Catalyst Control Center crashes with new video driver update

Hi Folks,
I just updated to the newest rev of the ATI driver (April 28, 2009).  Now, catalyst control center crashes at startup, opening a dialog box that says, "catalyst control center monitoring program has encountered a problem and needs to close".
Has anyone else run into this?  Any ideas on how to fix it?
Thanks,
Allie
T400 2764-CTO, XP

Please post the details of your problem with the 8.563 driver in this thread.
Use the format from  this post.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Similar Messages

  • Catalyst Control Center stopped working properly after widows update

    When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC. 

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7).  Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7).  Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • [SOLVED] Gnome-control-center crash with vmware drivers

    Since a week or two, I've been unable to launch gnome control center due to the following crash. I think the issue is related to the vmware graphics driver with hardware acceleration, but before I file a bug, I'd like someone more knowledgeable than myself to confirm that I'm not missing something obvious
    Here is the crash trace:
    [joel@myhost ~]$ gnome-control-center
    *** glibc detected *** gnome-control-center: free(): invalid pointer: 0xaf591288 ***
    ======= Backtrace: =========
    /lib/libc.so.6(+0x726a2)[0xb6b9e6a2]
    /usr/lib/libstdc++.so.6(_ZdlPv+0x1f)[0xb178c38f]
    /usr/lib/libstdc++.so.6(_ZNSs4_Rep10_M_destroyERKSaIcE+0x1b)[0xb17f588b]
    /usr/lib/libstdc++.so.6(+0xb08d0)[0xb17f58d0]
    /usr/lib/libstdc++.so.6(_ZNSs7reserveEj+0x88)[0xb17f6b88]
    /usr/lib/libstdc++.so.6(_ZNSs6appendEPKcj+0xaa)[0xb17f6e8a]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(_ZN4llvm3sys13getHostTripleEv+0xb4)[0xb09aa0b4]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(_ZN4llvm13EngineBuilder12selectTargetEPNS_6ModuleENS_9StringRefES3_RKNS_15SmallVectorImplISsEENS_5Reloc5ModelENS_9CodeModel5ModelEPSs+0x347)[0xb0285d57]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(_ZN4llvm13EngineBuilder6createEv+0xe9)[0xb0278999]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(LLVMCreateJITCompilerForModule+0x96)[0xb0284fb6]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(LLVMCreateJITCompiler+0x33)[0xb0285213]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x393752)[0xb0225752]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x393853)[0xb0225853]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x316785)[0xb01a8785]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x154c6c)[0xaffe6c6c]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x14d24a)[0xaffdf24a]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x1650e8)[0xafff70e8]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x137bfd)[0xaffc9bfd]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x133999)[0xaffc5999]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x133ae7)[0xaffc5ae7]
    /usr/lib/xorg/modules/dri/vmwgfx_dri.so(+0x133b1f)[0xaffc5b1f]
    /usr/lib/libGL.so.1(+0x40606)[0xb2e07606]
    /usr/lib/libGL.so.1(+0x181f1)[0xb2ddf1f1]
    /usr/lib/libGL.so.1(glXCreateNewContext+0x43)[0xb2ddf433]
    /usr/lib/libcogl.so.9(+0x631f5)[0xb0e1b1f5]
    /usr/lib/libcogl.so.9(cogl_display_setup+0x34)[0xb0dd2e54]
    /usr/lib/libcogl.so.9(cogl_renderer_check_onscreen_template+0x6e)[0xb0dd261e]
    /usr/lib/libclutter-1.0.so.0(+0x23802)[0xb0e65802]
    /usr/lib/libclutter-1.0.so.0(+0x565bc)[0xb0e985bc]
    /usr/lib/libclutter-1.0.so.0(+0x56ce7)[0xb0e98ce7]
    /usr/lib/libclutter-1.0.so.0(+0x70182)[0xb0eb2182]
    /usr/lib/libclutter-1.0.so.0(+0x7ca8d)[0xb0ebea8d]
    /usr/lib/libclutter-1.0.so.0(+0x7ccdd)[0xb0ebecdd]
    /usr/lib/libglib-2.0.so.0(g_option_context_parse+0x3fa)[0xb6e7239a]
    /usr/lib/libclutter-1.0.so.0(clutter_init+0xde)[0xb0ebf05e]
    /usr/lib/libclutter-gtk-1.0.so.0(gtk_clutter_init+0x9d)[0xb0f7625d]
    /usr/lib/libcheese-gtk.so.21(cheese_gtk_init+0x33)[0xb10f2693]
    /usr/lib/control-center-1/panels/libuser-accounts.so(g_io_module_load+0x54)[0xb10c2674]
    /usr/lib/libgio-2.0.so.0(+0x52f0e)[0xb6fbaf0e]
    /usr/lib/libgobject-2.0.so.0(g_type_module_use+0xa6)[0xb6f4cde6]
    /usr/lib/libgio-2.0.so.0(g_io_modules_load_all_in_directory_with_scope+0xa9)[0xb6fbb3a9]
    /usr/lib/libgio-2.0.so.0(g_io_modules_load_all_in_directory+0x23)[0xb6fbb463]
    gnome-control-center[0x804fc72]
    /usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x117)[0xb6f49c97]
    /usr/lib/libgobject-2.0.so.0(+0x12491)[0xb6f2c491]
    /usr/lib/libgobject-2.0.so.0(g_object_newv+0x7d9)[0xb6f2e179]
    /usr/lib/libgobject-2.0.so.0(g_object_new+0xa8)[0xb6f2e718]
    gnome-control-center(gnome_control_center_new+0x18)[0x8050528]
    gnome-control-center(main+0x89)[0x804dc79]
    /lib/libc.so.6(__libc_start_main+0xf5)[0xb6b453d5]
    gnome-control-center[0x804dd45]
    ======= Memory map: ========
    08048000-08058000 r-xp 00000000 08:03 270323 /usr/bin/gnome-control-center
    08058000-08059000 r--p 0000f000 08:03 270323 /usr/bin/gnome-control-center
    08059000-0805a000 rw-p 00010000 08:03 270323 /usr/bin/gnome-control-center
    09988000-09c43000 rw-p 00000000 00:00 0 [heap]
    ae571000-af571000 rw-s 104543000 00:05 1668 /dev/dri/card0
    af571000-af691000 rw-p 00000000 00:00 0
    af691000-af692000 ---p 00000000 00:00 0
    af692000-afe92000 rw-p 00000000 00:00 0
    afe92000-b0c6b000 r-xp 00000000 08:03 425438 /usr/lib/xorg/modules/dri/vmwgfx_dri.so
    b0c6b000-b0c89000 r--p 00dd9000 08:03 425438 /usr/lib/xorg/modules/dri/vmwgfx_dri.so
    b0c89000-b0cb5000 rw-p 00df7000 08:03 425438 /usr/lib/xorg/modules/dri/vmwgfx_dri.so
    b0cb5000-b0d15000 rw-p 00000000 00:00 0
    b0d15000-b0d1a000 r-xp 00000000 08:03 267525 /usr/lib/libxcb-util.so.0.0.0
    b0d1a000-b0d1b000 r--p 00004000 08:03 267525 /usr/lib/libxcb-util.so.0.0.0
    b0d1b000-b0d1c000 rw-p 00005000 08:03 267525 /usr/lib/libxcb-util.so.0.0.0
    b0d1c000-b0d25000 r-xp 00000000 08:03 267538 /usr/lib/libstartup-notification-1.so.0.0.0
    b0d25000-b0d26000 r--p 00008000 08:03 267538 /usr/lib/libstartup-notification-1.so.0.0.0
    b0d26000-b0d27000 rw-p 00009000 08:03 267538 /usr/lib/libstartup-notification-1.so.0.0.0
    b0d27000-b0d5a000 r-xp 00000000 08:03 338954 /usr/lib/libgsttag-0.10.so.0.25.0
    b0d5a000-b0d5b000 ---p 00033000 08:03 338954 /usr/lib/libgsttag-0.10.so.0.25.0
    b0d5b000-b0d5c000 r--p 00033000 08:03 338954 /usr/lib/libgsttag-0.10.so.0.25.0
    b0d5c000-b0d5d000 rw-p 00034000 08:03 338954 /usr/lib/libgsttag-0.10.so.0.25.0
    b0d5d000-b0d61000 r-xp 00000000 08:03 131242 /lib/libattr.so.1.1.0
    b0d61000-b0d62000 rw-p 00003000 08:03 131242 /lib/libattr.so.1.1.0
    b0d62000-b0db5000 r-xp 00000000 08:03 274843 /usr/lib/libgee.so.2.0.0
    b0db5000-b0db7000 r--p 00052000 08:03 274843 /usr/lib/libgee.so.2.0.0
    b0db7000-b0db8000 rw-p 00054000 08:03 274843 /usr/lib/libgee.so.2.0.0
    b0db8000-b0e3f000 r-xp 00000000 08:03 295043 /usr/lib/libcogl.so.9.1.1
    b0e3f000-b0e41000 r--p 00087000 08:03 295043 /usr/lib/libcogl.so.9.1.1
    b0e41000-b0e42000 rw-p 00089000 08:03 295043 /usr/lib/libcogl.so.9.1.1
    b0e42000-b0f6a000 r-xp 00000000 08:03 295058 /usr/lib/libclutter-1.0.so.0.1000.2
    b0f6a000-b0f6b000 ---p 00128000 08:03 295058 /usr/lib/libclutter-1.0.so.0.1000.2
    b0f6b000-b0f6d000 r--p 00128000 08:03 295058 /usr/lib/libclutter-1.0.so.0.1000.2
    b0f6d000-b0f6f000 rw-p 0012a000 08:03 295058 /usr/lib/libclutter-1.0.so.0.1000.2
    b0f6f000-b0f79000 r-xp 00000000 08:03 263872 /usr/lib/libclutter-gtk-1.0.so.0.0.0
    b0f79000-b0f7a000 r--p 00009000 08:03 263872 /usr/lib/libclutter-gtk-1.0.so.0.0.0
    b0f7a000-b0f7b000 rw-p 0000a000 08:03 263872 /usr/lib/libclutter-gtk-1.0.so.0.0.0
    b0f7b000-b1016000 r-xp 00000000 08:03 285322 /usr/lib/libmx-1.0.so.2.401.0
    b1016000-b1017000 r--p 0009a000 08:03 285322 /usr/lib/libmx-1.0.so.2.401.0
    b1017000-b1019000 rw-p 0009b000 08:03 285322 /usr/lib/libmx-1.0.so.2.401.0
    b1019000-b102b000 r-xp 00000000 08:03 263863 /usr/lib/libclutter-gst-1.0.so.0.504.0
    b102b000-b102c000 ---p 00012000 08:03 263863 /usr/lib/libclutter-gst-1.0.so.0.504.0
    b102c000-b102d000 r--p 00012000 08:03 263863 /usr/lib/libclutter-gst-1.0.so.0.504.0
    b102d000-b102e000 rw-p 00013000 08:03 263863 /usr/lib/libclutter-gst-1.0.so.0.504.0
    b102e000-b103d000 r-xp 00000000 08:03 285335 /usr/lib/libcheese.so.3.2.4
    b103d000-b103e000 r--p 0000e000 08:03 285335 /usr/lib/libcheese.so.3.2.4
    b103e000-b103f000 rw-p 0000f000 08:03 285335 /usr/lib/libcheese.so.3.2.4
    b103f000-b1047000 r-xp 00000000 08:03 131109 /lib/libcrypt-2.15.so
    b1047000-b1048000 r--p 00007000 08:03 131109 /lib/libcrypt-2.15.so
    b1048000-b1049000 rw-p 00008000 08:03 131109 /lib/libcrypt-2.15.so
    b1049000-b1070000 rw-p 00000000 00:00 0
    b1070000-b107a000 r-xp 00000000 08:03 306123 /usr/lib/libsystemd-login.so.0.2.1
    b107a000-b107b000 r--p 00009000 08:03 306123 /usr/lib/libsystemd-login.so.0.2.1
    b107b000-b107c000 rw-p 0000a000 08:03 306123 /usr/lib/libsystemd-login.so.0.2.1
    b1094000-b10a4000 rw-p 00000000 00:00 0
    b10a4000-b10cf000 r-xp 00000000 08:03 406404 /usr/lib/control-center-1/panels/libuser-accounts.so
    b10cf000-b10d0000 r--p 0002a000 08:03 406404 /usr/lib/control-center-1/panels/libuser-accounts.so
    b10d0000-b10d1000 rw-p 0002b000 08:03 406404 /usr/lib/control-center-1/panels/libuser-accounts.so
    b10d1000-b10e2000 r-xp 00000000 08:03 300283 /usr/lib/libgtop-2.0.so.7.2.0
    b10e2000-b10e3000 r--p 00010000 08:03 300283 /usr/lib/libgtop-2.0.so.7.2.0
    b10e3000-b10e4000 rw-p 00011000 08:03 300283 /usr/lib/libgtop-2.0.so.7.2.0
    b10e4000-b10ea000 r-xp 00000000 08:03 295044 /usr/lib/libcogl-pango.so.0.0.0
    b10ea000-b10eb000 r--p 00005000 08:03 295044 /usr/lib/libcogl-pango.so.0.0.0
    b10eb000-b10ec000 rw-p 00006000 08:03 295044 /usr/lib/libcogl-pango.so.0.0.0
    b10ec000-b10f8000 r-xp 00000000 08:03 285336 /usr/lib/libcheese-gtk.so.21.1.4
    b10f8000-b10f9000 r--p 0000b000 08:03 285336 /usr/lib/libcheese-gtk.so.21.1.4
    b10f9000-b10fa000 rw-p 0000c000 08:03 285336 /usr/lib/libcheese-gtk.so.21.1.4
    b10fa000-b110a000 r-xp 00000000 08:03 406405 /usr/lib/control-center-1/panels/libdate_time.so
    b110a000-b110b000 r--p 0000f000 08:03 406405 /usr/lib/control-center-1/panels/libdate_time.so
    b110b000-b110c000 rw-p 00010000 08:03 406405 /usr/lib/control-center-1/panels/libdate_time.so
    b110c000-b1116000 r-xp 00000000 08:03 406400 /usr/lib/control-center-1/panels/libinfo.so
    b1116000-b1117000 r--p 00009000 08:03 406400 /usr/lib/control-center-1/panels/libinfo.so
    b1117000-b1118000 rw-p 0000a000 08:03 406400 /usr/lib/control-center-1/panels/libinfo.so
    b1118000-b1125000 r-xp 00000000 08:03 308961 /usr/lib/libsocialweb-client.so.2.0.0
    b1125000-b1126000 r--p 0000c000 08:03 308961 /usr/lib/libsocialweb-client.so.2.0.0
    b1126000-b1127000 rw-p 0000d000 08:03 308961 /usr/lib/libsocialweb-client.so.2.0.0
    b112a000-b1135000 r-xp 00000000 08:03 406402 /usr/lib/control-center-1/panels/libkeyboard.so
    b1135000-b1136000 r--p 0000a000 08:03 406402 /usr/lib/control-center-1/panels/libkeyboard.so
    b1136000-b1137000 rw-p 0000b000 08:03 406402 /usr/lib/control-center-1/panels/libkeyboard.so
    b1137000-b114d000 r-xp 00000000 08:03 406406 /usr/lib/control-center-1/panels/libwacom-properties.so
    b114d000-b114e000 r--p 00015000 08:03 406406 /usr/lib/control-center-1/panels/libwacom-properties.so
    b114e000-b114f000 rw-p 00016000 08:03 406406 /usr/lib/control-center-1/panels/libwacom-properties.so
    b114f000-b1173000 r-xp 00000000 08:03 286226 /usr/lib/libxkbfile.so.1.0.2
    b1173000-b1174000 r--p 00023000 08:03 286226 /usr/lib/libxkbfile.so.1.0.2
    b1174000-b1175000 rw-p 00024000 08:03 286226 /usr/lib/libxkbfile.so.1.0.2
    b1175000-b1190000 r-xp 00000000 08:03 297262 /usr/lib/libxklavier.so.16.2.0
    b1190000-b1191000 r--p 0001a000 08:03 297262 /usr/lib/libxklavier.so.16.2.0
    b1191000-b1192000 rw-p 0001b000 08:03 297262 /usr/lib/libxklavier.so.16.2.0
    b1192000-b11a6000 r-xp 00000000 08:03 289381 /usr/lib/libgnomekbdui.so.7.0.0
    b11a6000-b11a7000 r--p 00013000 08:03 289381 /usr/lib/libgnomekbdui.so.7.0.0
    b11a7000-b11a8000 rw-p 00014000 08:03 289381 /usr/lib/libgnomekbdui.so.7.0.0
    b11a9000-b11ad000 r-xp 00000000 08:03 131260 /lib/libcap.so.2.22
    b11ad000-b11ae000 rw-p 00003000 08:03 131260 /lib/libcap.so.2.22
    b11ae000-b11b0000 r-xp 00000000 08:03 306121 /usr/lib/libsystemd-daemon.so.0.0.1
    b11b0000-b11b1000 r--p 00001000 08:03 306121 /usr/lib/libsystemd-daemon.so.0.0.1
    b11b1000-b11b2000 rw-p 00002000 08:03 306121 /usr/lib/libsystemd-daemon.so.0.0.1
    b11b2000-b11ba000 r-xp 00000000 08:03 274291 /usr/lib/libgudev-1.0.so.0.1.1
    b11ba000-b11bb000 r--p 00007000 08:03 274291 /usr/lib/libgudev-1.0.so.0.1.1
    b11bb000-b11bc000 rw-p 00008000 08:03 274291 /usr/lib/libgudev-1.0.so.0.1.1
    b11bc000-b11ce000 r-xp 00000000 08:03 394484 /usr/lib/control-center-1/panels/libbackground.so
    b11ce000-b11cf000 r--p 00012000 08:03 394484 /usr/lib/control-center-1/panels/libbackground.so
    b11cf000-b11d0000 rw-p 00013000 08:03 394484 /usr/lib/control-center-1/panels/libbackground.so
    b11d0000-b11e0000 r-xp 00000000 08:03 275743 /usr/lib/libp11-kit.so.0.0.0
    b11e0000-b11e1000 r--p 0000f000 08:03 275743 /usr/lib/libp11-kit.so.0.0.0
    b11e1000-b11e2000 rw-p 00010000 08:03 275743 /usr/lib/libp11-kit.so.0.0.0
    b11e2000-b1243000 r-xp 00000000 08:03 263355 /usr/lib/libgmp.so.10.0.4
    b1243000-b1244000 r--p 00061000 08:03 263355 /usr/lib/libgmp.so.10.0.4
    b1244000-b124b000 rw-p 00062000 08:03 263355 /usr/lib/libgmp.so.10.0.4
    b124b000-b125d000 r-xp 00000000 08:03 269240 /usr/lib/libhogweed.so.2.1
    b125d000-b125e000 r--p 00011000 08:03 269240 /usr/lib/libhogweed.so.2.1
    b125e000-b125f000 rw-p 00012000 08:03 269240 /usr/lib/libhogweed.so.2.1
    b125f000-b1286000 r-xp 00000000 08:03 269322 /usr/lib/libnettle.so.4.3
    b1286000-b1287000 r--p 00026000 08:03 269322 /usr/lib/libnettle.so.4.3
    b1287000-b1288000 rw-p 00027000 08:03 269322 /usr/lib/libnettle.so.4.3
    b1288000-b1298000 r-xp 00000000 08:03 269192 /usr/lib/libtasn1.so.3.1.15
    b1298000-b1299000 r--p 0000f000 08:03 269192 /usr/lib/libtasn1.so.3.1.15
    b1299000-b129a000 rw-p 00010000 08:03 269192 /usr/lib/libtasn1.so.3.1.15
    b129a000-b12a2000 r-xp 00000000 08:03 276807 /usr/lib/libkrb5support.so.0.1
    b12a2000-b12a3000 r--p 00007000 08:03 276807 /usr/lib/libkrb5support.so.0.1
    b12a3000-b12a4000 rw-p 00008000 08:03 276807 /usr/lib/libkrb5support.so.0.1
    b12a4000-b12cc000 r-xp 00000000 08:03 276811 /usr/lib/libk5crypto.so.3.1
    b12cc000-b12cd000 r--p 00028000 08:03 276811 /usr/lib/libk5crypto.so.3.1
    b12cd000-b12ce000 rw-p 00029000 08:03 276811 /usr/lib/libk5crypto.so.3.1
    b12ce000-b12cf000 rw-p 00000000 00:00 0
    b12cf000-b13a6000 r-xp 00000000 08:03 276805 /usr/lib/libkrb5.so.3.3
    b13a6000-b13a7000 ---p 000d7000 08:03 276805 /usr/lib/libkrb5.so.3.3
    b13a7000-b13ad000 r--p 000d7000 08:03 276805 /usr/lib/libkrb5.so.3.3
    b13ad000-b13ae000 rw-p 000dd000 08:03 276805 /usr/lib/libkrb5.so.3.3
    b13ae000-b13be000 r-xp 00000000 08:03 267193 /usr/lib/libavahi-client.so.3.2.9
    b13be000-b13bf000 r--p 0000f000 08:03 267193 /usr/lib/libavahi-client.so.3.2.9
    b13bf000-b13c0000 rw-p 00010000 08:03 267193 /usr/lib/libavahi-client.so.3.2.9
    b13c0000-b13cc000 r-xp 00000000 08:03 267196 /usr/lib/libavahi-common.so.3.5.3
    b13cc000-b13cd000 r--p 0000b000 08:03 267196 /usr/lib/libavahi-common.so.3.5.3
    b13cd000-b13ce000 rw-p 0000c000 08:03 267196 /usr/lib/libavahi-common.so.3.5.3
    b13ce000-b14c8000 r-xp 00000000 08:03 276993 /usr/lib/libgnutls.so.28.8.1
    b14c8000-b14cd000 r--p 000fa000 08:03 276993 /usr/lib/libgnutls.so.28.8.1
    b14cd000-b14ce000 rw-p 000ff000 08:03 276993 /usr/lib/libgnutls.so.28.8.1
    b14ce000-b14cf000 rw-p 00000000 00:00 0
    b14cf000-b150e000 r-xp 00000000 08:03 276825 /usr/lib/libgssapi_krb5.so.2.2
    b150e000-b150f000 ---p 0003f000 08:03 276825 /usr/lib/libgssapi_krb5.so.2.2
    b150f000-b1510000 r--p 0003f000 08:03 276825 /usr/lib/libgssapi_krb5.so.2.2
    b1510000-b1511000 rw-p 00040000 08:03 276825 /usr/lib/libgssapi_krb5.so.2.2
    b1511000-b1561000 r-xp 00000000 08:03 285470 /usr/lib/libcups.so.2
    b1561000-b1564000 r--p 0004f000 08:03 285470 /usr/lib/libcups.so.2
    b1564000-b1565000 rw-p 00052000 08:03 285470 /usr/lib/libcups.so.2
    b1565000-b157f000 r-xp 00000000 08:03 297089 /usr/lib/libpolkit-gobject-1.so.0.0.0
    b157f000-b1580000 r--p 00019000 08:03 297089 /usr/lib/libpolkit-gobject-1.so.0.0.0
    b1580000-b1581000 rw-p 0001a000 08:03 297089 /usr/lib/libpolkit-gobject-1.so.0.0.0Aborted
    Last edited by lardon (2012-05-09 11:23:26)

    lardon wrote:That's the definition of cluttering the system. It will make the control panel slower for the rest of the lifetime of the system, since I will forget about it as soon as it works.
    I reject that definition, being as it's not a definition :\ furthermore, editing a launcher is not clutter, it is simply editing a launcher.
    Clutter (organizing), a confusing or disorderly state or collection, and possible symptom of compulsive hoarding
    I don't know where you get editing 1 launcher as 'clutter'.
    and FYI there was a gnome-control-center update today, so if you can't remember changing a setting for all of about a day or two, that's pretty bad dude.
    cheerz
    Last edited by triplesquarednine (2012-05-07 03:26:55)

  • Catalyst Control Center crashing on start-up

    Every time I start up my laptop Catalyst Control Centre and its subsidiary apps keeps crashing and it shows in taskbar "Error Reporting Icon"
    eg = MOM.exe
    eg = Catalyst Control Centre Launcher.exe
    Even if I try to reload the application manually then my laptop hangs and freezes for a while before returning to normal functioning.

    You never mentioned what type of graphics adapter you have, but here are a few things you can try. Uninstall the software package, re-boot your computer and double check that the software package actually un-installed. Sometimes when you do the software
    installation a few times, you will get a ghost copy on your system. As ATI/AMD is dependent on MS .Net Framework, go into your Control Panel, Programs and Features, then on the left side, go into Turn Windows Features On or Off. In there you want to make
    sure .Net Framework 3.5 is enabled. You can try to re-install your ATI/AMD software package again at this point.

  • X100e "Catalyst Control Center Monitoring Program"

    Whenever I boot my ThinkPad X100e I get the following message "Catalyst Control Center Monitoring Program has stopped working"
    Does anyone know how I can fix it?
    I am not positive but I think this is the cause of overall slow performance (especially with video).
    Thanks in advance for your help.

    Hi,
    Welcome to Lenovo Community Forums!
    I’m really sorry to hear that you are getting an error stating “Catalyst Control Center Monitoring Program has stopped working” when you boot your Lenovo ThinkPad X100e.
    I would suggest you to uninstall the Catalyst Control Center/drivers, download the latest version of the Catalyst Control Center/drivers for your video card from Lenovo Support page and install the same. Enter MTM number in quick path and find the driver under display and video graphics category.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite A100-237: I do not have the Catalyst Control Center after driver installation

    Hello,
    I use a Satellite A100-237 laptop. 1.83 GHz Core Duo, Ati Mobility Radeon X1600 512MB Hypermemory, 1.5GB DDR2 RAM.
    My laptop now seems to use only the own 256 MB RAM (Graphic card's own RAM).
    I purchased Need for Speed Carbon and installed it to my laptop.
    When I tried to open the game, a blue screen appeared for less than 1 seconds, and than system restarted. Windows said that that was a critical error and a driver stopped Windows XP to operate, therefore system is restarted.
    I searched in the net for this problem and, people said that, when they updated the driver the problem is solved.
    I downloaded Display driver 8.241 (download file name: display_xp-8241.zip) from toshiba-europe.com.
    Driver installed but while installing ATI Catalyst Control Center, at a point the installation process stoped continuing. I had to end the task after a while.
    It said that driver is installed and system must be restarted.
    Now the game works, thats not the problem, however I do not have the Catalyst Control Center. (Where I recently use it for connecting other screens to my laptop)
    How can I solve this problem?
    Sorry for long letter,
    Thanks for helps.

    You may run the driver installer again, use the custom installation option and select Catalyst Control Center only. Alternatively, you may remove the entire driver and try re-installing again. I suggest you also download the notebook driver package from ATI's website instead of Toshiba, as their drivers are usually more up-to-date (although it might be less safe to use them, I don't know).
    And BTW, I have the same notebook and I have failed to see an option to set the machine to use the VRAM *only* instead of borrowing from RAM whenever necessary. Any ideas?

  • ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

    I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
    And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
    Thank you in advance.

    Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

  • T400, cannot start Catalyst Control Center - error "active GPU not supported"

    on a t400 machine running vista business 64 bit.
    last week all was hunky dory.  this week, when i try to open my ati catalyst control center (CCC), i receive the following error:
    "ATI catalyst control center cannot be started because the currently active gpu is not supported"
    i've read some posts about this problem stemming from not using the ATI graphics card and rather being on the integrated graphics card.  the posts indicated i could reenable CCC simply by clicking on the battery icon in the system tray and selecting "high performance mode" to force the machine to use the discrete graphics card.  after i do this, and then try to start CCC, i receive the same error as above.  also, at this point after the switch to high peformance mode, my device manager lists "mobile intel(r) 4 series express chipset family" as my display adapter still.  if i left or right click on the battery icon in the tray, i do not see any options for switching cards explicitly.
    the video driver for the mobile intel 4 adapter is listed as being from ATI at version 8.520.4.4000.
    i am not sure of my driver version for the ATI card.  nor do i know where to look for it.
    to my knowledge, nothing aside from a number of "critical" windows updates have changed on my system between the time CCC was working last week and now.  
    any suggestions as to how to fix this?  and what caused it to stop working?
    thanks in advance for any help. 
    Solved!
    Go to Solution.

    i finally figured it out.  and no new drivers or reinstalls were necessary.  in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining).  from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance.  if from there i select high performance, i can then open CCC. 
    the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine).  once you have that on, you can explicitly switch the graphics cards.  
    the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week.  so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually.  weird.
    slip, thanks for you help.  i appreciate it.  and that is an interesting note about freeing up more memory by disabling the switchable graphics.  i will probably give this a shot and see how i like.  more available memory never hurts!
    thanks again to everybody that helped out.

  • HP DV7 6135dx. Can't install ATI Catalyst Control Center. Need help!

    Hi! Have laptop HP DV7-6135dx. Windows 7 x64 Ultimate.  I can't install Catalyst Control Center.I see in "Hardware" Mobile Intel(R) HD Graphics and Radeon (TM) HD 6490M like video adapters. Both this cards look like drivers installed completely.
     I'm trying to install CCC to have choice to select one or another card.I've download all video drivers for this laptop model.I've try to install:1. AMD High-Definition Graphics Driver 8.830.6.2000 Rev. Oct 5, 20142. AMD High-Definition Graphics Driver 8.882.2.3000 Jul 31, 20143. Reference driver 12-10_mobility_vista_win7_win8_64_dd_ccc_whql_net44. Autodetect ATI Driver Software and it was install some driver.Always i have error message "Application Install:install package error" and installation process interrupted.  I've try to fully uninstall all video drivers and install them from beginign, have try to clean system and registry by CCleaner, i think i've try everything but can't install CCC. It's always stuck with error.This is log ATI CCC screen  Before i have install new Windows 7 i have seen on previous Windows 7 Catalyst....I don't know why i can install it. Can you help me please? 

    , Hello and thanks for posting on the HP support forums.  If you are downloading this from the AMD site it may not work.  The video chipset is built by AMD Radeon however it is propriatary.  Unless you download the software for the system from the notebooks support site it may not work.  As well you have to check to see if that notebook was released or was given windows 7 as an os. Here is the link to the support page. HP Pavilion dv7-6135dx Entertainment Notebook PC - Software and Drivers If your system came with it pre- loaded then you can do a system recovery to get it back.  You will have to back up all your data before this. HP PCs - Performing an HP system recovery (Windows 7) Please let me know how things go.  Thanks again for posting and have a great day.

  • ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

    Hey all,
    I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

    I have posted a message "White screen of death and computer halts with ATI 4870 in Boot Camp"
    I bought the 4870 and ANYTHING I do causes the system to halt and go to a white screen before even attempts to go into windows.
    I have called Mac AND gone to a shop. I took the NVIDIA out of my MAc Pro and put in the 4870 and works GREAT in Mac but as soon as hold down the Option key to get the option to select Mac or Windows it halts system when push Windows before even attempts to load Windows.
    I went so far as to take ALL hard disks out of system but a new one and put a Vists dvd in drive and try to install it.... Also tried Windows 7 and xp. NONE work... as soon as click the dvd the system halts. So this supposed upgrade just doesn't work.
    I haven't found anyone with the same problem which is odd...
    Any advice I would love it. Otherwise I need to return it.
    The MAc shop said it wasn't their problem. Mac just guarantees works on MAc OS and maybe someday will support bootcamp. Really bad answer.

  • 7850 CrossFireX - Catalyst Control Center - Disable CrossFireX

    Hello, I have MSI 7850 CrossFireX. I was playing Skyrim and notice micro-stutter so I went into Catalyst Control Center and disabled CrossFireX.
    The problem is that Skyrim will not load. It always crashes when I start the game. I re-enabled CrossFireX and it will load fine.
    I was wondering whether this is a known issue. Maybe I have to physically remove the connector to get it to work (I haven't tried that. I just wanted to see how it would do with one card). I don't know if this is a problem with Catalyst Control Center, the driver, Skyrim, Steam or what.
    Any information would be helpful. Thanks.
    Edit for more information:
    i5 2500k, Win 7 64-bit
    cooler master hyper 212 plus
    asrock z68 extreme3 gen3
    crucial m4 64GB, western digital black 1TB
    consair vengeance 8gb (2 x 4gb)
    msi r7850 twin frozr (crossfirex)
    (catalyst verison 12.3)
    consair hx750
    The reason i'm asking this question is basically I want to know if disabling crossfirex in Catalyst is suppose to work? I'm sure someone has done it before.

    What's your PC specifications? Have a read >>Posting Guide<<

  • Envy h8-1409 Desktop-Problem Installing Catalyst Control Center on Wiindows 7 for Radeon HD 7570

    Hi,
    I just purchased an HP Envy h8-1409 desktop.  It came with Windows 8 but I downgraded to Windows 7 due to my unfamiliarity with the new Windows 8.
    Officially, HP only provides Windows 8 drivers for this particular model I bought.  However, I was able to find another HP desktop model (h8-1360t) that has almost the same hardware that has Windows 7 drivers.  I downloaded all the Windows 7 drivers and was able to install properly for everything except for the Graphics Card (Radeon HD 7570).  There was an error message during the start of the installation complaining that the driver was unable to find supported hardware on my machine.  I ended up using "Windows Update" to get the driver for the Radeon HD 7570.
    Having installed the Radeon HD 7570 driver only allows Windows to recognize my graphics card but I was unable to adjust any advanced settings.  So I went to AMD's website to get the latest Catalyst Control Center package.  During the installation, no error was found and everything seemed alright.  However after the installation is complete, I was unable to see Catalyst Control Center anywhere on my computer (e.g. Start menu, right-click menu, etc).  Also, when I checked the "ATI Technologies" folder, it was empty!
    I also tried using AMD's auto detect agent but my graphics card was not even recognized.
    I am running out of ideas on how I can get Catalyst Control Center installed.  Please help!

    Hello,
    Here is an article about downgrading a Windows 8 computer.  I hope it helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Pavilion dv6-6130eo​, Radeon HD 6770M, switchable graphics, update Catalyst Control Center

    Computer: HP Pavilion dv6-6130eo
    I have installed windows 7 64 bit
    Graphics cards: Switchable Intel and Radeon HD 6770M
    So far, I have been using the graphics driver provided by HP including Catalyst Control Center, and it has been working fine.
    I recently bought a new game: Wolfenstein:New order. I fulfill minimum requirements.
    When trying to run the game, I am informed, that my Catalyst Control Center must be 14.4 or newer: Fatal error, and game cannot run.
    How can I update my Catalyst Control Center to 14.4 or newer? Both graphics cards (switchable) should be working.
    Thanks a lot in advance - This issue is really getting on my nerves!

    Hi @Guggermand 
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your notebooks works fine except when you try to play your new Wolfenstein New Order game, at which time it informs you that your Catalyst Control Center is out of date and must be 14.4 or higher.  You stated  installed Windows 7 64 bit.
    Have you done all your Windows updates?
    Have you ran The HP Support Assistant to aid with updating drivers and resolving issues.
    Here is a link to the latest recommended  HP driver AMD High-Definition Graphics Driver sp55092.exe for you system.
    If that does not update your current version of the Catalyst Control Center, you will need to check the AMD website.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to  AMD Graphics Drivers and Software for your convenience.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Catalyst Control Center: Host applicaton has stopped working

    I keep getting the error:
    Catalyst Control Center: Host applicaton has stopped working
    A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.
    The only button on this window is "Close program"
    This error started on 01/04/15 (via the event viewer).
    The video driver for my AMD Radeon HD 7520G from AMD is dated 9/15/2014 with a version of 14.301.1001.0.  If I go to the HP support site, the driver is shows is dated 11/11/2013 with a version of 13.152.1.1000.

    Hi @cjssas 
    Welcome to the HP Support Forums!
    I understand that you are getting an application error from your Catalyst Control center. I am happy to assist with this.
    The first thing I would recommend trying is a system restore to a point before the problem began. It is possible that some other software installed or driver, or system update, may be the cause. So take a look at this:
    Using Microsoft System Restore (Windows 8)
    If that does not work, then I would download the driver again, uninstall the existing driver, restart the computer and then install the driver once more and see if the problem recurs.
    Incidentally the support website shows the latest hp customized version of all the drivers for that notebook. Hp customizes them to be compatible with the other hardware in the notebook. It is always possible to use a different driver, but there are no guarantees it will work.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Windows 8.1-AMD Catalyst Control Center

    Hello!
    First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
    I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
    "Catalyst Control Center cannot be started.
    There are currently no settings that can be configured using Catalyst Control Center"
    This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
    I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs. 
    So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again  so I can change what graphics card is used when.
    Thank you
    -Conor
    P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.

    Possible solution:
    Hi Guys,
    I just contacted HP support regarding this problem. They asked me to install the following file:
    ccc2_install.exe
    It was already present in my system in the following path:
    "C:\Program Files\AMD\CCC2\Install"
    This solved my problem. CCC is working fine now
    Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
    Hope this helps
    Cheers...
    Thanks and regards,
    Saptarishi

Maybe you are looking for

  • CC installed 3 versions of Photoshop. Which one should I use? How do I get bridge to point to this version?

    I use Photoshop CC (64). I have all my action scripts and hot keys set up there and everything works fine. Until I try to use bridge to run a batch in Photoshop. When I try to run a batch operation from bridge in Photoshop using an action I made in v

  • Clustering Problem

              Hi Guys ,           How should scaling of Weblogic applications being accessed by t3 protocol to be           done .           Consider the following scenario :           Weblogic server A hosts an application which in turn uses t3 protocol

  • How do I get an iMac to automatically restart when screen freezes and computer has to be restarted at plug

    Occasionally the screen on the Imac will freeze and the compute has to be restarted at the plug, but when the plug is switched back on the computer only switches back on fully with the screen coming on if you switch a button around the back of the co

  • Event Failure-using DV

    Hi Experts, I am getting stuck at one logic when i using dynamic visibilty in my dashboard. The situation is like this : Sale of Toothpaste : across india(Location Dimension) i have two series Plan and Actual on X-Axis i have three type of it : Clove

  • Doubt regarding writing to spreadsheetfile.vi

    I have created a VI that records the voltage values from 8 channels. I want to record it in the ascii file. So, I am using the write to spreadsheetfile.vi. I need to know how do I connect it in my VI. I am getting the problem of asking for multiple p