Catalyst Control Center.

Catalyst Control Center On My 
HP Pavilion dv7-6c50ei
Crashes On Start Up, Any Solutions To Get It Running Again?.
Thank You, Your Help Would be Much Appreciated.

Hi,
Try using Recovery Manager to reinstall your original AMD Graphics Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Windows 8.1-AMD Catalyst Control Center

    Hello!
    First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
    I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
    "Catalyst Control Center cannot be started.
    There are currently no settings that can be configured using Catalyst Control Center"
    This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
    I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs. 
    So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again  so I can change what graphics card is used when.
    Thank you
    -Conor
    P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.

    Possible solution:
    Hi Guys,
    I just contacted HP support regarding this problem. They asked me to install the following file:
    ccc2_install.exe
    It was already present in my system in the following path:
    "C:\Program Files\AMD\CCC2\Install"
    This solved my problem. CCC is working fine now
    Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
    Hope this helps
    Cheers...
    Thanks and regards,
    Saptarishi

  • Boot Camp - Windows 7 (64-bit) - Catalyst Control Center

    Hi,
    This topic is all about running Catalyst Control Center on your Mac in Boot Camp.
    Setup:
    Mac Pro 2.66 (early 2009)
    ATI Radeon HD 5870
    Boot Camp 3.2
    Windows 7 (64-bit) SP1
    Case:
    First I uninstalled all graphic drivers that came with Mac OS disc. After that I booted up in safe mode and removed all left-overs with Drive Sweeper. After verifying that everything was gone I booted up in standard mode and installed latest version of Catalyst Software Suite (v.11.2).
    Notice! To get through with the installation of CSS I had to uncheck features like drag and drop decoding. If I did not uncheck those features the installation process would fail...no clue why. After a "successful" installation it still does not work. When I right-click the CCC shortcut or try to start the application from its folder nothing happens.
    *Solution (if any):*
    Any ideas?
    <Edited by Host>

    I had trouble accessing catalyst control center (for my AMD Radeon HD 6700M Series display adapter) on my Windows partition (64-bit).  I tired installing the drivers from the mac os x cd and from AMD's web site.  While I could successfully install the driver, I couldn't get the control center up and running.  The interesting solution to this problem was downloading the AMD Catalyst™ 12.2 Preview Driver.  After installation, i was able to access the catalyst control center and solve a problem that I was having (undersize on my monitor when using HDMI).  I hope that this helps solve the problem to others who are experiencing it (I thought I'd post as this page came up in my solution searching).

  • ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

    Hey all,
    I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

    I have posted a message "White screen of death and computer halts with ATI 4870 in Boot Camp"
    I bought the 4870 and ANYTHING I do causes the system to halt and go to a white screen before even attempts to go into windows.
    I have called Mac AND gone to a shop. I took the NVIDIA out of my MAc Pro and put in the 4870 and works GREAT in Mac but as soon as hold down the Option key to get the option to select Mac or Windows it halts system when push Windows before even attempts to load Windows.
    I went so far as to take ALL hard disks out of system but a new one and put a Vists dvd in drive and try to install it.... Also tried Windows 7 and xp. NONE work... as soon as click the dvd the system halts. So this supposed upgrade just doesn't work.
    I haven't found anyone with the same problem which is odd...
    Any advice I would love it. Otherwise I need to return it.
    The MAc shop said it wasn't their problem. Mac just guarantees works on MAc OS and maybe someday will support bootcamp. Really bad answer.

  • T500 ATI Catalyst Control Center cannot be started

    I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?

    Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • ATI Catalyst Control Center

    OK... so ive installed the video driver but when i look at add remove programs it does not show the Catalyst Control center is installed .. nor does it show up when i right click on the desktop. i have .net Framework 3.5 installed. what is the problem and/or where to i download the Control center... my unit is T60 2623 D6U running windows XP pro.
    UPDATE: i will keep this up incase someone has this problem... the reason it wasnt working was because i never executed the Setup.exe file.. you must load the ATI software for it to work.. yes i am a noob sometimes....
    Thanks to all who didn't flame this post.
    Message Edited by Gdenison on 06-04-2008 03:01 PM

    Funny enough i had the exact same problem on an A50 desktop.  When you run the Catalyst "installer" it doesn't actually install, it just extracts the programs into a folder.  you then have to navigate to the files and run the setup
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

  • 7850 CrossFireX - Catalyst Control Center - Disable CrossFireX

    Hello, I have MSI 7850 CrossFireX. I was playing Skyrim and notice micro-stutter so I went into Catalyst Control Center and disabled CrossFireX.
    The problem is that Skyrim will not load. It always crashes when I start the game. I re-enabled CrossFireX and it will load fine.
    I was wondering whether this is a known issue. Maybe I have to physically remove the connector to get it to work (I haven't tried that. I just wanted to see how it would do with one card). I don't know if this is a problem with Catalyst Control Center, the driver, Skyrim, Steam or what.
    Any information would be helpful. Thanks.
    Edit for more information:
    i5 2500k, Win 7 64-bit
    cooler master hyper 212 plus
    asrock z68 extreme3 gen3
    crucial m4 64GB, western digital black 1TB
    consair vengeance 8gb (2 x 4gb)
    msi r7850 twin frozr (crossfirex)
    (catalyst verison 12.3)
    consair hx750
    The reason i'm asking this question is basically I want to know if disabling crossfirex in Catalyst is suppose to work? I'm sure someone has done it before.

    What's your PC specifications? Have a read >>Posting Guide<<

  • Amdcccle (Catalyst Control Center) not saving multiple monitor setting

    I followed the wiki to the letter, but I cannot get any x window session to save the changes I make in amdcccle.  All I am trying to do is get multiple monitors configured, and it works great with the catalyst control center but it never saves these settings.
    I have done the following:
    gksu amdcccle
    gksudo amdcccle
    also:
    sudo aticonfig -f --initial=dual-head --screen-layout=right
    and many other interations of aticonfig.  The -dtop option complains that it doesnt work with RandR enabled.
    I got this working a few weeks ago but can't remember what I did.  If amdcccle could actually save the current configuration to file that would solve the issue but it simply will not.

    Hello insco6750,
    When you updated the drivers did you install over top of existing software or uninstall beforehand?
    First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
    After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
    Once you let windows install see if your HDMI output no longer works when you switch to the TV.
    Post back your results after completing this.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Bootcamp - Catalyst Control Center - help me!

    Hello, I've tried to install catalyst control center for windows 7 bootcamp, I can't seem to find the download for the actual program, I only find the drivers for it, I did find the program once, and installed it, but then I only had 2 different tabs in there, and there should be atleast 7+ with alot of options. I had close to none, in my install of the program, so I uninstalled the whole thing and now I can't seem to find it again.
    I've installed the latest driver for the program now, but I cannot find the program...
    And ofcourse I want to find out why I only had 2 tabs in there, when I should have had 7+
    Please help me
    - Anton

    Is it these old drivers?
    http://forums.macrumors.com/showthread.php?t=1151529
    Might repost over here...
    https://discussions.apple.com/community/windows_software/boot_camp

  • Help catalyst control center

    message comes up: catalyst control center host application has stopped working. Videos sound but no picture?

    Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
    - Peter

  • Catalyst Control Center ATI graphics card error message

    This error message keeps popping up:
    "The Catalyist Control Center is not supported by the driver version of your enabled graphics adapter. Please update your ATI graphics driver or enable your ATI adapter using the Displays Manager."
    I have the latest driver and as far as I can tell, it is the only driver it is possible for me to "enable." Why does this message keep popping up and how do I stop it?
    Thank you.

    Uninstall the catalyst control center.
    Download the most recent display driver from Lenovo - not from ATI.
    Uninstall the existing display driver.
    Install only the display driver - do not install catalyst control center.  It is totally unecessary in this computer, in my opinion.  Both XP and Vista do a simpler job of managing displays.
    Don Mannino

  • Catalyst Control center options no longer available

    My desktop is an HP Envy h8-1534. It is currently connected to an HDTV. 
    I just attempted to load the catalyst control center to tweak my graphic settings and find that none of the normal settings are available. I'm unable to so much as change my resolution, let alone anything more advanced. I'm not exactly sure when this happend as I don't go into those settings all that often. However, if I had to guess, I would put the blame on upgrading to windows 8.1 a couple weeks ago. 
    I'm not sure what to do now but it is kind of infuriating! I have several game I'd like to run that only work in 16 bit color mode and I have no way of changing that now. 

    Hi,
    Install the latest AMD driver update that is listed under Windows 8.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Amd catalyst control center panel

    am trying to use the AMD Catalyst Control Center but if you look at picture u will see that most of the functions of the control center are missing. I have tried reinstalling it ( the one on the HP download page) but it says "the computer does not meet the requirements for installing the software" yet going by the model and serial number of my laptop it is the one HP says to use. Has anyone else had this problem and if so found a fix?

    Just wondering how posts are chosen to be answered as I see some from today are answered and earlier posts are still waiting for a reply.

  • ATI Catalyst Install Manager and catalyst Control Center Help

    I just run the Windows 7 Upgrade
    advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
    Could someone direct me where I might t find these programs for Windows 7

    You must not do this. Just continue upgrade installation.
    On my Satellite I got the same message but I have simply continued with upgrade.
    At the end everything went fine.

  • How to adjust HDMI overscan without catalyst control center? 2011

    I have an unsolvable problem due to the lack of standard between Apple and AMD.
    The problem is that i have a black frame arround my TV screen when i connect my MacBook Pro 2011 (15" 2.2Ghz) to my TV.
    This is called overscan. 
    Now here is why i can't solve this (and why it is so frustrating):
    -AMD cards send underscanned signal through an HDMI output by default.
    -Having no native control for overscanning on Windows 7, the only way to adjust this is through AMD/ATI Catalyst Control Center software.
    -The AMD Catalyst Control Center software is incompatible with the MacBook Pro 2011 and won't install.
    Now is there a workarround for this?
    If not, who is responsible (who should i turn to)?
    Is it Apple for using a non-standard driver for the AMD graphic card?
    Or is it AMD for not providing me with a compatible version of Catalyst Control Center?
    PS: Of course Microsoft is responsible for not providing native overscan control in Windows 7  

    Hi C,
    See if the TV has overscan settings or zoom.
    http://hd.engadget.com/2010/05/27/hd-101-overscan-and-why-all-tvs-do-it/
    In a perfect world broadcasters would mind their signal and ensure every pixel was worth watching, then TV manufacturers wouldn't feel the need for overscan -- or at least we hope. In the meantime we're just happy that most TVs have a way to turn it off. When an image is displayed properly, it's sometimes referred as 1:1 pixel mapping. This simply means that every pixel in the signal is displayed by a single pixel on the display. Of course each manufacture has its own name for this mode; like Samsung who sometimes calls it Screen Fit, and Pioneer called it Dot by Dot. No matter what it's called, it's rarely on by default -- even when watching 1080p24 from Blu-ray which never has garbage on the edges! -- so you'll have to find the button on the remote called something like format or P.size, depending on the brand. Your best bet is to read the manual -- shocker.

Maybe you are looking for

  • Is it possible to add a target amount to a query

    If I have a number being disagregated by Cost Center is it possible to add a target amount on a cost center level? I know we could add an attribute to Cost Center that hold a value for this target, but that could not be used in calculations or be sho

  • How to remove members using Outline Load Utility

    Hi, I'm new to Outline Load Utility. Currently I'm testing all available options of Outline Load Utility,I'm facing one problem while performing one option. Te following options are working fine for me: 1. /M /N 2. /-H 3. /-O But I'm not able to remo

  • Uninstall Leopard and reinstall Tiger?

    I have had too many problems wih Leopard. How can I go back tso Tiger since I don't have the Tiger CD?

  • Using JARs without loading classes

    I have a situation where several JARs have had their classes loaded into a schema but now I have other JARs of which cause version collision issues if implemented inside the same schema. Is there a way to actually call a JAR and execute its classes w

  • How to force Pages 2.0.2 to run under Rosetta?

    I browsed Apple's Support site and found this document: http://docs.info.apple.com/article.html?artnum=303120 I can find the check box for Safari 2.0.4, but I don't have this box for my Pages 2.0.2. I have also confirmed with System Profiler that my