Catalyst control system stop working

recently i upgrade my laptop from windows 8 to 8.1 my laptop is hp pavilion e015tx after updating operating system when i try to open "configure switchable graphics" or " graphics properties" it will not open and give message "catalyst control control system stopped working"
please help me some one

Hey @prakhar12 ,
We meet again!
The CCC software may need to be updated to work on Windows 8.1.
Please try installing the most recent version from the HP website here: AMD High-Definition (HD) Graphics Driver.
This package contains the drivers for both the Intel and AMD GPU so that your switchable graphics will work in Windows 8.1.
Let me know if that helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

Catalyst control center stopped working

HP Pavilion HPE h8-1287c
Video card Radeon HD 7450
Windows 7 64-bit
Error message "Catalyst Control Center stopped working......."
Two monitors connected, HPw2408h and TV. HP monitor is connected using DVI and the TV using HDMI.
The issue is that when the pc starts things run fine. WhenI want to have the sound to the TV I switch the Sound Playback to AMD HDMI Output and the TV now has the sound. After a while I will get an error message "Catalyst Control Center stopped working.......". When Sound Playback is opened the AMD HDMI Output is no longer working and has a red arrow pointing down and it indicates the AMD HDMI Output is "not plugged in".
I have download the latest drivers and still have the same results.
What is needed to correct the issue?

Hello insco6750,
When you updated the drivers did you install over top of existing software or uninstall beforehand?
First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
Once you let windows install see if your HDMI output no longer works when you switch to the TV.
Post back your results after completing this.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Catalyst Control Center stopped working properly after widows update

When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7). Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7). Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Load MMDriver and Catalyst Control has stopped Working

I have an Notebook Pavilion dv7 -6c00
Two days ago I Installed Adobe Premiere, and when I try to run it i get a error message that says somethink like they can't find a video module, I google it, and some people says that I have just to update my Graphics card driver. So I go to AMD page, and download the last catalyst control..
Since then I can't open firefox, Games, and other thinks because Load MMdriver crash and when I try to open Catalyst control it's the same.
I try:
- To install de original drivers with the Recovery manager. (nothing happen)
- Uninstall the catalyst control... was the same...
- To Restore the system with Windows Restore point... and then I get a error and it delete my point of restore, and don't solve the problem eather...
¿So what I have to do? I read this topic: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Update-to-windows-8-1-Load-MMdriver-not-resp...
They recommend to install that drivers in that order, I already download the driver for my specific model... but I'm worry about that "update" will crash another things.... Which is the solution to this problem?
This is a picture from google that shows my notebook model, (just to comfirm my model Pavilion Dv7-6c00).
http://blog-imgs-50.fc2.com/d/i/g/digimonolog/Windows-Live-Writer_HP-Pavilion-dv7_C0F1_IMG_0021.jpg

Well First, Thank you a lot for answering.
My OS is Windows 7 (64 bits). Sorry I forgot to put it in the message.
I did not explaing mysell correctly. I did not the Recovery System from the partition yet, I just did the System Restore from a Restore's point. (EDICTION: more exactly, The AMD Driver from AMD web pages, also install the Microsoft Visuall C++ 2000, and maybe it was my biggest mistake, to choose it like the point to restore, and not before it... from that point it start the problems, when The restore finished it's said something like: "There was a error, and the restore couldn't complet... but it's indeed restore, but it erased the rest of restore points. I also have to add that It wasn't the first time that I restore, I mean, I install one driver from AMD and like I doesn't let me to run Adobe premiere, I restore to another point, and try another Actualization of Catalyst control manager, and it's in that moment, when it eather solve the problem, when I restore to the point when Visual c++ 2000 was installed, an all my nightmare begins)..
When I mention the Recovery I was talking about HP Recovery Manager, it let me reinstall the original drivers without the reformat/recovery the laptop. I used it to reinstal the original AMD Driver... but it doesn't solve the problem.
I did not the recovery because I would prefer not to have to reinstall all my programs. (But it's the ultimate solution XD).
I figure out that maybe the problem is in the Intel's Graphics Driver, (I didn't mention it, but my laptop has switchable Graphics, I think that's how it's called XD). I think that's the problem because when I used the HP Recovery Manager to reinstall my Intel's Graphics Driver I get this Error:
http://s10.postimg.org/rua6ahk7d/Untitled.jpg
Also I can open the programs that I mention just when I go to Divice Manager and Disable or Unistall that Intell Graphics Drive (but it reinstall automatic when I: "Right click > scan for driver changes"). I can't find it in the "Add or Remove Programs" so I can't unistall the driver to prove with the HP Recovery Manager.
http://s29.postimg.org/g0r05dhzr/Untitled.jpg (Device Manager picture that shows my graphics Drivers, selected the one that I think it's the problem).
Then I don't know what to do. I really don't want to Recovery the pc, with the Recovery partition. I would prefer to try another options before (if exist any).
Thanks for Aswering, and excuse me my english, I'm not native... like I think you already guess. XD If I didn't explain somethin well I will try no explaing it better .
PD: When i have the intel driver Active, I get the message: " --Programs-- has stopped working" The --programs-- can be: Catalyst control, Skyrim (game), the HP Recovery Manager It's self, Firefox, and any thing that could use the graphics card (I don't get it why it happened with the HP Recovery Manager app that I shows in the picture... but it happened, i have to Disable the driver to get printscreen....
http://s9.postimg.org/logt6h62z/Untitled.jpg
PD2: Sorry I didn't mention all this in the first post, I was a little hurry when I writed it.

Brightness control keys stop working after booting MacOSX

I bought a new iMac 27" a couple of weeks ago, and I installed Windows 7 using bootcamp.
All the control keys (brightness, volume, etc) works ok on Windows until I reboot it in MacOSX. When i start windows again, brightness controls keys stops working, leaving the screen with the maximus bright, which is killing my eyes.
Reparing boot camp drivers doesn't do the trick. Am I missing something?

Try fn + the controls. It might be that Windows defaulted to those buttons as F1, F2, etc. Using fn while pressing the buttons will 'tell' Windows that it has to listen to the Bootcamp software and lower the brightness.

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why did the Notification Center and Control Center stop working?

After updating ios 8, Notification and Control Centers stop working from time to time. I can't swipe up or down. I have to use the Assistive Touch to bring them on screen. Restarting the iPhone make them usable again. But afyet a while, it happened again.
Now, iOS 8.1.2. Last update, the Centers used to appear again. But 8.1.2, they just stopped working.
How how can I fix it?

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

Remote control suddenly stopped working

the remote control that came with my nokia 5700 XM just stopped working. in fact i haven't used it that much (something like a ten or 20 times for the 6 months i own it). the most interesting part is that i get sound with the earphones which are connected with the remote. i can't control the player but can still listen. the handsfree usage is also gone. i can hear the voice but can't speak to the mic of the remote. when i connect the remote to the phone i recognises it like the default headset. i did a factury reset of the system but it did't help. is it dead? i am waiting for suggestions. thanks.

Some nokia made remotes have a small battery inside (the one that's supplied with the N95 does) and it may have run out.
If you don't want to open the remote to check then you should take it to a nokia care point/service centre.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Swipe down/up for notification and controle center stop working

Hi guys,
I got today my new IPhone 6+ running iOS 8.0.2 and after a while the swipe up gesture for the control center and also the swipe down gesture for the notification center stops working on the home screen and in apps.
On the lockscreen the gestures still working.
It happend now 3 Times today but I can´t see any System behind this.
And it happens also that the System freezes some times for a few seconds, I saw it happen In safari and mail app.
Hope these are only bugs in iOS which will be solved soon.

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

FM 8p273 control commands stop working

Hello,
Recently upgraded to 8p273 due to known bug with indexing; this solved that problem.
However--I find that from time to time (increasingly frequently, it seems) control commands (cntl-c, cntl-v, cntl-m, etc.) stop working, in an erratic fashion. I.e. one will stop working properly (seemingly cntl-c to copy things), but cntl-v still works, then after a while cntl-v will paste, but in the main frame not in the marker dialogue box, etc. (difficult to describe all this accurately).
Eventually, I close FM and restart it, and I'm good for a few minutes.
I've tried downloading p277 (in case it fixes this) but only 7Mb of 32 download, and when I try to run it, as far as I can see, nothing happens. So not getting anywhere there.
I'm running this on Win XP SP3 under Parallels 8.0.18494, but I don't know that that's the problem; cntl-c and cntl-v still work in other applications.
Any ideas?
I'm near the end of a project (well, if I can get the work done!) so it doesn't make sense to upgrade to a new version just now....
Thanks for any help!
K

Thanks very much for these suggestions. I doubt either malware or Parallels are to blame, though, because....
a. It's an institutional computer, with daily updated virus files, and I don't download anything EVER through Windows (except software updates). No guarantee, of course, but I doubt that this would be the cause.
b. When the problem surfaces (which is some time after entering FM), it is *local* to FM. I've never had the problem in MS Access, the only other product I use frequently on Windows, and when it happens, I've loaded Word and other things, and the problem is not duplicated there.
c. The problem is discussed on Parallels forums (for an older version, however), but in those cases, it is global to all apps....
KF

Qosmio F50-111: Control buttons stopped working using VMWARE Workstation

Hi,
Since Ive installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media center, next, previous, mute, and light, webcam, and dolby) stopped working.
So Ive chosen to restore my Vista before the installation on my VMWARE. It works my buttons work again...
BUT I need to install this software (vmware) for my job use.
I've already tried to remove and install then new Value Added Package from Toshiba Website, but it doesn't work.
Please help me
It mean that the applications (in the TBS folder, like TDspBtn.exe, TBSbtnSt.exe,...) start running but stop immediately.
Thank's for your comming help

I tried to disable VMware services but it didn't solve the problem but I found something interesting.
I opened the windows Event Viewer and in Windows logs > System I saw that for each boot of the PC there is a log about TBS, Toshiba Button Support which says:
"Aucun périphérique de sécurité du module de plateforme sécurisée compatible trouvé sur cet ordinateur. Impossible de démarrer les services de base de module de plateforme sécurisée."
I don't know the english message but it's something like no compatible device of security of safety platform found on this computer. Unable to start The base services of the module of safety platform.
I hope this with help us and Toshiba to find where does this incompatibility comes from.
* System
- Provider
[ Name|http://forums.computers.toshiba-europe.com/forums/] Microsoft-Windows-TBS
[ Guid|http://forums.computers.toshiba-europe.com/forums/] {51480c1a-90aa-416e-98fd-4c11f735349b}
EventID 537
Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime|http://forums.computers.toshiba-europe.com/forums/] 2009-01-04T03:54:49.807Z
EventRecordID 32303
Correlation
- Execution
[ ProcessID|http://forums.computers.toshiba-europe.com/forums/] 1100
[ ThreadID|http://forums.computers.toshiba-europe.com/forums/] 4324
Channel System
Computer JCLB-X300-126
- Security
[ UserID|http://forums.computers.toshiba-europe.com/forums/] S-1-5-19
EventData
now in XML
* <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
* <System>
<Provider Name="Microsoft-Windows-TBS" Guid="{51480c1a-90aa-416e-98fd-4c11f735349b}" />
<EventID>537</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2009-01-04T03:54:49.807Z" />
<EventRecordID>32303</EventRecordID>
<Correlation />
<Execution ProcessID="1100" ThreadID="4324" />
<Channel>System</Channel>
<Computer>JCLB-X300-126</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData />
</Event>

Control keys stop working after the last tigervnc upgrade

I've upgrade to the last tigervnc package (tigervnc-1.3.0-1-x86_64.pkg.tar.xz) and control keys like CTRL+C, CTRL+V stop working.
Is someone facing the same problem?

Yes, I have the same problem. It seems to be the viewer as I can connect to the server with
a different vncviewer (tightvnc) and all keyboard control keys work. I ran xev and pressing
CTRL-T and it shows:
KeyPress event, serial 34, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693323, (-452,-13), root:(362,803),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693402, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XmbLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693530, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272694875, (-452,-13), root:(362,803),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
The
(keysym 0x1000014, (no name))
shows up on a normal xserver as
(keysym 0x74, t)
I'm not sure how to fix it though.

The silent/ringer switch and the volume control buttons stopped working, how can I fix this or do I just need to get a new phone?

One day I relalized that the silent/ringer switch on my iPhone 4 stopped working. My phone is permently silent and I can't turn the ringer on. The speakers still work so they aren't the problem. Also, the volume controls on the side don't work either. Is this problem fixable or do I need to get a new phone?

you can try the restore first to make sure it is nothing software related. makesure to back up information and restore as new. after that it is hardware if your with in the limited hardware warranty and can be replaced for free if you are not then it can be replaced for 149$ if it is a iphone 4 or lower

Control key stopped working in my tigervnc sessions [SOLVED]

Recently, the ctrl key (for example ctrl+F) stopped working when I connect to a vncserver running tigervnc... anyone else? Must be something recent package-wise because it has always worked in the past.
On the server, I run simply:
% cat ~/.vnc/xstartup
#!/bin/sh
exec startlxde
To start the server:
% vncserver -geometry 1792x1008 -alwaysshared
Last edited by graysky (2014-11-15 11:41:30)

The culprit is fltk-1.3.3-1... downgrading to 1.3.2-5 and restarting the vncserver fixes the problem.
https://bugs.archlinux.org/task/42796

My search function (when I start typing or control f) stopped working.

I checked and my "Search for text when I start typing" is still checked, but neither that nor control-f are working. When I search for text, the blank box appears at the bottom left of the page but the letters do not type into it. With control-f, the box appears, the letters get typed in, but it does not function, it does no search.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Catalyst control system stop working

Similar Messages

Maybe you are looking for