Catalyst won't install also floppy not mounted with 2008.04 new ISOs

For some reason or another the latest realeased Iso after (Don't Panic) the one that came out recently 2008.04 in May I cannot set up my floppy even though I identitfied it right and catalyst won't install I did pacman -Syu to install the files it required but it wouldn't complete the transaction due to some conflicting files. I'll show you what I mean.
This is my floppy line in fstab that was right on in the Don't Panic release:
/dev/fd0 /media/floppy vfat defaults,user,noauto,unhide 0 0
This is what happens under new realease
[krazybastid@krazy89709874976 ~]$ mount /media/floppy
mount: special device /dev/fd0 does not exist
[krazybastid@krazy89709874976 ~]$
So I try to install catalyst:
[krazybastid@krazy89709874976 ~]$ sudo pacman -S catalyst
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
:: atl2: requires kernel26<2.6.25
:: ipw3945: requires kernel26<=2.6.25-0
:: madwifi: requires kernel26<=2.6.25-0
:: ndiswrapper: requires kernel26<=2.6.25-0
:: rt2500: requires kernel26<=2.6.25-0
:: tiacx: requires kernel26<2.6.25
:: wlan-ng26: requires kernel26<=2.6.25-0
[krazybastid@krazy89709874976 ~]$
So I try pacman -Syu
[krazybastid@krazy89709874976 ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets: rsync-3.0.2-1 abs-2.1-1 pam-1.0.1-1 coreutils-6.11-1
mkinitcpio-0.5.19-1 kernel26-2.6.25.4-1 atl2-2.0.4-3 m4-1.4.11-1
autoconf-2.62-1 bzip2-1.0.5-2 dialog-1.1_20080316-3 file-4.24-1
gpm-1.20.3-1 initscripts-2008.05-1 ipw3945-1.2.2-10
run-parts-2.28.6-2 ca-certificates-20080514-3 openssl-0.9.8h-3
libldap-2.3.40-1 libtool-2.2.4-1 licenses-2.4-1 links-2.1pre36-1
lvm2-2.02.36-1 madwifi-0.9.4.3382-5 ndiswrapper-1.52-4
openssh-5.0p1-1 pango-1.20.3-1 patch-2.5.9-1 pcre-7.7-1
pkgconfig-0.23-1 rt2500-1.1.0_B4-23 syslog-ng-2.0.9-1 tar-1.20-2
texinfo-4.12-2 tiacx-20080210-5 wget-1.11.2-1 wlan-ng26-0.2.8-17
Total Download Size: 0.00 MB
Total Installed Size: 115.06 MB
Proceed with installation? [Y/n] y
checking package integrity...
(37/37) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
gpm: /usr/lib/libgpm.so.1 exists in filesystem
Errors occurred, no packages were upgraded.
[krazybastid@krazy89709874976 ~]$
Well I'm stuck is there a way out of this cause I can't even use the (Don't Panic) CD now without running into more update problems.

Greetings. While trying to upgrade I got the following error
$sudo pacman -Syuf
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: ipw3945: requires kernel26<=2.6.25-0
pl help.
Note: with lspci | grep Wireless I noted that my wireless is intel PRO 2200 chip set. and in the modules ipw2200 was there for loading. I could not figure out why ipw3945 hinters the upgrade problem. I removed ipw3945 with sudo pacman --remove ipw3945 and removed the ignorepkg in rc.conf. made a try with pacman -Syu for a system upgrade operation.
After a completion of about 360 MB of updates down load it failed to update the system. It is late night. I decided to give a try with yaourt. This time with yaourt -Syf sytem got updated.
Last edited by kgas (2008-11-11 23:21:59)

Similar Messages

Applications will not launch and install disk will not mount

Just recently my applications have taken a turn to not wanting to launch. These include anything from Dashboard to the Microsoft Office Suite. It also includes anything that is downloaded form the internet, like the World of Warcraft download client. Long story short, the errors that I constantly get are
System/Library/Frameworks/ApplicationServices.Framework/versions/A/Frameworks/Co reGraphics.Framework/versions/A/CoreGraphics
I figured that with it being a system library issue and the Repair Disk Permissions has been completely useless, that a complete restore would be in order. And I was wrong. For some reason my Genuine 13-inch MacBook Pro Mac OS X Install DVD will not mount. Meaning I out the DVD in said drive and it will attempt to mount but will eventually give up and eject itself. I can load any other cd/DVD into my drive and it will mount without a problem.
Everything is up to date software wise.
About my mac:
2009 MacBook Pro Unibody
Apple OS X 10.6.8
Processor: 2.53 GHz Intel
Memory: 4GB 1067 MHZ DDR3
Apps that won't open due to System/Library/Frameworks/ApplicationServices.Framework/versions/A/Frameworks/C oreGraphics.Framework/versions/A/CoreGraphics
Dashboard                            (OS based)
Finale NotePad 2008.           (Downloaded from Internet)
iTunes.                                  (OS based/internet)
Google Earth.                       (Internet)
Microsoft Word.                    (Student Disk Download)
Safari (more less, it has it's moments of working)
Plus probably more but I think you may get the idea.

Check the disk for scratches and wipe it with a lint free cloth.
CD/DVD Loading Problems
CD/DVD Sharing
CD/DVD Drive - Troubleshooting
CD/DVD Drive - Troubleshooting (2)

CS5.5 Indesign upgrade won't install "update is not applicable" error

Upgraded to Yosemite, reinstalled legit CS5 InDesign successfully, need to download the upgrade to 5.5 for essential "shared content" plug in... the update won't install "update is not applicable" error w no serial code request, just doesn't install. Indesign 5.0 was working fine, i just need a couple extensions

you can update cs5: http://www.adobe.com/downloads/updates/
but you can't upgrade to cs5.5.
you can upgrade to cs6 or cc (for money).

Downloading Yosemite and now have message saying "Wi-fi: no hardware installed" Also do not have a wi-fi icon on system preferences menu.

installed download of Yosemite and now have message saying "Wi-fi: no hardware installed" Also do not have a wi-fi icon on system preferences menu.

Is it in your applications folder (look in UTILITIES)?
If not, reinstall the OSX.
Ciao.

ORA-27054: NFS not mounted with proper option

I was trying to take RMAN backup from RHEL 5 for a database residing on fedora 13
but the NFS share is getting me the following error
ORA-19504: failed to create file "/backup/weekly/1qmp0vv3_1_1"
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
Additional information: 3
thanx

Here the 10gR2 doc link
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/app_nas.htm#sthref976
Otherwise, as already suggested, there're a numbers of notes in Metalink you should look at, it could really be a bug which may require an upgrade (10.2.0.1 is out of date anyway).
Nicolas.
Too late, but glad you fixed it, thanks for your feedback.
Edited by: N Gasparotto on Oct 13, 2011 1:36 PM

ORA-27054: NFS file system where the file is created or resides is not mounted with correct options

Hi,
i am getting following error, while taking RMAN backup.
ORA-01580: error creating control backup file /backup/snapcf_TST.f
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
DB Version:10.2.0.4.0
while taking datafiles i am not getting any errors , i am using same mount points for both (data&control files)

[oracle@localhost dbs]$ oerr ora 27054
27054, 00000, "NFS file system where the file is created or resides is not mounted with correct options"
// *Cause: The file was on an NFS partition and either reading the mount tab
//          file failed or the partition wass not mounted with the correct
//          mount option.
// *Action: Make sure mount tab file has read access for Oracle user and
//          the NFS partition where the file resides is mounted correctly.
//          For the list of mount options to use refer to your platform
//          specific documentation.

Maxtor OneTouch III does not mount with Firewire

My Maxtor OneTouch III does not mount with Firewire.
I changed both cables, and ports on the drive to try with my 400 port on the MacBook Pro.
The drive will start up, the light will flash, remain steady, flash again. And then just as the Mac finishes booting, the light turns off and it does not mount.
It works just fine with a USB cable. But I bought it so it could be used as a firewire drive.
Other firewire drives work.

Hi Judy,
Has this external HDD ever worked while connected with FireWire? (In other words, did the drive just stop working via FireWire, or is this the first time you've tried to hook it up via FireWire?) Does it work over FireWire on another Mac?
If the answer to those questions is no, it's likely that the firewire ports on the external HDD are bad.

Iomega prestige does not mount with osx 10.7

Iomega prestige does not mount with osx 10.7. I can see the drive under 'about this mac' under storage USB but it does not mount on the desktop or in disk untilities. It does run, the light is on, and I can feel the disk spinning. I have tried PRAM and NVRAM with no luck. Any ideas?

Is the disk designed for 10.7.5, or maybe an older OSX? At this point we are both trouble shooting in the dark. Maybe you might want to return the the drive and get something that you know was built for your machine. This does not make sense to me. Maybe one of the mega dot guys on this site can chime in and offer some info. Sorry I could not offer any more info.

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

My iPhone 4S not compatible with 2008 Q7 Audi MMI. Now only phone numbers come up on screen, no name. Names appeared on the phone screen but not MMI screen. Cannot dial by contact info while driving anymore. Never had this problem with previous iPhones

My iPhone 4S not compatible with 2008 Q7 Audi MMI. Now only phone numbers come up on screen, no name. When someone calls, only the number appears on the MMI screen, not their name or whether they called from their office/home etc..   Same with missed calls, dialed numbers etc.. Names appeared on the screen of the phone, but not on MMI screen. Cannot dial by searching contact and name info while driving anymore. Never had this problem with previous iPhones. Is this an Apple issue or Audi issue? Anyone with this problem? Help!

NIGHTMARE Finally Ends, after nearly two weeks.
After trying for over a week trying to get my replacement iPhone 4S to activate, I ended up driving 110+ miles to an Apple Store to get a second replacement, which had been specially shipped there for me. Popped in the SIM card, went through the setup and I finally have an iPhone 4S that works, at least for the time being.
Advice to others who find themselves in this situation:
     1)     If you get these messages (see original post), the phone is bad. Demand a replacement.
     2)     If the AppleCare tech advises that the Apple Agreement Administration team is investigating, you'll be waiting for a week or more for them to complete it. Demand a replacement immediately, don't let them put you off indefinitely.
After the initial phone call documented in my original post, I was in daily contact, phone & e-mail, with the AppleCare tech trying to figure out the problem, and we tried everything, from forced restore's to switching SIM cards, conferencing w/ AT&T, etc. It seems that this was a case of first impression to Apple, but if it wasn't, then the problem is not well documented or known by those who should know, and for that, the blame should be on Apple, not the AppleCare tech who worked tirelessly trying to figure out a solution--I'd send him a case of beer if I knew where to send it.

Install disc will not mount

I was hoping to use Disc Utility on the install disc that came with my MacBook, but it refuses to mount! My MacBook will read the Applications disc it came with as well as any other DVD I put in. However, it will not mount my install disc or my wife's white MacBook install disc. For whatever reason, it makes some noise and spits it right back out. I tested both discs on my wife's computer and they mount just fine.
Why would my MacBook refuse to mount any install disc but continue to mount all other discs? I tested both single and DL discs.
I should also point out that my drive was just replaced under AppleCare. I am not sure if this was a problem before because I never needed to use the install disc until now.

Since this is a hardware problem you just had fixed, I suggest you take the computer back for more service.

SD Card not mounting with Yosemite, Disk Utility Yes, Finder No

Hi Everyone!
mid-2012 15" rMBP
2.7 GHz i7
16 GB 1600 MHz DDR3
Yosemite 10.10
Installed Yosemite about 2 weeks ago. So far things have been fine.
Just this morning tried reading a Nikon formatted Sony Class 10 (40MB/s) 16 GB SD card through the internal SD card reader - and nothing happened. After some poking around I noticed that the SD card is recognized by both the Disk Utility and the System Software, but not by Finder. The SD card will not mount.
It is not the SD card because it will mount on my buddies MBP running Mavericks (I had to upload the photos through Dropbox off his MBP).
I have already tried resetting both the PRAM and the SMC - it did not change anything. The system would still not mount the SD Card.
Here is the interesting thing. I have taken an old Class 4 8GB SD card which also wasn't being recognized and using Disk Utility, reformatted from MS DOS FAT to EXFat. Now Finder will in fact mount the drive. However, my Nikon or other devices will not accept an ExFAT formatted SD Card.
Check this out:
Anyone have any ideas?
THANKS IN ADVANCE!!!

Re: SD Card not working on Yosemite
Reset NVRAM/PRAM
Reset SMC

External Drive does not mount with Firewire but is ok with USB !

Since 10.4.4 my external drive is no more recognized using firewire, but it mounts perfectly with USB
Using FW request me to reinitialize the disk, but then, the apple disk utility it is unable to reformat!
then I unplug FW , sets USB and everything is ok!
I connected the drive to my old IMac G4 700 and evrything is fine, FW and USB, using the same drive, using the same cable. I did repeat the test many times it is always ok with the old mac and it never mounts with FW on my newer Ibook.
I did reset the openfirmware but that was not successfull!
Then I brought both iBook and the faulty Drive to a friend (he owns a powerbook and also an external drive)
we verified that my drive does not mount on his powerbook G4 12" using FW and is ok with USB.
Then he tried his external drive and was very surprised to find the same fault with his drive and his PB using FW. (as for me everything is ok with USB!)
We are both very puzzled, our drives did work well before, (before 10.4.4 , and 10.4.5 did not improve!)
and now, with firewire,disks never mounts..
In addition I tried with the same cable to alternatively start, using the target mode, the ibook and the imac. For each test they were both recognized as external drives as they should..
So to try to sum up
- Disk mount ok with USB (1 or 2)
- Disk is no more recoknized with FW (but it was before with the exact same hadrware)
- FW Cable seems to be ok as targuet mode works properly
has anybody any idee?
It would be very munch appreciated..
thanks a lot for having read this long post..
External hard drive P/N:
the western digit disk 160G is in an enclosure referenced
Prolific PL3507 Combo Device
I tried to exchange the disk of this box with an old maxtor with the same bad result!
IbookG4 1.2 & IMac G4 700 Mac OS X (10.4.4)

Hi Andre, I can't remember except to say that it was mounting fine with tiger and I was able to copy files to it for backup purposes.
I just hooked it up to a PC and windows tells me the drive is not formatted. That's not a good sign, and this was stupid: I think I had the drive hooked up to my Mac Pro during the upgrade.
Idiotic, granted. But this was an upgrade, not a full install and I maybe was trusting in Apple's ability not to do extraneous stuff during an install like windows does. Oh well...
I appreciate any further ideas. Many Thanks, Frank.

Business catalyst won't let me set up email with .media extension

I have this domain - www.thinkchurch.media that I am using with a business catalyst hosted site. It will not let me set up an email with this domain for some reason even though I have the right hosting plan. It says, "This cannot be an email address."

Hi Bradb725,
We currently have a bug that the email accounts doesn't allow email accounts with more recent domain extensions. File a ticket or reach out to LiveChat support with a list of mailboxes you want and we can create them from our back-end. You won't be able to see these mailboxes in our Email accounts interface, but they'll work properly once they're created from our backend.
Thanks,
Florin

HP6380 will not print with Windows 7 new install

I have an HP 6380 All-in-one printer. It has never given me any problem when
printing in Vista. We purchased a new laptop for the Wife with Win 7. I
installed the printer on there with no problems.
I then decided to upgrade my laptop to 7 Ultimate. What I did was set my laptop as a dual boot machine and Win7 then became a full install, not upgrade.
When I did network printer discovery, 7 performed a search, found the printer,
and set it up. I did the test page print with success. I could not print
anything past that point and subsequent test pages failed.
I went to the HP web site and found a driver download that was supposed to
include 7 support. The installed printer was removed and I ran the new setup.
Still nothing past the initial test page would print. Further research on the HP
site made reference to a patch and reboot which did not fix the problem. There
was another utility on HP site that removed all installed printer files to allow
a fresh install, no luck.
At this point I decided to compare the printer properties between the Wife's
system and mine. Her system called to a port labeled WSD Port HP38147 (HP
Photosmart 6300 Series).
On mine, the reference was to a TC/IP port with the network address of
192.168.1.102.
I tried to change this to a local port also.
There was NO option for a WSD port, and when I tried to add a port, the only
options were Local or TCP/IP.
For now I am having to save items for printing, then go to my Vista via
dual-boot and print there, a royal PIA.
In Vista BTW the port is labeled Standard TC/IP port HP Photosmart C6300 Series.

Did you delete the printer in Devices and Printers and re-add it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Catalyst won't install also floppy not mounted with 2008.04 new ISOs

Similar Messages

Maybe you are looking for