Catalyst install manager has stopped working

Hi,after getting Blue Screen my VGA driver for AMD has deleted by itself.And now i can't install it back because of error that comes out when i try to install it.Doesn't matter which driver,from HP web-page or officiall AMD page.I tried to uninstall the rest of AMD and install it again but it just errors errors and errors.I m including some screenshots that can be useful.The first one is the error,in english it s "Catalyst install manager has stopped working".The second one is Device menager,it says that Intel driver is installed but AMD isnt,and system works with Microsoft standart driver.The third one is the bluescreen detail information.Windows reinstallation didn't help :/ Could it be hardware issue?Thanks in advance.

Hey , Here is a document that shows you how to launch the Recover manager that might help. Turn on the power and press F11 to run recovery without starting Windows. It gives you the option to reinstall software or to recover the Notebook to factory settings. I think it is software related not hardware. Please note remove any and all USB devices. Disconnect all non-essential devices HDMI Cables, as these could cause some issues.Please let me know how this goes. Thanks.

Similar Messages

Adobe Updater Install Manager has stopped working: - Acrobat 9 Pro

OS Win 8.1 recently installed Acrobat 9 on a new computer, tried repeatedly without success, 'Repair Acrobat Installation' makes no difference

Not sure what's going on but i'm also having some weird issues installing/updating.
http://visdiaz.com/acrobat-error1415.jpg

Adobe CEP Service Manager has stopped working

I had repeated problems installing Creative Cloud for the desktop, after it asked me to upgrade.
After renaming OOBE and using the cleaning tool several times, i got Creative Cloud to finally install.
But when I tried to run it, I get "Adobe CEP Service Manager has stopped working".
So I'm still dead in the water. This is just the latest of a string of problems I've had in installing
Creative Cloud for the desktop on my several PCs.
Any suggestions?

Hi Ken,
Does right click run and Administrator when launching the Creative Cloud for desktop make any difference?
-Dave

CS6 Service Manager has stopped working?

Installed trial version and it seems to download but then when I try to use the program a pop up box that says Adobe CS6 Service Manager has stopped working keeps popping up. How to fix?

Which Adobe software in specific is giving you this error message? Which operating system are you using? Did you receive any error messages during the installation process?

SOLVED: BlackBerry Desktop Manager Has Stopped Working

Good morning.
Let me start off by saying I have a Dell laptop runing Vista 64 bit with 4 gig ram. I have Desktop Manager v 4.7 installed and has been working great synching my Outlook calender and my Blackberry.
Starting about a week ago, the synch process gets all the way to the end and I get a message saying:
"BlackBerry Desktop Manager Has Stopped Working" and I have the choice to "check online for a solution and close the program" or "close the program". When I click on "view problem details I get this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: DesktopMgr.exe
Application Version: 4.7.0.37
Application Timestamp: 49c1b7ab
Fault Module Name: StackHash_6d57
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a783
Exception Code: c0000374
Exception Offset: 000aada3
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 6d57
Additional Information 2: a8064b034a1a2f2f618d075073f8fe42
Additional Information 3: 2dc5
Additional Information 4: dbcf31406c7084dbad1f33e2de526f4e
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Any ideas?
Message Edited by The_Geek on 09-29-2009 06:51 AM
Message Edited by The_Geek on 09-29-2009 07:38 AM
Solved!
Go to Solution.

I found this on another site:
1.) Start the Desktop Manager software
2.) Connect the blackberry using USB Connector
3.) Select "back-up and restore"
4.) Select "advanced"
5.) Look at the list of information showing in the "device memory" window on your computer
6.) Select "calender all" and DELETE it
7.) Go back to the main screen and syncronize.
8.) Everything should work fine!
In essence it was a corrupt calendar data file on the Blackberry device, apparently.

Microsoft bootstrap manager has stopped working in my Lenovo G560!!!

I recently downgraded my Lenovo G560 to Windows 7 Ultimate from Windows 8 Pro (Werfault.exe error continued to reoccur even after clean installs). However, after reinstalling my drivers and programs, I cannot install any Office programs. I have tried installing Office 2013 and it encounters an error; Microsoft bootstrap manager has stopped working to be particular. I re-tried with Office 2010 and the installation fails to complete citing an error. These two office packages have previously worked in my G560. Used Office 2010 for a while before installing Office 2013 which I have used for two months. Does the recent install of Windows 7 Ultimate 64 bit have anything to do with it? How can I fix it? Any help will be appreciated.

I'll try that in a few days. I'm currently on the road. Didn't carry my external HDDs with me. Will try it then let you know.

W520 "Power Manager has stopped working" then "finterprint software error"

For the last 6 months, I have not done any lenovo updates,and stuck with old working versions of bios, powermanager, nvidia drivers etc (having lived though the nightmanre of the fist 6 months with CPUs stuck at min on mains and max on batteries etc)
Then I re-installed from scratch and updated all lenovo drivers to the latest, which includes power manager 6.32
Now I get random "Power manager has stopped working" errors pop up for no apparent reason.
They are always accompanied by a finger print reader error:

hi eos,
Thanks for posting. Based from your post you'll probably need to reinstall the power manager and Fingerprint reader. I was checking the support site and it appread that there is also a patch for the powever manager that needs to be loaded.
At this point what I suggest is for you to uninstall the current Power manager you have install fro the link below.
Lenovo Power Management Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - Notebook
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
Power Manager for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) - Notebook
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
ThinkPad Power Manager Patch module for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018811
Please ensure to install all 3 links and check for the changes. In regards to the FingerPrint reader, I'm assuming that you have BIOEXCESS installed aswell. For the time being it is advisable to uninstall that too and check for changes. Once installed the power management. only the install a fresh copy of the BIOEXCESS and check for the changes then.
Do let me know of the update.
Regards.

Dynamic link manager has stopped working

I downloaded and installed photshop CS6, supposedly succesfully, but when I try to run the application I get repeated msgs that dynamic link manager has stopped working. There was also a msg that the application has failed to start because MSVCP100.dll was not found. Both photoshop and bridge appear to work to the extent that I can browse and open files. However I am repeatedly interrupted with msg telling me the dynamic link manager has stopped working. Suggestions?

http://forums.adobe.com/message/4471627

Recovery Manager has stopped working

Hi,
when trying to run the HP Recovery Manager on a HP Pavilion DV6-3180ea notebook, the error "Recover Manager has stopped working" occurs.
Any ideas? Should I try reinstalling Recovery Manager?

Restart the PC and start continuously tapping F11 when you see the HP logo, this will start Recovery manager from the bios, see if it works using this method.

Blackberry Link Peer Manager Has Stopped Working

Hello,
Sorry if this message has already been posted before, but I have downloaded the latest version of Blackberry Link (previous version worked fine) but just as the download is completed I receive a message telling me that Blackberry Link Peer Manager has stopped working and the programme basically cannot be used.
I use Windows Vista and have no such problems before.
Could you please let me know if this has happened before and what solutions there might be.
Thanks Glen.

Hi Waterbuoy - I am still having the same problem and have done everything you have done as well. I have removed the programme, run CCleaner but the same problem every time. Just as the download is about to finish the peer manager stops working and the programme download closes. Makes it very difficult to back up (impossible) the phone and sync with MS Outlook.
BlackBerry please fix this as I know we are not the only ones with this problem.

Installation Error: "Adobe Application Manager has stopped working"

Alright, so I did about 4/5 hours of googling and searching and trial&error, and FINALLY got passed the issue of a "pending machine restart" at the beginning of the Adobe Installer's work. (All explained http://forums.adobe.com/thread/872455?tstart=0.)
The issue with the Application Manager is what is stopping me now.
Once it gets to about 3/4 through the installation, a 'Microsoft Windows' window pops up stating "Adobe Application Manager has stopped working". It searches for a solution, finds not, and gives me no choice but to "Close Program".
Don't know how to fix this... please help. I've been searching for nearly 3 hours now trying anything I can find or think of doing. If you have had a similar situation or even a suggestion, please let me in on it! Thank you all very much!
-Rebecca

I'm not even sure what it was downloaded to. Should I delete the application
manager and the download it again with ie to see if it works then? And if
not, try it again only with Firefox?
Edit: I tried this and had no luck. Need some serious help...

Desktop Manager Has Stopped Working @ Processing Device Calendar During Sync Process

I have a BB 8330 and have an annoying issue....it sync'd with MS Outlook for about 2 months after i got it then I started getting an error inthe sync process "Blackberry Desktop Manager Has Stopped Working, Windows is shutting it Down"....this always happens at the exact same point inthe sync process..."Processing Device Calendar".
I've done everything, Verizon tech support...BB tech support...uninstall/reinstall...nothing has fixed it. I even deleted everything out of outlook and started over. The odd thing is that everything EXCEPT the calendar will sync....it's just when it gets to the "processing device calendar" is stops syncing and I get the 'DM Has stopped working' error and it closes.
I am going to scream if I can't get this fixed...it's been going on since last October!!
Any fixes out there?

Hmm. That may be something in your calendar database is corrupt. Was your device ever synched before? There is a way of clearing the calendar database. So if you have your device synching with Outlook, after it's cleared from the BlackBerry, you could try synching again.
To clear the calendar database you can go into Desktop Manager | Backup and Restore | Advanced. On the right hand side select the calendar database and hit the Clear button. Afterwards try synching again
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Error on startup "dynamiclink manager has stopped working" CS6

So I bought the CS6 master collection, but keep on getting an error on startup of my programs. When I open After effects, Photoshop, Premier Pro, Audition, etc... I get the error "Dynamiclinkmanager has stopped working". The message appears on start up of the program, and the only way to get in is to keep on pressing "close the program" for few min until it loads. It is very annoying and takes forever to open a program. I've already tried uninstalling and re-installing, and that hasn't worked. Here are a few screenshots of the error:
And here is what it says when you select "view problem details" :
"Problem signature:
Problem Event Name: APPCRASH
Application Name: dynamiclinkmanager.exe
Application Version: 6.0.0.0
Application Timestamp: 4f44797c
Fault Module Name: cwalsp.dll
Fault Module Version: 2.8.13.1
Fault Module Timestamp: 5216c630
Exception Code: c0000005
Exception Offset: 00017914
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789"
Tech specs of my laptop:
Windows 7 Professional
Intel core 2 duo processor
8 gig RAM
64-bit Operating System
I have no idea how to fix this and it's driving me CRAZY.
Thanks,
Spencer

Had the same problem with conflict between CS6 (Photoshop, Premier, After Effects, etc.] and Net Nanny. Solution was as follows:
1. Log onto Net Nanny Admin Tools
2. Click on Application Exceptions
3. Click Add
4. Browse to folder containing "dynamiclinkmanager.exe". On my computer (Windows 7 Pro) it was located in
     C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6
     [I do have dynamiclinkmanager.exe elsewhere, but Net Nanny only allows you to identify a given file name once]
5. Select dynamiclinkmanger.exe, Open, OK
6. Repeat steps 3 to 5 but this time for "dynamiclinkmediaserver.exe" which I found in
     C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
7. Click OK to accept application exceptions
8. Exit Net Nanny Admin Tools
7. On my computer Photoshop would now load without incident, but if necessary reboot.
NOTE: Once I solved the dynamiclinkmanager stopped problem I then encountered an Adobe Media Core stopped problem when I started After Effects and Premier. To resolve this second problem with Net Nanny I repeated the above steps adding the following application exception:
     "Adobe QT32 Server.exe"
     which I found in
     C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
[Again there are multiple copies of "Adobe QT32 Server.exe" but Net Nanny accepts only one, and I selected the one in "Program Files (x86)" and not the ones in "Program Files" because of this is where I also found dynamiclinkmanager.exe. All works fine now.]
Hope this works for you.

ATTENTION: Desktop Manager Has stopped working - SOLVED

Hey everyone!
I've finally, finally solved a
problem I've been dealing with for the past month (since updating DM to the
latest version 6.x.35)
I have a BB Bold 9700 with OS 6.0.0.600 ( by the
way the issue is not related to the OS as I had the error prior to getting this
version).
The problem is that when opening DM, everything is fine AS
LONG as I don't connect my phone. As soon as I do, DM crashes with the dreaded
"DM has stopped working" message. I tried literally everything... Browsed many
forums and found onyl questions without answers... Turns out hundreds of BB
users faced the same problem on various BB models. Out of these I can honestly
say, only 2 managed to fix the issue they were facing.
To start with and
to help people identify if my issue is similar to the one they are facing, I'll
paste the issue as shown in :
Rim.Desktop.Exception.log
14:47:54.860|FATAL|10|Exception|0|Fatal
Error
System.IO.IOException: The directory name is invalid.
at
System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at
System.IO.Directory.InternalGetFileDirectoryNames( String path, String
userPathOriginal, String searchPattern, Boolean includeFiles, Boolean
includeDirs, SearchOption searchOption)
at
System.IO.Directory.GetFiles(String path, String searchPattern, SearchOption
searchOption)
at System.IO.Directory.GetFiles(String path)
at
Rim.Common.Filesystem.Win32FileSystem.<GetFiles>d_ _7.MoveNext()
at
Rim.Common.Filesystem.FolderPath.<GetChildren>d__3 `1.MoveNext()
at
Rim.Common.Filesystem.FolderPathExtensions.<GetChi
ldFiles>d__6.MoveNext()
at
Rim.Media.Common.LibraryIdVersionManager.UpgradeWm sFilesForWmp(IFolderPath
settingsFolder)
at Rim.Media.Common.LibraryIdVersionManager.UpgradeTr
ansactionFiles(IFolderPath settingsFolder)
at
Rim.Media.Device.BlackBerryInfo.CreateDriveInfo(Me diaPaths mediaPaths,
MediaDestinationType destinationType, IInterruptibleFileSystem fileSystem,
Boolean isContentStore)
at Rim.Media.Device.BlackBerryInfo.RefreshDriveInfo(B
oolean isDftpMode, Object token)
at
Rim.Media.Device.DeviceService.OnDeviceAcquired(ID evice device, Object token,
DeviceAcquireResult result)
at
Rim.Desktop.Services.DeviceManager.Device.Internal Login(List`1 loginActions,
Boolean isPrivate)
at Rim.Desktop.Services.DeviceManager.DeviceManager.P
rocessDeviceLoginRequest(Device device)
at
Rim.Desktop.Services.DeviceManager.DeviceManager.<
LoginCurrentDevice>b__11()
at
Rim.Desktop.Services.Tasks.Task.RunOneOperation()
at
Rim.Desktop.Services.Tasks.Task.Run()
at
Rim.Desktop.Services.DeviceManager.DeviceManager.h andleWork(DeviceManagerWork
work)
at Rim.Common.Utilities.QueueWorkThread`1.ThreadProc( )
at
System.Threading.ThreadHelper.ThreadStart_Context( Object state)
at
System.Threading.ExecutionContext.Run(ExecutionCon text executionContext,
ContextCallback callback, Object state)
at
System.Threading.ThreadHelper.ThreadStart()
Now my problem is
that unlike other error logs posted by users on various forums, mine didn't show
what the issue was... There is a gap between the 1st and 2nd lines in the log.
In all error logs I saw, that missing line was supposed to hold details on the
issue. In my case, the "invalid directory name".
I tried
reinstalling DM without success and after seeing that so many people on the web
had given up considering RIM was not taking any action, I joined the club and
even made the decision not to buy the 9900 once it is released.
Finally
today, for some reason while working on resolving an issue in an application I
use at work, I decided to use a tool for trying to solve the DM crash... The
tool is Process Monitor (procmon.exe) and is an AMAZING tool to see exactly what
happens when you run any process (executable or others).
Granted it's
not very accessible and users who don't work in IT might not be familiar with
many terms/features in this tool, but I honestly don't think there is any other
way to identify the problem you're facing in DM.
In my case I noticed in
the captured activity of Process Monitor that there were two "path not found"
issues just before the activity related to writing into the error log started.
The 2 paths were :
F:\BlackBerry\system\Media Sync\xxxxx.system
C:\Users\Nicolas\AppData\Roaming\Research In Motion\BlackBerry Media
Sync\<mypin>.settings
First path is on the blackberry itself
and in my case I had a file named "media sync" but no folder. I renamed that
file and created the folder with that name.
For the 2nd path, which was
very strange, I could not find a file matching my BB pin... There was another
one matching my wife's pin. I just took a copy of it and renamed it to my pin
number.
After these 2 adjustments I reopened DM and I got a message
that a new device had been detected. I did a few settings and my BB connected
successfully... No crash... I tried syncing, backup and everything seems to be
working fine now.
I hope this helps others in investigating the
issues they are facing. By the way in Process Monitor be sure to first access
the Filter options and select process name as : "rim.destop.exe"
This will
monitor ONLY the activity related to DM.

Hi Nicolas81...
Thanks for the detail here. just to let you know, we have logged a bug with the Desktop Manager development team to have this fixed for the next version.
Cheers
M
Need additional information on BlackBerry products?
visit: http://www.blackberry.net

Alltel 8330 Curve "Blackberry Device Manager has stopped working" HELP!

I am a brand new smartphone owner, and first time owner of any Blackberry product, so I am a little overwhelmed here. My problem stared about a month after I purchased my Curve. Everything was working great, syncing everything, no problem. Then, I started getting the following message:
"Blackberry Device has stopped Working" with the additional verbage underneath "Windows is checking for a solution", after about 2 nanoseconds, that goes away and the following message is displayed "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I am running a new HP PC with Vista 64bit OS.
The error occurs only while syncing my calendar; I have been able to sync everything else. I have downloaded the most current desktop manager software ver. 4.7 english without media manager.
I have seen many other users having problems synching their calendar, but I am not sure if I have the same problem for the same reasons.
Any help would be greatly appreciated!
Thank you,
Hank

The reason your device is running sluggishly is that you are running OS 4.5 on it. That is the latest OS the 8100 will run. However, it's slow running that big OS. There is no OS 5 or 6 for the 8100. You may be able to update to a slightly newer version of the 4.5 (4.5.0.188 is the latest) but you won't see much difference.
If you want to update to it you can follow the instructions here:
http://www.blackberryforums.com/general-8100-series-discussion-pearl/236835-latest-os-8100-4-5-0-313...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Catalyst install manager has stopped working

Similar Messages

Maybe you are looking for