Catalyst host stopped working

hi i need urgent help. i am using window 8.1 and i got message "catalyst host stopped working" i checked and applyed the procedure about c drive and user floder , click properties and click hidden.....
when once i click ok it starts and then showed a message that one flie is showing error so i ignore that and continue. once it finished. i lost all documents, photo everything....
i understand that it was advised that user floder will be stil in right hand tree but it is not even there. i could not find that user floder any where and now so many thing lost as i do not have internet explorer there.
please tell me how to retrive my files
i am desprate as these were my office work which i lost and all of my daughter's pictures...

Hi Khani,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Hp Notebook and having issues with the graphics controller. Here is a link to the HP Support Assistant, The HP Support Assistant will do the updates for you. I would be happy to assist if needed as there are many models of HP Notebook, I would need the model number. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Upload to ftp host stopped working since last Muse update

Since the last update of Muse (CC 2014.3) I'm unable to configure the ftp access in 'upload to ftp host'. It gives me an error notification (as if the user or password are incorrect) and therefore doesn't connect. The server client to which I'm trying to connect immediately blocks my ip address (they say it's because their firewall detects that my ip address is trying to connect to their server using a TCP forbidden door (990). Can someone please help me with this? I've already tried configuring the same ftp connection in dreamweaver, using exactly the same host, user and password and it works fine. Can someone please help me understand what's happening?

Hi Zak,
I'm from Portugal, the hosting provider is Hocnet (www.hocnet.pt). Do you need to know my ftp connection user and password for testing?
I contacted Hocnet earlier today because when I attempted to do the configuration of the 'connect to ftp host' in Muse, suddenly all that is dependent of their server (the access to my website www.luiscovas.com, the e-mails associated with my luiscovas.com account and the ftp accesses) became unavailable, and my browser displayed the message I attach in this message (it says 'Conection blocked for security reasons'). After an hour, my ip was finally unblocked, but until then I couldn't receive or send emails, and I couldn't access my site and the hosting provider through ftp. They told me that their firewall detected that my ip was trying to connect to their server using a TCP forbidden door (990), and so it automatically blocked it.
Please let me know if you need more information to run the tests.
Thanks for your help,
Luís Covas

Print Filter Pipeline Host stopped working and was closed

I recently bought an HP Envy 5532 printer, which works OK when I print from my PC (Word documents for example), but deletes document and shows the above error message when I try to print from the Internet. I have tried the HP Print & Scan Doctor to fix problem and when I run a test page all is OK, but as soon as I try to print from the web the same problems happens again.
I have downloaded new drivers and software but nothing works.
I tried to use an earlier post to fix things (had the same description as my problems and related to an HP printer) but when I went to select New Driver in the Printer Advance settings in Properties, it was greyed out.
Anyone out there who can help me?

Hello Luisea, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, have you tried printing from multiple browsers, such as Internet Explorer, Mozilla Firefox or Google Chrome?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Dng convertere stopped working

When i first downloaded dng converter it worked fine.After about a month it stopped working.Instead of the raw file showing up as abox in which 'dng' was written,psd box showd up instead and when clicking on this it opens up the raw file editor but then when try ing to save the image i psd there is no jpeg in the dropdown box to save it as. There is only psd ,jiff and some others. There was a jpeg choice when i first downloaded and the dng box. So what happened.?? I have tried several times downloading again but still same problem. Checking somewhere on the comp it said 'control host stopped working. Dont uninstall in case it starts to work again. this was a few months ago that it stopped working.Also it seems there is not 1raw and 1 jpeg file...sometimes ther are 3 or 4 raw files as psd and only one jpeg. Hope that clear.Thanks.

I received a link from a photo forum..(could not copy and paste it) Adobe Creative Cloud.PSCC/ In depth, Digital Negative DNG.
He said he downloaded this and could convert raw images saving as jpeg or jiff etc. I did this in August last year and it worked exactly as he said. I dont remember where the files where the files i downloaded fom my camera were ending up. Must have been PICTURES IN LIBRARIES WHICH COMES WITH WINDOWS 7. This I have had about 1 yr. When i downloaded the adobe dng the raw files then appeared as a box with dng printed on it. This with jpeg image which can be seen next to the box dng. Clicking on the dng box then came up in pse with the RAW file editor. I edited the image and clicked on save image at the bottom . This then came up in pse screen and i clicked on FILE ----SAVE AS---Then there was a drop down box with lists of types to choose from jpeg was available. clicking on this I could then see the edited image. Now this doesnt exist. But there is no longer the box with 'DNG' printed on it. This probably still leaves you just as much in the dark as I am. I dont really understand anyway how this works,but it worked the first downloading. In anycase Windows photo gallery was not working ,no images were coming up in that place. Question is ...what should happen when you download dng converter. The RAW file ......what should it look like.??
My photos are now going into windows library . There is no DNG converter to choose from. There is a list,including pse. windows view finder ,Adobe Reader and several others,If you can give me an idea what I should see if dng has been downloaded 'properly'. But it was installed thru Wizard and i completed this to finish so ... cant see how it has not been downloaded correctly. Anyway it did work in August and came up in pse. ...so it does seem to work in adobe pse. It is afterall meant to work in Adobe photoshop inst it? It is an Adobe product ....the dng i mean. As you said there seems to be something else that's involved as to why not functioning.

Satellite P200D - Catalyst Control Centre host application stopped working

Hi. I have a Satellite P200D-128 and I've been getting a pop-up screen with an error message saying, "Catalyst Control Centre host application stopped working." I'm sure I haven't altered anything.
I tried downloading new drivers from http://support.amd.com/us/gpudownload/Pages/index.aspx but the download wouldn't work.
Please could you help?
Thanks.

Hi
The right driver you can find here . Download it, open Display Driver ATI folder and execute setup.exe. and follow the setup menu.

Catalyst Control Center: Host applicaton has stopped working

I keep getting the error:
Catalyst Control Center: Host applicaton has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
The only button on this window is "Close program"
This error started on 01/04/15 (via the event viewer).
The video driver for my AMD Radeon HD 7520G from AMD is dated 9/15/2014 with a version of 14.301.1001.0. If I go to the HP support site, the driver is shows is dated 11/11/2013 with a version of 13.152.1.1000.

Hi @cjssas
Welcome to the HP Support Forums!
I understand that you are getting an application error from your Catalyst Control center. I am happy to assist with this.
The first thing I would recommend trying is a system restore to a point before the problem began. It is possible that some other software installed or driver, or system update, may be the cause. So take a look at this:
Using Microsoft System Restore (Windows 8)
If that does not work, then I would download the driver again, uninstall the existing driver, restart the computer and then install the driver once more and see if the problem recurs.
Incidentally the support website shows the latest hp customized version of all the drivers for that notebook. Hp customizes them to be compatible with the other hardware in the notebook. It is always possible to use a different driver, but there are no guarantees it will work.
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Satellite L500D-144 - CCC Host Application has stopped working

Ladies and Gentlemen,
my PSLT6E-007004GR is almost a year old.
Earlier this month there was an update - possibly from Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
Catalyst Control Center. Host Application has stopped working, it is searched for a solution.
A new installation of the graphics card driver and Catalyst Control Center did not change. Instead, a standard graphics card driver from Microsoft is installed.
Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
So it is reproducible.
Have already reported more customers or am I the first?
What can you do to the problem?
Sincerely,
CBluebaerchen

Hello
> Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
Do you get this display driver update from Windows Update?
If yes restore the system to an earlier point and disable this display driver update and choose only the important updates from Windows. Thats enough.
Otherwise you could try to run CCleaner. It can clean and fix registry problems.

HOST APP SERVICE has stopped working

I keep getting the message "HOST APP SERVER has stopped working" whenever I try to select the home button on my screen. It simply says that Windows will close the application and notify me when a solution has been found, but this has been going
on for a week and it has yet to message me a solution. The error message isn't very specific as to what is going on and I have no idea what to do!

Hi kgabriella,
Please open Event Viewer and check the related logs, if possible, post the information here.
Further, follow the advice posted by Arnav Sharma, follow the guide to boot into clean boot and check the issue again.
Besides, see if the thread below would help:
Catalyst control centre host has stopped working.
Best regards
Michael Shao
TechNet Community Support

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Host process rundll32 has stopped working while Installing BPC 7.5

Hi guys,
while installing BPC on Windows 2008 R2, the installation programs shows the message
Host process rundll32 has stopped working.
According to SAP Note 1498480 - Windows host process (Rundll32) has stopped working, i have followed the recommendations:
32bit Compatibility Mode ON
C:\inetpub\AdminScripts>cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAp
pOnWin64 "true"
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Enable32BitAppOnWin64 : (BOOLEAN) True
Also disabled the Data Execution Prevention (DEP) and rebooted server.
Then tried reinstalling IIS 7.0, rebooting the server, instaling it again but still showing the same error message.
Any futher help on this would be highly appreciated.
Regards!

After a few restarts it worked

Nokia service layer host process has stopped worki...

Hello,
When i try to update my Nokia E90... i get the following error -
Nokia service layer host process has stopped working
I tried everything... Reinstalling pc suite and Software Updater, but still same problem
Please help me
Thanks

i had exactly the same problem while updating using the latest NSU on Windows Vista with SP1.
I guess there is some compatibility problems between the latest version of NSU and Vista.
I tried with Windows XP SP2 and the latest version of NSU, i was able to update my E90 to the firmware version - 200.34.73
In case, you are using XP, I would suggest you uninstall NSU as per the FAQ in Nokia web site and reinstall the latest version.
Please let me know if this helps.

Catalyst Control Center stopped working properly after widows update

When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7). Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7). Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Print driver host for 32 bit applications has stopped working

I just bought a Hp ENVY 7640 printer. I cannot use the wireless printing on my 64 bit computer, with Windows 7. I get an error message "print driver host for 32 bit applications has stopped working". I have looked into all of your online support solutions and nothing I have tried has fixed the problem.

Was there any resolution to this issue? We have a user with the same issue. The details of the error are:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             splwow64.exe
Application Version:                           6.1.7601.17777
Application Timestamp:                     4f35fbfe
Fault Module Name:                          mxdwdrv.dll
Fault Module Version:                        0.3.7601.17514
Fault Module Timestamp:                  4ce7c883
Exception Code:                                  c0000005
Exception Offset:                                000000000004e891
OS Version:                                          6.1.7601.2.1.0.18.10
Locale ID:                                             1033
Additional Information 1:                  0f86
Additional Information 2:                  0f86ddcc0aa605af31ef1b7f5abedf57
Additional Information 3:                  539e
Additional Information 4:                  539e0f43d86d39f144fdb012e341ed8d

Load MMDriver and Catalyst Control has stopped Working

I have an Notebook Pavilion dv7 -6c00
Two days ago I Installed Adobe Premiere, and when I try to run it i get a error message that says somethink like they can't find a video module, I google it, and some people says that I have just to update my Graphics card driver. So I go to AMD page, and download the last catalyst control..
Since then I can't open firefox, Games, and other thinks because Load MMdriver crash and when I try to open Catalyst control it's the same.
I try:
- To install de original drivers with the Recovery manager. (nothing happen)
- Uninstall the catalyst control... was the same...
- To Restore the system with Windows Restore point... and then I get a error and it delete my point of restore, and don't solve the problem eather...
¿So what I have to do? I read this topic: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Update-to-windows-8-1-Load-MMdriver-not-resp...
They recommend to install that drivers in that order, I already download the driver for my specific model... but I'm worry about that "update" will crash another things.... Which is the solution to this problem?
This is a picture from google that shows my notebook model, (just to comfirm my model Pavilion Dv7-6c00).
http://blog-imgs-50.fc2.com/d/i/g/digimonolog/Windows-Live-Writer_HP-Pavilion-dv7_C0F1_IMG_0021.jpg

Well First, Thank you a lot for answering.
My OS is Windows 7 (64 bits). Sorry I forgot to put it in the message.
I did not explaing mysell correctly. I did not the Recovery System from the partition yet, I just did the System Restore from a Restore's point. (EDICTION: more exactly, The AMD Driver from AMD web pages, also install the Microsoft Visuall C++ 2000, and maybe it was my biggest mistake, to choose it like the point to restore, and not before it... from that point it start the problems, when The restore finished it's said something like: "There was a error, and the restore couldn't complet... but it's indeed restore, but it erased the rest of restore points. I also have to add that It wasn't the first time that I restore, I mean, I install one driver from AMD and like I doesn't let me to run Adobe premiere, I restore to another point, and try another Actualization of Catalyst control manager, and it's in that moment, when it eather solve the problem, when I restore to the point when Visual c++ 2000 was installed, an all my nightmare begins)..
When I mention the Recovery I was talking about HP Recovery Manager, it let me reinstall the original drivers without the reformat/recovery the laptop. I used it to reinstal the original AMD Driver... but it doesn't solve the problem.
I did not the recovery because I would prefer not to have to reinstall all my programs. (But it's the ultimate solution XD).
I figure out that maybe the problem is in the Intel's Graphics Driver, (I didn't mention it, but my laptop has switchable Graphics, I think that's how it's called XD). I think that's the problem because when I used the HP Recovery Manager to reinstall my Intel's Graphics Driver I get this Error:
http://s10.postimg.org/rua6ahk7d/Untitled.jpg
Also I can open the programs that I mention just when I go to Divice Manager and Disable or Unistall that Intell Graphics Drive (but it reinstall automatic when I: "Right click > scan for driver changes"). I can't find it in the "Add or Remove Programs" so I can't unistall the driver to prove with the HP Recovery Manager.
http://s29.postimg.org/g0r05dhzr/Untitled.jpg (Device Manager picture that shows my graphics Drivers, selected the one that I think it's the problem).
Then I don't know what to do. I really don't want to Recovery the pc, with the Recovery partition. I would prefer to try another options before (if exist any).
Thanks for Aswering, and excuse me my english, I'm not native... like I think you already guess. XD If I didn't explain somethin well I will try no explaing it better .
PD: When i have the intel driver Active, I get the message: " --Programs-- has stopped working" The --programs-- can be: Catalyst control, Skyrim (game), the HP Recovery Manager It's self, Firefox, and any thing that could use the graphics card (I don't get it why it happened with the HP Recovery Manager app that I shows in the picture... but it happened, i have to Disable the driver to get printscreen....
http://s9.postimg.org/logt6h62z/Untitled.jpg
PD2: Sorry I didn't mention all this in the first post, I was a little hurry when I writed it.

Catalyst control system stop working

recently i upgrade my laptop from windows 8 to 8.1 my laptop is hp pavilion e015tx after updating operating system when i try to open "configure switchable graphics" or " graphics properties" it will not open and give message "catalyst control control system stopped working"
please help me some one

Hey @prakhar12 ,
We meet again!
The CCC software may need to be updated to work on Windows 8.1.
Please try installing the most recent version from the HP website here: AMD High-Definition (HD) Graphics Driver.
This package contains the drivers for both the Intel and AMD GPU so that your switchable graphics will work in Windows 8.1.
Let me know if that helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Catalyst host stopped working

Similar Messages

Maybe you are looking for