to the Sales organisation in the Customizing
    path :
    IMG>ENTERPRISE STRUCTURE>ASSIGNMENTS--->ASSING DIVISIONS TO SALES ORGANISATION
    here you can assign the Division to Sales organisation
    Please let me know if you need more details
    regards,
    santosh

  • My iPod touch is stuck in landscape view.  Even when held vertically if I open facebook or safari is rotates to landscape.  Have tried turning on and off, same results. Any ideas to fix?

    My iPod touch is stuck in landscape view.  Even when held vertically if I open facebook or safari is rotates to landscape.  Have tried turning on and off, same results. Any ideas to fix?

    Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

Maybe you are looking for