Catch 22 on a defective router

My Linksys E4200v2 router died (no blinking lights when a network cable is attached). I bought the router in Jan. the Hard ware warrenty is good for another 170 days but CISCO technical support says they can not help me since the 90 days technical support period has passed unless i pay $29.
Is this a bait and switch?
Help

AJJohannes wrote:
My Linksys E4200v2 router died (no blinking lights when a network cable is attached). I bought the router in Jan. the Hard ware warrenty is good for another 170 days but CISCO technical support says they can not help me since the 90 days technical support period has passed unless i pay $29.
Is this a bait and switch?
Help
Yes, I agree with sabretooth with that. You mean no lights at all right?

Similar Messages

  • Do I have a defective router?

    I have a Verizon supplied M1424WR router. About a week ago, the internet light went from green to orange. I called support and after various resets and disconnects to reload software, the thing came back up. (it took about 20 minutes to get it working and the tech had no idea what happened.). For the next couple of days everything was fine.
    For the past 2 days, when I click on a URL (almost any URL) in the address box, the internet light just sits there for a good 5-15 seconds before it finally connects to the site. Once on a site, the speed seems to be fine, although sometimes when navigating a site, the same kind of delay occurs.
    Oh and I always used the Verizon site to manage my FIOS TV remotely and now I cannot connect to my STB. I get the "unable to connect" message.
    If I get agreement that  it is the router, how do I get a new one from Verizon?
    Thanks
    sharkman
    Solved!
    Go to Solution.

    I am not saying for sure if have a defective router, but I can tell what I know..
    Those routers have a small/tiny NAT table, which may explain why you are having that/this/those issue(s).
    I point to http://www.dslreports.com/faq/16233
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Defective Router

    I have this IP Camera from Linksys it's the (WVC80N ) and I have a WRT160N Router I have been trying to get it to send motion detection through the email for a long time now, now Upper Level Tech Support says that the problem isn't the Camera, it's the Routers Setup/Application & Gaming the Port Range Triggering is all grayed out, you can't put anything in it. They say the Router is defective, Is there anyway for me to fix this without having to replace the Router, the Router is only 3 months old.

    I've been dealing with Upper Level Tech support for a long time, every since December, now I've had a Linksys Tech Support Expert call me on the phone and told me that sending images of Video through an email you do not even have to bother with the Router, with Single, Fowarding and Triggering Ports. He did some configurations on my computer from his location he said that my AT&T DSL account might work but I have to call them and tell them to get rid of Port 25, they did now I am absolutely scared to test it, because it just might fail again. And no Port Triggering is not grayed out anymore. Thanks Gollum 

  • Defective router or head space problem?

    I just got an HP 9237 PC System 7 with wireless G networking. My older computer is hard wired into the router.
    My airport extreme is also brand new, never used.
    I can connect the HP on the Airport guest network, but I can't connect on the regular network. I can see the network in the list of available wireless networks, and both networks are set up in an identical except for the password.
    But when I attempt to long into the wireless network, I get prompted for the password, I enter it, and then I get an error msg from the HP. But if I connect to the guest network, I get prompted for the password and then I connect OK.
    This appears to be a problem with the airport router, but I wanted to ask you alls opinion before returning it.
    I will continue with some more troubleshooting, I think I will change the guest network password to the same as the main wireless network password. Maybe somehow the HP isn't registering the seperate passwords, though I can't see why that should happen.

    fyi, apple support was able to tell me how to correct this problem. I offer their solution in the event this also affects anyone else.
    They had me delete the guest network and leave only the main network up. I was then able to log into the main network.
    Later I will put in another guest network, I assume that will work. For some reason when both networks are established at the same time, it can cause the main network to fail to be able to be connected to. At least fail with the HP Windows 7 computer I was using, not sure about other OS computers.

  • Connection problems after installing wireless router: frequent "Server not found"

    I recently got a Linksys wireless router but since then, a lot of webpages show "server not found" frequently. I can eventually open these if I keep refreshing the page or come back to it later. This only happens to my desktop PC connected by a cable but never happens to our 3 laptops with wireless connection. The LAN cable changed but problem persists. Desktop PC swapped but problem still persists. Is this simply a defective router?

    What is the model no of the router...?
    Try changing the MTU size to 1350 on the router and power cycle the router and check..

  • WCCP - no ip route-cache cef

    I have the above command on the LAN interface on all of my WAN routers performing WCCP. Per this disccussion topic:
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Data%20Center&topic=Application%20Networking&topicID=.ee7814f&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2a947
    it is recommended to remove that statement. Can someone confirm if the recommendation by dstolt is accurate?

    Andy, no easy question, and prety much send some of us back to basics.. one have to take a deeper look at this command to barely get a good picture. See first link thread , good discussion on your question.. generaly no ip- route-catch improves performance for router forwarding processing desitions.
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&topicID=.ee71a06&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbfa166
    You can find more details on three types of switching methods such as ( fast switching by ip route catch command ), I believe it helps understand better the commands.
    http://www.cisco.com/en/US/tech/tk827/tk831/technologies_white_paper09186a00800a62d9.shtml
    Another instance where you would have IP route catch enable on an interface would be for the use of netflow, IP route-cacth command on an interface is requirement for implementing netflow .
    Rgds
    -Jorge

  • 'no ip route-cache' on Tunnel interfaces

    Hi,
    A quick and hopefully simple question. Is there any reason why 'no ip route-cache' and 'no ip mroute-cache' should be configured on Tunnel interfaces?
    Generally, when should 'no ip route-cache' be configured on an interface?
    Many thanks,
    Andy

    Andy, no easy question, and prety much send some of us back to basics.. one have to take a deeper look at this command to barely get a good picture. See first link thread , good discussion on your question.. generaly no ip- route-catch improves performance for router forwarding processing desitions.
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&topicID=.ee71a06&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbfa166
    You can find more details on three types of switching methods such as ( fast switching by ip route catch command ), I believe it helps understand better the commands.
    http://www.cisco.com/en/US/tech/tk827/tk831/technologies_white_paper09186a00800a62d9.shtml
    Another instance where you would have IP route catch enable on an interface would be for the use of netflow, IP route-cacth command on an interface is requirement for implementing netflow .
    Rgds
    -Jorge

  • E1200 router/comcast

    hi 
    i just picked up the e1200 router on new years eve and it started working fine but now theres issues. the biggest issue we have is that with our various devices work and then they dont want to work. it varies but its usually 1 or 2 that decide to not work and work again.
    i have tried numerous attempts at livechat to fix this and not the best solutions.
    what happens is this various router address comes on the device and blocks any internet on it.
    it usually is 192.168.15.2 and that wont let any internet go on the device.
    my current cell phone had this ip show up and then it switches over to different functioning ips as i refresh the router etc. 
    i hope its not a defective router and that it can be fixed or else ill exchange it.
    but how do i permanently stop this problem?
    i also have setting this error come up before your device is properly set up but could not work due to the dns server response.
    would this all be due to comcast problem or a linksys problem?

    Internet Service Provider and Modem Configurations
    What ISP Service do you have? Cable or DSL?
    What ISP Modem Mfr. and model # do you have?
    What wireless modes are you using?
    2.4Ghz Routers only: Try single mode G or N or mixed G and N?
    Channel Width set for Auto 20/40Mhz or try 20Mhz only.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
    What wireless devices do you have connected?
    Ensure any devices with WiFi adapter drivers are updated.
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...

  • FIOS Router Replacement - Is it leased (no charge for replacement)?

    Hi all,
    All's working good, no problems but I was curious about the procedure for replacing a defective Router Unit.  I have the Westell Model A90-9100M15-10 (91OOEM) model Coax/Ethernet Router unit.
    Is there an additional fee for obtaining a replacement?  Are these Routers leased, ie, cost included in my monthly Verizon FIOS bill?
    If I needed to order a replacement Router, is the shipping turnaround time usually 1 day?
    Can these Routers be obtained at a local Verizon outlet store?  I'm located near one of those stores.
    Solved!
    Go to Solution.

    The router is not leased.  There is no monthly charge for it.
    Over the years, VZ's policy regard the router has changed several times, so it depends on when you got the router.
    1)  Originally VZ gave away the router.
    2)  Then VZ stated charging for the router, but issuing a credit for the amount of the charge resulting in a net cost of $0.
    3)  Now VZ says they own the router.
    In any case, VZ will replace a faulty router at no charge.  They may or may not want the old router back depending on it's age.
    Shipping turnaround on a replacement router is very fast.  Whether you get it in one day depends on when you order it.
    Yes, you should be able to obtain a replacement router at a VZ store.

  • Time Machine error message "Unable to complete backup....."

    I just purchased Time Capsule and attempted to do my initial backup. I had to stop during the middle of the process. When I returned to resume the backup I get the following error message: "Unable to create backup. An error occurred creating the backup directory." Has anyone else gotten this error message? If so, any suggestions on how to fix this. I tried doing everything that Setup Guide suggested with no success.
    After reading some of the posts here, I've made sure that my Time Capsule name is short and without special characters but nothing has worked. Any help would be appreciated.

    My initial backup (350GB on WiFi N 5Ghz wide-channel) seemed like it would take 3 days (which is fine), but after 1 day, I too got that error. I started the backup again and it went for an hour, then the same error. Started again, went for 5 minutes, same error. Now I can't even start it again--I've tried many times and the error is now instantaneous.
    The first time the error happened, the backup seemed to pick up where it left off. After that, though, all progress each time was lost.
    The network itself has never gone down, and the light has stayed green. And the 2Wire DSL router it's attached to seems to be fine as well.
    I'm wiping the drive (with the zero option in the hopes of catching and physical defects early) and will try again tomorrow.
    All software and firmware is up-to-date: I made sure before turning on the Time Capsule.
    Ethernet is not really an option--I'd have to run a long cord though a high-traffic area, and accidents would happen.

  • New AirPort Extreme will not connect to internet

    Purchased AirPort Extreme to replace older D Link 655 router. All of my Apple gear has been plug and play except this
    Extreme router.  I cannot get an internet connection to save my soul.  I tried connecting thru both my MacBook Pro and my HP Pavilion dv6.  I just assumed I could move the ethernet cord from the DIR-655 to the AirPort and all would be fine.  Not so.  I have reset, unplugged and restarted so many times I lost count.  Nothing works.  What am I doing wrong.  I even swapped out at store where I bought thinking I had defective router.  any ideas?  My wife works from home and I really need a better router with greater reach and thought this was it.  Please help.

    Simply restarting the modem will not always allow it to reset correctly so that it will issue a new valid IP address to the AirPort Extreme.
    Power off the cable modem completely for at least 30 minutes....longer will not hurt. Be sure to unplug the power cord from the back of the modem or unplug the power cord at the AC wall jack. If the modem has an easily accessible battery, pull the battery.
    Power off the AirPort Extreme as well.
    After the modem power down period, insure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme. Reinstall the modem battery if it was installed previously.
    Power up the modem and let it run for 10 minutes by itself.
    Then power up the AirPort Extreme and let it run for a few minutes. Check to see if the Internet connection is working correctly now.

  • Macbook Pro 2012 Kernel Panic

    During graphic intensive applications(gaming, netflix, etc), my macbook pro will randomly hard freeze(sometimes it's after a few minutes and other times several hours). I can't access any other applications during this, and I can't force quit using the shortcut. The only thing I can do is press the power button and turn it off. Somtimes I can move my mouse, and sometimes I can't. When I can, it is the colorful pinwheel.
    I disabled automatic graphics switching, and that did not help. I then ran a hardware test, and it was hanging on the memory portion of the test. I took my mac to the apple store two weeks ago with this problem, and they thought it was a memory problem and replaced my memory (sidenote: I had taken my apple back for repairs in last October because of kernel panics. They replaced my hardrive, logicboard, and my memory, but they only put back in 4GB when I originally upgraded to 8GB).  They upgraded my memory to the 8GB again with the replacement, and it seemed fine. I was using it without problems, but now my mac is having problems again.
    Random freezes where I have to forcibly shut off my mac happen a couple times a day, and now I'm starting to get kernel panics. The kernel panics both involved the NVDAResman and Geforce in the extension backtrace. (I've had two kernel panics the past two days). It's also a lot slower starting up, and sometimes it freezes during the startup with the mac icon and the gray backdrop or the login screen forcing me to restart.
    I ran the hardware test again out of curiosity, and it's still hanging at the memory portion of the test. I'm a little at a loss as to what to do.
    My latest panic report:
    Thu Jul 18 13:28:49 2013
    panic(cpu 4 caller 0xffffff7f8e6e2f1a): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0fd510de 0x00100406 0xc0000000, BAR0 0x103000000 0xffffff80fe005000 0x0e7150a2, D0, P2/3\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80fdb8aa90 : 0xffffff800c41d626
    0xffffff80fdb8ab00 : 0xffffff7f8e6e2f1a
    0xffffff80fdb8abd0 : 0xffffff7f8cb9cf1e
    0xffffff80fdb8ac90 : 0xffffff7f8cc7112d
    0xffffff80fdb8acd0 : 0xffffff7f8cc7118e
    0xffffff80fdb8ad40 : 0xffffff7f8cf94146
    0xffffff80fdb8adb0 : 0xffffff7f8cc99a75
    0xffffff80fdb8add0 : 0xffffff7f8cba3d50
    0xffffff80fdb8ae80 : 0xffffff7f8cba17d0
    0xffffff80fdb8b080 : 0xffffff7f8cba310a
    0xffffff80fdb8b150 : 0xffffff7f8dc174a8
    0xffffff80fdb8b290 : 0xffffff7f8dbd585f
    0xffffff80fdb8bc70 : 0xffffff7f8dbb449c
    0xffffff80fdb8bde0 : 0xffffff800c8655cd
    0xffffff80fdb8be40 : 0xffffff800c4988b4
    0xffffff80fdb8be80 : 0xffffff800c420b3d
    0xffffff80fdb8beb0 : 0xffffff800c410448
    0xffffff80fdb8bf00 : 0xffffff800c41961b
    0xffffff80fdb8bf70 : 0xffffff800c4a6536
    0xffffff80fdb8bfb0 : 0xffffff800c4ce9e3
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8cb 3b000->0xffffff7f8cde0fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8caa5000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8cb27000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8cae4000
             com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7f8dbb10 00->0xffffff7f8dc7efff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8cb 3b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8cb27000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8caa5000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8cae4000
             com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f8e6d5000->0xffffff7f8e6e7fff
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7f8e6d0000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8caa5000
                dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f8e6bc000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f8c9e8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8cb27000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8cae4000
             com.apple.nvidia.gk100hal(8.1.2)[8007AA34-6789-37E9-B069-A414AA26C6B6]@0xffffff 7f8cdec000->0xffffff7f8d11dfff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8cb 3b000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8caa5000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x000000000c200000
    Kernel text base: 0xffffff800c400000
    System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
    System uptime in nanoseconds: 44968965432
    last loaded kext at 23342058276: com.apple.driver.AudioAUUC    1.60 (addr 0xffffff7f8de68000, size 32768)
    loaded kexts:
    com.driver.LogJoystick    2.0
    com.logitech.driver.LogiGamingMouseFilter    1
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AGPM    100.12.87
    com.apple.driver.ApplePlatformEnabler    2.0.6d1
    com.apple.driver.X86PlatformShim    1.0.0
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleHDAHardwareConfigDriver    2.3.7fc4
    com.apple.iokit.IOBluetoothSerialManager    4.1.4f2
    com.apple.iokit.IOBluetoothUSBDFU    4.1.4f2
    com.apple.driver.AppleHDA    2.3.7fc4
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleBacklight    170.2.5
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.1.4f2
    com.apple.driver.ApplePolicyControl    3.4.5
    com.apple.driver.AppleSMCPDRC    1.0.0
    com.apple.driver.AppleSMCLMU    2.0.3d0
    com.apple.driver.AppleMuxControl    3.4.5
    com.apple.driver.AppleMikeyDriver    2.3.7fc4
    com.apple.driver.AppleUpstreamUserClient    3.5.10
    com.apple.driver.AppleMCCSControl    1.1.11
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.GeForce    8.1.2
    com.apple.driver.AppleIntelHD4000Graphics    8.1.2
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.AppleIntelFramebufferCapri    8.1.2
    com.apple.nvidia.NVDAStartup    8.1.2
    com.apple.driver.SMCMotionSensor    3.0.3d1
    com.apple.driver.AppleUSBTCButtons    237.1
    com.apple.driver.AppleUSBTCKeyEventDriver    237.1
    com.apple.driver.AppleUSBTCKeyboard    237.1
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.5
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.3.1
    com.apple.driver.AppleUSBHub    5.5.5
    com.apple.driver.AppleSDXC    1.4.2
    com.apple.iokit.AppleBCM5701Ethernet    3.6.1b4
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Brcm4331    615.20.17
    com.apple.driver.AppleAHCIPort    2.5.2
    com.apple.driver.AppleUSBEHCI    5.5.0
    com.apple.driver.AppleUSBXHCI    5.6.0
    com.apple.driver.AppleEFINVRAM    1.7
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleACPIButtons    1.7
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.7
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2.1
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOSurface    86.0.4
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    10.0.6
    com.apple.iokit.IOBluetoothFamily    4.1.4f2
    com.apple.driver.DspFuncLib    2.3.7fc4
    com.apple.iokit.IOAudioFamily    1.8.9fc11
    com.apple.kext.OSvKernDSPLib    1.6
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.4f2
    com.apple.nvidia.gk100hal    8.1.2
    com.apple.driver.AppleGraphicsControl    3.4.5
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleThunderboltEDMSink    1.1.8
    com.apple.driver.AppleThunderboltEDMSource    1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter    1.8.9
    com.apple.driver.AppleSMBusController    1.0.11d0
    com.apple.driver.AppleSMBusPCI    1.0.11d0
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.X86PlatformPlugin    1.0.0
    com.apple.NVDAResman    8.1.2
    com.apple.iokit.IOAcceleratorFamily    74.5.1
    com.apple.driver.IOPlatformPluginFamily    5.3.0d51
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.iokit.IONDRVSupport    2.3.7
    com.apple.driver.AppleHDAController    2.3.7fc4
    com.apple.iokit.IOGraphicsFamily    2.3.7
    com.apple.iokit.IOHDAFamily    2.3.7fc4
    com.apple.driver.AppleSMC    3.1.4d2
    com.apple.driver.AppleUSBMultitouch    237.3
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.6
    com.apple.driver.AppleUSBMergeNub    5.5.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
    com.apple.driver.AppleThunderboltNHI    1.7.8
    com.apple.iokit.IOThunderboltFamily    2.4.0
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    530.4
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBUserClient    5.5.5
    com.apple.iokit.IOAHCIFamily    2.3.1
    com.apple.iokit.IOUSBFamily    5.6.0
    com.apple.driver.AppleEFIRuntime    1.7
    com.apple.iokit.IOHIDFamily    1.8.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220.3
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    345
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.7
    com.apple.iokit.IOPCIFamily    2.7.3
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    System Profile:
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.1f173
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455302D474E2D4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9

    That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
    A stale or corrupt kernel cache
    A damaged OS X installation
    A fault in a peripheral device, if any
    Corrupt non-volatile memory (NVRAM)
    An internal hardware fault (including incompatible memory)
    An obscure bug in OS X
    You may already have ruled out some of these.
    Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
    Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
    If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
    The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
    In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
    Connecting more than one display is another reported trigger for OS X bugs.
    If your system is not fully up to date, running Software Update might get you a bug fix.
    In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
    If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
    Print the first page of the panic report and bring it with you.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least  two independent backups.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Why does my MBP restart itself randomly several times a day? Something about a "Panic Report".

    Ok so my MacBook Pro shuts itself down and restarts at least 4 times a day. Usually this happens when im away from my computer and its been idle or sleeping or whatever it does, however just 30 minutes ago this happened while i was using it and then it wouldnt restart it just kept showing the loading "apple" logo with loading bars comntinuously spinning... I had to shut it down manually and then it took an extra long time to load before finally loading to the user login page. Now generally... upon start up after this "panic" i will recieve a"Panic report" that says something aloong the lines of...
    Interval Since Last Panic Report:  27841 sec Panics Since Last Report:          2 Anonymous UUID:                    6EBC0F43-E7CB-480C-8D91-9EA7C74EEECC  Wed Jun  5 01:28:29 2013 panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c8e1f, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0xffffff80d17a0628, CR3: 0x000000008a22e00d, CR4: 0x00000000001606e0 RAX: 0xffffff80d15621f8, RBX: 0xffffff80d1562000, RCX: 0x000000000003cb26, RDX: 0x0000000000000000 RSP: 0xffffff80ef4f3960, RBP: 0xffffff80ef4f3a40, RSI: 0x000000807e876986, RDI: 0xffffff80ef4f39d9 R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0x0000000000000000 R12: 0xffffff80d179e000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff80ef4f3960 RFL: 0x0000000000010286, RIP: 0xffffff7f816c8e1f, CS:  0x0000000000000008, SS:  0x0000000000000010 CR2: 0xffffff80d17a0628, Error code: 0x0000000000000000, Faulting CPU: 0x0  Backtrace (CPU 0), Frame : Return Address 0xffffff80ef4f3610 : 0xffffff8000220792  0xffffff80ef4f3690 : 0xffffff80002c4794  0xffffff80ef4f3840 : 0xffffff80002da55d  0xffffff80ef4f3860 : 0xffffff7f816c8e1f  0xffffff80ef4f3a40 : 0xffffff7f816e5c05  0xffffff80ef4f3a80 : 0xffffff7f816c7257  0xffffff80ef4f3ab0 : 0xffffff7f80c95832  0xffffff80ef4f3af0 : 0xffffff7f80c9593d  0xffffff80ef4f3b10 : 0xffffff7f80c9ecff  0xffffff80ef4f3b70 : 0xffffff7f80c9edc8  0xffffff80ef4f3b90 : 0xffffff7f80c9c138  0xffffff80ef4f3bb0 : 0xffffff7f80c9c4bc  0xffffff80ef4f3be0 : 0xffffff80006565fe  0xffffff80ef4f3c40 : 0xffffff8000656fbb  0xffffff80ef4f3d80 : 0xffffff80002a3f08  0xffffff80ef4f3e80 : 0xffffff8000223096  0xffffff80ef4f3eb0 : 0xffffff80002148a9  0xffffff80ef4f3f10 : 0xffffff800021bbd8  0xffffff80ef4f3f70 : 0xffffff80002aef10  0xffffff80ef4f3fb0 : 0xffffff80002daec3        Kernel Extensions in backtrace:          com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8a000->0xffffff7f80cc2fff             dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000          com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c4000->0xffffff7f8172afff             dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000             dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc3000             dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8a000  BSD process name corresponding to current thread: WindowServer  Mac OS version: 11G63  Kernel version: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5 System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)  System uptime in nanoseconds: 5870204567267 last loaded kext at 49584802694: com.apple.driver.AppleMikeyHIDDriver     122 (addr 0xffffff7f8167a000, size 20480) last unloaded kext at 200341249727: com.apple.driver.AppleUSBTCKeyEventDriver     227.6 (addr 0xffffff7f814f7000, size 8192) loaded kexts: com.apple.driver.AppleMikeyHIDDriver     122 com.apple.driver.X86PlatformShim     5.0.0d8 com.apple.driver.AGPM     100.12.75 com.apple.driver.AppleHDA     2.2.5a5 com.apple.driver.AppleUpstreamUserClient     3.5.9 com.apple.driver.AudioAUUC     1.59 com.apple.driver.AppleMikeyDriver     2.2.5a5 com.apple.driver.AppleSMCLMU     2.0.1d2 com.apple.driver.AppleIntelHD4000Graphics     7.3.2 com.apple.driver.SMCMotionSensor     3.0.2d6 com.apple.driver.AppleSMCPDRC     5.0.0d8 com.apple.iokit.IOUserEthernet     1.0.0d1 com.apple.iokit.IOBluetoothSerialManager     4.0.8f17 com.apple.Dont_Steal_Mac_OS_X     7.0.0 com.apple.driver.AudioIPCDriver     1.2.3 com.apple.driver.ApplePolicyControl     3.1.33 com.apple.driver.AppleLPC     1.6.0 com.apple.driver.AppleBacklight     170.2.2 com.apple.driver.AppleMCCSControl     1.0.33 com.apple.driver.AppleIntelFramebufferCapri     7.3.2 com.apple.filesystems.autofs     3.0 com.apple.driver.BroadcomUSBBluetoothHCIController     4.0.8f17 com.apple.driver.AppleUSBTCButtons     227.6 com.apple.driver.AppleUSBTCKeyboard     227.6 com.apple.driver.AppleIRController     312 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1 com.apple.BootCache     33 com.apple.iokit.SCSITaskUserClient     3.2.1 com.apple.driver.XsanFilter     404 com.apple.iokit.IOAHCISerialATAPI     2.0.3 com.apple.iokit.IOAHCIBlockStorage     2.1.0 com.apple.driver.AppleSmartBatteryManager     161.0.0 com.apple.driver.AppleFWOHCI     4.9.0 com.apple.driver.AirPort.Brcm4331     561.7.22 com.apple.driver.AppleSDXC     1.2.2 com.apple.driver.AppleUSBHub     5.1.0 com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8 com.apple.driver.AppleEFINVRAM     1.6.1 com.apple.driver.AppleAHCIPort     2.3.1 com.apple.driver.AppleUSBEHCI     5.1.0 com.apple.driver.AppleUSBXHCI     1.1.0 com.apple.driver.AppleACPIButtons     1.5 com.apple.driver.AppleRTC     1.5 com.apple.driver.AppleHPET     1.7 com.apple.driver.AppleSMBIOS     1.9 com.apple.driver.AppleACPIEC     1.5 com.apple.driver.AppleAPIC     1.6 com.apple.driver.AppleIntelCPUPowerManagementClient     195.0.0 com.apple.nke.applicationfirewall     3.2.30 com.apple.security.quarantine     1.4 com.apple.security.TMSafetyNet     8 com.apple.driver.AppleIntelCPUPowerManagement     195.0.0 com.apple.driver.DspFuncLib     2.2.5a5 com.apple.iokit.IOSurface     80.0.2 com.apple.iokit.IOSerialFamily     10.0.5 com.apple.iokit.IOFireWireIP     2.2.5 com.apple.iokit.IOAudioFamily     1.8.6fc18 com.apple.kext.OSvKernDSPLib     1.3 com.apple.driver.AppleHDAController     2.2.5a5 com.apple.iokit.IOHDAFamily     2.2.5a5 com.apple.driver.X86PlatformPlugin     5.1.1d6 com.apple.driver.AppleSMC     3.1.3d10 com.apple.driver.AppleSMBusPCI     1.0.10d0 com.apple.driver.IOPlatformPluginFamily     5.1.1d6 com.apple.driver.AppleGraphicsControl     3.1.33 com.apple.driver.AppleBacklightExpert     1.0.4 com.apple.iokit.IONDRVSupport     2.3.4 com.apple.driver.AppleSMBusController     1.0.10d0 com.apple.iokit.IOGraphicsFamily     2.3.4 com.apple.kext.triggers     1.0 com.apple.driver.AppleUSBBluetoothHCIController     4.0.8f17 com.apple.iokit.IOBluetoothFamily     4.0.8f17 com.apple.driver.AppleUSBMultitouch     230.5 com.apple.driver.AppleThunderboltDPInAdapter     1.8.5 com.apple.driver.AppleThunderboltDPAdapterFamily     1.8.5 com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.5 com.apple.iokit.IOUSBHIDDriver     5.0.0 com.apple.driver.AppleUSBMergeNub     5.1.0 com.apple.driver.AppleUSBComposite     5.0.0 com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.2.1 com.apple.iokit.IOBDStorageFamily     1.7 com.apple.iokit.IODVDStorageFamily     1.7.1 com.apple.iokit.IOCDStorageFamily     1.7.1 com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.1 com.apple.driver.AppleThunderboltNHI     1.6.0 com.apple.iokit.IOThunderboltFamily     2.0.3 com.apple.iokit.IOFireWireFamily     4.4.8 com.apple.iokit.IO80211Family     420.3 com.apple.iokit.IOEthernetAVBController     1.0.1b1 com.apple.iokit.IONetworkingFamily     2.1 com.apple.iokit.IOUSBUserClient     5.0.0 com.apple.iokit.IOAHCIFamily     2.0.8 com.apple.iokit.IOUSBFamily     5.1.0 com.apple.driver.AppleEFIRuntime     1.6.1 com.apple.iokit.IOHIDFamily     1.7.1 com.apple.iokit.IOSMBusFamily     1.1 com.apple.security.sandbox     177.9 com.apple.kext.AppleMatch     1.0.0d1 com.apple.driver.DiskImages     331.7 com.apple.iokit.IOStorageFamily     1.7.2 com.apple.driver.AppleKeyStore     28.18 com.apple.driver.AppleACPIPlatform     1.5 com.apple.iokit.IOPCIFamily     2.7 com.apple.iokit.IOACPIFamily     1.4 Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, SMC 2.2f38 Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353237334448302D434B302020 Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353237334448302D434B302020 AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22) Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB Serial ATA Device: HL-DT-ST DVDRW  GS31N USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2 USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3 USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2 USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3 USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 6 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9 USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 4
    What the HECK is happening and whats causing this???? How do i fix it?

    That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
    A stale or corrupt kernel cache
    A damaged OS X installation
    A fault in a peripheral device, if any
    Corrupt non-volatile memory (NVRAM)
    An internal hardware fault (including incompatible memory)
    An obscure bug in OS X
    You may already have ruled out some of these.
    Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
    Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
    If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
    The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
    In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
    Connecting more than one display is another reported trigger for OS X bugs.
    In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
    If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
    Print the first page of the panic report and bring it with you.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least  two independent backups.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Your Computer was restarted because of a problem

    Hi, I got a Macbook pro last year and it was working fine until a few months back the model is an old A1150 and I am getting this problem. Everytime I turn on the computer it restart by itself after that it works fine and I get this error.
    I have replace my HD and installed the new OS X wich resolve the problem but its back again.
    Interval Since Last Panic Report:  15573 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    002EE0A1-29E0-171B-0595-E4D1229996BE
    Thu Oct 10 10:33:32 2013
    panic(cpu 0 caller 0xffffff800604450e): "a freed zone element has been modified in zone: HFS node"@/SourceCache/xnu/xnu-2050.48.11/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80bc60b570 : 0xffffff800601d636
    0xffffff80bc60b5e0 : 0xffffff800604450e
    0xffffff80bc60b620 : 0xffffff8006043d52
    0xffffff80bc60b700 : 0xffffff80062f6bf2
    0xffffff80bc60b770 : 0xffffff80062f83ce
    0xffffff80bc60b870 : 0xffffff8006300b42
    0xffffff80bc60ba90 : 0xffffff8006118894
    0xffffff80bc60bad0 : 0xffffff80060f27cc
    0xffffff80bc60bb50 : 0xffffff80060f21ae
    0xffffff80bc60bc10 : 0xffffff800610cac2
    0xffffff80bc60bd90 : 0xffffff800610572c
    0xffffff80bc60bf50 : 0xffffff80063e97ba
    0xffffff80bc60bfb0 : 0xffffff80060cf453
    BSD process name corresponding to current thread: mdworker
    Mac OS version:
    12F37
    Kernel version:
    Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
    Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
    Kernel slide:     0x0000000005e00000
    Kernel text base: 0xffffff8006000000
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    System uptime in nanoseconds: 72173589356
    last loaded kext at 25062844072: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7f878e1000, size 32768)
    loaded kexts:
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.1.7f2
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AppleHDAHardwareConfigDriver          2.4.7fc2
    com.apple.driver.AppleHDA          2.4.7fc2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.CSRBluetoothHostControllerUSBTransport          4.1.7f2
    com.apple.GeForce          8.1.6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.11d1
    com.apple.driver.AppleUpstreamUserClient          3.5.12
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleLPC          1.6.3
    com.apple.driver.AppleMuxControl          3.4.5
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.nvidia.NVDAStartup          8.1.6
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleUSBTrackpad          237.1
    com.apple.driver.AppleUSBTCKeyEventDriver          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.CSRHIDTransitionDriver          4.1.7f2
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.6
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.5
    com.apple.driver.AppleUSBHub          623.4.4
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleAHCIPort          2.6.6
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleUSBEHCI          621.4.6
    com.apple.driver.AppleUSBUHCI          621.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.8
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          214.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          214.0.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.4.7fc2
    com.apple.iokit.IOAudioFamily          1.9.2fc7
    com.apple.kext.OSvKernDSPLib          1.12
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.1.7f2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.4.7fc2
    com.apple.iokit.IOHDAFamily          2.4.7fc2
    com.apple.nvidia.nv50hal          8.1.6
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.7f2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.NVDAResman          8.1.6
    com.apple.driver.IOPlatformPluginFamily          5.4.1d11
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleSMC          3.1.5d4
    com.apple.iokit.IOUSBHIDDriver          623.4.0
    com.apple.driver.AppleUSBMergeNub          621.4.6
    com.apple.driver.AppleUSBComposite          621.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.6
    com.apple.iokit.IOUSBUserClient          630.4.4
    com.apple.iokit.IO80211Family          530.5
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.5.1
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          630.4.5
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.8
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 6 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305435323637415A332D43463720
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305435363633435A332D43453620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.1.7f2 12718, 3 service, 12 devices, 3 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: WDC WD10JPVX-22JC3T0, 1 TB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2

    That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
    A stale or corrupt kernel cache
    A damaged OS X installation
    A fault in a peripheral device, if any
    Corrupt non-volatile memory (NVRAM)
    An internal hardware fault (including incompatible memory)
    An obscure bug in OS X
    You may already have ruled out some of these.
    Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation may solve a problem that isn't solved by reinstalling in place.
    Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
    If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model.
    The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
    In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
    Connecting more than one display is another reported trigger for OS X bugs.
    If your system is not fully up to date, running Software Update might get you a bug fix.
    In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
    If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
    Print the first page of the panic report and bring it with you.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least  two independent backups.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • How can I remotely access my computer from a different location on Apple Remote Desktop?

    I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!

    Hi austinmac14,
    So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
    That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
    If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
    Also these steps are so one person, can connect to one computer at your work.
    Open Airport Utility:
    go to the dock
    Click on the finder
    go to the menu bar
    Click on the "Go" menu
    Chose "Utilities" from the "Go" Menu
    double Click on "AirPort Utility"
    Access the Base Station:
    Double Click on your Airport Extreme BaseStation that is your internet connection router.
    a new window should pop up with your Airport Base Station as the Window Name
    Configure Static Address for the computer you want to connect to via ARD:
    Click on the internet Icon from the toolbar
    Click on the "DHCP" tab
    For "DHCP Reservations:"  Click on the "+" button
    For the "Description" put "ARD"
    For "Reserve Address by:"  set "DHCP Client ID"
    Click the "Continue" button
    For "DHCP Client ID:" set "ARD"
    write down the number in "IPv4" address field
    Click the "Done" Button
    Configure routing to ARD computer:
    Click on the "Advanced" icon from the tool bar.
    Click on the "Port Mapping" tab
    Click on the "+" button
    for "Service:" Chose "Apple Remote Desktop"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Apple Events"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Login - SSH"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "Update" button.
    wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
    Configure the ARD computer to use the correct IP address:
    Go to the computer you want to be able to remotely connect to
    On that computer, Go to the menu bar
    Chose the "Apple" menu bar
    Chose "System Preferences…"
    Click on the "Show All" button
    Click on the "Network" icon
    For the active network connection, (the connection on the left side with the green dot), click on it
    Clock on the "Advanced…" button
    Click on the "TCP/IP" tab
    for the "DHCP Cient ID: field put "ARD".
    Click the "OK" button
    Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
    Find out what your public internet IP address is.
    On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
    when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
    At this point you should be able to connect to the computer remotely
    connect to the internet from another location.
    open Apple Remote Desktop
    go to the file menu
    chose connect to computer using ip address
    set the address to the address to the IP address you wrote down for step 6. 2.
    use the same password as you used to connect to the computer at work using ARD.
    So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
    Also some network connections change.  When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
    Of corse there are ways around this. But that's kind of another conversation.
    Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
    ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
    This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

Maybe you are looking for

  • Enhance a datasource with BWA1 in CRM

    Hi there, can anybody tell me how i can change the selection option (from A to P) in the extractstructure in BWA1. Although I am in the change mode, it is not possible to change this field. Probably, this is a very simple question with an equal simpl

  • Using imac as PS3 display

    Hi I was wondering if there is anyway i could use my imac 24 inch as a display for my PS3, possibly by means of HDMI. the imac is the june 2009 24" model with the 1920x1200 display. Thanks

  • Wrong security configuration in web.xml

    Hi all I am developing an application with JDeveloper 10.1.3.3 using ADF-BC/JSF. I have followed the example of SRDemo and my .jspx files are located in two folders : public_html/app and public_html/pricelist/ My application will have two user roles.

  • Created a flow chart and now cant' edit

    I created this flow chart and now it just acts like a regular object and I cant edit it anymore.

  • Avelsieve invalid backend

    Greetings I have been using avelsieve successfully for message filtering & forwarding, accessing GUI via squirrelmail on my OS X Server (10.4.8) But when I tried to log in to alter a filter today, I was unable to get to the message filters screen (ca