Catalyst 5505 conversion from CatOS to IOS
I want to know if somebody has the CatOS to IOS conversion procedure for a Catalyst 5505.
Thank´s a lot
Jorge
The Cat 5000s always run only CATOS. Only the L3 module supports IOS.Only the sup engines on the6500 and7600 support theconversion from CATOS toIOS.
Similar Messages
-
Catalyst 6509 Conversion from CatOS to IOS.
Hi,
I am converting a Cat6509 Sup720 CatOS to IOS.The switch also has a FWSM configured. During converting CatOS to IOS will the FWSM configuration be erased or affected by any means ?
Regards
Kasthere should be no affect or deletion/problems with the FWSM during your IOS conversion.
haven't seen any issues in my LAB. the conversion process has a part where the CatOS commands/config are converted to the IOS commands/config required.
you should make sure you backup the FWSM configuration and partitions before you begin.
please see the following link for the CatOS to IOS conversion tasks for the sup720:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_720 -
6509 conversion from CatOS to IOS
I am interested in hearing from those who have converted from CatOS to IOS using 6500 as primarily a LAN switch with InterVLAN routing. Are there valid reasons / advantages to running IOS over CatOS? It seems to me that the CatOS is more efficient language for configuring switch ports and the IOS is better for configuring routing. I use 6509 in the core for server farms mostly and with the integration of many IOS based switches (3750) I am considering migrating the 6509 to IOS as well.
Thanks,
GregGreg,
Cisco may support CATOS for a while, but I do think that they may end of life it in the future. Thats why there is a big push on the IOS over CATOS.
I feel that the IOS is equally efficient in configuring switch ports as CATOS. You can use interface range commands to configure common parameters to a range of switch ports. And the great thing about configuring switchports in IOS is that it will have the same syntax like your 3750 switches.
Here is a link that compares commands on both switches which will help a lot after migration.
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010e9d5.shtml
Sankar
PS: please rate helpful posts! -
I am about to begin a conversion from CATOS to IOS. I was wondering if I could do the following:
1: Use a new flash card, and format it in an NATIVE IOS Sup720
2: Put the correct code and configuration on it
3: Put it in the Sup32 and rebooted it
Would this then allow the Sup32 to boot up using IOS and not CATOS. I know I may have to copy the configuration from the flash to NVRAM but it seems like the quickest process, instead of the 30 minutes based on CCO documentation.
ThanksI actually just tried this and it workerd. I took a sup32 that was running CATOS. Put in a CF card that was formated in a SUP720 with the IOS image on it. Replaced the on-board CF card with the new one. The system booted and couldn't find and files. I put the boot variable in ROMMON mode and bam up and running. Just had to change the bootvar in IOS and create the new config. Much faster than doing two copies of a 76MB file.
-
Convert Qos commands from CATOS to IOS
Hello,
i've some problems converting some Qos commands from CATos to IOS can anybody help me?
set qos drop-threshold 1q4t rx queue 1 50 60 80 100
set qos map 2q2t tx 1 1 cos 0
set qos map 1p1q4t rx 1 3 cos 4
set qos wrr 1p2q2t 50 255
set qos txq-ratio 1p2q2t 70 15 15
set qos wred 1p2q2t tx queue 1 70:100 70:100
set qos bridged-microflow-policing disable 1,50-54,100-121,500,700-702,1006-1011,1016
set qos policed-dscp-map 1:1
set qos policed-dscp-map excess-rate 0:0
set qos acl default-action ip dscp 0
set qos acl default-action ipx
set qos acl default-action mac
set qos policy-source local
set qos rsvp disable
set qos rsvp policy-timeout 30
set qos rsvp local-policy forward
!Module with GE interfaces
set port qos 3/1-16 cos 0
set port qos 3/1-16 trust trust-cos
set port qos 3/1-16 port-based
set port qos 3/1-16 policy-source local
set qos statistics export port 3/1 disable
set qos statistics export port 3/2 disable
set qos statistics export port 3/3 disable
set qos statistics export port 3/4 disable
set qos statistics export port 3/5 disable
set qos statistics export port 3/6 disable
set qos statistics export port 3/7 disable
set qos statistics export port 3/8 disable
set qos statistics export port 3/9 disable
set qos statistics export port 3/10 disable
set qos statistics export port 3/11 disable
set qos statistics export port 3/12 disable
set qos statistics export port 3/13 disable
set qos statistics export port 3/14 disable
set qos statistics export port 3/15 disable
set qos statistics export port 3/16 disableThis URL should help you:
http://www.cisco.com/warp/public/473/73.html -
Command conversion from CatOS 8.4 to IOS 15.0SY
Upgrading an old 6509 running CatOS to a new 6509E running IOS 15.0SY. The switch is a core switch that does not have any phones plugged into it but does support voip traffic across the enterprise. The qos on the switch is as follows
#qos
set qos enable
set qos map 1p2q2t tx 1 2 cos 0
set qos map 1p2q2t tx 2 1 cos 2
set qos map 1p2q2t tx 2 1 cos 3
set qos map 1p2q2t tx 2 2 cos 6
set qos wrr 1p2q2t 30 70
set qos txq-ratio 1p2q2t 30 40 30
set qos wred 1p2q2t tx queue 1 40:80 80:100
set qos wred 1p2q2t tx queue 2 70:80 80:100
What type of qos should I use on the new switch to achieve the same functionality as the old switch?
ThanksHi
The answer will actually depend on what traffic you want to prioritize and how much you want to prioritize.
Or you have special requirements like limiting the bandwidth or something like that.
I'd say at the initial stage auto qos is the best option and in case you face any issues tweak it accordingly as you go.
Thanks
Ankur
"Please rate the post if found useful" -
CatOS to IOS conversion without RP
We have a Cat 6509 with a WS-SUP32-GE-3B and want to convert the CatOS to IOS. We need to know if we can do the conversion, since we don't have a Route Processor implemented on the switch infrastructure. This environment consists of pure layer 2 switches with stand alone switch processors and no routing capabilities. Everything we've read shows navigating into the RP to load the new image. Would we be capable of converting to IOS in this instance?
Thanks for any help..I am not at the remote site, but this is the show module for the CAT 6509:
Here's the list of modules within the chassis:
Mod Slot Ports Module-Type Model Sub Status
1 1 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
2 2 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
3 3 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
4 4 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
5 5 9 1000BaseX Supervisor WS-SUP32-GE-3B yes ok
6 6 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok -
IMessage - "new conversations from" ios 7 iMessage backups
Hi, So I'm having two issues at the moment but I'll start with the "new conversations" issue. I just upgraded to the 5S and did a iTunes restore on the phone, restored using my backup and then activated iMessage which took a few hours before it actually happened. Any time I try and start a new conversation from my mobile (cell) number, iMessage automatically sends it as a standard SMS message (green) and not as a blue iMessage but when I start the conversation from an email address, iMessage works as normal but from "Messages" on my Macbook, I can send from my mobile number just fine so I'm not sure what's wrong.
The second issue I'm having is that on my Mac, I have way more messages from one of my contacts, they go back quite a while but on my iphone they only go back as far as start of September. Any way how I can get iMessage on my Mac to force sync to my iphone and reload all my messages?
Regards,
Michaelbump. first issue resolved, second I'm still experiencing issues with.
-
Hi,
Does anybody have any experience of using the CatOS to IOS Converter tool on a Sup720?
Just to be clear, I'm not referring to the Configuration conversion tool but to the actual OS conversion tool. The CCO document (http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008070f124.shtml)
indicates the tool was tested on a Sup2 only but i was wondering if it could be used with the Sup720's as well?
If not i assume everyone would suggest the manual method as the preferred method of converting from Hybrid to Native?
ThanksCisco Software Config. Tools for Cat6000:
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-config-converter -
How to open Adobe Reader file from another native IOS application?
There is an existing thread, but I want to re-open it because I think this is an important feature that we need badly. I was wondering if there is any plan to add this feature so we can open PDFs directly into Adobe from the web / other apps.
How to open Adobe Reader file from another native IOS application?
Basically, we just want to use a custom URL scheme to open a specific document in the App. Currently, this only opens the app but does not load the file.
APBNot to hijack the conversation but I can explain why this would be useful for both the above case and another.
What I believe Pavel is talking about is setting up a "URL Scheme" for the Adobe Acrobat iOS application so that you can easily open a PDF specifically in Adobe Acrobat iOS from other native applications and even from web applications opened within Safari. This is particularly useful if your application requires some of the specific features in Adobe Reader iOS to grant them the best experience possible and you want to encourage this.
Another case: If you're using Adobe Livecycle's document security modules (that encrypts PDF files so that Adobe Acrobat must "phone home" to decrypt and view the document), these PDF's can only be viewed inside the Adobe Acrobat application and appear as blank in most other PDF readers. Having a URL scheme allows your application utilising this functionality to have a 1 click step to view the PDF rather than the current non-user friendly process:
- Within Safari, touch the PDF link (appears as blank in the default Safari PDF reader, which in itself is confusing)
- Touch "Open in..."
- Touch "Adobe Acrobat"
We have an immediate need for this functionality for the example above. I can resubmit it in a separate post if necessary. -
I am unable to add a call to make a conference during a conversation from my iphone 4s
I am unable to add a second call to make a conference during a conversation from my iphone 4s with ios 5.1.1. The option to add a call is not accessible (dim) on my phone whereas the same is accessible on my second phone. Both phones have the same carrier which allows conferencing.
My apology for the typo. The plus sign "+" was supposed to be in the quotes in the second sentence.
-
How can you delete some of the text messages from a sender without deleting the entire conversation from that sender? After selecting the message or messages...the top left option is "delete all" and the top right says "cancel". I simply want to save some of the history of the texts and delete those that are no longer needed.
Hey Mari7Can,
Thanks for the follow up. Hmmm…the options should have shown at the bottom of the screen. Let’s try forcing the Messages application to close and restarting your phone:
Force an app to close in iOS - Apple Support
https://support.apple.com/en-us/ht5137
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201559
Thanks,
Matt M. -
Sync old iMessage conversations from iPhone to new iPad & Mac?
I have had my iPhone for a couple years now, and have accumulated a fairly large amount of iMessage conversations from various people. A few days ago, I purchased my first iPad and also updated my Mac to Mountain Lion. By doing so, I now have access to iMessage on three devices in total, whereas before I only had one.
I have managed to setup my devices so that all new iMessages I send and receive are being synced between them. However, is it possible to sync my old iMessage conversations from my iPhone back onto my iPad and Mac?
I would like to do so in order to keep a full record of the past conversations I have had with my contacts.
I have done a bit of research before posting, but the only related topics I found werehttps://discussions.apple.com/message/19095937 andhttps://discussions.apple.com/message/17818920. The former was left unresolved, whereas the latter describes a solution which I am unable to reproduce.
Could anyone shed some light on this for me?Hi,
For me this was very early on in my Mountain Lion days.
I would now say that you cannot sync iMessages from an iOS device that were sent before your linked any Apple ID with the iPhone Number or added the Mac to the use of the Apple ID.
At the point at which and Apple ID is used on both an iPad and the Mac version of Messages becomes it's "Start date"
The same can be said for adding an Apple ID to an iPhone and the Mac.
On the Mac all messages can be saved if you wish.
This are in the .ichat format which you can send to Mac Buddies and then can open them and read them as if they were the chat (i.e they display as "chats').
There appears to be no way in iTunes to access the iMessages (or SMS ones) on the iPhone.
Someone who knows more about the iOS may be able to tell you if they are accessible another way.
8:52 PM Friday; May 24, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Imessage sends messages from email despite selecting phone number for "start new conversations from"
On both my phone and my computer I have selected to start new conversations from my phone number, but just now I continued a conversation from my macbook and it sent it from my email address instead of my phone number! All the other answers I found for this question were outdated, I couldn't find "Caller ID" in settings for iOS 8 or Yosemite.
If this is a continuing conversation, I don't believe the device looks at it as a new conversation, which is what that setting is for, from what I understand. If there is a checkmark by the phone number on all devices, then it should start there, but if the conversation was originally started from the email, I believe it will continue until you start a new conversation.
-
I have my home network running with a Cisco Catalyst 5505 chassis..it has a Supervisor II module, and a ws-x5302 Route Switch Module. I use the chassis because I am learning Cisco technology. Because my Comcast ISP requires DHCP, I'm trying to configure it to use DHCP to get the IP address for the VLAN that goes to the internet. However, it seems it doesnt support the "ip address dhcp" command in interface configuration mode. Is there something I need to add, or is there software that needs to be updated? The sh version command on my RSM displays Cisco Internetwork Operating System Software
IOS (tm) C5RSM Software (C5RSM-ISV-M), Version 12.2(34), RELEASE SOFTWARE (fc1.) Was wondering what I need to do?Currently I have to use a linksys router between the Catalyst and the Cable modem just because of the DHCP.
Maybe you are looking for
-
How to connect DVD player to FIOS TV (with standard TV)
The Verizon techs installed my FIOS system. I already have the router, DVR and standard TV connected and working. How do I add a DVD player to the mix? I found wiring diagrams for my FIOS DVR, but they do not include my configuration. Here is what I
-
I didn't check the requirements and lost my older version of Firefox. All I have is an icon that is crossed out. Attempts to download an older version have so far failed. When trying to install, I am asked for an "application" to run the file.
-
Computer reboots during install solaris 8 ,i solve it
i install solaris 8 on DELL DIMENSION and machine reboots when screen show like :(using b kadb -v) pci-device: ide@1,ata1 ata1 is /pci@0,0,pci-ide@f/ide@1 sd0 at ata1: target 0 lun 0 sd0 is /pci@0,0/pci-ide@f/ide@1/sd@0,0 cannot mount root on /pci@0,
-
Google says iOS Google Maps in App Store hopefully "before Christmas"
may be some good news? http://www.ubergizmo.com/2012/09/google-says-ios-google-maps-in-app-store-hopefu lly-before-christmas/?utm_source=mainrss
-
Rounding differences - translation in BCS to thousands
Hello everybody, We translate the figures from Local currency (ILS) to thousands Local currency (we created new currency code u2013TILS). We maintained conversion factor of 1:1000 and translation rate 1:1. The client insist the figures in Group curr