Catch system error

hi,
how to catch the system error in dialog program (PAI event).
Regards,
ARUN

Seems that your field is not typed correctly in the screen and/or the program. What is the data which is to be entered into this field, is it a date?, a decimal number? what exactly? In screen painter, you must set the field type, for example, if you need a decimal field, you need to make it DEC, or QUAN, instead of CHAR field. If it is to be a date field, then it must be set as DATS.
Regards,
Rich Heilman

Similar Messages

Catching System Error Message in Abap Proxy.

Hi all,
I want to know whether it is possible to catch the system error message from SXMB_MONI in proxy scenario's.
The error i am getting is :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Service is not active</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 403 with the description Forbidden Error when sending by HTTP (error code: 403, error text: Forbidden)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Is it possble to catch the above message text.
Regards,
Keith

Hi Keith,
Check this forums also should be definitely help u..
Error message handling in Integration Process
and
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
also refer
Check this weblog once ... sure it will give u an idea..
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
and also go through this
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Regards,
Sridhar

Catch system error in sync soap sender

I fear this is not possible in standard.
Refer to this blog to understand the fault messages and why you canot capture System Error Messages,
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
Regards
Bhavesh

Hey all more info regarding the persistent problem is in here
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
please have a look at it

System Error - BPM

I am trying to enter a value in the System Error for the Send step to catch System Error and I am not able to. The drop down is empty.
Can someone help?

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

Catchable Runtime Errors list (CATCH SYSTEM-EXCEPTIONS)?

Hi All,
I was just going through CATCH SYSTEM-EXCEPTIONS syntax. Could anyone give all the possible SAP existing Exceptions or kindly let me know how I can find in the system (4.6C) ?
Thankss,
Neeth

Hi Vijay,
Having read this post of yours, I couldn't help appreciating your modesty. And we hope to see much more active participation from your in this forum.
By the way, you now have 50 points with just 22 posts. Now, can you keep up this ratio? Just try it. And you will know better
Trying to pull your leg, anand mandalika.
========================================================
And Nameeth,
I really appreciate your coming back and rewarding the responses promptly. Please keep that up.
Regards,
Anand Mandalika.

Catch all error information while validating xml content with xsd schema

Hi experts,
I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below is a part of my java mapping.
XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
parser.setFeature( "http://xml.org/sax/features/validation" , true);
parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); // schema is my schema name
parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends DefaultHandler
parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
// In error handler, I comment all code so as not to throw any exception
public class ParseErrorHandler extends DefaultHandler
     public void error(SAXParseException e) throws SAXException
          // sSystem.out.println("Error" + e.getMessage());
          // throw e;
     public void fatalError(SAXParseException e)
          // throw e;
          // System.out.println("SAP Fatal Error" + e.getMessage());
Unfortunately the program always stopped while catching the first error. Check the below log.
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
ERRORS :
cvc-simple-type : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
cvc-data : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is is not valid with respoct to the corresponding simple type definition.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is associated with invalid data.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]' is not valid with respect to it's complex type definition..
-> com.sap.engine.lib.xml.parser.ParserException:
I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error handler logic? Is there any body can make me get out of this?
Thanks.

<h6>Hi experts,
<h6>
<h6>I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all <h6>error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below <h6>is a part of my java mapping.
<h6>XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
<h6>parser.setFeature( "http://xml.org/sax/features/validation" , true);
<h6>parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
<h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          <h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); <h6>// schema is my schema name
<h6>parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends Default Handler
<h6>parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
<h6>
<h6>// In error handler, I comment all code so as not to throw any exception
<h6>public class ParseErrorHandler extends DefaultHandler
<h6>{
<h6>     public void error(SAXParseException e) throws SAXException
<h6>     {
<h6>          // sSystem.out.println("Error" + e.getMessage());
<h6>          // throw e;
<h6>     }
<h6>
<h6>     public void fatalError(SAXParseException e)
<h6>     {
<h6>          // throw e;
<h6>          // System.out.println("SAP Fatal Error" + e.getMessage());
<h6>
<h6>     }
<h6>
<h6>}
<h6>
<h6>Unfortunately the program always stopped while catching the first error. Check the below log.
<h6>
<h6>com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
<h6>ERRORS :
<h6>cvc-simple-type : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
<h6>cvc-data : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is is not valid with respoct to the corresponding simple type definition.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is associated with invalid data.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item '/:ShipNotice[1]' is not valid with <h6>respect to it's complex type definition..
<h6> -> com.sap.engine.lib.xml.parser.ParserException:
<h6>
<h6>
<h6>I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error <h6>handler logic? Is there any body can make me get out of this?
<h6>Thanks.

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

URGENT: system error - Maual restart possible

Hi Experts,
I'm facing a problem in Xi prodoction. Both inbound and outbound are throwing system error - Maual restart possible. The user is restarting manually in order to post the invoice.
Basically this is retail project, from POS s/w to Xi to SAP R/3. The scenario is file to idoc(inbound) and idoc to file (outbound).
The error is :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML message not found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The acknowledgement error is :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have gone throw the sdn post and blogs but i'm uable to trace the problem.
Kindly suggest me ASAP as this is business critical and posting have been stoped.
Regards,
Pawan

Hi,
Please find the interface determination trace. Hope this will help you to provide some suggestion.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIBGUSER</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPRT2</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPRT2</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 700</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 700</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPRT2</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = XIP</Trace>
<Trace level="3" type="T">client = 600</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIBGUSER</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:02Z UTC-7</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XIP</Trace>
<Trace level="3" type="T">client = 600</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIBGUSER</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - e_solutionsPOS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 2</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) e_solutionsPOS WP_PLU.WP_PLU03</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: WP_PLU.WP_PLU03</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Pavan

Convert application error to system error

Iam facing an issue in BPM, Iam triyng to access to a webservice using synchronous send step, and I ahve an exception branch to catch the syetm error and fault message. Eventhough I specified fault messages, application error was not properly recognized. For this Iam trying to write an adapter module.
In that adapter module I want to access the error in runtime environment, massage the application error look like system error.
Iam lookign for info like, how do I access the error in runtime environment and covert it to look like system error so that BPM could see that as a system error.

Hi Vamsi,
As per my understandiong Application errors different with System errors. so i dont think we can convert application error to system error.
you need to find other way to handle applications error.
Regards,
Raj

Catching an error in SUBMIT Statement

Hi,
I am using SUBMIT (REPORT) and RETURN.
How to catch an error when there is one in the REPORT Program that i am calling.

hi
Calling Programs
If you need to program an extensive application, one single program can become very complex. To make the program easier to read, it is often a good idea to divide the required functions among several programs.
As well as using external modularization, in which you store procedures in special non-executable ABAP programs like function groups, you can also call independent programs from within an ABAP program.
The following ABAP statements allow you to start an executable program or transaction. You can either exit the calling program, or have the system return to it when the called program finishes running.
Executable Program
Transaction
Call without return
SUBMIT
LEAVE TO TRANSACTION
Call with return
SUBMIT AND RETURN
CALL TRANSACTION
You can use these statements in any ABAP program. For example, while processing a user action in the output list of an executable program, you might call a transaction whose initial screen is filled with data from the selected list line.
The event LOAD-OF-PROGRAM is triggered each time a program is called. If a corresponding event block is defined in the framework program, it is executed once before the first other processing block is executed.
An interesting remark at this point is that each execution of an executable program actually has a SUBMIT statement as its source. When you enter the program name in a transaction like SE38 or SA38 and choose Execute, a SUBMIT statement occurs in the transaction. Technically speaking, therefore, executable programs have the attribute of being able to be called using SUBMIT, although their principal characteristic from a useru2019s point of view is that they are started in the foreground.
Memory Organization in Program Calls
The first ABAP program in a session on the application server opens its own internal session (roll area) within the main session. All externally-called procedures run in the same internal session as the calling program, that is, the main program and working data of the procedure are loaded into the same memory area in the internal session.
When you call an executable program or a transaction, the system opens a new internal session for each program. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack. The system can open up to 9 further internal sessions in external program calls.
As well as executable programs and transactions, dialog modules also open a new internal session. Dialog modules were previously used for modularizing screen sequences.
Program Calls and SAP LUWs
An SAP LUW is a logical unit consisting of dialog steps, whose changes are written to the database in a single database LUW. There are various bundling techniques that you can use to ensure that all of the database updates belonging to an SAP LUW are made in the same single database LUW.
Externally-called procedures do not open a new SAP LUW.
However, when you start a new executable program or transaction, a new SAP LUW starts. Database updates belonging to these programs are collected in their own database LUW. If the new program does not return control to the calling program, the SAP LUW of the old program concludes when the new program is called. If, on the other hand, the new program does return control to the calling program, the new SAP LUW runs parallel to the SAP LUW of the calling program.
No new SAP LUW is opened when you call a dialog module. Bundling techniques in a dialog module add the database updates to the database LUW of the calling program. You may sometimes need to call a transaction that runs in the same SAP LUW as the calling program. One technique for doing this is to use the existing transaction as a dialog module. To do this, you need to create a new dialog module with the same main program and initial screen as the transaction. Transactions that are used both as transactions and as dialog modules must be programmed to obey certain rules. For further information, refer to Calling Screen Sequences.
The fact that an external program shares (or does not share) the SAP LUW with its caller has special consequences if the program calls update-task functions or uses COMMIT WORK. For further information, refer to Special LUW Considerations.
syntax:
SUBMIT REPORT01 VIA SELECTION-SCREEN USING SELECTION-SET 'VARIANT1' USING SELECTION-SETS OF PROGRAM 'REPORT00' AND RETURN.

How to catch the error if an RFC fails due to short dump

Hi All,
I was calling the RFC Function module in parallel processing depends on the number of work processors available. I am getting the return message from the Function module using the perform statement
PERFORMING task_return ON END OF TASK
But I am not able to catch the errors if the RFC has been terminated due to the dump or manually killing the RFC while running.
I need how to handle the RFC if the call has been terminated due to the dump or system failure. Does the RFC return the sy-subrc at this time or can we able to catch the error in any other way.
Thanks & regards,
Vijay

Hello Vijay,
If you're calling RFC from outside SAP using the OCX-SAPFunctions-Library, then you can catch the dump or any other exception occuring in your SAP-Function.
Assuming that, objRFCFunc is the RFC-Function you can get the Excepetion-Code through objRFCFunc.Exception.
It returns a String. If the error was a dump, the String is "SYSTEM_FAILURE". If it is a "regular" Exception you'll get the Exceptioncode. E.g. "NO_DATA_FOUND".
If you need any sample code e.g. VBA-code for use in Office-Applications, let me know.
regards
Sven

How to handle the system error messages?

Hi...
I was doing File to RFC scenario with BPM. If i give the correct values for the Bapi Input it is working . If i give the some wrong input to the BAPI, it is not executing and the scenario is stopping. If i click on PE , it is going to the Inbound Queue.
If this type of issue occurs i need to capture the system error and store it in a database. Could you pelase help in this issue.
Thanks,
Leela
Edited by: leelaratnam morampudi on Nov 21, 2008 2:24 PM

Hi Leela,
You need to handle this in BPM. Check the thread describing how to catch exceptions in BPM.
How to handle system errors in XI using BPM? please help!
Thanks!

Catch SAPSQL_INVALID_FIELDNAME error

Hi,
Is it possible to cacht SAPSQL_INVALID_FIELDNAME error ?
When Im trying :
    CATCH SYSTEM-EXCEPTIONS SAPSQL_INVALID_FIELDNAME = 1.
    ENDCATCH.
I got an error that there is no such exception :/
thx for help

If you are in the release 6.10 or higher, try using TRY... CATCH technique and catch the exceptions of CX_SY_SQL_ERROR class. Here is an example from ABAP Help:
PARAMETERS: column TYPE c LENGTH 8,
            value TYPE c LENGTH 30.
DATA spfli_wa TYPE spfli.
DATA cond_syntax TYPE string.
CONCATENATE column '= value'
            INTO cond_syntax SEPARATED BY space.
TRY.
    SELECT SINGLE *
           FROM spfli
           INTO spfli_wa
           WHERE (cond_syntax).
CATCH cx_sy_dynamic_osql_error.
    MESSAGE `Wrong WHERE condition!` TYPE 'I'.
ENDTRY.

I'm wondering..why does the outermost exception always catch the error?

hi
why do sometimes (or everytime) i create a code which looks something like this..
try{
    try{
          //some error here
    } catch (Exception e){
           System.out.println("got it here: " + e.getMessage();
}catch (Exception e){
      System.out.println("got it here instead: " + e.getMessage();
}it's always the outermost catch block caughts the error. In this example the line got it here instead: some error messageis displayed.
I really thought for sure the inner exception is the one who should catch the error first, right? Furthermore they both catch the same thing (Exception).
Any information is greatly appreciated. thanks

No, you're wrong.I'm relieved to hear that. But why does my code always does what I mentioned above? here's my code (it's a partial code, actually. it takes too many lines to put all the codes here):
void generatePIN(String Date){
          char currentCodeChar;
          int seeder=0, serialNumber=0000000;
          int currentNumberInt=0, nextNumber=0, currentCodeInt=0;
          String voucherSerial=null, PINnumber=null, currentNumber=null, currentCode=null, nextCode=null, currentSerial=null, nextSerial=null;
          int PIN1=0,PIN2=0;
          String query=null;
          PreparedStatement ps=null;
          ResultSet rs=null;
          try{
               //this portion here is used for proper seeding random number
               SecureRandom sr1 = SecureRandom.getInstance("SHA1PRNG");
               seeder=sr1.nextInt();
               if (seeder<0){
                    seeder=seeder*-1;
          }catch (Exception e){
               System.out.println(e.getMessage());
               System.exit(1);
          random = new Random(seeder);
          PIN1 = random.nextInt(89999999)+10000000;
          PIN2 = random.nextInt(89999999)+10000000;
          PINnumber = "" + PIN1 + PIN2;
          System.out.println("PIN number: " + PINnumber);
          //check serial number first before storing the pin & serial number in database
          //if serial number exist, regenerate the serial number
          try{
               try{
               query = "select * from data1";
               ps = con.prepareStatement(query);
               rs = ps.executeQuery();
                         while (rs.next()){
                         currentSerial = rs.getString("SerialNo");
               }catch (SQLException ex){
                    System.out.println("error here?" + ex.getMessage());
               while (currentNumberInt<=9999999){
                    currentNumberInt++;
          }catch (Exception e){
               JOptionPane.showMessageDialog(null,"Database error 1: " + e.getMessage());
               return;
     }the database is empty. hence it returns an error when i tried getting some data from it. but i expected the error message should be:
error here? some error message..instead of the
Database error 1: some error message pop-up being displayed.
Did i make any mistake in my code? I've spent hours on this..
thanks for helping

Catch system error

Similar Messages

Maybe you are looking for