Catalyst legacy

Hello to everyone
Iam a new arch user, but I had linux (debian, fedora etc) for many years.
I have a problem when trying to install the fglrx modules.
I tried using the unofficials repos ... but I ended to just a black screen.
I tried the catalyst generator and at the installation of the modules an error prompt about the depmod, not found.
I am sure that I had all the configuration steps done.
I have an ati radeon mobility 4000.
Could someone confirm an complete installation?
And with which method.
Thnk you!

Hi, I've got the same problem as you with catalyst-total-hd234k and xorg-server 1.12.3.
But downgrading to 1.11 fixed it for me.
Add the following above all repositories in your pacman.conf:
[xorg111]
Server = http://catalyst.apocalypsus.net/repo/xorg111/$arch
Then run
# pacman -Syuu
to downgrade xorg-server.

Similar Messages

  • Real trouble trying to install Catalyst Legacy

    I'm kind of in trouble trying to install catalyst-total-hd234k package from the AUR
    using yaourt to achieve this, enabled the xorg112 package to downgrade, tried pacman directly and makepkg, same result
    It asks a lot of dependencies conflicting with catalyst drivers, so I accept to remove before downgrading to 1.12
    It goes through like if nothing was up after downgrading, package installs without any error
    Following the AMD Catalyst wiki page in here leads me to have a black screen after reboot
    EDIT 2: Process of reproducing the problem I'm facing
    - I enable the xorg112 repository on top of every other in /etc/pacman.conf
    - Downgrade xorg with
    # pacman -S xorg
    :: There are 79 members in group xorg:
    :: Repository xorg112
    1) xf86-input-acecad 2) xf86-input-aiptek 3) xf86-input-evdev 4) xf86-input-joystick 5) xf86-input-keyboard 6) xf86-input-mouse 7) xf86-input-synaptics
    8) xf86-input-vmmouse 9) xf86-input-void 10) xf86-video-apm 11) xf86-video-fbdev 12) xf86-video-intel 13) xf86-video-v4l 14) xf86-video-vesa
    :: Repository extra
    15) xf86-video-ark 16) xf86-video-ast 17) xf86-video-ati 18) xf86-video-cirrus 19) xf86-video-dummy 20) xf86-video-glint 21) xf86-video-i128
    22) xf86-video-mach64 23) xf86-video-mga 24) xf86-video-modesetting 25) xf86-video-neomagic 26) xf86-video-nouveau 27) xf86-video-nv 28) xf86-video-openchrome
    29) xf86-video-r128 30) xf86-video-savage 31) xf86-video-siliconmotion 32) xf86-video-sis 33) xf86-video-tdfx 34) xf86-video-trident 35) xf86-video-vmware
    36) xf86-video-voodoo 37) xorg-bdftopcf 38) xorg-docs 39) xorg-font-util 40) xorg-fonts-100dpi 41) xorg-fonts-75dpi 42) xorg-fonts-encodings 43) xorg-iceauth
    44) xorg-luit 45) xorg-mkfontdir 46) xorg-mkfontscale 47) xorg-server 48) xorg-sessreg 49) xorg-setxkbmap 50) xorg-smproxy 51) xorg-x11perf 52) xorg-xauth
    53) xorg-xbacklight 54) xorg-xcmsdb 55) xorg-xcursorgen 56) xorg-xdpyinfo 57) xorg-xdriinfo 58) xorg-xev 59) xorg-xgamma 60) xorg-xhost 61) xorg-xinput
    62) xorg-xkbcomp 63) xorg-xkbevd 64) xorg-xkbutils 65) xorg-xkill 66) xorg-xlsatoms 67) xorg-xlsclients 68) xorg-xmodmap 69) xorg-xpr 70) xorg-xprop
    71) xorg-xrandr 72) xorg-xrdb 73) xorg-xrefresh 74) xorg-xset 75) xorg-xsetroot 76) xorg-xvinfo 77) xorg-xwd 78) xorg-xwininfo 79) xorg-xwud
    Enter a selection (default=all):
    warning: downgrading package xf86-input-evdev (2.9.1-1 => 2.7.3-1)
    warning: downgrading package xf86-input-joystick (1.6.2-5 => 1.6.1-1)
    warning: downgrading package xf86-input-keyboard (1.8.0-3 => 1.6.2-1)
    warning: downgrading package xf86-input-mouse (1.9.1-1 => 1.8.1-1)
    warning: downgrading package xf86-input-synaptics (1.8.1-1 => 1.6.2-1)
    warning: downgrading package xf86-input-vmmouse (13.0.0-5 => 12.9.0-1)
    warning: downgrading package xf86-input-void (1.4.0-7 => 1.4.0-3)
    warning: downgrading package xf86-video-fbdev (0.4.4-3 => 0.4.3-1)
    warning: downgrading package xf86-video-intel (2.99.917-1 => 2.20.2-2)
    warning: downgrading package xf86-video-v4l (0.2.0-14 => 0.2.0-10)
    warning: downgrading package xf86-video-vesa (2.3.2-5 => 2.3.2-1)
    warning: xf86-video-ark-0.7.5-5 is up to date -- reinstalling
    warning: xf86-video-ast-0.97.0-5 is up to date -- reinstalling
    warning: xf86-video-ati-1:7.5.0-1 is up to date -- reinstalling
    warning: xf86-video-cirrus-1.5.2-4 is up to date -- reinstalling
    warning: xf86-video-dummy-0.3.7-3 is up to date -- reinstalling
    warning: xf86-video-glint-1.2.8-5 is up to date -- reinstalling
    warning: xf86-video-i128-1.3.6-5 is up to date -- reinstalling
    warning: xf86-video-mach64-6.9.4-4 is up to date -- reinstalling
    warning: xf86-video-mga-1.6.3-3 is up to date -- reinstalling
    warning: xf86-video-modesetting-0.9.0-2 is up to date -- reinstalling
    warning: xf86-video-neomagic-1.2.8-3 is up to date -- reinstalling
    warning: xf86-video-nouveau-1.0.11-2 is up to date -- reinstalling
    warning: xf86-video-nv-2.1.20-5 is up to date -- reinstalling
    warning: xf86-video-openchrome-0.3.3-4 is up to date -- reinstalling
    warning: xf86-video-r128-6.9.2-3 is up to date -- reinstalling
    warning: xf86-video-savage-2.3.7-3 is up to date -- reinstalling
    warning: xf86-video-siliconmotion-1.7.7-5 is up to date -- reinstalling
    warning: xf86-video-sis-0.10.7-6 is up to date -- reinstalling
    warning: xf86-video-tdfx-1.4.5-5 is up to date -- reinstalling
    warning: xf86-video-trident-1.3.6-6 is up to date -- reinstalling
    warning: xf86-video-vmware-13.0.2-2 is up to date -- reinstalling
    warning: xf86-video-voodoo-1.2.5-5 is up to date -- reinstalling
    warning: xorg-bdftopcf-1.0.5-1 is up to date -- reinstalling
    warning: xorg-docs-1.7-2 is up to date -- reinstalling
    warning: xorg-font-util-1.3.0-2 is up to date -- reinstalling
    warning: xorg-fonts-100dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-75dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-encodings-1.0.4-4 is up to date -- reinstalling
    warning: xorg-iceauth-1.0.6-1 is up to date -- reinstalling
    warning: xorg-luit-1.1.1-2 is up to date -- reinstalling
    warning: xorg-mkfontdir-1.0.7-2 is up to date -- reinstalling
    warning: xorg-mkfontscale-1.1.1-1 is up to date -- reinstalling
    warning: xorg-server-1.16.3-2 is up to date -- reinstalling
    warning: xorg-sessreg-1.0.8-2 is up to date -- reinstalling
    warning: xorg-setxkbmap-1.3.0-2 is up to date -- reinstalling
    warning: xorg-smproxy-1.0.5-2 is up to date -- reinstalling
    warning: xorg-x11perf-1.5.4-2 is up to date -- reinstalling
    warning: xorg-xauth-1.0.9-1 is up to date -- reinstalling
    warning: xorg-xbacklight-1.2.1-1 is up to date -- reinstalling
    warning: xorg-xcmsdb-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xcursorgen-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xdpyinfo-1.3.1-1 is up to date -- reinstalling
    warning: xorg-xdriinfo-1.0.4-4 is up to date -- reinstalling
    warning: xorg-xev-1.2.1-2 is up to date -- reinstalling
    warning: xorg-xgamma-1.0.5-2 is up to date -- reinstalling
    warning: xorg-xhost-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xinput-1.6.1-1 is up to date -- reinstalling
    warning: xorg-xkbcomp-1.3.0-1 is up to date -- reinstalling
    warning: xorg-xkbevd-1.1.3-2 is up to date -- reinstalling
    warning: xorg-xkbutils-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xkill-1.0.4-1 is up to date -- reinstalling
    warning: xorg-xlsatoms-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xlsclients-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xmodmap-1.0.8-1 is up to date -- reinstalling
    warning: xorg-xpr-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xprop-1.2.2-1 is up to date -- reinstalling
    warning: xorg-xrandr-1.4.3-1 is up to date -- reinstalling
    warning: xorg-xrdb-1.1.0-1 is up to date -- reinstalling
    warning: xorg-xrefresh-1.0.5-1 is up to date -- reinstalling
    warning: xorg-xset-1.2.3-1 is up to date -- reinstalling
    warning: xorg-xsetroot-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xvinfo-1.1.2-2 is up to date -- reinstalling
    warning: xorg-xwd-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xwininfo-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xwud-1.0.4-2 is up to date -- reinstalling
    resolving dependencies...
    looking for conflicting packages...
    Packages (79) xf86-input-acecad-1.5.0-3 xf86-input-aiptek-1.4.1-3 xf86-input-evdev-2.7.3-1 xf86-input-joystick-1.6.1-1 xf86-input-keyboard-1.6.2-1
    xf86-input-mouse-1.8.1-1 xf86-input-synaptics-1.6.2-1 xf86-input-vmmouse-12.9.0-1 xf86-input-void-1.4.0-3 xf86-video-apm-1.2.5-1
    xf86-video-ark-0.7.5-5 xf86-video-ast-0.97.0-5 xf86-video-ati-1:7.5.0-1 xf86-video-cirrus-1.5.2-4 xf86-video-dummy-0.3.7-3 xf86-video-fbdev-0.4.3-1
    xf86-video-glint-1.2.8-5 xf86-video-i128-1.3.6-5 xf86-video-intel-2.20.2-2 xf86-video-mach64-6.9.4-4 xf86-video-mga-1.6.3-3
    xf86-video-modesetting-0.9.0-2 xf86-video-neomagic-1.2.8-3 xf86-video-nouveau-1.0.11-2 xf86-video-nv-2.1.20-5 xf86-video-openchrome-0.3.3-4
    xf86-video-r128-6.9.2-3 xf86-video-savage-2.3.7-3 xf86-video-siliconmotion-1.7.7-5 xf86-video-sis-0.10.7-6 xf86-video-tdfx-1.4.5-5
    xf86-video-trident-1.3.6-6 xf86-video-v4l-0.2.0-10 xf86-video-vesa-2.3.2-1 xf86-video-vmware-13.0.2-2 xf86-video-voodoo-1.2.5-5
    xorg-bdftopcf-1.0.5-1 xorg-docs-1.7-2 xorg-font-util-1.3.0-2 xorg-fonts-100dpi-1.0.3-2 xorg-fonts-75dpi-1.0.3-2 xorg-fonts-encodings-1.0.4-4
    xorg-iceauth-1.0.6-1 xorg-luit-1.1.1-2 xorg-mkfontdir-1.0.7-2 xorg-mkfontscale-1.1.1-1 xorg-server-1.16.3-2 xorg-sessreg-1.0.8-2
    xorg-setxkbmap-1.3.0-2 xorg-smproxy-1.0.5-2 xorg-x11perf-1.5.4-2 xorg-xauth-1.0.9-1 xorg-xbacklight-1.2.1-1 xorg-xcmsdb-1.0.4-2
    xorg-xcursorgen-1.0.6-1 xorg-xdpyinfo-1.3.1-1 xorg-xdriinfo-1.0.4-4 xorg-xev-1.2.1-2 xorg-xgamma-1.0.5-2 xorg-xhost-1.0.6-1 xorg-xinput-1.6.1-1
    xorg-xkbcomp-1.3.0-1 xorg-xkbevd-1.1.3-2 xorg-xkbutils-1.0.4-2 xorg-xkill-1.0.4-1 xorg-xlsatoms-1.1.1-2 xorg-xlsclients-1.1.3-1
    xorg-xmodmap-1.0.8-1 xorg-xpr-1.0.4-2 xorg-xprop-1.2.2-1 xorg-xrandr-1.4.3-1 xorg-xrdb-1.1.0-1 xorg-xrefresh-1.0.5-1 xorg-xset-1.2.3-1
    xorg-xsetroot-1.1.1-2 xorg-xvinfo-1.1.2-2 xorg-xwd-1.0.6-1 xorg-xwininfo-1.1.3-1 xorg-xwud-1.0.4-2
    Total Installed Size: 36.11 MiB
    Net Upgrade Size: -0.52 MiB
    :: Proceed with installation? [Y/n] Y
    (79/79) checking keys in keyring [############################################################] 100%
    (79/79) checking package integrity [############################################################] 100%
    (79/79) loading package files [############################################################] 100%
    (79/79) checking for file conflicts [############################################################] 100%
    (79/79) checking available disk space [############################################################] 100%
    ( 1/79) installing xf86-input-acecad [############################################################] 100%
    ( 2/79) installing xf86-input-aiptek [############################################################] 100%
    ( 3/79) downgrading xf86-input-evdev [############################################################] 100%
    ( 4/79) downgrading xf86-input-joystick [############################################################] 100%
    ( 5/79) downgrading xf86-input-keyboard [############################################################] 100%
    ( 6/79) downgrading xf86-input-mouse [############################################################] 100%
    ( 7/79) downgrading xf86-input-synaptics [############################################################] 100%
    ( 8/79) downgrading xf86-input-vmmouse [############################################################] 100%
    ( 9/79) downgrading xf86-input-void [############################################################] 100%
    (10/79) installing xf86-video-apm [############################################################] 100%
    (11/79) downgrading xf86-video-fbdev [############################################################] 100%
    (12/79) downgrading xf86-video-intel [############################################################] 100%
    (13/79) downgrading xf86-video-v4l [############################################################] 100%
    (14/79) downgrading xf86-video-vesa [############################################################] 100%
    (15/79) reinstalling xf86-video-ark [############################################################] 100%
    (16/79) reinstalling xf86-video-ast [############################################################] 100%
    (17/79) reinstalling xf86-video-ati [############################################################] 100%
    (18/79) reinstalling xf86-video-cirrus [############################################################] 100%
    (19/79) reinstalling xf86-video-dummy [############################################################] 100%
    (20/79) reinstalling xf86-video-glint [############################################################] 100%
    (21/79) reinstalling xf86-video-i128 [############################################################] 100%
    (22/79) reinstalling xf86-video-mach64 [############################################################] 100%
    (23/79) reinstalling xf86-video-mga [############################################################] 100%
    (24/79) reinstalling xf86-video-modesetting [############################################################] 100%
    (25/79) reinstalling xf86-video-neomagic [############################################################] 100%
    (26/79) reinstalling xf86-video-nouveau [############################################################] 100%
    (27/79) reinstalling xf86-video-nv [############################################################] 100%
    (28/79) reinstalling xf86-video-openchrome [############################################################] 100%
    (29/79) reinstalling xf86-video-r128 [############################################################] 100%
    (30/79) reinstalling xf86-video-savage [############################################################] 100%
    (31/79) reinstalling xf86-video-siliconmotion [############################################################] 100%
    (32/79) reinstalling xf86-video-sis [############################################################] 100%
    (33/79) reinstalling xf86-video-tdfx [############################################################] 100%
    (34/79) reinstalling xf86-video-trident [############################################################] 100%
    (35/79) reinstalling xf86-video-vmware [############################################################] 100%
    (36/79) reinstalling xf86-video-voodoo [############################################################] 100%
    (37/79) reinstalling xorg-bdftopcf [############################################################] 100%
    (38/79) reinstalling xorg-docs [############################################################] 100%
    (39/79) reinstalling xorg-font-util [############################################################] 100%
    (40/79) reinstalling xorg-fonts-encodings [############################################################] 100%
    (41/79) reinstalling xorg-mkfontscale [############################################################] 100%
    (42/79) reinstalling xorg-mkfontdir [############################################################] 100%
    (43/79) reinstalling xorg-fonts-100dpi [############################################################] 100%
    Updating font cache... done.
    (44/79) reinstalling xorg-fonts-75dpi [############################################################] 100%
    Updating font cache... done.
    (45/79) reinstalling xorg-iceauth [############################################################] 100%
    (46/79) reinstalling xorg-luit [############################################################] 100%
    (47/79) reinstalling xorg-setxkbmap [############################################################] 100%
    (48/79) reinstalling xorg-xkbcomp [############################################################] 100%
    (49/79) reinstalling xorg-server [############################################################] 100%
    (50/79) reinstalling xorg-sessreg [############################################################] 100%
    (51/79) reinstalling xorg-smproxy [############################################################] 100%
    (52/79) reinstalling xorg-x11perf [############################################################] 100%
    (53/79) reinstalling xorg-xauth [############################################################] 100%
    (54/79) reinstalling xorg-xbacklight [############################################################] 100%
    (55/79) reinstalling xorg-xcmsdb [############################################################] 100%
    (56/79) reinstalling xorg-xcursorgen [############################################################] 100%
    (57/79) reinstalling xorg-xdpyinfo [############################################################] 100%
    (58/79) reinstalling xorg-xdriinfo [############################################################] 100%
    (59/79) reinstalling xorg-xev [############################################################] 100%
    (60/79) reinstalling xorg-xgamma [############################################################] 100%
    (61/79) reinstalling xorg-xhost [############################################################] 100%
    (62/79) reinstalling xorg-xrandr [############################################################] 100%
    (63/79) reinstalling xorg-xinput [############################################################] 100%
    (64/79) reinstalling xorg-xkbevd [############################################################] 100%
    (65/79) reinstalling xorg-xkbutils [############################################################] 100%
    (66/79) reinstalling xorg-xkill [############################################################] 100%
    (67/79) reinstalling xorg-xlsatoms [############################################################] 100%
    (68/79) reinstalling xorg-xlsclients [############################################################] 100%
    (69/79) reinstalling xorg-xmodmap [############################################################] 100%
    (70/79) reinstalling xorg-xpr [############################################################] 100%
    (71/79) reinstalling xorg-xprop [############################################################] 100%
    (72/79) reinstalling xorg-xrdb [############################################################] 100%
    (73/79) reinstalling xorg-xrefresh [############################################################] 100%
    (74/79) reinstalling xorg-xset [############################################################] 100%
    (75/79) reinstalling xorg-xsetroot [############################################################] 100%
    (76/79) reinstalling xorg-xvinfo [############################################################] 100%
    (77/79) reinstalling xorg-xwd [############################################################] 100%
    (78/79) reinstalling xorg-xwininfo [############################################################] 100%
    (79/79) reinstalling xorg-xwud [############################################################] 100%
    - Then I use yaourt (for convenience) to install catalyst-total-hd234k, same happens with catalyst packages when I use catalyst-hd234k repository
    $ yaourt -S catalyst-total-hd234k
    ==> Downloading catalyst-total-hd234k PKGBUILD from AUR...
    x .SRCINFO
    x catalyst-total-hd234k.install
    x fglrx_gpl_symbol.patch
    x cold-fglrx-3.14-current_euid.patch
    x arch_3.13_kernel_acpi_node.patch
    x lano1106_kcl_agp_13_4.patch
    x lano1106_fglrx_intel_iommu.patch
    x foutrelis_3.10_fix_for_legacy.patch
    x gentoo_linux-3.10-proc.diff
    x arch-fglrx-3.8.patch
    x arch-fglrx-3.7.patch
    x 3.5-do_mmap.patch
    x catalyst-hook.service
    x makefile_compat.patch
    x ati_make.sh
    x hook-fglrx
    x arch-fglrx-authatieventsd_new.patch
    x catalyst.conf
    x atieventsd.service
    x atieventsd.sh
    x catalyst.sh
    x lib32-catalyst.sh
    x catalyst_build_module
    x PKGBUILD
    Comment by Vi0L0 (2014-10-09 18:40)
    let me paste form the grill:
    I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
    Comment by doblerone (2014-12-17 19:15)
    During the last update, apparently there are some conflicts between catalyst-libgl and catalyst-total-hd234k. The suggestion is to remove catalyst-total-hd234k.
    Comment by Vi0L0 (2014-12-18 08:14)
    You are probably using libva-xvba-drivers which from yesterday depend on catalyst-libgl, i will add it to provides array after getting back home
    Comment by Vi0L0 (2014-12-18 21:50)
    13.1-29:
    - added catalyst-libgl, opencl-catalyst, lib32-catalyst-libgl and lib32-opencl-catalyst into provides array to satisfy libva-xvba-driver (and maybe other that will come in the future) deps;
    - added linux 3.18 support (i cannot test it actually, i can see it compiles fine though)
    Comment by K3pler (2015-01-05 12:43)
    Planning to replace my ultra outdated x1950pro for a less outdated hd3870 lol.
    And using this driver i probably need to downgrade xorg-server from 1.16 to 1.12 from the aur, right???
    Thanks for your work VioLO
    catalyst-total-hd234k 13.1-29 (mar jun 12 10:59:12 CST 2012)
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> catalyst-total-hd234k dependencies:
    - linux>=3.0 (already installed)
    - linux<3.19 (already installed)
    - linux-headers (already installed)
    - xorg-server>=1.7.0 (already installed)
    - netkit-bsd-finger (already installed)
    - libxrandr (already installed)
    - libsm (already installed)
    - fontconfig (already installed)
    - libxcursor (already installed)
    - libxi (already installed)
    - gcc-libs (already installed)
    - gcc>4.0.0 (already installed)
    - make (already installed)
    - patch (already installed)
    - libxinerama (already installed)
    - mesa>=10.1.0-4 (already installed)
    - lib32-libxext (already installed)
    - lib32-libdrm (already installed)
    - lib32-libxinerama (already installed)
    - lib32-mesa>=10.1.0-4 (already installed)
    - xorg-server<1.13.0 (package found)
    ==> Edit catalyst-total-hd234k.install ? [Y/n] ("A" to abort)
    ==> ---------------------------------------------------------
    ==> n
    ==> Continue building catalyst-total-hd234k ? [Y/n]
    ==> -----------------------------------------------
    ==>
    ==> Building and installing package
    ==> Install or build missing dependencies for catalyst-total-hd234k:
    warning: downgrading package xorg-server (1.16.3-2 => 1.12.4-3)
    resolving dependencies...
    looking for conflicting packages...
    :: xorg-server and xf86-video-ark are in conflict. Remove xf86-video-ark? [y/N] Y
    :: xorg-server and xf86-video-ast are in conflict. Remove xf86-video-ast? [y/N] y
    :: xorg-server and xf86-video-ati are in conflict. Remove xf86-video-ati? [y/N] y
    :: xorg-server and xf86-video-cirrus are in conflict. Remove xf86-video-cirrus? [y/N] y
    :: xorg-server and xf86-video-dummy are in conflict. Remove xf86-video-dummy? [y/N] y
    :: xorg-server and xf86-video-glint are in conflict. Remove xf86-video-glint? [y/N] y
    :: xorg-server and xf86-video-i128 are in conflict. Remove xf86-video-i128? [y/N] y
    :: xorg-server and xf86-video-mach64 are in conflict. Remove xf86-video-mach64? [y/N] y
    :: xorg-server and xf86-video-mga are in conflict. Remove xf86-video-mga? [y/N] y
    :: xorg-server and xf86-video-modesetting are in conflict. Remove xf86-video-modesetting? [y/N] y
    :: xorg-server and xf86-video-neomagic are in conflict. Remove xf86-video-neomagic? [y/N] y
    :: xorg-server and xf86-video-nouveau are in conflict. Remove xf86-video-nouveau? [y/N] y
    :: xorg-server and xf86-video-nv are in conflict. Remove xf86-video-nv? [y/N] y
    :: xorg-server and xf86-video-openchrome are in conflict. Remove xf86-video-openchrome? [y/N] y
    :: xorg-server and xf86-video-r128 are in conflict. Remove xf86-video-r128? [y/N] y
    :: xorg-server and xf86-video-savage are in conflict. Remove xf86-video-savage? [y/N] y
    :: xorg-server and xf86-video-siliconmotion are in conflict. Remove xf86-video-siliconmotion? [y/N] y
    :: xorg-server and xf86-video-sis are in conflict. Remove xf86-video-sis? [y/N] y
    :: xorg-server and xf86-video-tdfx are in conflict. Remove xf86-video-tdfx? [y/N] y
    :: xorg-server and xf86-video-trident are in conflict. Remove xf86-video-trident? [y/N] y
    :: xorg-server and xf86-video-vmware are in conflict. Remove xf86-video-vmware? [y/N] y
    :: xorg-server and xf86-video-voodoo are in conflict. Remove xf86-video-voodoo? [y/N] y
    Packages (23) xf86-video-ark-0.7.5-5 [removal] xf86-video-ast-0.97.0-5 [removal] xf86-video-ati-1:7.5.0-1 [removal] xf86-video-cirrus-1.5.2-4 [removal]
    xf86-video-dummy-0.3.7-3 [removal] xf86-video-glint-1.2.8-5 [removal] xf86-video-i128-1.3.6-5 [removal] xf86-video-mach64-6.9.4-4 [removal]
    xf86-video-mga-1.6.3-3 [removal] xf86-video-modesetting-0.9.0-2 [removal] xf86-video-neomagic-1.2.8-3 [removal] xf86-video-nouveau-1.0.11-2 [removal]
    xf86-video-nv-2.1.20-5 [removal] xf86-video-openchrome-0.3.3-4 [removal] xf86-video-r128-6.9.2-3 [removal] xf86-video-savage-2.3.7-3 [removal]
    xf86-video-siliconmotion-1.7.7-5 [removal] xf86-video-sis-0.10.7-6 [removal] xf86-video-tdfx-1.4.5-5 [removal] xf86-video-trident-1.3.6-6 [removal]
    xf86-video-vmware-13.0.2-2 [removal] xf86-video-voodoo-1.2.5-5 [removal] xorg-server-1.12.4-3
    Total Installed Size: 3.73 MiB
    Net Upgrade Size: -3.31 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (23/23) checking available disk space [############################################################] 100%
    ( 1/22) removing xf86-video-voodoo [############################################################] 100%
    ( 2/22) removing xf86-video-vmware [############################################################] 100%
    ( 3/22) removing xf86-video-trident [############################################################] 100%
    ( 4/22) removing xf86-video-tdfx [############################################################] 100%
    ( 5/22) removing xf86-video-sis [############################################################] 100%
    ( 6/22) removing xf86-video-siliconmotion [############################################################] 100%
    ( 7/22) removing xf86-video-savage [############################################################] 100%
    ( 8/22) removing xf86-video-r128 [############################################################] 100%
    ( 9/22) removing xf86-video-openchrome [############################################################] 100%
    (10/22) removing xf86-video-nv [############################################################] 100%
    (11/22) removing xf86-video-nouveau [############################################################] 100%
    (12/22) removing xf86-video-neomagic [############################################################] 100%
    (13/22) removing xf86-video-modesetting [############################################################] 100%
    (14/22) removing xf86-video-mga [############################################################] 100%
    (15/22) removing xf86-video-mach64 [############################################################] 100%
    (16/22) removing xf86-video-i128 [############################################################] 100%
    (17/22) removing xf86-video-glint [############################################################] 100%
    (18/22) removing xf86-video-dummy [############################################################] 100%
    (19/22) removing xf86-video-cirrus [############################################################] 100%
    (20/22) removing xf86-video-ati [############################################################] 100%
    (21/22) removing xf86-video-ast [############################################################] 100%
    (22/22) removing xf86-video-ark [############################################################] 100%
    (1/1) downgrading xorg-server [############################################################] 100%
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Making package: catalyst-total-hd234k 13.1-29 (mié ene 7 22:22:26 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 101M 100 101M 0 0 103k 0 0:16:44 0:16:44 --:--:-- 105k
    -> Found catalyst_build_module
    -> Found lib32-catalyst.sh
    -> Found catalyst.sh
    -> Found atieventsd.sh
    -> Found atieventsd.service
    -> Found catalyst.conf
    -> Found arch-fglrx-authatieventsd_new.patch
    -> Found hook-fglrx
    -> Found ati_make.sh
    -> Found makefile_compat.patch
    -> Found catalyst-hook.service
    -> Found 3.5-do_mmap.patch
    -> Found arch-fglrx-3.7.patch
    -> Found arch-fglrx-3.8.patch
    -> Found gentoo_linux-3.10-proc.diff
    -> Found foutrelis_3.10_fix_for_legacy.patch
    -> Found lano1106_fglrx_intel_iommu.patch
    -> Found lano1106_kcl_agp_13_4.patch
    -> Found arch_3.13_kernel_acpi_node.patch
    -> Found cold-fglrx-3.14-current_euid.patch
    -> Found fglrx_gpl_symbol.patch
    ==> Validating source files with md5sums...
    amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip ... Passed
    catalyst_build_module ... Passed
    lib32-catalyst.sh ... Passed
    catalyst.sh ... Passed
    atieventsd.sh ... Passed
    atieventsd.service ... Passed
    catalyst.conf ... Passed
    arch-fglrx-authatieventsd_new.patch ... Passed
    hook-fglrx ... Passed
    ati_make.sh ... Passed
    makefile_compat.patch ... Passed
    catalyst-hook.service ... Passed
    3.5-do_mmap.patch ... Passed
    arch-fglrx-3.7.patch ... Passed
    arch-fglrx-3.8.patch ... Passed
    gentoo_linux-3.10-proc.diff ... Passed
    foutrelis_3.10_fix_for_legacy.patch ... Passed
    lano1106_fglrx_intel_iommu.patch ... Passed
    lano1106_kcl_agp_13_4.patch ... Passed
    arch_3.13_kernel_acpi_node.patch ... Passed
    cold-fglrx-3.14-current_euid.patch ... Passed
    fglrx_gpl_symbol.patch ... Passed
    ==> Extracting sources...
    -> Extracting amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip with bsdtar
    ==> Starting build()...
    Creating directory archive_files
    Verifying archive integrity... All good.
    Uncompressing AMD Catalyst(TM) Proprietary Driver-8.97.100.7....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    ==> Entering fakeroot environment...
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Starting package()...
    patching file etc/ati/authatieventsd.sh
    patching file common/lib/modules/fglrx/build_mod/2.6.x/Makefile
    Hunk #1 succeeded at 68 (offset 2 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 2136 (offset 30 lines).
    Hunk #2 succeeded at 2153 (offset 30 lines).
    Hunk #3 succeeded at 2170 (offset 30 lines).
    Hunk #4 succeeded at 2183 (offset 30 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 3710 (offset -182 lines).
    Hunk #2 succeeded at 3744 (offset -182 lines).
    Hunk #3 succeeded at 3767 (offset -182 lines).
    Hunk #4 succeeded at 3780 (offset -182 lines).
    Hunk #5 succeeded at 3826 (offset -182 lines).
    Hunk #6 succeeded at 3865 (offset -182 lines).
    Hunk #7 succeeded at 3883 (offset -182 lines).
    Hunk #8 succeeded at 3908 (offset -182 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    patching file common/lib/modules/fglrx/build_mod/drmP.h
    patching file common/lib/modules/fglrx/build_mod/drm_proc.h
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 571 (offset -12 lines).
    Hunk #2 succeeded at 861 (offset -12 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    patch unexpectedly ends in middle of line
    Hunk #1 succeeded at 34 with fuzz 1.
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 97 with fuzz 2 (offset 4 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_agp.c
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    Hunk #1 succeeded at 775 (offset -3 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 1756 with fuzz 2 (offset -5 lines).
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    ==> Creating package "catalyst-total-hd234k"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: catalyst-total-hd234k 13.1-29 (mié ene 7 22:44:01 CST 2015)
    ==> Continue installing catalyst-total-hd234k ? [Y/n]
    ==> [v]iew package contents [c]heck package with namcap
    ==> ---------------------------------------------------
    ==> Y
    [sudo] password for mario:
    [sudo] password for mario:
    loading packages...
    resolving dependencies...
    looking for conflicting packages...
    :: catalyst-total-hd234k and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and libcl are in conflict. Remove libcl? [y/N] Y
    :: catalyst-total-hd234k and lib32-mesa-libgl are in conflict (lib32-libgl). Remove lib32-mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and lib32-libcl are in conflict. Remove lib32-libcl? [y/N] Y
    Packages (5) lib32-libcl-1.1-1 [removal] lib32-mesa-libgl-10.4.1-1 [removal] libcl-1.1-4 [removal] mesa-libgl-10.4.1-1 [removal] catalyst-total-hd234k-13.1-29
    Total Installed Size: 222.80 MiB
    Net Upgrade Size: 222.68 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (5/5) checking available disk space [############################################################] 100%
    (1/4) removing lib32-libcl [############################################################] 100%
    (2/4) removing lib32-mesa-libgl [############################################################] 100%
    (3/4) removing libcl [############################################################] 100%
    (4/4) removing mesa-libgl [############################################################] 100%
    (1/1) installing catalyst-total-hd234k [############################################################] 100%
    Building fglrx module for 3.17.6-1-ARCH kernel ...
    Ok.
    Add nomodeset to your kernel line in /boot/grub/menu.lst , ie.:
    kernel /boot/vmlinuz-linux root=/dev/sda1 ro nomodeset
    You can use the tool 'aticonfig' to generate an xorg.conf file.
    --------------------- ^^^^^^^^^ --------------------------------
    fglrx was added into /etc/modules-load.d/catalyst.conf
    atieventsd (needs acpid pkg) on systemd:
    systemctl enable atieventsd
    systemctl start atieventsd
    For more info and troubleshooting visit:
    http://wiki.archlinux.org/index.php/ATI_Catalyst
    ATTENTION!
    To enable 'automatic re-compilation while system shutdown/reboot'
    testing feature run these commands as root:
    systemctl enable catalyst-hook
    systemctl start catalyst-hook
    More info here:
    https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
    Optional dependencies for catalyst-total-hd234k
    qt4: to run ATi Catalyst Control Center (amdcccle) [installed]
    libxxf86vm: to run ATi Catalyst Control Center (amdcccle) [installed]
    opencl-headers: headers necessary for OpenCL development
    acpid: acpi event support / atieventsd [installed]
    linux-lts-headers: to build the fglrx module for the linux-lts kernel
    ==> Checking vote status for catalyst-total-hd234k
    You have already voted for catalyst-total-hd234k
    ==> Packages no longer required by any installed package:
    libepoxy
    - Then, I re-enable catalyst-hook (and optionally atieventsd) to be able to build modules at end and start of pc
    $ sudo systemctl disable catalyst-hook
    Removed symlink /etc/systemd/system/multi-user.target.wants/catalyst-hook.service.
    $ sudo systemctl disable atieventsd
    Removed symlink /etc/systemd/system/multi-user.target.wants/atieventsd.service.
    $ sudo systemctl enable catalyst-hook
    Created symlink from /etc/systemd/system/multi-user.target.wants/catalyst-hook.service to /usr/lib/systemd/system/catalyst-hook.service.
    $ sudo systemctl enable atieventsd
    Created symlink from /etc/systemd/system/multi-user.target.wants/atieventsd.service to /usr/lib/systemd/system/atieventsd.service.
    - Afterwards, I blacklist the radeon module for it not to interfere with fglrx:
    Added "blacklist radeon" on the nano prompt below
    $ sudo nano /etc/modprobe.d/modprobe.conf
    - Then I generate the xorg.conf file, and get the output below with '# aticonfig --initial'
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "Accel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    BusID "PCI:1:5:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    - Finally I rebuild grub boot to do nomodeset in the kernel
    $ sudo nano /etc/default/grub && sudo grub-mkconfig -o /boot/grub/grub.cfg
    Generating grub configuration file ...
    Found background: /home/mario/Pictures/Wallpapers/974-arch-linux-1366x768-computer-wallpaper.png
    Found linux image: /boot/vmlinuz-linux
    Found initrd image: /boot/initramfs-linux.img
    Found fallback initramfs image: /boot/initramfs-linux-fallback.img
    done
    Then I reboot, only to get to a black screen after the initial dmesg outputs around 10 seconds on boot.
    $ journalctl -xe
    -- Logs begin at lun 2014-12-15 04:28:08 CST, end at mié 2015-01-07 23:07:22 CST. --
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Policy zone: Normal
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Aperture pointing to e820 RAM. Ignoring.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: console [tty0] enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: hpet clockevent registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Detected 2394.161 MHz processor
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.83 BogoMIPS (lpj=7980536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Security Framework initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... version: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... bit width: 48
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... generic registers: 4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4790.83 BogoMIPS)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RTC time: 5:05:23, date: 01/08/15
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt ro

    (EDIT: The outputs are incorrect. First post has them.)
    The output of Xorg last time I booted up with fglrx:
    $ cat /var/log/Xorg.0.log.old
    [ 18.657]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 18.657] X Protocol Version 11, Revision 0
    [ 18.657] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 18.657] Current Operating System: Linux HP425-Desktop-A-PC 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
    [ 18.657] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet
    [ 18.657] Build Date: 29 December 2014 01:09:58PM
    [ 18.657]
    [ 18.657] Current version of pixman: 0.32.6
    [ 18.657] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.657] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.657] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 6 17:29:00 2015
    [ 18.657] (==) Using config file: "/etc/X11/xorg.conf"
    [ 18.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 18.657] (==) ServerLayout "X.org Configured"
    [ 18.657] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 18.657] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 18.657] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 18.657] (**) |-->Input Device "Mouse0"
    [ 18.657] (**) |-->Input Device "Keyboard0"
    [ 18.657] (==) Automatically adding devices
    [ 18.657] (==) Automatically enabling devices
    [ 18.657] (==) Automatically adding GPU devices
    [ 18.657] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 18.657] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 18.657] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 18.657] (WW) Disabling Mouse0
    [ 18.657] (WW) Disabling Keyboard0
    [ 18.657] (II) Loader magic: 0x818d80
    [ 18.657] (II) Module ABI versions:
    [ 18.657] X.Org ANSI C Emulation: 0.4
    [ 18.657] X.Org Video Driver: 18.0
    [ 18.657] X.Org XInput driver : 21.0
    [ 18.657] X.Org Server Extension : 8.0
    [ 18.659] (EE) systemd-logind: failed to get session: PID 407 does not belong to any known session
    [ 18.659] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 18.660] (--) PCI:*(0:1:5:0) 1002:9712:103c:1475 rev 0, Mem @ 0xc0000000/268435456, 0xd4300000/65536, 0xd4200000/1048576, I/O @ 0x00005000/256
    [ 18.660] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 18.661] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 18.661] (II) LoadModule: "glx"
    [ 18.661] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 18.662] (II) Module glx: vendor="X.Org Foundation"
    [ 18.662] compiled for 1.16.3, module version = 1.0.0
    [ 18.662] ABI class: X.Org Server Extension, version 8.0
    [ 18.662] (==) AIGLX enabled
    [ 18.662] (II) LoadModule: "fglrx"
    [ 18.662] (WW) Warning, couldn't open module fglrx
    [ 18.662] (II) UnloadModule: "fglrx"
    [ 18.662] (II) Unloading fglrx
    [ 18.663] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [ 18.663] (EE) No drivers available.
    [ 18.663] (EE)
    Fatal server error:
    [ 18.663] (EE) no screens found(EE)
    [ 18.663] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 18.663] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 18.663] (EE)
    The output itself of journalctl -xe
    $ journalctl -xe
    -- Logs begin at Mon 2014-12-15 04:28:08 CST, end at Tue 2015-01-06 17:16:16 CST. --
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 3 base 000100000000 mask FFFFC0000000 write-back
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 6 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 7 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning 1 areas for low memory corruption
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using GB pages for direct mapping
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13fe00000-0x13fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13c000000-0x13fdfffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x100000000-0x13bffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x100000000-0x13bffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00100000-0x001fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00200000-0x3fffffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x40000000-0x7fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x80000000-0xaf7fffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xaf800000-0xaf9f0fff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xafbff000-0xafbfffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2e000, 0x01b2efff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RAMDISK: [mem 0x379a0000-0x37cc7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Early table checksum verification disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDP 0x00000000000F2A70 000014 (v00 HPQOEM)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDT 0x00000000AFBFE038 00003C (v01 HPQOEM SLIC-MPC 00000003 01000013)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACP 0x00000000AFBFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: DSDT 0x00000000AFBDE000 01B85D (v01 HPQOEM SB700 00000001 INTL 20060912)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACS 0x00000000AFB8F000 000040
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: APIC 0x00000000AFBFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: MCFG 0x00000000AFBFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SLIC 0x00000000AFBFA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET 0x00000000AFBDB000 000038 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SSDT 0x00000000AFBDA000 0001B7 (v01 AMD POWERNOW 00000001 AMD 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning NUMA topology in Northbridge 24
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: No NUMA configuration found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NODE_DATA [mem 0x13fffa000-0x13fffdfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Zone ranges:
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Movable zone start for each node
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Early memory node ranges
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00001000-0x0009efff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Policy zone: Normal
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0x5728000000-0x5729ffffff] (32MB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Aperture beyond 4GB. Ignoring.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: console [tty0] enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet clockevent registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Detected 2393.931 MHz processor
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=7979770)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Security Framework initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... version: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... bit width: 48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... generic registers: 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4789.35 BogoMIPS)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RTC time: 23:15:36, date: 01/06/15
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [APPR] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN0] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN1] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN2] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN3] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN4] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI host bridge to bus 0000:00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: Slot [1] registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: on NUMA node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: setting as boot device: PCI:0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: bridge control possible 0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using ACPI for IRQ routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xaf9f1000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: Initializing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: domain hash size = 128
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: unlabeled traffic allowed by default
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource hpet
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI init
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0400-0x04cf] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d6] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0680-0x06ff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x077a] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c00-0x0c01] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c14] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c50-0x0c52] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6c] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cd0-0x0cdb] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0220-0x0227] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0260-0x0273] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0800] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0804] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x087f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cdc-0x0cdf] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b00-0x0b0f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b20-0x0b3f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0200-0x027f] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:04: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI: found 5 devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0xd3200000-0xd321ffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: reno registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: CLS mismatch (64 != 32), using 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: Video device with shadowed ROM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Unpacking initramfs...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Disabling AGP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: aperture base @ a4000000 size 65536 KB
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: using GART IOMMU.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: CPU0: patch_level=0x010000c8
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 1 assigned for vector 0x400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IBS: LVT offset 1 assigned
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: perf: AMD IBS detected (0x0000001f)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning for low memory corruption every 60 seconds
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initialise system trusted keyring
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zpool: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zbud: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: VFS: Disk quotas dquot_6.5.2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: msgmni has been set to 7394
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Key type big_key registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler noop registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler deadline registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler cfq registered (default)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: mode is 1366x768x32, linelength=5504, pages=0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: scrolling: redraw
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: switching to colour frame buffer device 170x48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: fb0: VESA VGA frame buffer device
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: GHES: HEST is not enabled!
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet_acpi_add: no address or irqs in _CRS
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Linux agpgart interface v0.103
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: RTC can wake from S4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: cubic registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 10
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 17
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Loading compiled-in X.509 certificates
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: registered taskstats version 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Magic number: 15:578:301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tty tty30: hash matches
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: setting system clock to 2015-01-06 23:15:37 UTC (1420586137)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Hibernation image not present or could not be loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Write protecting the kernel read-only data: 8192k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: Detected active multiplexing controller, rev 1.1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type USB registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver usbfs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver hub
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SCSI subsystem initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new device driver usb
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci: OHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: QUIRK: Enable AMD PLL fix
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci: EHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: libata version 3.00 loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: version 3.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host0: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host1: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: 2 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 2-5: new high-speed USB device number 2 using ehci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Refined TSC clocksource calibration: 2394.005 MHz
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OCA1G, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 CA1G PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: ATAPI: hp DVDRAM GT30L, mP06, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP06 PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sda: sda1 sda2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 3-4: new full-speed USB device number 2 using ohci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource tsc
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: nonblocking pool is initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Sleep Button [SLPB]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Lid Switch [LID]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input:

  • Instalar AMD Catalyst legacy y normal

    this post lang is: es - spanish - Español
    Hola gente.
    Tengo una AMD Radeon HD 4870 y una AMD Radeon HD 5450.
    La primera entra en la categoria Legacy y la segunda en standart...
    Necesito usar ambas videocard como hago en Windows.
    Cómo puedo hacer para instalar ambas versiones de AMD Catalyst?
    al instalar una funciona todo bien, excelente, casi tan bien como en windows (un 70~80% de su potencial)
    con el open source driver osea 'radeon' tengo un rendimiento como del 10%-20% y muchos gliches graficos
    http://i53.tinypic.com/2rrxchv.png (not my pic)
    http://img.photobucket.com/albums/v284/ … litch2.jpg (not my pic)
    en windows si se puede...
    ayuda?
    Last edited by Cancer (2013-12-06 03:30:32)

    this post lang is: es - spanish - Español
    Hola gente.
    Tengo una AMD Radeon HD 4870 y una AMD Radeon HD 5450.
    La primera entra en la categoria Legacy y la segunda en standart...
    Necesito usar ambas videocard como hago en Windows.
    Cómo puedo hacer para instalar ambas versiones de AMD Catalyst?
    al instalar una funciona todo bien, excelente, casi tan bien como en windows (un 70~80% de su potencial)
    con el open source driver osea 'radeon' tengo un rendimiento como del 10%-20% y muchos gliches graficos
    http://i53.tinypic.com/2rrxchv.png (not my pic)
    http://img.photobucket.com/albums/v284/ … litch2.jpg (not my pic)
    en windows si se puede...
    ayuda?
    Last edited by Cancer (2013-12-06 03:30:32)

  • Compton, Openbox and Catalyst 14

    Hi.
    I'm new with Arch Linux, Openbox and Compton, so...
    I install compton and after that ATI driver... when I do that...the screen freeze and I can't see what I type/click, but if I kill the process (CTRL+ATL+F2, ps aux, kill -9...), everything is back again.
    I use the Vi0L0's catalyst, and the compton.conf you can see below.
    How can I fix that, for enable transparency, shadow and of course: Steam.
    # Backend
    # Backend to use: "xrender" or "glx".
    # GLX backend is typically much faster but depends on a sane driver.
    backend = "glx";
    # GLX backend
    glx-no-stencil = true;
    # GLX backend: Copy unmodified regions from front buffer instead of redrawing them all.
    # My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified,
    # but a 20% increase when only 1/4 is.
    # My tests on nouveau show terrible slowdown.
    # Useful with --glx-swap-method, as well.
    glx-copy-from-front = false;
    # GLX backend: Use MESA_copy_sub_buffer to do partial screen update.
    # My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated.
    # May break VSync and is not available on some drivers.
    # Overrides --glx-copy-from-front.
    # glx-use-copysubbuffermesa = true;
    # GLX backend: Avoid rebinding pixmap on window damage.
    # Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe).
    # Recommended if it works.
    # glx-no-rebind-pixmap = true;
    # GLX backend: GLX buffer swap method we assume.
    # Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).
    # undefined is the slowest and the safest, and the default value.
    # copy is fastest, but may fail on some drivers,
    # 2-6 are gradually slower but safer (6 is still faster than 0).
    # Usually, double buffer means 2, triple buffer means 3.
    # buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers.
    # Useless with --glx-use-copysubbuffermesa.
    # Partially breaks --resize-damage.
    # Defaults to undefined.
    glx-swap-method = "undefined";
    # Shadows
    # Enabled client-side shadows on windows.
    shadow = true;
    # Don't draw shadows on DND windows.
    no-dnd-shadow = true;
    # Avoid drawing shadows on dock/panel windows.
    no-dock-shadow = true;
    # Zero the part of the shadow's mask behind the window. Fix some weirdness with ARGB windows.
    clear-shadow = true;
    # The blur radius for shadows. (default 12)
    shadow-radius = 5;
    # The left offset for shadows. (default -15)
    shadow-offset-x = -5;
    # The top offset for shadows. (default -15)
    shadow-offset-y = -5;
    # The translucency for shadows. (default .75)
    shadow-opacity = 0.5;
    # Set if you want different colour shadows
    # shadow-red = 0.0;
    # shadow-green = 0.0;
    # shadow-blue = 0.0;
    # The shadow exclude options are helpful if you have shadows enabled. Due to the way compton draws its shadows, certain applications will have visual glitches
    # (most applications are fine, only apps that do weird things with xshapes or argb are affected).
    # This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher.
    shadow-exclude = [
    "! name~=''",
    "name = 'Notification'",
    "name = 'Plank'",
    "name = 'Docky'",
    "name = 'Kupfer'",
    "name = 'xfce4-notifyd'",
    "name *= 'VLC'",
    "name *= 'compton'",
    "name *= 'Chromium'",
    "name *= 'Chrome'",
    "name *= 'Firefox'",
    "class_g = 'Conky'",
    "class_g = 'Kupfer'",
    "class_g = 'Synapse'",
    "class_g ?= 'Notify-osd'",
    "class_g ?= 'Cairo-dock'",
    "class_g ?= 'Xfce4-notifyd'",
    "class_g ?= 'Xfce4-power-manager'"
    # Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners)
    shadow-ignore-shaped = false;
    # Opacity
    menu-opacity = 1;
    inactive-opacity = 1;
    active-opacity = 1;
    frame-opacity = 1;
    inactive-opacity-override = false;
    alpha-step = 0.06;
    # Dim inactive windows. (0.0 - 1.0)
    # inactive-dim = 0.2;
    # Do not let dimness adjust based on window opacity.
    # inactive-dim-fixed = true;
    # Blur background of transparent windows. Bad performance with X Render backend. GLX backend is preferred.
    # blur-background = true;
    # Blur background of opaque windows with transparent frames as well.
    # blur-background-frame = true;
    # Do not let blur radius adjust based on window opacity.
    blur-background-fixed = false;
    blur-background-exclude = [
    "window_type = 'dock'",
    "window_type = 'desktop'"
    # Fading
    # Fade windows during opacity changes.
    fading = true;
    # The time between steps in a fade in milliseconds. (default 10).
    fade-delta = 4;
    # Opacity change between steps while fading in. (default 0.028).
    fade-in-step = 0.03;
    # Opacity change between steps while fading out. (default 0.03).
    fade-out-step = 0.03;
    # Fade windows in/out when opening/closing
    # no-fading-openclose = true;
    # Specify a list of conditions of windows that should not be faded.
    fade-exclude = [ ];
    # Other
    # Try to detect WM windows and mark them as active.
    mark-wmwin-focused = true;
    # Mark all non-WM but override-redirect windows active (e.g. menus).
    mark-ovredir-focused = true;
    # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events.
    # Usually more reliable but depends on a EWMH-compliant WM.
    use-ewmh-active-win = true;
    # Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on.
    detect-rounded-corners = true;
    # Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows.
    # This prevents opacity being ignored for some apps.
    # For example without this enabled my xfce4-notifyd is 100% opacity no matter what.
    detect-client-opacity = true;
    # Specify refresh rate of the screen.
    # If not specified or 0, compton will try detecting this with X RandR extension.
    refresh-rate = 0;
    # Set VSync method. VSync methods currently available:
    # none: No VSync
    # drm: VSync with DRM_IOCTL_WAIT_VBLANK. May only work on some drivers.
    # opengl: Try to VSync with SGI_video_sync OpenGL extension. Only work on some drivers.
    # opengl-oml: Try to VSync with OML_sync_control OpenGL extension. Only work on some drivers.
    # opengl-swc: Try to VSync with SGI_swap_control OpenGL extension. Only work on some drivers. Works only with GLX backend. Known to be most effective on many drivers. Does not actually control paint timing, only buffer swap is affected, so it doesn’t have the effect of --sw-opti unlike other methods. Experimental.
    # opengl-mswc: Try to VSync with MESA_swap_control OpenGL extension. Basically the same as opengl-swc above, except the extension we use.
    # (Note some VSync methods may not be enabled at compile time.)
    vsync = "opengl-swc";
    # Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing.
    # Reported to have no effect, though.
    dbe = false;
    # Painting on X Composite overlay window. Recommended.
    paint-on-overlay = true;
    # Limit compton to repaint at most once every 1 / refresh_rate second to boost performance.
    # This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already,
    # unless you wish to specify a lower refresh rate than the actual value.
    sw-opti = false;
    # Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games.
    # Known to cause flickering when redirecting/unredirecting windows.
    # paint-on-overlay may make the flickering less obvious.
    unredir-if-possible = true;
    # Specify a list of conditions of windows that should always be considered focused.
    focus-exclude = [ ];
    # Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time.
    detect-transient = true;
    # Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time.
    # WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too.
    detect-client-leader = true;
    # Window type settings
    wintypes:
    tooltip =
    # fade: Fade the particular type of windows.
    fade = true;
    # shadow: Give those windows shadow
    shadow = false;
    # opacity: Default opacity for the type of windows.
    opacity = 0.85;
    # focus: Whether to always consider windows of this type focused.
    focus = true;
    Last edited by patrickmaciel (2014-07-26 22:07:58)

    emeres wrote:Just wanted to make sure. It is also the regular one, not catalyst legacy, right?
    I install that (from the arch wiki):
    Once you have added some Catalyst repository, update pacman's database and install these packages (see #Tools for more information):
    - catalyst-hook
    - catalyst-utils
    - catalyst-libgl
    - opencl-catalyst - optional, needed for OpenCL support
    - lib32-catalyst-utils - optional, needed for 32-bit OpenGL support on 64-bit systems
    - lib32-catalyst-libgl - optional, needed for 32-bit OpenGL support on 64-bit systems
    - lib32-opencl-catalyst - optional, needed for 32-bit OpenCL support on 64-bit systems
    So... after that I get:
    - Videos in browser (firefox/chrome/chromium) freeze in fullscreen
    - Resize windows is slowly
    - Teamviewer stop working
    - Record screen stop working
    - Sometimes I can't see what I'm typing... but after kill compton, everything appears
    I try using default compton.conf and "no" compton.conf... same problem.
    Sorry for my english
    Last edited by patrickmaciel (2014-07-27 01:56:54)

  • [SOLVED] Problem with FGLRX and Ati HD4650

    Hi! I'm fede1587 and I'm a new user of Archlinux (but not a new user of Linux). I love it and the KISS philosophy.
    Four days ago I intalled the new version of Arch but unfortunately I have a very big problem and after 4 days of work I have not been able to solve it.
    I have a Sony Vaio VGN-FW41J with a ATI HD4650. I need Ati proprietary drivers, because with the open source ones, the laptop become too hot. After installing the catalyst legacy pakages (234k, catalyst-utils and catalyst-hook) both from AUR and from the repository (following the great guide in ArchWiki) and configuring, when I lanunch startx, sometimes Gnome starts and sometimes I got black screen with horizontal lines.
    I'm searching for solutions from 4 days and I read a lot of topic, and I try a lot of things, but nothing!
    Accourding to the various threads, I have:
    1) Load the module fglrx
    2) Blacklist the radeon module
    3) Re-run mkinitcpio
    4) Run aticonfig --initial
    5) Run aticonfig --acpi-services=off
    6) Add nomodeset to grub
    After I tried to change kernel (thinking about some incompatibilities). I installed linux-lts, and I try with this kernel, but I have the same issue. I also try whit Bridge Linux, but nothing changed.
    This is the only output found in my error.log (Xorg.X.log is empty):
    Aug 26 02:36:51 localhost kernel: [   13.326922] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
    Aug 26 02:36:51 localhost kernel: [   13.326932] [fglrx:__create_mapping] *ERROR* Can not get virtual address
    Aug 26 02:36:51 localhost kernel: [   13.326935] [fglrx:__mc_heap_map_virtual_space] *ERROR* Failed to map the virtual space
    Aug 26 02:36:51 localhost kernel: [   13.326938] [fglrx:mc_heap_map_virtual_space] *ERROR* Can not get virtual address
    Aug 26 02:36:51 localhost kernel: [   13.326940] [fglrx:MCIL_GetVirtualAddressInDescriptor] *ERROR* Can not get the virtual address
    Aug 26 02:36:55 localhost kernel: [   16.622882] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
    Aug 26 02:36:55 localhost kernel: [   16.622892] [fglrx:__create_mapping] *ERROR* Can not get virtual address
    Aug 26 02:36:55 localhost kernel: [   16.622895] [fglrx:__mc_heap_map_virtual_space] *ERROR* Failed to map the virtual space
    Aug 26 02:36:55 localhost kernel: [   16.622898] [fglrx:mc_heap_map_virtual_space] *ERROR* Can not get virtual address
    Aug 26 02:36:55 localhost kernel: [   16.622900] [fglrx:MCIL_GetVirtualAddressInDescriptor] *ERROR* Can not get the virtual address
    Aug 26 02:36:55 localhost dhcpcd[529]: wlan0: sendmsg: Cannot assign requested address
    Aug 26 02:36:56 localhost kernel: [   18.364335] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
    Aug 26 02:36:56 localhost kernel: [   18.364346] [fglrx:__create_mapping] *ERROR* Can not get virtual address
    AuAug 26 02:40:18 localhost /usr/sbin/crond[452]: (CRON) INFO (Syslog will be used instead of sendmail.): File o directory non esistente
    Aug 26 02:40:25 localhost dhcpcd[476]: wlan0: sendmsg: Cannot assign requested address
    I hope you can help me, because I love this distro but I can't use it with the open source driver of the ATI card (too hot) :-(
    Thanks a lot for the help and sorry for my bad english.
    Last edited by fede1587 (2012-08-30 22:15:57)

    Hi. Now I found in my Xorg.0.log the following lines:
    [    16.893] (II) fglrx(0): [uki] DRM interface version 1.0
    [    16.893] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [    16.893] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x8000
    [    16.893] (II) fglrx(0): [uki] mapped SAREA 0x8000 to 0x7f82a04c9000
    [    16.893] (II) fglrx(0): [uki] framebuffer handle = 0x9000
    [    16.893] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [    16.893] (II) fglrx(0): swlDriScreenInit done
    [    16.893] (II) fglrx(0): Kernel Module Version Information:
    [    16.893] (II) fglrx(0):     Name: fglrx
    [    16.893] (II) fglrx(0):     Version: 8.97.2
    [    16.893] (II) fglrx(0):     Date: Jul  4 2012
    [    16.893] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    [    16.893] (II) fglrx(0): Kernel Module version matches driver.
    [    16.893] (II) fglrx(0): Kernel Module Build Time Information:
    [    16.893] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.4.9-1-ARCH
    [    16.893] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    [    16.893] (II) fglrx(0):     Build-Kernel __SMP__:            no
    [    16.893] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    [    16.893] (II) fglrx(0): [uki] register handle = 0x0000a000
    [    16.916] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
    [    16.916] (II) fglrx(0): Shutdown CMMQS
    [    16.916] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [    16.916] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x8000 at 0x7f82a04c9000
    [    16.916] (WW) fglrx(0): ***********************************************************
    [    16.916] (WW) fglrx(0): * DRI initialization failed                               *
    [    16.916] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
    [    16.916] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
    [    16.916] (WW) fglrx(0): ***********************************************************
    Do you have an idea of what it could be?
    Thanks a lot...

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Fglrx black screen on startx

    Hi,
    I installed archlinux on my mid-2010 21,5' iMac (with an ATI Radeon HD4670 inside) without any problems.
    Then I installed xorg from the xorg112 repo, and I installed catalyst-hd234k from AUR.
    Now when I try to launch X using startx, the screen stay black and nothing happend. I'm then forced to reboot.
    Here is my xorg.conf :
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Option "OpenGLOverlay" "0"
    Option "XAANNoOffscreenPixmaps" "false"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "800x600" "1920x1080"
    Virtual 1920 1080
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    And here is my Xorg.0.log :
    [ 1121.019]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 1121.026] X Protocol Version 11, Revision 0
    [ 1121.028] Build Operating System: Linux 3.8.10-1-ARCH x86_64
    [ 1121.030] Current Operating System: Linux iMac-de-Maxime 3.10.5-1-ARCH #1 SMP PREEMPT Mon Aug 5 08:04:22 CEST 2013 x86_64
    [ 1121.030] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d1d75c80-86cd-4ad7-b239-743534838a55 rw nomodeset quiet
    [ 1121.034] Build Date: 28 April 2013 06:27:40PM
    [ 1121.035]
    [ 1121.036] Current version of pixman: 0.30.2
    [ 1121.038] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1121.038] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1121.042] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 11 15:48:47 2013
    [ 1121.065] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1121.068] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1121.080] (==) ServerLayout "aticonfig Layout"
    [ 1121.080] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 1121.080] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 1121.080] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 1121.080] (==) Automatically adding devices
    [ 1121.080] (==) Automatically enabling devices
    [ 1121.100] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1121.100] Entry deleted from font path.
    [ 1121.123] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1121.123] Entry deleted from font path.
    [ 1121.123] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1121.123] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1121.123] Entry deleted from font path.
    [ 1121.123] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1121.123] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 1121.123] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1121.123] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 1121.123] (II) Loader magic: 0x7c7b00
    [ 1121.123] (II) Module ABI versions:
    [ 1121.123] X.Org ANSI C Emulation: 0.4
    [ 1121.123] X.Org Video Driver: 12.1
    [ 1121.123] X.Org XInput driver : 16.0
    [ 1121.123] X.Org Server Extension : 6.0
    [ 1121.124] (--) PCI:*(0:1:0:0) 1002:9488:106b:00b6 rev 0, Mem @ 0xc0000000/268435456, 0xd0420000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 1121.124] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 1121.124] (II) "extmod" will be loaded by default.
    [ 1121.124] (II) "dbe" will be loaded by default.
    [ 1121.125] (II) "glx" will be loaded by default.
    [ 1121.125] (II) "record" will be loaded by default.
    [ 1121.125] (II) "dri" will be loaded by default.
    [ 1121.125] (II) "dri2" will be loaded by default.
    [ 1121.125] (II) LoadModule: "extmod"
    [ 1121.135] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 1121.145] (II) Module extmod: vendor="X.Org Foundation"
    [ 1121.145] compiled for 1.12.4, module version = 1.0.0
    [ 1121.145] Module class: X.Org Server Extension
    [ 1121.145] ABI class: X.Org Server Extension, version 6.0
    [ 1121.145] (II) Loading extension MIT-SCREEN-SAVER
    [ 1121.145] (II) Loading extension XFree86-VidModeExtension
    [ 1121.145] (II) Loading extension XFree86-DGA
    [ 1121.145] (II) Loading extension DPMS
    [ 1121.145] (II) Loading extension XVideo
    [ 1121.145] (II) Loading extension XVideo-MotionCompensation
    [ 1121.145] (II) Loading extension X-Resource
    [ 1121.145] (II) LoadModule: "dbe"
    [ 1121.146] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 1121.146] (II) Module dbe: vendor="X.Org Foundation"
    [ 1121.146] compiled for 1.12.4, module version = 1.0.0
    [ 1121.146] Module class: X.Org Server Extension
    [ 1121.146] ABI class: X.Org Server Extension, version 6.0
    [ 1121.146] (II) Loading extension DOUBLE-BUFFER
    [ 1121.146] (II) LoadModule: "glx"
    [ 1121.146] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1121.162] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 1121.162] compiled for 6.9.0, module version = 1.0.0
    [ 1121.162] (II) Loading extension GLX
    [ 1121.162] (II) LoadModule: "record"
    [ 1121.162] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 1121.163] (II) Module record: vendor="X.Org Foundation"
    [ 1121.163] compiled for 1.12.4, module version = 1.13.0
    [ 1121.163] Module class: X.Org Server Extension
    [ 1121.163] ABI class: X.Org Server Extension, version 6.0
    [ 1121.163] (II) Loading extension RECORD
    [ 1121.163] (II) LoadModule: "dri"
    [ 1121.163] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 1121.179] (II) Module dri: vendor="X.Org Foundation"
    [ 1121.179] compiled for 1.12.4, module version = 1.0.0
    [ 1121.179] ABI class: X.Org Server Extension, version 6.0
    [ 1121.179] (II) Loading extension XFree86-DRI
    [ 1121.179] (II) LoadModule: "dri2"
    [ 1121.179] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 1121.180] (II) Module dri2: vendor="X.Org Foundation"
    [ 1121.180] compiled for 1.12.4, module version = 1.2.0
    [ 1121.180] ABI class: X.Org Server Extension, version 6.0
    [ 1121.180] (II) Loading extension DRI2
    [ 1121.180] (II) LoadModule: "fglrx"
    [ 1121.180] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 1121.388] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 1121.388] compiled for 1.4.99.906, module version = 8.97.2
    [ 1121.388] Module class: X.Org Video Driver
    [ 1121.389] (II) Loading sub module "fglrxdrm"
    [ 1121.389] (II) LoadModule: "fglrxdrm"
    [ 1121.389] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 1121.404] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 1121.404] compiled for 1.4.99.906, module version = 8.97.2
    [ 1121.404] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 1121.404] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7
    [ 1121.404] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
    [ 1121.404] (++) using VT number 1
    [ 1121.405] (WW) Falling back to old probe method for fglrx
    [ 1121.459] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 1121.473] (--) Chipset Supported AMD Graphics Processor (0x9488) found
    [ 1121.474] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 1121.476] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 1121.485] (II) AMD Video driver is signed
    [ 1121.486] (II) fglrx(0): pEnt->device->identifier=0xf77410
    [ 1121.486] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 1121.486] (II) Loading sub module "vgahw"
    [ 1121.486] (II) LoadModule: "vgahw"
    [ 1121.486] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 1121.498] (II) Module vgahw: vendor="X.Org Foundation"
    [ 1121.498] compiled for 1.12.4, module version = 0.1.0
    [ 1121.498] ABI class: X.Org Video Driver, version 12.1
    [ 1121.499] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 1121.499] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 1121.499] (==) fglrx(0): Default visual is TrueColor
    [ 1121.499] (**) fglrx(0): Option "OpenGLOverlay" "0"
    [ 1121.499] (**) fglrx(0): Option "DPMS" "true"
    [ 1121.499] (==) fglrx(0): RGB weight 888
    [ 1121.499] (II) fglrx(0): Using 8 bits per RGB
    [ 1121.499] (==) fglrx(0): Buffer Tiling is ON
    [ 1121.500] (II) Loading sub module "fglrxdrm"
    [ 1121.500] (II) LoadModule: "fglrxdrm"
    [ 1121.500] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 1121.500] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 1121.500] compiled for 1.4.99.906, module version = 8.97.2
    [ 1121.502] ukiDynamicMajor: found major device number 250
    [ 1121.502] ukiDynamicMajor: found major device number 250
    [ 1121.502] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 1121.502] ukiOpenDevice: node name is /dev/ati/card0
    [ 1121.502] ukiOpenDevice: open result is 11, (OK)
    [ 1121.502] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 1121.502] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 1121.502] (**) fglrx(0): NoAccel = NO
    [ 1121.502] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [ 1121.502] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4670" (Chipset = 0x9488)
    [ 1121.502] (--) fglrx(0): (PciSubVendor = 0x106b, PciSubDevice = 0x00b6)
    [ 1121.502] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [ 1121.502] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 1121.502] (--) fglrx(0): MMIO registers at 0xd0420000
    [ 1121.502] (--) fglrx(0): I/O port at 0x00002000
    [ 1121.502] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 1121.518] (II) fglrx(0): AC Adapter is used
    [ 1121.524] (EE) fglrx(0): V_BIOS address 0xd00 out of range
    [ 1121.524] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
    [ 1121.724] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [ 1121.724] (--) fglrx(0): Video RAM: 262144 kByte, Type: GDDR3
    [ 1121.724] (II) fglrx(0): PCIE card detected
    [ 1121.724] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 1121.724] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 1121.725] (II) fglrx(0): Using adapter: 1:0.0.
    [ 1121.757] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x10000000)
    [ 1121.808] (II) fglrx(0): Interrupt handler installed at IRQ 44.
    [ 1121.808] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 1121.808] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 1121.808] (==) fglrx(0): Center Mode is disabled
    [ 1121.808] (II) Loading sub module "fb"
    [ 1121.808] (II) LoadModule: "fb"
    [ 1121.808] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1121.816] (II) Module fb: vendor="X.Org Foundation"
    [ 1121.816] compiled for 1.12.4, module version = 1.0.0
    [ 1121.816] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1121.816] (II) Loading sub module "ddc"
    [ 1121.816] (II) LoadModule: "ddc"
    [ 1121.816] (II) Module "ddc" already built-in
    [ 1122.308] (II) fglrx(0): Finished Initialize PPLIB!
    [ 1122.327] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
    [ 1122.327] (II) fglrx(0): Output DFP1 has no monitor section
    [ 1122.327] (II) fglrx(0): Output CRT2 has no monitor section
    [ 1122.327] (II) Loading sub module "ddc"
    [ 1122.327] (II) LoadModule: "ddc"
    [ 1122.327] (II) Module "ddc" already built-in
    [ 1122.327] (II) fglrx(0): Connected Display0: LVDS
    [ 1122.327] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 1122.327] (II) fglrx(0): Manufacturer: APP Model: 9cde Serial#: 0
    [ 1122.327] (II) fglrx(0): Year: 2010 Week: 22
    [ 1122.327] (II) fglrx(0): EDID Version: 1.4
    [ 1122.327] (II) fglrx(0): Digital Display Input
    [ 1122.327] (II) fglrx(0): 8 bits per channel
    [ 1122.327] (II) fglrx(0): Digital interface is DisplayPort
    [ 1122.327] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 1122.327] (II) fglrx(0): Gamma: 2.20
    [ 1122.327] (II) fglrx(0): DPMS capabilities: Off
    [ 1122.327] (II) fglrx(0): Supported color encodings: RGB 4:4:4
    [ 1122.327] (II) fglrx(0): First detailed timing is preferred mode
    [ 1122.327] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 1122.327] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
    [ 1122.327] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
    [ 1122.327] (II) fglrx(0): Manufacturer's mask: 0
    [ 1122.327] (II) fglrx(0): Supported detailed timing:
    [ 1122.327] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
    [ 1122.327] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 1122.327] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 1122.327] (II) fglrx(0): Unknown vendor-specific block 2
    [ 1122.327] (II) fglrx(0): Monitor name: Color LCD
    [ 1122.327] (II) fglrx(0): EDID (in hex):
    [ 1122.327] (II) fglrx(0): 00ffffffffffff000610de9c00000000
    [ 1122.327] (II) fglrx(0): 16140104a5301b78226fb1a7554c9e25
    [ 1122.327] (II) fglrx(0): 0c505400000001010101010101010101
    [ 1122.327] (II) fglrx(0): 0101010101011a3680a070381f403020
    [ 1122.327] (II) fglrx(0): 3500db0b1100001a0000000201061001
    [ 1122.327] (II) fglrx(0): 0a010000000000000000000000fc0043
    [ 1122.327] (II) fglrx(0): 6f6c6f72204c43440a20202000000000
    [ 1122.327] (II) fglrx(0): 00000000000000000000000000000048
    [ 1122.327] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 1122.355] (II) fglrx(0): EDID for output LVDS
    [ 1122.355] (II) fglrx(0): Manufacturer: APP Model: 9cde Serial#: 0
    [ 1122.355] (II) fglrx(0): Year: 2010 Week: 22
    [ 1122.355] (II) fglrx(0): EDID Version: 1.4
    [ 1122.355] (II) fglrx(0): Digital Display Input
    [ 1122.355] (II) fglrx(0): 8 bits per channel
    [ 1122.355] (II) fglrx(0): Digital interface is DisplayPort
    [ 1122.355] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 1122.355] (II) fglrx(0): Gamma: 2.20
    [ 1122.355] (II) fglrx(0): DPMS capabilities: Off
    [ 1122.355] (II) fglrx(0): Supported color encodings: RGB 4:4:4
    [ 1122.355] (II) fglrx(0): First detailed timing is preferred mode
    [ 1122.355] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 1122.355] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
    [ 1122.355] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
    [ 1122.355] (II) fglrx(0): Manufacturer's mask: 0
    [ 1122.355] (II) fglrx(0): Supported detailed timing:
    [ 1122.355] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
    [ 1122.355] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 1122.355] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 1122.355] (II) fglrx(0): Unknown vendor-specific block 2
    [ 1122.355] (II) fglrx(0): Monitor name: Color LCD
    [ 1122.355] (II) fglrx(0): EDID (in hex):
    [ 1122.355] (II) fglrx(0): 00ffffffffffff000610de9c00000000
    [ 1122.355] (II) fglrx(0): 16140104a5301b78226fb1a7554c9e25
    [ 1122.355] (II) fglrx(0): 0c505400000001010101010101010101
    [ 1122.355] (II) fglrx(0): 0101010101011a3680a070381f403020
    [ 1122.355] (II) fglrx(0): 3500db0b1100001a0000000201061001
    [ 1122.355] (II) fglrx(0): 0a010000000000000000000000fc0043
    [ 1122.355] (II) fglrx(0): 6f6c6f72204c43440a20202000000000
    [ 1122.355] (II) fglrx(0): 00000000000000000000000000000048
    [ 1122.355] (II) fglrx(0): EDID vendor "APP", prod id 40158
    [ 1122.355] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 1122.355] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 1122.355] (II) fglrx(0): No remaining probed modes for output LVDS
    [ 1122.355] (II) fglrx(0): EDID for output DFP1
    [ 1122.355] (II) fglrx(0): EDID for output CRT2
    [ 1122.355] (II) fglrx(0): Output LVDS connected
    [ 1122.355] (II) fglrx(0): Output DFP1 disconnected
    [ 1122.355] (II) fglrx(0): Output CRT2 disconnected
    [ 1122.355] (WW) fglrx(0): Unable to find initial modes
    [ 1122.355] (EE) fglrx(0): Output LVDS enabled but has no modes
    [ 1122.355] (EE) fglrx(0): Display Infrastructure Failed
    [ 1122.355] (EE) fglrx(0): PreInit failed
    [ 1122.355] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === end
    [ 1122.359] (II) fglrx(0): Interrupt handler Shutdown.
    [ 1122.359] (II) UnloadModule: "fglrx"
    [ 1122.359] (II) UnloadSubModule: "fb"
    [ 1122.359] (II) Unloading fb
    [ 1122.359] (II) UnloadSubModule: "fglrxdrm"
    [ 1122.359] (II) Unloading fglrxdrm
    [ 1122.359] (II) UnloadSubModule: "vgahw"
    [ 1122.359] (II) Unloading vgahw
    [ 1122.359] (II) UnloadSubModule: "fglrxdrm"
    [ 1122.359] (EE) Screen(s) found, but none have a usable configuration.
    [ 1122.359]
    Fatal server error:
    [ 1122.360] no screens found
    [ 1122.360]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 1122.360] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 1122.360]
    [ 1122.384] Server terminated with error (1). Closing log file.
    I disabled KMS by setting nomodeset in my grub conf.
    Thanks in advance !
    (PS : I'm really sorry for my bad english, it's not my native language.)

    I have a Radeon HD4870 (identical to your card for most purposes besides performance).  The reason for my move to Arch was Ubuntu's decision to shoot anyone who doesn't use the latest cards, so here is how I get it running on Arch:
    yaourt -Qs '(catalyst|radeon|hd234)'
    catalyst-hd234k/catalyst-hook 13.1-14
    AMD/ATI legacy drivers. Auto re-compile fglrx module while shutdown/reboot. Now with Angela - The Slayer Of The Daemons ;P
    catalyst-hd234k/catalyst-utils 13.1-2
    AMD/ATI Catalyst legacy drivers utilities and libraries with OpenCL implementation
    catalyst-hd234k/lib32-catalyst-utils 13.1-2 (lib32)
    AMD/ATI catalyst legacy driver utilities and libraries. (32-bit)
    catalyst-hd234k/xvba-video 0.7.8-4
    AMDs XvBA backend for VA-API, hardware video acceleration on RadeonHD cards
    uname -r
    3.0.90-1-lts
    cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "0-DFP1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1200"
    Option "TargetRefresh" "60"
    Option "Position" "0 720"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP2"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "1920 0"
    Option "Rotate" "right"
    Option "Disable" "false"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "Monitor-DFP1" "0-DFP1"
    Option "Monitor-DFP2" "0-DFP2"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-1"
    Driver "fglrx"
    Option "Monitor-DFP2" "0-DFP2"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Virtual 3000 1920
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-1"
    Device "aticonfig-Device[0]-1"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Dual 1200/1080 monitors, fullscreen video works, counterstrike works, starcraft 2 works astonishingly smoothly.
    Are there any config files I could send you to help out?  Btw, I didn't bother with nomodeset.
    Last edited by windows_me (2013-08-14 11:25:56)

  • StartX Failing With ATI Proprietary Drivers

    I have installed the catalyst legacy drivers, but cannot figure out why they are not working.
    My log from xorg:
    [ 2142.903]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 2142.903] X Protocol Version 11, Revision 0
    [ 2142.903] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 2142.903] Current Operating System: Linux arch 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 2142.903] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=82506866-1d99-427a-abf7-4cfa641b7c26 ro quiet nomodeset
    [ 2142.903] Build Date: 27 August 2012 08:04:39AM
    [ 2142.903]
    [ 2142.903] Current version of pixman: 0.28.2
    [ 2142.903] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2142.903] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2142.903] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 8 10:50:35 2013
    [ 2142.903] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2142.903] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2142.903] (==) ServerLayout "aticonfig Layout"
    [ 2142.903] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2142.903] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2142.903] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2142.903] (==) Automatically adding devices
    [ 2142.903] (==) Automatically enabling devices
    [ 2142.903] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2142.903] Entry deleted from font path.
    [ 2142.903] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2142.903] Entry deleted from font path.
    [ 2142.903] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2142.903] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2142.903] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2142.903] (II) Loader magic: 0x7c8b00
    [ 2142.903] (II) Module ABI versions:
    [ 2142.903] X.Org ANSI C Emulation: 0.4
    [ 2142.903] X.Org Video Driver: 12.1
    [ 2142.903] X.Org XInput driver : 16.0
    [ 2142.903] X.Org Server Extension : 6.0
    [ 2142.904] (--) PCI:*(0:2:0:0) 1002:9488:106b:00b6 rev 0, Mem @ 0xc0000000/268435456, 0xd0220000/65536, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
    [ 2142.904] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2142.904] (II) "extmod" will be loaded by default.
    [ 2142.904] (II) "dbe" will be loaded by default.
    [ 2142.904] (II) "glx" will be loaded by default.
    [ 2142.904] (II) "record" will be loaded by default.
    [ 2142.904] (II) "dri" will be loaded by default.
    [ 2142.904] (II) "dri2" will be loaded by default.
    [ 2142.904] (II) LoadModule: "extmod"
    [ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2142.905] (II) Module extmod: vendor="X.Org Foundation"
    [ 2142.905] compiled for 1.12.4, module version = 1.0.0
    [ 2142.905] Module class: X.Org Server Extension
    [ 2142.905] ABI class: X.Org Server Extension, version 6.0
    [ 2142.905] (II) Loading extension MIT-SCREEN-SAVER
    [ 2142.905] (II) Loading extension XFree86-VidModeExtension
    [ 2142.905] (II) Loading extension XFree86-DGA
    [ 2142.905] (II) Loading extension DPMS
    [ 2142.905] (II) Loading extension XVideo
    [ 2142.905] (II) Loading extension XVideo-MotionCompensation
    [ 2142.905] (II) Loading extension X-Resource
    [ 2142.905] (II) LoadModule: "dbe"
    [ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2142.905] (II) Module dbe: vendor="X.Org Foundation"
    [ 2142.905] compiled for 1.12.4, module version = 1.0.0
    [ 2142.905] Module class: X.Org Server Extension
    [ 2142.905] ABI class: X.Org Server Extension, version 6.0
    [ 2142.905] (II) Loading extension DOUBLE-BUFFER
    [ 2142.905] (II) LoadModule: "glx"
    [ 2142.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2142.905] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2142.905] compiled for 6.9.0, module version = 1.0.0
    [ 2142.905] (II) Loading extension GLX
    [ 2142.905] (II) LoadModule: "record"
    [ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2142.906] (II) Module record: vendor="X.Org Foundation"
    [ 2142.906] compiled for 1.12.4, module version = 1.13.0
    [ 2142.906] Module class: X.Org Server Extension
    [ 2142.906] ABI class: X.Org Server Extension, version 6.0
    [ 2142.906] (II) Loading extension RECORD
    [ 2142.906] (II) LoadModule: "dri"
    [ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2142.906] (II) Module dri: vendor="X.Org Foundation"
    [ 2142.906] compiled for 1.12.4, module version = 1.0.0
    [ 2142.906] ABI class: X.Org Server Extension, version 6.0
    [ 2142.906] (II) Loading extension XFree86-DRI
    [ 2142.906] (II) LoadModule: "dri2"
    [ 2142.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2142.906] (II) Module dri2: vendor="X.Org Foundation"
    [ 2142.906] compiled for 1.12.4, module version = 1.2.0
    [ 2142.906] ABI class: X.Org Server Extension, version 6.0
    [ 2142.906] (II) Loading extension DRI2
    [ 2142.906] (II) LoadModule: "fglrx"
    [ 2142.906] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2142.920] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 2142.920] compiled for 1.4.99.906, module version = 8.97.2
    [ 2142.920] Module class: X.Org Video Driver
    [ 2142.921] (II) Loading sub module "fglrxdrm"
    [ 2142.921] (II) LoadModule: "fglrxdrm"
    [ 2142.921] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2142.921] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 2142.921] compiled for 1.4.99.906, module version = 8.97.2
    [ 2142.921] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 2142.921] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7
    [ 2142.921] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
    [ 2142.921] (--) using VT number 2
    [ 2142.925] (WW) Falling back to old probe method for fglrx
    [ 2142.928] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 2142.929] (--) Chipset Supported AMD Graphics Processor (0x9488) found
    [ 2142.929] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
    [ 2142.930] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 2142.930] (II) AMD Video driver is signed
    [ 2142.930] (II) fglrx(0): pEnt->device->identifier=0x93e4a0
    [ 2142.930] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 2142.930] (II) Loading sub module "vgahw"
    [ 2142.930] (II) LoadModule: "vgahw"
    [ 2142.931] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2142.931] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2142.931] compiled for 1.12.4, module version = 0.1.0
    [ 2142.931] ABI class: X.Org Video Driver, version 12.1
    [ 2142.931] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2142.931] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2142.931] (==) fglrx(0): Default visual is TrueColor
    [ 2142.931] (**) fglrx(0): Option "DPMS" "true"
    [ 2142.931] (==) fglrx(0): RGB weight 888
    [ 2142.931] (II) fglrx(0): Using 8 bits per RGB
    [ 2142.931] (==) fglrx(0): Buffer Tiling is ON
    [ 2142.931] (II) Loading sub module "fglrxdrm"
    [ 2142.931] (II) LoadModule: "fglrxdrm"
    [ 2142.931] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2142.931] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 2142.931] compiled for 1.4.99.906, module version = 8.97.2
    [ 2142.932] ukiDynamicMajor: found major device number 250
    [ 2142.932] ukiDynamicMajor: found major device number 250
    [ 2142.932] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2142.932] ukiOpenDevice: node name is /dev/ati/card0
    [ 2142.932] ukiOpenDevice: open result is 11, (OK)
    [ 2142.932] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2142.932] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2142.933] (**) fglrx(0): NoAccel = NO
    [ 2142.933] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [ 2142.933] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4670" (Chipset = 0x9488)
    [ 2142.933] (--) fglrx(0): (PciSubVendor = 0x106b, PciSubDevice = 0x00b6)
    [ 2142.933] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [ 2142.933] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 2142.933] (--) fglrx(0): MMIO registers at 0xd0220000
    [ 2142.933] (--) fglrx(0): I/O port at 0x00001000
    [ 2142.933] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2142.933] (II) fglrx(0): AC Adapter is used
    [ 2142.940] (EE) fglrx(0): V_BIOS address 0xd00 out of range
    [ 2142.940] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
    [ 2143.157] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [ 2143.157] (--) fglrx(0): Video RAM: 262144 kByte, Type: GDDR3
    [ 2143.157] (II) fglrx(0): PCIE card detected
    [ 2143.157] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2143.157] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2143.158] (II) fglrx(0): Using adapter: 2:0.0.
    [ 2143.257] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x10000000)
    [ 2143.271] (II) fglrx(0): Interrupt handler installed at IRQ 46.
    [ 2143.271] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2143.271] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2143.271] (==) fglrx(0): Center Mode is disabled
    [ 2143.271] (II) Loading sub module "fb"
    [ 2143.271] (II) LoadModule: "fb"
    [ 2143.271] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2143.272] (II) Module fb: vendor="X.Org Foundation"
    [ 2143.272] compiled for 1.12.4, module version = 1.0.0
    [ 2143.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2143.272] (II) Loading sub module "ddc"
    [ 2143.272] (II) LoadModule: "ddc"
    [ 2143.272] (II) Module "ddc" already built-in
    [ 2143.423] (II) fglrx(0): Finished Initialize PPLIB!
    [ 2143.428] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
    [ 2143.428] (II) fglrx(0): Output DFP1 has no monitor section
    [ 2143.428] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2143.428] (II) fglrx(0): Output CRT2 has no monitor section
    [ 2143.428] (II) Loading sub module "ddc"
    [ 2143.428] (II) LoadModule: "ddc"
    [ 2143.428] (II) Module "ddc" already built-in
    [ 2143.428] (II) fglrx(0): Connected Display0: LVDS
    [ 2143.428] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2143.428] (II) fglrx(0): Manufacturer: APP Model: 9cbc Serial#: 16843009
    [ 2143.428] (II) fglrx(0): Year: 2009 Week: 26
    [ 2143.428] (II) fglrx(0): EDID Version: 1.4
    [ 2143.428] (II) fglrx(0): Digital Display Input
    [ 2143.428] (II) fglrx(0): 8 bits per channel
    [ 2143.428] (II) fglrx(0): Digital interface is undefined
    [ 2143.428] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 2143.428] (II) fglrx(0): Gamma: 2.20
    [ 2143.428] (II) fglrx(0): DPMS capabilities: Off
    [ 2143.428] (II) fglrx(0): Supported color encodings: RGB 4:4:4
    [ 2143.428] (II) fglrx(0): Default color space is primary color space
    [ 2143.428] (II) fglrx(0): First detailed timing is preferred mode
    [ 2143.428] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 2143.428] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
    [ 2143.428] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
    [ 2143.428] (II) fglrx(0): Supported established timings:
    [ 2143.428] (II) fglrx(0): Manufacturer's mask: 10
    [ 2143.428] (II) fglrx(0): Supported detailed timing:
    [ 2143.428] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
    [ 2143.428] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 2143.428] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 2143.428] (II) fglrx(0): Unknown vendor-specific block 1
    [ 2143.428] (II) fglrx(0): LM215WF3-SLA1
    [ 2143.428] (II) fglrx(0): Monitor name: Color LCD
    [ 2143.428] (II) fglrx(0): EDID (in hex):
    [ 2143.428] (II) fglrx(0): 00ffffffffffff000610bc9c01010101
    [ 2143.428] (II) fglrx(0): 1a130104a0301b78266fb1a7554c9e25
    [ 2143.428] (II) fglrx(0): 0c505400001001010101010101010101
    [ 2143.428] (II) fglrx(0): 0101010101011a3680a070381f403020
    [ 2143.428] (II) fglrx(0): 3500db0b1100001a0000000100061030
    [ 2143.428] (II) fglrx(0): 11000000000000000a20000000fe004c
    [ 2143.428] (II) fglrx(0): 4d3231355746332d534c4131000000fc
    [ 2143.428] (II) fglrx(0): 00436f6c6f72204c43440a20202000ba
    [ 2143.428] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2143.455] (II) fglrx(0): EDID for output LVDS
    [ 2143.455] (II) fglrx(0): Manufacturer: APP Model: 9cbc Serial#: 16843009
    [ 2143.455] (II) fglrx(0): Year: 2009 Week: 26
    [ 2143.455] (II) fglrx(0): EDID Version: 1.4
    [ 2143.455] (II) fglrx(0): Digital Display Input
    [ 2143.455] (II) fglrx(0): 8 bits per channel
    [ 2143.455] (II) fglrx(0): Digital interface is undefined
    [ 2143.455] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 2143.455] (II) fglrx(0): Gamma: 2.20
    [ 2143.455] (II) fglrx(0): DPMS capabilities: Off
    [ 2143.455] (II) fglrx(0): Supported color encodings: RGB 4:4:4
    [ 2143.455] (II) fglrx(0): Default color space is primary color space
    [ 2143.455] (II) fglrx(0): First detailed timing is preferred mode
    [ 2143.455] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
    [ 2143.455] (II) fglrx(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
    [ 2143.455] (II) fglrx(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
    [ 2143.455] (II) fglrx(0): Supported established timings:
    [ 2143.455] (II) fglrx(0): Manufacturer's mask: 10
    [ 2143.455] (II) fglrx(0): Supported detailed timing:
    [ 2143.455] (II) fglrx(0): clock: 138.5 MHz Image Size: 475 x 267 mm
    [ 2143.455] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 2143.455] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 2143.455] (II) fglrx(0): Unknown vendor-specific block 1
    [ 2143.455] (II) fglrx(0): LM215WF3-SLA1
    [ 2143.455] (II) fglrx(0): Monitor name: Color LCD
    [ 2143.455] (II) fglrx(0): EDID (in hex):
    [ 2143.455] (II) fglrx(0): 00ffffffffffff000610bc9c01010101
    [ 2143.455] (II) fglrx(0): 1a130104a0301b78266fb1a7554c9e25
    [ 2143.455] (II) fglrx(0): 0c505400001001010101010101010101
    [ 2143.455] (II) fglrx(0): 0101010101011a3680a070381f403020
    [ 2143.455] (II) fglrx(0): 3500db0b1100001a0000000100061030
    [ 2143.455] (II) fglrx(0): 11000000000000000a20000000fe004c
    [ 2143.455] (II) fglrx(0): 4d3231355746332d534c4131000000fc
    [ 2143.455] (II) fglrx(0): 00436f6c6f72204c43440a20202000ba
    [ 2143.455] (II) fglrx(0): EDID vendor "APP", prod id 40124
    [ 2143.455] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 2143.455] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 2143.455] (II) fglrx(0): Printing probed modes for output LVDS
    [ 2143.455] (II) fglrx(0): Modeline "1400x1050"x60.0 108.00 1400 1444 1556 1684 1050 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1444 1556 1684 1024 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1444 1556 1684 960 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1444 1556 1684 800 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1444 1556 1684 864 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1444 1556 1684 768 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1444 1556 1684 720 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1024x768"x60.0 108.00 1024 1444 1556 1684 768 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "1024x600"x60.0 108.00 1024 1444 1556 1684 600 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "800x600"x60.0 108.00 800 1444 1556 1684 600 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "800x480"x60.0 108.00 800 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "720x480"x60.0 108.00 720 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): Modeline "640x480"x60.0 108.00 640 1444 1556 1684 480 1051 1054 1066 +hsync +vsync (64.1 kHz)
    [ 2143.455] (II) fglrx(0): EDID for output DFP1
    [ 2143.455] (II) fglrx(0): EDID for output DFP2
    [ 2143.455] (II) fglrx(0): EDID for output CRT2
    [ 2143.455] (II) fglrx(0): Output LVDS connected
    [ 2143.455] (II) fglrx(0): Output DFP1 disconnected
    [ 2143.455] (II) fglrx(0): Output DFP2 disconnected
    [ 2143.455] (II) fglrx(0): Output CRT2 disconnected
    [ 2143.455] (II) fglrx(0): Using exact sizes for initial modes
    [ 2143.455] (II) fglrx(0): Output LVDS using initial mode 1400x1050
    [ 2143.455] (II) fglrx(0): Display dimensions: (480, 270) mm
    [ 2143.455] (II) fglrx(0): DPI set to (74, 98)
    [ 2143.455] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4670 has 2 configurable heads and 1 displays connected.
    [ 2143.455] (==) fglrx(0): PseudoColor visuals disabled
    [ 2143.455] (II) Loading sub module "ramdac"
    [ 2143.455] (II) LoadModule: "ramdac"
    [ 2143.455] (II) Module "ramdac" already built-in
    [ 2143.455] (==) fglrx(0): NoDRI = NO
    [ 2143.455] (==) fglrx(0): Capabilities: 0x00000000
    [ 2143.455] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2143.455] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2143.455] (==) fglrx(0): UseFastTLS=0
    [ 2143.455] (==) fglrx(0): BlockSignalsOnLock=1
    [ 2143.455] (--) Depth 24 pixmap format is 32 bpp
    [ 2143.456] (II) Loading extension ATIFGLRXDRI
    [ 2143.456] (II) fglrx(0): doing swlDriScreenInit
    [ 2143.456] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2143.456] ukiDynamicMajor: found major device number 250
    [ 2143.456] ukiDynamicMajor: found major device number 250
    [ 2143.456] ukiDynamicMajor: found major device number 250
    [ 2143.456] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2143.456] ukiOpenDevice: node name is /dev/ati/card0
    [ 2143.456] ukiOpenDevice: open result is 12, (OK)
    [ 2143.456] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 2143.456] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2143.456] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2143.456] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
    [ 2143.456] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x26000
    [ 2143.456] (II) fglrx(0): [uki] mapped SAREA 0x26000 to 0x7f222ea1b000
    [ 2143.456] (II) fglrx(0): [uki] framebuffer handle = 0x27000
    [ 2143.456] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2143.456] (II) fglrx(0): swlDriScreenInit done
    [ 2143.456] (II) fglrx(0): Kernel Module Version Information:
    [ 2143.456] (II) fglrx(0): Name: fglrx
    [ 2143.456] (II) fglrx(0): Version: 8.97.2
    [ 2143.456] (II) fglrx(0): Date: Nov 16 2012
    [ 2143.456] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    [ 2143.456] (II) fglrx(0): Kernel Module version matches driver.
    [ 2143.456] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2143.456] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.7.10-1-ARCH
    [ 2143.456] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 2143.456] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 2143.456] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2143.456] (II) fglrx(0): [uki] register handle = 0x00028000
    [ 2143.475] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
    [ 2143.475] (II) fglrx(0): Shutdown CMMQS
    [ 2143.475] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [ 2143.475] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x26000 at 0x7f222ea1b000
    [ 2143.475] (WW) fglrx(0): ***********************************************************
    [ 2143.475] (WW) fglrx(0): * DRI initialization failed *
    [ 2143.475] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
    [ 2143.475] (WW) fglrx(0): * 2D and 3D acceleration disabled *
    [ 2143.475] (WW) fglrx(0): ***********************************************************
    [ 2143.475]
    Fatal server error:
    [ 2143.475] AddScreen/ScreenInit failed for driver 0
    [ 2143.475]
    [ 2143.475]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2143.475] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2143.475]
    [ 2143.498] Server terminated with error (1). Closing log file.

    [  2143.475] (WW) fglrx(0): ***********************************************************
    [  2143.475] (WW) fglrx(0): * DRI initialization failed                               *
    [  2143.475] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
    [  2143.475] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
    [  2143.475] (WW) fglrx(0): ***********************************************************
    Have you gone over this section of the wiki and made sure everything is done? Are you using the legacy driver? If so how did you install it, and from where?
    Last edited by Kilz (2013-03-09 13:01:00)

  • [SOLVED] TF2 (Team Fortress 2) glitchy during gameplay

    Check out this awesome glitchy video
    Any ideas on why this is happening?
    Thanks! I don't think I got it installed in time for the penguin :-(
    EDIT, because I forgot to list information:
    Video card:
    05:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Radeon HD 4350]
    Video Driver:
    xf86-video-ati
    Desktop:
    XFCE4
    If you would like to know anything else, let me know!
    Last edited by uberscientist (2013-03-02 03:59:26)

    Dear god... I just spent the last hour trying to install the catalyst-legacy driver.
    I need to write a full tutorial sometime maybe, but this is important:
    pacman -Rns $(pacman -Qsq xf86-video)
    #will remove every open source video driver installed
    We don't want to follow the wiki because it's outdated, instead of installing the "catalyst" package, we want to use "catalyst-hook" (or catalyst-daemon I suppose).
    This is because of licensing issues with AMD or something?
    Then we run this to make the xorg.conf contain ATI stuff:
    sudo aticonfig --initial
    So, I was able to reboot and everything seemed to load fine, however when I try to start TF2 I now get:
    And I got rid of that by installing lib32-catalyst-utils, whew!
    TF2 is working fine now!
    Last edited by uberscientist (2013-03-02 03:07:36)

  • [SOLVED] Gnome 3.8 apps crash with X Window System Error

    So far this applications are affected:
    - gnome-terminal (when clicking on menu)
    - gnome-control-center (when choosing Users or Date & Time and some other tiles, choosing account in GOA)
    - epiphany (when clicking on new tab button)
    They crash with following error in console:
    (gnome-control-center:12717): Gdk-ERROR **: The program 'gnome-control-center' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadImplementation (server does not implement operation)'.
    (Details: serial 3583 error_code 17 request_code 148 minor_code 46)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error() function.)
    dmesg show only this line:
    [14505.289265] traps: gnome-control-c[12717] trap int3 ip:7fc494139ead sp:7fff3986e5e0 error:0
    Running with gdb:
    Program received signal SIGTRAP, Trace/breakpoint trap.
    0x00007ffff13caead in g_logv () from /usr/lib/libglib-2.0.so.0
    (gdb) backtrace
    #0 0x00007ffff13caead in g_logv () from /usr/lib/libglib-2.0.so.0
    #1 0x00007ffff13cb092 in g_log () from /usr/lib/libglib-2.0.so.0
    #2 0x00007ffff2825e60 in ?? () from /usr/lib/libgdk-3.so.0
    #3 0x00007ffff2830801 in ?? () from /usr/lib/libgdk-3.so.0
    #4 0x00007ffff5332976 in _XError () from /usr/lib/libX11.so.6
    #5 0x00007ffff532fbc1 in ?? () from /usr/lib/libX11.so.6
    #6 0x00007ffff532fc05 in ?? () from /usr/lib/libX11.so.6
    #7 0x00007ffff5330495 in _XEventsQueued () from /usr/lib/libX11.so.6
    #8 0x00007ffff5332f28 in _XData32 () from /usr/lib/libX11.so.6
    #9 0x00007ffff530d46e in XChangeProperty () from /usr/lib/libX11.so.6
    #10 0x00007ffff283bcfb in ?? () from /usr/lib/libgdk-3.so.0
    #11 0x00007ffff2d4609c in ?? () from /usr/lib/libgtk-3.so.0
    #12 0x00007ffff2d4a8ca in gtk_window_set_icon_name () from /usr/lib/libgtk-3.so.0
    #13 0x000000000044ba23 in ?? ()
    #14 0x00007fffe3358eb8 in ffi_call_unix64 () from /usr/lib/libffi.so.6
    #15 0x00007fffe3358820 in ffi_call () from /usr/lib/libffi.so.6
    #16 0x00007ffff168ac98 in g_cclosure_marshal_generic () from /usr/lib/libgobject-2.0.so.0
    #17 0x00007ffff168a458 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
    #18 0x00007ffff169b40d in ?? () from /usr/lib/libgobject-2.0.so.0
    #19 0x00007ffff16a3219 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
    #20 0x00007ffff16a3462 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
    #21 0x000000000044d3bc in ?? ()
    #22 0x00007ffff168d2b0 in g_cclosure_marshal_VOID__BOXEDv () from /usr/lib/libgobject-2.0.so.0
    #23 0x00007ffff168a687 in ?? () from /usr/lib/libgobject-2.0.so.0
    #24 0x00007ffff16a2778 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
    #25 0x00007ffff16a3462 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
    #26 0x00007ffff2bf293c in ?? () from /usr/lib/libgtk-3.so.0
    My graphic card (iI guess this has something to do with xorg):
    AMD Mobility Radeon HD 4550 (using catalyst legacy driver 13.1 with Xorg 1.12)
    Last edited by szorti (2013-04-24 08:40:26)

    I did a little test:
    - upgraded to xorg 1.14
    - switched from catalyst to xf86-video-ati drive
    Most of the errors dissappeared (GOA still crashes).
    But now i can only see message tray using keyboard shortcut (super + m). I read that I need to move my mouse fast to the botton edge of my screen - does not work - instead it show up randomly when i moved mouse near the bottom edge.
    I don't want to use the open source drivers (slow and laggy with multi monitor setup I'm using). I hope gnome devs will fix this bugs soon.
    SOLUTION (to still use catalyst):
    I found out that this is an Xorg 1.12 bug.
    Bug: http://lists.debian.org/debian-x/2012/12/msg00133.html
    To solve this use patch from this bugreport to compile xorg 1.12
    I used this aur packages:
    1. https://aur.archlinux.org/packages/xf86 … evdev1.12/
    2. https://aur.archlinux.org/packages/xorg-server1.12/ - I have edited PKGBUILD to include patch from bug report above
    PKGBUILD and patch:
    https://gist.github.com/winglot/5450630
    Last edited by szorti (2013-04-24 08:40:10)

  • *Solved* Question about ATI Drivers

    Ok, I'm just finished installing, and I know most distro's, ask you to remove the open source drivers, before adding in FGLRX  drivers.  Looking at the wiki, I didn't noticed if this needed to be done, and after going through the install, I rebooted.  It went as planned until kdm went to load.  The screen was unreadable.  I used the cd media to mount root, and removed catalyst, and re-installed the opensource drivers.  All is well atm, so I'm trying to figure out what I missed.  My question atm though is during the FGLRX install, it ask's if you want to removed the opensource drivers due to conflict.  If I hit yes, will pacman it automatically remove the required drivers, or do I need to manually remove the Fx86 drivers on my own?
    I do apologize for not having a /etc/X11/xorg.conf report, as it slipped my mind while fixing everything. I'll try to make a better habbit of getting it made. I did do a aticonig --inital before the reboot, so i know it won't that.
    If I missed anything on the wiki, please let me know, I'll look again at it after dinner.
    Thank you all for  your time in the matter.
    Last edited by bigcountryva (2012-09-30 01:01:49)

    Silex89 wrote:
    Hi there
    First off, which installation method are you following? (ABS using the AUR package, the unofficial repository or the AMD installer). Depending on which method you use, you'll have (or not) a resolved dependency. For instance, you have to remove both the open source driver and your former xorg.conf file (safer is to back it up) to be able to install Catalyst with the AMD's site installer.
    If you use AUR (with a tool like Yaourt for example) or the repo method, pacman/yaourt should do it for you, but in a lot of cases it doesn't (I switched to Catalyst having my OpenBox session built already, so when I tried to remove the open source driver it complained about all of the apps that I had installed for removing a dependency like libgl or mesa) and you'll have to do a pacman -Rdd xf86-video-ati to make it work
    I'm wondering if you remembered to add the mkinitcpio hook (which is needed to make Catalyst work).
    What I would suggest is to re-read the wiki page for Catalyst, see if your card is still supported by Catalyst, maybe your card needs Catalyst-Legacy...
    Best of Luck with that
    I figured it out, and got it working.  I had a typo adding the module for flgxr driver.  Fixed it and a soft boot later, all is well.  I also deicided to make it so I have to "startx" into my gui, incase this happens again, I won't need the installation media.  Thanks for the input.

  • Video drivers installation on Mobility HD4200.

    Hello!
    I'm trying to install catalyst-legacy from AUR and installation fails because of dependency xorg-server<1.13.0. But problem still occur when i install xorg-server1.12 from AUR. Any idea how to fix it?
    Last edited by zuberuber (2013-01-30 18:27:03)

    Hi
    Normally you can get all drivers on the Toshiba website and it seems that your model supports XP:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Furthermore on this page check the installation instructions document. This is a list for the recommended driver installation order.

  • [Help request] Installing legacy 12.6 catalyst driver

    I have installed xf86-video-ati and lib32-ati-dri packages, system starts, but I need to improve performance of 3D games and some KDE effects.
    After installing catalyst package, setting nomodeset for kernel and blacklisting radeon, X isn't starting, probably because one of my graphics card (integrated HD4250) is no longer supported in latest releases. Last version that was working was 12.6 and catalyst owns >12.10 already.
    I would try myself, but I must rely on your knowledge, because getting X working back after such failure is painfull to fix, had to do it before .

    You have to downgrade to Xorg 1.12 by adding
    [xorg112]
    Server = http://catalyst.apocalypsus.net/repo/xorg112/$arch
    above all other repositories in your /etc/pacman.conf.
    Then run pacman -Syuu (double u does the downgrading)
    and add the [catalyst-hd234k] repository as described in the wiki.

  • [SOLVED] Catalyst 12.6 legacy and Awesome 3.5 (official repo)

    Hi,
    I have a readeon HD 2600 and I'm swaping from free drivers to ati's one.
    I post here because I have an issue with awesome. It's actualy the same glitch as in this thread (https://bbs.archlinux.org/viewtopic.php?id=147680). It appear when i'm resizing a window and also with tilling.
    Do you think it's a bug in awesome? Something else?
    Nb : I tryed "yaourt -S awesome34" and with this old version, everything is right (except my rc.lua file, of course ). I can stay some time with this old buid but it won't be a good solution on the long term.
    Last edited by Zenol (2013-01-09 16:11:45)

    I'm a bit confuse that I just solved this problem by unactivating compositing as explained in this wiki page : https://wiki.archlinux.org/index.php/Xo … _extension. I think this can help other archlinux users that also want to play games with a old ati card
    Last edited by Zenol (2013-01-09 16:09:27)

  • [AMD Catalyst] problem with "major" file

    Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
    I followed all the steps of the wiki, but when I "startx", it display:
    ukiDynamicMajor = failed to open /proc/ati/major
    I would precise that the command "modprobe fglrx"  says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
    What I have done:
    pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
    pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
    modprobe fglrx (doesn't work)
    touch /etc/modules-load.d/catalyst.conf (the file already exist)
    less /etc/modules-load.d/catalyst.conf ("fglrx")
    touch /etc/X11/xorg-conf.d/20-catalyst.conf
    nano /etc/X11/xorg-conf.d/20-catalyst.conf
    [quote]
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "ATI Technologies Inc"
    BusID "PCI:1:00:1"
    EndSection
    [/quote]
    rnmod radeon (doesn't work => rnmod is not a valid program)
    touch /etc/modprobe.d/radeon_blacklist (sucessful)
    echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
    Config:
    uname -a
    Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
    lspci
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
    00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
    00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
    00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
    00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
    01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
    dmesg 
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.3 present.
    [    0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CAFFF write-protect
    [    0.000000]   CB000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 0D0000000 mask FF8000000 write-combining
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
    [    0.000000]  [mem 0x1f800000-0x1fbfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
    [    0.000000]  [mem 0x18000000-0x1f7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x17ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
    [    0.000000]  [mem 0x1fc00000-0x1ffeffff] page 4k
    [    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
    [    0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 1fff0000 000040
    [    0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 511MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1fff0000
    [    0.000000]   low ram: 0 - 1fff0000
    [    0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x1ffeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
    [    0.000000]   node   0: [mem 0x00100000-0x1ffeffff]
    [    0.000000] On node 0 totalpages: 130958
    [    0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
    [    0.000000]   Normal zone: 992 pages used for memmap
    [    0.000000]   Normal zone: 126960 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [    0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
    [    0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129934
    [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 1048440 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
    [    0.000000] virtual kernel memory layout:
        fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
        lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
          .init : 0xc160f000 - 0xc169d000   ( 568 kB)
          .data : 0xc1457c92 - 0xc160eb40   (1755 kB)
          .text : 0xc1000000 - 0xc1457c92   (4447 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:2304 nr_irqs:512 16
    [    0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2625.859 MHz processor
    [    0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
    [    0.003360] pid_max: default: 32768 minimum: 301
    [    0.003378] ACPI: Core revision 20131218
    [    0.008679] ACPI: All ACPI Tables successfully acquired
    [    0.010020] Security Framework initialized
    [    0.010032] Yama: becoming mindful.
    [    0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010456] Initializing cgroup subsys memory
    [    0.010473] Initializing cgroup subsys devices
    [    0.010478] Initializing cgroup subsys freezer
    [    0.010482] Initializing cgroup subsys net_cls
    [    0.010485] Initializing cgroup subsys blkio
    [    0.010546] CPU0: Hyper-Threading is disabled
    [    0.010555] mce: CPU supports 4 MCE banks
    [    0.010568] CPU0: Thermal monitoring enabled (TM1)
    [    0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
    tlb_flushall_shift: 6
    [    0.018898] ftrace: allocating 18912 entries in 37 pages
    [    0.026857] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
    [    0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [    0.063333] ... version:                0
    [    0.063333] ... bit width:              40
    [    0.063333] ... generic registers:      18
    [    0.063333] ... value mask:             000000ffffffffff
    [    0.063333] ... max period:             0000007fffffffff
    [    0.063333] ... fixed-purpose events:   0
    [    0.063333] ... event mask:             000000000003ffff
    [    0.076710] x86: Booted up 1 node, 1 CPUs
    [    0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
    [    0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.077427] devtmpfs: initialized
    [    0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
    [    0.079963] pinctrl core: initialized pinctrl subsystem
    [    0.080103] RTC time: 16:19:41, date: 05/12/14
    [    0.080222] NET: Registered protocol family 16
    [    0.080459] cpuidle: using governor ladder
    [    0.080464] cpuidle: using governor menu
    [    0.080574] ACPI: bus type PCI registered
    [    0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
    [    0.092335] PCI: Using configuration type 1 for base access
    [    0.093965] bio: create slab <bio-0> at 0
    [    0.094273] ACPI: Added _OSI(Module Device)
    [    0.094279] ACPI: Added _OSI(Processor Device)
    [    0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.094286] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.098161] ACPI: Interpreter enabled
    [    0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [    0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [    0.098216] ACPI: (supports S0 S3 S4 S5)
    [    0.098220] ACPI: Using IOAPIC for interrupt routing
    [    0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.098438] ACPI: No dock devices found.
    [    0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
    [    0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    [    0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [    0.108371] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
    [    0.108378] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
    [    0.108381] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
    [    0.108385] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
    [    0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
    [    0.108397] PCI: root bus 00: using default resources
    [    0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.108726] PCI host bridge to bus 0000:00
    [    0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.108741] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
    [    0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
    [    0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
    [    0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
    [    0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
    [    0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
    [    0.109507] pci 0000:00:02.1: reg 0x20: [io  0x1400-0x141f]
    [    0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
    [    0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
    [    0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.109811] pci 0000:00:02.3: supports D1 D2
    [    0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
    [    0.110085] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
    [    0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
    [    0.110311] pci 0000:00:02.6: reg 0x10: [io  0xd000-0xd0ff]
    [    0.110325] pci 0000:00:02.6: reg 0x14: [io  0xd400-0xd47f]
    [    0.110410] pci 0000:00:02.6: supports D1 D2
    [    0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
    [    0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
    [    0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
    [    0.110631] pci 0000:00:02.7: reg 0x10: [io  0xd800-0xd8ff]
    [    0.110645] pci 0000:00:02.7: reg 0x14: [io  0xdc00-0xdc7f]
    [    0.110730] pci 0000:00:02.7: supports D1 D2
    [    0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
    [    0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
    [    0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
    [    0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
    [    0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
    [    0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
    [    0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
    [    0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
    [    0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
    [    0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
    [    0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
    [    0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
    [    0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
    [    0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
    [    0.112070] pci 0000:00:0f.0: reg 0x10: [io  0xe000-0xe0ff]
    [    0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
    [    0.112169] pci 0000:00:0f.0: supports D1 D2
    [    0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
    [    0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
    [    0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
    [    0.112476] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc0ff]
    [    0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
    [    0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.112565] pci 0000:01:00.0: supports D1 D2
    [    0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
    [    0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
    [    0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
    [    0.112764] pci 0000:01:00.1: supports D1 D2
    [    0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.112896] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.112904] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.112910] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.112924] pci_bus 0000:00: on NUMA node 0
    [    0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
    [    0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.115209] vgaarb: loaded
    [    0.115211] vgaarb: bridge control possible 0000:01:00.0
    [    0.115301] PCI: Using ACPI for IRQ routing
    [    0.115309] PCI: pci_cache_line_size set to 64 bytes
    [    0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [    0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
    [    0.115616] NetLabel: Initializing
    [    0.115622] NetLabel:  domain hash size = 128
    [    0.115624] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.115655] NetLabel:  unlabeled traffic allowed by default
    [    0.115740] Switched to clocksource refined-jiffies
    [    0.129136] pnp: PnP ACPI init
    [    0.129177] ACPI: bus type PNP registered
    [    0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.130147] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.130157] system 00:01: [io  0x0290-0x029f] has been reserved
    [    0.130162] system 00:01: [io  0x0800-0x0805] has been reserved
    [    0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.130207] pnp 00:02: [dma 4]
    [    0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.130910] pnp 00:06: [dma 2]
    [    0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132675] pnp 00:09: [dma 3]
    [    0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [    0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.133074] pnp: PnP ACPI: found 11 devices
    [    0.133080] ACPI: bus type PNP unregistered
    [    0.174911] Switched to clocksource acpi_pm
    [    0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
    [    0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
    [    0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.174975] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.174983] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.174989] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.174999] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.175007] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
    [    0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
    [    0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
    [    0.175076] NET: Registered protocol family 2
    [    0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.175477] TCP: Hash tables configured (established 4096 bind 4096)
    [    0.175521] TCP: reno registered
    [    0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175688] NET: Registered protocol family 1
    [    0.397112] pci 0000:01:00.0: Boot video device
    [    0.397124] PCI: CLS 32 bytes, default 64
    [    0.397238] Unpacking initramfs...
    [    0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
    [    0.517809] apm: BIOS not found.
    [    0.517886] Scanning for low memory corruption every 60 seconds
    [    0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.536896] zbud: loaded
    [    0.537090] VFS: Disk quotas dquot_6.5.2
    [    0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.537623] msgmni has been set to 996
    [    0.537789] Key type big_key registered
    [    0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    0.538390] io scheduler noop registered
    [    0.538397] io scheduler deadline registered
    [    0.538493] io scheduler cfq registered (default)
    [    0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [    0.538866] vesafb: scrolling: redraw
    [    0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [    0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
    [    0.646493] Console: switching to colour frame buffer device 160x64
    [    0.753177] fb0: VESA VGA frame buffer device
    [    0.753268] GHES: HEST is not enabled!
    [    0.753308] isapnp: Scanning for PnP cards...
    [    1.066034] isapnp: No Plug & Play device found
    [    1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [    1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [    1.108786] rtc_cmos 00:03: RTC can wake from S4
    [    1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
    [    1.109177] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.109384] TCP: cubic registered
    [    1.109696] NET: Registered protocol family 10
    [    1.110235] NET: Registered protocol family 17
    [    1.110539] Using IPI No-Shortcut mode
    [    1.110887] registered taskstats version 1
    [    1.111374]   Magic number: 14:861:337
    [    1.111396] tty tty58: hash matches
    [    1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
    [    1.111561] PM: Hibernation image not present or could not be loaded.
    [    1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
    [    1.112374] Write protecting the kernel text: 4448k
    [    1.112407] Write protecting the kernel read-only data: 1284k
    [    1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [    1.140455] systemd-udevd[40]: starting version 212
    [    1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.249861] Floppy drive(s): fd0 is 1.44M
    [    1.263944] FDC 0 is a post-1991 82077
    [    1.295454] SCSI subsystem initialized
    [    1.312358] ACPI: bus type USB registered
    [    1.312456] usbcore: registered new interface driver usbfs
    [    1.312497] usbcore: registered new interface driver hub
    [    1.316781] usbcore: registered new device driver usb
    [    1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.318313] ehci-pci: EHCI PCI platform driver
    [    1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.319680] ohci-pci: OHCI PCI platform driver
    [    1.327015] libata version 3.00 loaded.
    [    1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
    [    1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
    [    1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
    [    1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
    [    1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
    [    1.373943] hub 1-0:1.0: USB hub found
    [    1.373981] hub 1-0:1.0: 6 ports detected
    [    1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
    [    1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
    [    1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
    [    1.429251] hub 2-0:1.0: USB hub found
    [    1.429296] hub 2-0:1.0: 2 ports detected
    [    1.429636] pata_sis 0000:00:02.5: version 0.5.2
    [    1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
    [    1.437030] scsi0 : pata_sis
    [    1.443413] scsi1 : pata_sis
    [    1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
    [    1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
    [    1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
    [    1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.499191] hub 3-0:1.0: USB hub found
    [    1.499232] hub 3-0:1.0: 2 ports detected
    [    1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
    [    1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
    [    1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
    [    1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
    [    1.552850] hub 4-0:1.0: USB hub found
    [    1.552893] hub 4-0:1.0: 2 ports detected
    [    1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
    [    1.603796] ata1.00: 160086528 sectors, multi 16: LBA
    [    1.617092] ata1.00: configured for UDMA/133
    [    1.617362] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
    [    1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [    1.861345] hub 1-4:1.0: USB hub found
    [    1.861759] hub 1-4:1.0: 4 ports detected
    [    1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
    [    1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
    [    1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
    [    1.920261] ata2.00: configured for UDMA/66
    [    1.933596] ata2.01: configured for UDMA/33
    [    1.942307] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
    [    1.943253] scsi 1:0:1:0: CD-ROM            LITE-ON  DVD+RW LDW-401S  E9S3 PQ: 0 ANSI: 5
    [    1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
    [    1.968905] sd 0:0:0:0: [sda] Write Protect is off
    [    1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
    [    1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [    1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
    [    2.009048]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
    [    2.345412] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.358710] usbcore: registered new interface driver usbhid
    [    2.358717] usbhid: USB HID core driver
    [    2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
    [    2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
    [    2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
    [    2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
    [    2.500774] scsi2 : usb-storage 1-4.4:1.0
    [    2.502128] usbcore: registered new interface driver usb-storage
    [    2.520155] Switched to clocksource tsc
    [    3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [    3.505428] scsi 2:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
    [    3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
    [    3.508020] sd 2:0:0:0: [sdb] Write Protect is off
    [    3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.513361] random: nonblocking pool is initialized
    [    3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.517301]  sdb: sdb1 sdb2
    [    3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [    3.929099] systemd[1]: Detected architecture 'x86'.
    [    3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
    [    5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [    5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [    5.175707] systemd[1]: Starting Remote File Systems.
    [    5.175758] systemd[1]: Reached target Remote File Systems.
    [    5.175820] systemd[1]: Starting Encrypted Volumes.
    [    5.175867] systemd[1]: Reached target Encrypted Volumes.
    [    5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [    5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [    5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [    5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [    5.176555] systemd[1]: Starting Swap.
    [    5.176602] systemd[1]: Reached target Swap.
    [    5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
    [    5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
    [    5.176850] systemd[1]: Starting Root Slice.
    [    5.208364] systemd[1]: Created slice Root Slice.
    [    5.208422] systemd[1]: Starting User and Session Slice.
    [    5.209187] systemd[1]: Created slice User and Session Slice.
    [    5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [    5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [    5.209451] systemd[1]: Starting Delayed Shutdown Socket.
    [    5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
    [    5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [    5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [    5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
    [    5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
    [    5.209982] systemd[1]: Starting udev Kernel Socket.
    [    5.210180] systemd[1]: Listening on udev Kernel Socket.
    [    5.210249] systemd[1]: Starting udev Control Socket.
    [    5.210366] systemd[1]: Listening on udev Control Socket.
    [    5.210428] systemd[1]: Starting Journal Socket.
    [    5.210621] systemd[1]: Listening on Journal Socket.
    [    5.210717] systemd[1]: Starting System Slice.
    [    5.211489] systemd[1]: Created slice System Slice.
    [    5.211583] systemd[1]: Started File System Check on Root Device.
    [    5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [    5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [    5.212459] systemd[1]: Mounting Temporary Directory...
    [    5.239615] systemd[1]: Starting system-getty.slice.
    [    5.240697] systemd[1]: Created slice system-getty.slice.
    [    5.240838] systemd[1]: Mounting Debug File System...
    [    5.279740] systemd[1]: Started Load Kernel Modules.
    [    5.296122] systemd[1]: Starting Apply Kernel Variables...
    [    5.297870] systemd[1]: Starting Setup Virtual Console...
    [    5.299634] systemd[1]: Mounting POSIX Message Queue File System...
    [    5.301446] systemd[1]: Mounting Configuration File System...
    [    5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    5.346155] systemd[1]: Mounted FUSE Control File System.
    [    5.346271] systemd[1]: Mounting Huge Pages File System...
    [    5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
    [    5.372655] systemd[1]: Starting udev Coldplug all Devices...
    [    5.374485] systemd[1]: Starting Journal Service...
    [    5.376393] systemd[1]: Started Journal Service.
    [    5.926924] systemd-udevd[120]: starting version 212
    [    6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [    7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [    7.438167] ACPI: Power Button [PWRB]
    [    7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    7.438360] ACPI: Power Button [PWRF]
    [    7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    7.625549] parport_pc 00:09: reported by Plug and Play ACPI
    [    7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [    7.658989] Linux agpgart interface v0.103
    [    7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
    [    7.809304] [drm] Initialized drm 1.1.0 20060810
    [    7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [    7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    [    7.980566] mousedev: PS/2 mouse device common for all mice
    [    7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
    [    7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
    [    7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
    [    8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    [    8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [    8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
    [    8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [    8.279526] [drm] radeon kernel modesetting enabled.
    [    8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
    [    8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [    8.279680] Console: switching to colour dummy device 80x25
    [    8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
    [    8.302015] [drm] register mmio base: 0xE9000000
    [    8.302018] [drm] register mmio size: 65536
    [    8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
    [    8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
    [    8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
    [    8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
    [    8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
    [    8.313711] [drm] Generation 2 PCI interface, using max accessible memory
    [    8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
    [    8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
    [    8.313746] [drm] RAM width 64bits DDR
    [    8.318743] [TTM] Zone  kernel: Available graphics memory: 255446 kiB
    [    8.318750] [TTM] Initializing pool allocator
    [    8.318762] [TTM] Initializing DMA pool allocator
    [    8.318815] [drm] radeon: 128M of VRAM memory ready
    [    8.318821] [drm] radeon: 128M of GTT memory ready.
    [    8.321257] radeon 0000:01:00.0: WB disabled
    [    8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
    [    8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    8.321278] [drm] Driver supports precise vblank timestamp query.
    [    8.321311] [drm] radeon: irq initialized.
    [    8.321340] [drm] Loading R200 Microcode
    [    8.337126] ppdev: user-space parallel port driver
    [    8.350382] [drm] radeon: ring at 0x00000000D0001000
    [    8.350414] [drm] ring test succeeded in 1 usecs
    [    8.350728] [drm] ib test succeeded in 0 usecs
    [    8.351298] [drm] Radeon Display Connectors
    [    8.351305] [drm] Connector 0:
    [    8.351307] [drm]   VGA-1
    [    8.351311] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [    8.351313] [drm]   Encoders:
    [    8.351315] [drm]     CRT1: INTERNAL_DAC1
    [    8.351317] [drm] Connector 1:
    [    8.351319] [drm]   SVIDEO-1
    [    8.351321] [drm]   Encoders:
    [    8.351322] [drm]     TV1: INTERNAL_DAC2
    [    8.481905] [drm] fb mappable at 0xD8040000
    [    8.481912] [drm] vram apper at 0xD8000000
    [    8.481914] [drm] size 8294400
    [    8.481916] [drm] fb depth is 24
    [    8.481918] [drm]    pitch is 7680
    [    8.482299] fbcon: radeondrmfb (fb0) is primary device
    [    8.535240] Console: switching to colour frame buffer device 240x67
    [    8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
    [    8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [    8.614034] radeon 0000:01:00.0: registered panic notifier
    [    8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
    [    9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
    [    9.523383] intel8x0: clocking to 48000
    [   10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
    [   11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
    [  130.919975] ISO 9660 Extensions: RRIP_1991A
    [ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    [ 2771.015182] systemd[1]: Starting Journal Service...
    [ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
    [ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
    [ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    [ 2773.922423] systemd[1]: Stopping Journal Service...
    [ 2773.922521] systemd[1]: Starting Journal Service...
    [ 2773.924633] systemd[1]: Started Journal Service.
    [ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
    [ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
    [ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 2932.591064] Disabling lock debugging due to kernel taint
    [ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
    The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
    My aim is to install Catalyst
    Thank you for your help

    I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

Maybe you are looking for