Catastrophic failure -- The Document Information Panel was unable to load
I have a content type that has a document template and a custom document information panel associstaed with it. For most users, these work without issues.
Some users are reporting, however, that they receive the following series of messages when trying to create a new document from the content type:
You are currently working offline.
Here, the user can choose either Try to Connect or Stay Offline.
If the user clicks Try to Connect, the following error message is displayed:
Clicking OK results in the document loading. The DIP loads, but two fields that pull values from a SharePoint list are blank.
Again, this happens for only a handful of users, so it seems like it's an issue with either their local PC or their connection to SharePoint.
So far, I have tried the following:
Repair Office 2010 installation
Removed all locally cached versions of both the document template (.dotx) and the custom DIP (.xsn)
Verified user permissions for the SharePoint site and the SharePoint lookup list
Based on some other posts I've seen, checked to make sure that InfoPath is installed and that IPEDINTL.DLL
is present at
C:\Program Files\Microsoft Office\Office14\1033
Hi,
According to your post, my understanding is that the Document Information Panel was unable to load.
I recommend to go to the
Document Type Advanced Settings, click Edit template, go to
File, click on Inspect, click on Remove All behind
Custom XML Data.
Here is a similar blog for your reference:
Document Information Panel | Joran Markx
If your list contains lookup columns, you can refer to:
SharePoint:
Document Information Panel fails to load when office documents are opened in a library that contains lookup columns
Document Information Panel cannot open the form
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support
Similar Messages
-
The Document Information Panel was unable to load. The document will continue to open ?
I am using Sharepoint 2010; DIP in microsoft word all the while is working fine, not sure why suddenly it came out the following error when save word doc into sharepoint.
ERROR MESSAGE
===========
"The Document Information Panel was unable to load. The document will continue to open.
The form contains schema validation errors.
Content for element 'documentManagement' is incomplete according to the DTD/Schema. "
How to troubleshoot? Recently I added lookup column and a workflow into the library, but I did the same thing in another library which never appear to have any issue on it.The lookup column is creating the problem , you can find powerscript solution to fix this issue , please check this -
Fix through Powershell
http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
Fix through Code
https://social.msdn.microsoft.com/Forums/office/en-US/2a4d6d10-d1d5-4d6a-a22b-62dfb6b60685/lookup-field-creation-and-document-information-panel?forum=sharepointdevelopmentlegacy
or try this -
https://social.technet.microsoft.com/Forums/office/en-US/2552fbc8-da24-4d2b-84f6-d39c4d58b137/the-document-information-panel-was-unable-to-load-the-document-will-continue-to-open-for-more?forum=sharepointgeneralprevious
1. Open this location- C:\Program
Files\Microsoft Web Designer Tools\Office12\1033\IPEDINTL.DLL
2. copy IPEDINTL.DLL
3. paste it here- C:\Program Files\Microsoft
Office\Office12\1033\IPEDINTL.DLL
4. Close all the applications that are presently
open as well as all the browsers
5. Open the sharepoint site in a new browser
and check the results !!
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh GHi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support -
Error: "The document information panel was unable to load"
Hello,
I have created a custom document content type that uses a specified word template for a sharepoint document library for contracts and offers, and added a few custom columns in the document library as well. The word template launches succesfully when creating a new item in the document library, but the problem arises when I add custom columns to the word template content type. When the document loads in Word, I get the following error: "The Document Information Panel was unable to load. The document will continue to open. For more information, contact your system administrator." And in details:
"Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_033AA217-8906-447E-A604-A300F51D4030
Document Information Panel cannot add the following object to the DataObjects collection: list_033AA217-8906-447E-A604-A300F51D4030
list_033AA217-8906-447E-A604-A300F51D4030 could not be added to the DataObjects collection.
The following item already exists in the collection: list_033AA217-8906-447E-A604-A300F51D4030"
Interestingly enough, I have two web applications running on the same server that I have tried to implement this on, and on the other it works flawlessly, meaning that the Document Information Panel launches successfully and I can edit the columns associated with that content type and store the values in a document library. I have also tried to save the DIP template from the working web application and use it as the default DIP template on the other application, but that doesn't work either.
I have also tried to browse through all options and configurations in the application settings in CA and SSP, but to no avail. Any suggestions about what might be causing this problem or how to fix it would be greatly appreciated.
- Sebastian ErikssonHi All,
I have the same problem with my DIP in already two of my document libraries. Please see below:
Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
Document Information Panel cannot add the following object to the DataObjects collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
list_295E77CD-1C08-4DDC-A188-F86107F9BF60 could not be added to the DataObjects collection.
The following item already exists in the collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
I have made the same thing that Kirikou has suggested and I was able to recreate the broken library. The problem is that Kirikou's way has failed on my Share Point staging installation:
[COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
Microsoft.SharePoint.Library.SPRequestInternalClass.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +0
Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +125
[SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +166
Microsoft.SharePoint.WebPartPages.ListViewWebPart.RenderView() +4239
Microsoft.SharePoint.WebPartPages.ListViewWebPart.EnsureData(Int32 token) +658
Microsoft.SharePoint.WebPartPages.SharePointDataProvider.Execute() +254
Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateV2ConnectionsAndSharePointDataFetch() +139
Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateConnections() +85
System.Web.UI.WebControls.WebParts.WebPartManager.OnPageLoadComplete(Object sender, EventArgs e) +52
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Page.OnLoadComplete(EventArgs e) +2063076
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1875
I will be very appreciated if somebody knows what is the reason for this problem.
Best regards,
Yordan Nikolov -
The Document Information Panel was unable to load.
Platform: SharePoint 2013, Office 2013.
Background: When you open an Office document from SharePoint users get this error:
The Document Information Panel was unable to load. The document will continue to load. For more information, contact your system administrator."
"The form cannot be opened. To fix this problem, contact the form designer. Form template:
http://<site address>/../proppanel.xsn. The XML Schema for the form template has an invalid value for the following attribute: location."
I tried running this fix: http://www.cb-net.co.uk/microsoft-articles/2063-sharepoint-2010-templates-and-document-information-panel-errors, but it kept saying that it couldn’t see the url that
I specified (I did check this carefully); think it might only apply to SharePoint 2010 – perhaps the shell syntax is different in 2013.
Can anyone help me out?Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
The Document Information Panel Was unable to load. Please Help
Hello all,
I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library. When I click
"New document" I get this error..
The Document Information Panel was unable to load. THe document will continue to open. For more information, contact your system administrator.
Details:
Document Information Panel cannot open a new form.
The form cannot be opened. To fix this problem, contact the form designer.
Form template: http://Mysite/_cts/DIPTestContentType/Myfirstform.xsn
The SOAP response indicates that an error occurred on the server:
Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
<detail><errorstring xmlns="http://schemas.microsoft.com/sharepoint/soap/">No item exists at http://Mysite/My DIP Test.docx. It may have been deleted or renamed by another user.</errorstring><errorcode xmlns="(html
for the error code..had to delete it because my body text cannot contain images or links until my account is verified but it is a link to Microsoft support)
...It appears that it is not locating the custom Document Panel.
Could anyone point me in the right direction?
ThanksHi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Can anyone help me with syncing my devices?
I'm on a PC that I had to recover, but forgot to save my iTunes data for post recovery.
Now I get the following message, "iTunes was unable to load data class information from Sync Services..."
Thanks!Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
We are using SharePoint 2010 and Excel 2010. In SharePoint, we have created a custom content type that uses an Excel workbook template along with a Document Information Panel (DIP -- an InfoPath form) that always displays when a workbook of this custom
content type is opened. That's all working fine. However, if one of those Workbooks is open with the DIP displayed and the user opens another Excel workbook, a DIP displays for the 2nd workbook even if it's just a regular workbook,
i.e. not one of the custom content type. If the user closes one of the DIPs, both close. And if the user displays one of the DIPs again, both display.
Is there any way to separate out the DIP display for specific workbooks during the same Excel instance so that it shows in one but not in the other? Or is this just something we have to live with (and train our users on)?
Thanks in advance. Carol.Whether the DIP shows or not is a client side toggle, not something tied to an individual workbook. So if you are using the same client instance then the DIP will display or hide based on what you did in the other workbook. YOu might be able
to create a macro that would display or hide it, but that's a lot of work for little advantage. I would train the users and live with it.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Has anybody received this message when trying to sync? - itunes was unable to load data class information from sync services. All purchased apps were lost. Do you know how to recover them?
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
ITunes was unable to load data class information from sync services.
I get the error message "iTunes was unable to load data class information from sync services. Reconnect or try again later" after reinstalling iTunes. I cancel the message and iTunes proceeds to sync with my iPhone 4. The phone and iTunes software are the latest releases. My PC is running Windows 8.1, which had to be reinstalled after the system crashed, requiring a total reinstall of all software.
Doublechecking. You've tried the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
Office 2013 applications crash with Document Information Panel open
I am using Office Professional Plus 2013 to work with documents that reside in SharePoint 2010 document libraries.
The content type(s) in that SharePoint site collection are set to automatically show the Document Information Panel when opened in Office applications. By opening any of these documents in their desktop app (via browser or Skydrive Pro), I am able
to check-out and edit content; but the check-in step always crashes the application, giving a pop-up error: "An unknown errors has caused <office program> to stop working."
By choosing to NOT automatically show the Doc Info Panel for these SharePoint documents, Office 2013 programs can handle everything just fine (editing, versioning, etc.).
If I don't auto-show the Doc Info Panel, but then manually open the panel once I get inside the program, this crashes the program in the same way as before.
If I save a local copy of a document and show the Doc Info Panel in any way (auto or manual), Office 2013 crashes.
I couldn't find any postings on this error and I don't see this incompatibility listed in the
Office 2013 known issues article and was wondering if anyone has had a similar experience?I am having the exact same issue. I have created a Custom Site Column which is defined as a CHOICE. I do not want to put in a Default so left it blanl but field must be populated. I then put this into a Document Library Content Type.
With documents that are already been uploaded and in the Library when I pull up in Office Web Apps, I can make changes to the document but when I try to save it crashes. Also, when I pull up document and say edit in Office Web Apps there is no
way to change information in the Document Information Panel since this does not appear. (I forgot to mention that I required DIF to display in Content Type also).
This only happens on blank column fields when trying to save. If I do a Quick EDIT of the list and change my blank Choice columns to something(I created as radio buttons) and then go through the process it works OK and will save. Not sure
if this pertains to your issue but, I just prepopulate all columns with what the should be, when a brand new document from word, excel etc is created it is created from the Desktop version of Word Excel and when IT saves to SharePoint, I get
a message to choose information to put into properties before it actually saves.
Hope this helps a little. -
"itunes was unable to load data class information..."
Hi everyone,
When I connect the iphone to my computer, the itunes recognize the iphone but it is thinking and after a few minutes the itunes drop me the following message:
"itunes was unable to load data class information from sync services reconnect and try again later".
I tried the following article: http://support.apple.com/kb/TS2690 , but still the problem occur.
What I can do?
(note: it's happen after I format the computer and before and after I update the IOS from 5.1.1 to 6 in the iphone)Try this.
1. Windows Control Panel > Programs > Programs and Features
2. Remove "iTunes"
3. Remove "Apple Mobile Device Support" (this is mandatory!)
4. Reinstall iTunes
I have tried several methods and resolved the problem using the upper method.
I hope this will be helpful. -
Managed metadata columns in document information panel with multiple content types
Hi everyone,
The problem I have is that for custom content types not all managed metadata columns are displayed in Document Information Panel (DIP) for the document in the Office client application.
However, everything works fine with 1 specific content type. Even though the others using exactly the same site columns. The content types are deployed using visual studio to the content type hub, and after this the content types are correctly published to
the site collections, there are no publish issues here.
When I create a document based on the second content type in the same library, all fields are showed in the document information panel, except the managed metadata columns.
Detailed explanation:
Library: procedures
Content types:
- simple procedure (with 4 managed metadata fields and some other text fields)
- procedure with approval (with the same 4 managed metadata fields and some other text fields)
Scenario 1: I add the 'simple procedure' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 2: I add the 'procedure with approval' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 3: I add the 'simple procedure' and 'procedure with approval' content types to the document library procedures (added simple procedure first). When I create a new document based on the 'simple procedure'
content type, everything works fine and he shows all metadata fields. When I add a new document based on the 'procedure with approval' content type, the document information panel shows correctly, except all managed metadata fields. These are not visible at
all. Though they worked perfectly in scenario 1 and 2.
Is this a known issue or is there a workaround for this?
Thanks in advance!
Kind regards, DavyYes!
This problem is solved right now.
My issue was that I'm using custom content types deployed by Visual Studio in the content type hub. To create a managed metadata site column in visual studio, you need to have first of all your managed metadata field, but also a hidden field accompagnied
to make the actual mapping like the example below:
<Field ID="{B654D984-187A-471B-8738-F08F3356CFDA}"
Type="TaxonomyFieldType"
DisplayName="Countries"
ShowField="Term1033"
EnforceUniqueValues="FALSE"
Group="Demo"
StaticName="Countries"
Name="Countries">
<Customization>
<ArrayOfProperty>
<Property>
<Name>TextField</Name>;
<Value xmlns:q6="http://www.w3.org/2001/XMLSchema" p4:type="q6:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">{67308AC2-9556-456B-BF9E-43E8F23EBEE6}</Value>
</Property>
</ArrayOfProperty>
</Customization>
</Field>
<Field Type="Note"
DisplayName="Countries_0"
StaticName="CountriesTaxHTField0"
Name="CountriesTaxHTField0"
ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}"
ShowInViewForms="FALSE"
Required="FALSE"
Hidden="TRUE"
CanToggleHidden="TRUE"
Group="Demo"
RowOrdinal="0"
/>
</Elements>
VERY important here is that when you create your content type using visual studio, you not only have to add the managed metadata site column in your xml (which let the content type work already perfectly) but also add the hidden field to your content type
xml !! This way, SharePoint knows that when you have multiple content types with the same site columns in the same library, the second content type also need to get the hidden field from this site columns like in the example below!
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Parent ContentType: Document (0x0101) -->;
<ContentType ID="0x010100571ebc0f478a49d5a775039347ee1535"
Name="Document Location"
Group="Demo"
Description="A content type containing Managed Metadata Column."
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{B654D984-187A-471B-8738-F08F3356CFDA}" Name="Countries"/>
<FieldRef ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}" Name="CountriesTaxHTField0"/>
<FieldRef ID="{f3b0adf9-c1a2-4b02-920d-943fba4b3611}" Name="TaxCatchAll"/>
<FieldRef ID="{8f6b6dd8-9357-4019-8172-966fcd502ed2}" Name="TaxCatchAllLabel"/>
</FieldRefs>
</ContentType>
</Elements>
I'm very happy I found this solution, because in the whole project i'm implementing, this was used a lot!
Special thanks to the blog of @cann0nf0dder (http://cann0nf0dder.wordpress.com/2013/04/01/creating-a-site-column-with-managed-metadata) which let me think about this!
This ticket is answered now! :-)
Kind regards,
Davy -
When we install CU KB2837583 for Office 2010 Professional Plus I get an error on the document information panel in Word while saving the document to SharePoint 2010.
The error shows a red border around the multiple lines field "Adres" saying that the field contains errors.
We had this issue before with CU
KB2760758, this was a bug and Microsoft has fixed this with Service Pack 2. Now we have the same issue again with this cumulative update.
Microsoft knows this bug and
is working on a solution?Hi,
As the error message, please try the workaround:
Uninstall the KB2826026 update patch.
Quote from:
http://social.technet.microsoft.com/Forums/en-US/b867398d-93fb-4015-82ee-e00f75a671d4/sharepoint-ms-word-document-only-specific-pattern-allowed-only-data-in-the-following-pattern-is?forum=officeitproprevious
Regards,
George Zhao
TechNet Community Support
Maybe you are looking for
-
Unable to update when executed, table gets lock Execution does not stop Execution even for an hour
Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour. update Employees set Status = 'Close' where statusid IN (select statusid from MyView
-
Cinema HD Display and Mac Mini compatibility?
I have an older 23" Cinema HD display and am trying to determine if it is compatible with a new Mac Mini. The only thing that looks like a Ser No is on the base: 2A6402H0G0. Is this the SN? And is it compatible? TIA
-
Here's to the Crazy Ones...those of us furious with the $200 drop
Here's to the crazy ones. The ones who spend the night outside the Apple Store to buy a $600 phone. The ones who take the day off of work just to get a place in line. The ones who have their girlfriends bring by a cup of coffee at 5:00am just so they
-
Will Illustrator cc have the same color wheel options to create swatches like in Photoshop and InDesign?
-
Cursor disappears and window "de-selects" after about 15 seconds. No action on my part causes this.
In any program, including Word or IE, the cursor disappears and the window fades as if de-selected. Happens if the machine is idle OR I'm actually typing. Only way to continue typing is to hit space bar and then type. Recently installed an Epson WP-4