Catch the Tab Switch Event

Hi All,
I have a few tabs in my OAF page. I would like to capture the event when the user switches between tabs.
Could anyone please tell me the code in processFormRequest ?
Thanks
Ponraj

Hi Gaurav,
I have a few tabs, each of them have a shuttle region. I shuttle some items in each of the shuttle regions available list to selected list.
But when i submit in the end, the selected values are visible only for the tab from which i click on the submit button.
But the values are retained in the selected lists of all the tabs if I walk through them and even after refresh. My plan is to keep them in a datastructure whenever user navigates between tabs and use that datastructure in the final submit to retrieve the selected values of all the shuttle regions.
Hope you understood the problem
Thanks
Ponraj

Similar Messages

How to catch IE7 tab change event in Java Applet?

My applet have some modeless dialogs, When I start my applet with modeless dialog in tab1, if I swith to tab2, the modeless dialog of tab1 remains open.
So I want to catch the tab change event, and set modeless dialog invisible when tab changes.
Who knows the solutions.... Thanks

To get to the IE7 browser, you'll have to go through JNI if you're using Java to get to a C level interface. You'll have to write the code to interface to it also. IE7 does not have a Java interface, inface, MS has a vested interest in not supporting a Java interface. You'll have to look up the IE7 developers docs to see the OLE interface you'll have to hit.

Why i am unable to catch the 'TAB' key press?

hi
i have an application where i have 2 text fields and one button in order say t1, t2 and b1.
on tabbing t1 cursor moves to t2 and on tabbing t2 cursor moves to b1 and on tabbing b1 cursor moves to t1.
now when i press tab button on any of the component i have written a keyListener for that to catch 'TAB' key using the comparision
if( e.getKeyCode() == KeyEvent.VK_TAB )
but its not catching the tab key pressed on any of these 3 components....
why like this...
i want to catch the press of 'TAB' key and write some action for it... but unable to catch the 'TAB' key press.
anyone could help me in this....
thanx in advance,
-Soni

I seem to remember this question being asked before. I think the answer was that the FocusManager intercepts the TAB key. I don't remember the solution but you can try searching the forum.

Why can not catch the standard BACK event in ALV's USER_COMMAND event,

Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
 I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
 IT_FIELDCAT = G_TAB_FIELDCAT
 IT_SORT = G_TAB_SORT_INF
 I_SAVE = G_CON_U
*<<<Liang
 IT_EVENTS = G_TAB_ALV_EVENTS
*<<<Liang
 TABLES
 T_OUTTAB = G_TAB_OUTPUT_DATA
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
*& Form F_USER_COMMAND
 ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
 LEAVE TO SCREEN 0.
ENDIF.
ENDFORM. " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??

hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
 S_AUFNR FOR RESB-AUFNR," Order number
 S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
 AUFNR LIKE RESB-AUFNR, " Order number
 MATNR LIKE RESB-MATNR, " Material
 BDMNG LIKE RESB-BDMNG, " Requirements in UM
 MEINS LIKE RESB-MEINS, " Unit of Measure (UM)
 ERFMG LIKE RESB-ERFMG, " Requirements in UE
 ERFME LIKE RESB-ERFME, " Unit of Entry (UE)
 MAKTX LIKE MAKT-MAKTX, " Mat. description
 END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
 FORM INITIALIZE_FIELDCAT *
--> P_TAB *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form GET_ORDERS
 text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
 FROM RESB
 APPENDING TABLE OUT
 WHERE XLOEK EQ SPACE " deletion indicator
 AND XWAOK EQ 'X' " goods movement indicator
 AND WERKS IN S_WERKS " plant
 AND BDTER IN S_BDTER " req. date
 AND AUFNR IN S_AUFNR. " pr. order
ENDFORM. " GET_ORDERS
*& Form GET_MATERIAL_DESCRIPTION
 text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
 SELECT SINGLE MAKTX
 INTO OUT-MAKTX
 FROM MAKT
 WHERE MATNR EQ OUT-MATNR
 AND SPRAS EQ 'EN'.
 MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM. " GET_MATERIAL_DESCRIPTION
 FORM TOP_OF_PAGE *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001. " Plant:
IF S_WERKS-HIGH NE SPACE.
 WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
 LOOP AT S_WERKS.
 WRITE: S_WERKS-LOW.
 ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
 WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002. " Order:
IF S_AUFNR-HIGH NE SPACE.
 WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
 LOOP AT S_AUFNR.
 WRITE: S_AUFNR-LOW.
 ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
 WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM. " Date:
third line
WRITE:/ TEXT-003. " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
 WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
 LOOP AT S_BDTER.
 WRITE: S_BDTER-LOW.
 ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
 WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO. " Page:
ENDFORM. " TOP_OF_PAGE
 FORM END_OF_LIST *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021. " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031. " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012. " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012. " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM. " END_OF_LIST
*& Form WRITE_USING_ALV
 text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = REPNAME
 I_INTERNAL_TABNAME = 'OUT'
 I_INCLNAME = REPNAME
 CHANGING
 CT_FIELDCAT = FIELDTAB.
IF SY-SUBRC <> 0.
 WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = REPNAME
 i_callback_pf_status_set = 'PF_STATUS_SET'
 i_callback_user_command = 'USER_COMMAND'
 I_STRUCTURE_NAME = 'OUT'
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FIELDTAB
 I_DEFAULT = 'A'
 I_SAVE = G_SAVE
 IS_VARIANT = G_VARIANT
 IT_EVENTS = EVENTS[]
 IS_PRINT = PRINTS
 TABLES
 T_OUTTAB = OUT.
IF SY-SUBRC <> 0.
 WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM. " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
 HEADING TYPE SLIS_T_LISTHEADER,
 LAYOUT TYPE SLIS_LAYOUT_ALV,
 EVENTS TYPE SLIS_T_EVENT,
 REPNAME LIKE SY-REPID,
 F2CODE LIKE SY-UCOMM VALUE '&ETA',
 PRINTS TYPE SLIS_PRINT_ALV,
 TITLE(40) TYPE C,
 G_SAVE(1) TYPE C,
 G_EXIT(1) TYPE C,
 G_VARIANT LIKE DISVARIANT,
 GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
 FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
 FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
 FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
 FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
 FORM MAIN_STATEMENTS *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*& Form INITIALIZE_FIELDCAT_SAMPLE
 THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
 -->P_FIELDTAB[] text *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT. " Always clear before use
CAT-TABNAME = 'I'. " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'. " Name of your field in the itable.
CAT-COL_POS = 1. " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'. " Next field
CAT-COL_POS = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'. " and the next
CAT-COL_POS = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'. " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'. " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM = 'X'. " You want totals calculated.
CAT-NO_OUT = 'X'. " and hidden.
APPEND CAT TO P_TAB.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form BUILD_EVENTTAB
 THIS IS THE SAME FOR ALL THE PROGRAMS
 -->P_EVENTS[] text *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
 APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
 APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
 APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
 APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
 APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENTTAB
*& Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
 -->P_HEADING[] text *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
 TEXT(60) TYPE C,
 SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM. " BUILD_COMMENT
*& Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 I_SAVE = G_SAVE
 CHANGING
 CS_VARIANT = GX_VARIANT
 EXCEPTIONS
 NOT_FOUND = 2.
IF SY-SUBRC = 0.
 P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " INITIALIZE_VARIANT
*& Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
 MOVE G_VARIANT TO GX_VARIANT.
 MOVE P_VARI TO GX_VARIANT-VARIANT.
 CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
 EXPORTING
 I_SAVE = G_SAVE
 CHANGING
 CS_VARIANT = GX_VARIANT
 EXCEPTIONS
 WRONG_INPUT = 1
 NOT_FOUND = 2
 PROGRAM_ERROR = 3.
 IF SY-SUBRC EQ 0.
 G_VARIANT = GX_VARIANT.
 ELSE.
 PERFORM INITIALIZE_VARIANT.
 ENDIF.
ELSE.
 PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
*& Form F4_FOR_VARIANT
 text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 IS_VARIANT = G_VARIANT
 I_SAVE = G_SAVE
 IMPORTING
 E_EXIT = G_EXIT
 ES_VARIANT = GX_VARIANT
 EXCEPTIONS
 NOT_FOUND = 2.
IF SY-SUBRC = 2.
 MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
 IF G_EXIT = SPACE.
 P_VARI = GX_VARIANT-VARIANT.
 ENDIF.
ENDIF.
ENDFORM. " F4_FOR_VARIANT
*& Form BUILD_LAYOUT
STANDARD LAYOUT
 -->P_LAYOUT text *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE = F2CODE.
P_LAYOUT-ZEBRA = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM. " BUILD_LAYOUT
 FORM BUILD_PRINT *
STANDARD PRINT OPTIONS *
--> P_PRINT *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM. " BUILD_PRINT
 FORM PF_STATUS_SET *
NAME YOUR STATUS ALV. IF YOU NEED IT.. *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM. " PF_STATUS_SET
 FORM USER_COMMAND_SAMPLE *
--> UCOMM *
--> SELFIELD *
FORM USER_COMMAND_SAMPLE USING UCOMM LIKE SY-UCOMM
 SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
 WHEN 'MSXL'. " Export to Excel
 perform set_excel_export.
 CLEAR UCOMM.
 WHEN 'MM03'.
 set parameter id 'MAT' field selfield-value.
 call transaction 'MM03' and skip first screen.
 CLEAR UCOMM.
 WHEN 'BGR1'.
 perform fill_available.
 perform graph_available.
 CLEAR UCOMM.
 WHEN 'DOCU'.
 call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM. " USER_COMMAND
*& Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
 exporting
 i_program_name = repname
 i_internal_tabname = 'I'
 i_inclname = repname
 changing
 ct_fieldcat = fieldtab.
if sy-subrc <> 0.
 write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
 exporting
 i_callback_program = repname
 i_callback_pf_status_set = 'PF_STATUS_SET'
 i_callback_user_command = 'USER_COMMAND'
 i_structure_name = 'I'
 is_layout = layout
 it_fieldcat = fieldtab
 i_default = 'A'
 i_save = g_save
 is_variant = g_variant
 it_events = events[]
 is_print = prints
 tables
 t_outtab = i.
if sy-subrc <> 0.
 write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM. " WRITE_USING_ALV
thanks
mrutyun^

Capturing the TAB key event.

How can I capture the TAB key event?
I am trying to use it within a JTextField to do a normal text tab operation.
Thanks,
D

I want to map the Tab key to a jTextField so that when the user is editing inside the jTextField they can press the TAB key to tab over a predefined number of characters.
Thanks,
D

How do I catch the button click event from toolbar for my JSP?

I am using JDev 3.2 and BC4J for my JSP. I am using data web bean methods to create my JSPs. I need to implement a
master-detail relation in my JSP. Currently I put my master browser as the top frame of JSTabContainer bean and put my
6 detailed tables into 6 tabs. I found that when I click the next or previous button of toolbar of master frame, the detail tab
does not display the corresponding detail data properly. I think the reason is that I did not refresh the tab content when
the user change the current record of master table. Now my question is that how do I catch those events so that I can
refresh the content of my detail table? Or whatever suggestion can make this work.
Thanks,
Lisa

You posted here with Firefox 17.0.1.
Try running a Norton Live Update so Norton can update their Firefox add-on and get that Toolbar working again.
That said, Norton doesn't do anything about Malware. You need a Malware application to locate and remove Malware.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://windows.microsoft.com/en-US/windows7/products/features/windows-defender] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

How can i catch the jsp checking event ?

As we know, there are three parameters which is about checking in the weblogic.xml, pageCheckSeconds,*servlet-reload-check-secs*,*resource-reload-check-secs*, but how can i catch the checking event when the webapp is active.
The fellowing is my simple test, i deployed a webapp on a weblogic server instance, and it was actived. I wrote a simple bash shell to try to catch the event, but fail. i througnt it may be dependent on the webapp's stage mode. but i change the mode, and try again, it was fail too.
[weblogic@tdy218 ~]$ ls
getLastAccessTime.sh webapps
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
[weblogic@tdy218 ~]$ stat
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
File: `/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp'
Size: 634 Blocks: 8 IO Block: 4096 regular file
Device: 804h/2052d Inode: 583725 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 502/weblogic) Gid: ( 500/ bea)
Access: 2011-05-22 11:11:37.000000000 +0800
Modify: 2010-05-24 14:49:08.000000000 +0800
Change: 2011-05-22 11:10:21.000000000 +0800
The jsp file's last access time didn't changed in the past.
[weblogic@tdy218 ~]$ more getLastAccessTime.sh
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 3
done
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 8.1//EN" "http://www.oracle.com/technology/weblogic/servers/wls810/dtd/weblogic810-web-jar.dtd">
<weblogic-web-app>
<jsp-descriptor>
<jsp-param>
<param-name>pageCheckSeconds</param-name>
<param-value>2</param-value>
</jsp-param>
</jsp-descriptor>
<container-descriptor>
<servlet-reload-check-secs>2</servlet-reload-check-secs>
<resource-reload-check-secs>2</resource-reload-check-secs>
</container-descriptor>
<context-root>/jdbc</context-root>
</weblogic-web-app>
env :
WebLogic 9.2 MP4、Redhat Linux AS 4 Update 8 x86.

I tested on WLS 11g ps2(10.3.3) which is running in Development Mode also, but it was the same as WLS 9.2 MP4.
During the weblogic server running, it don't check the application resources , but it will check the $Domain_Home/autodeploy directory every three seconds in Development Mode , the following is the result.
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh /bea/wls924/user_projects/domains/base_domain/autodeploy
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:52.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/
insert.jsp login.jsp query.jsp tdy218.sql WEB-INF/
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
Ctrl + ^
I set the frequency to every one seconds this time by using sleep method in my Bash Shell script.
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 1
done

Catching the browser close event...

Hello Fellow Portal-Heads,
There's a nagging issue that I've been pondering (RE EP6 NW04). In the MSS iViews there is the potential issue of a user viewing an employee and then closing the browser via the 'X' (vs. clicking the logoff link). This 'X-ing' out of the browser leaves the viewed employee locked which is to be expected. So... anyone have a good way to catch the 'X-ing' out of the browser and then trigger some code to perform a proper logoff? I've tried inserting code in the masthead which catches a browser unonload() event... but it was not the smoothest operator.
Cheers,
Mike
Message was edited by: Mike Yang

Hi Mike,
I have got a chance to work in a similar issue.The following code traps the 'X' of the browser and logoff the user.
<script type="text/javascript">
window.onunload = function unloadEvent()
 if (gIsPreviewMode)
 return;
 else
 if(window.screenLeft < 10004)
 //this is refresh
 else
 logoff();
</script>
Preview is taken care and the code is working fine. I am posting code so that somebody else can use it,
Regards
Message was edited by: Rem Swa
This is for EP6 SP2

Adf javascript clientlistener not capturing the TAB keypress event

Hi,
I have client listener attached to a text field to trap the keyPress event. The method is being called for all the key strokes except special keys like TAB, arrow keys, pageup, pagedown etc. Is there any possibility to capture TAB key event.
<af:clientListener method="myFunctionTosetFocus"
type="keyPress"/>
function myFunctionTosetFocus(event) {
alert('function called....')
var keyCodePressed = event.getKeyCode();
if(keyCodePressed == AdfKeyStroke.ENTER_KEY || keyCodePressed == AdfKeyStroke.TAB_KEY) {
alert('Do some thing here....')
I can see both the alert messages when I click on the ENTER key. But I cannot see both the alert messages when I cick on TAB key. The same is working without any problems in firefox.
Thanks and Regards,
S R Prasad

Hi Frank,
I tried with the event.cancel(). Now I can see the event.cancel() working for ENTER key, But not for the TAB key. I tried with the keyDown event in the clientListener and it is working with out any problems in both IE and firefox.
It is not working as expected in case of keyUp event, If I set the focus to the next tab in the clientListener code, it is executing the clientListener of the destination component if the clientListener event is keyUp.
Overall it is wotking as expected with the keyDown, But it is not working for the keyUp and keyPress events. All these are working as expected in firefox.
Thanks and Regards,
S R Prasad

Catch the tab keyevent??

import java.awt.Component;
import java.awt.GridLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class MainFrame{
 public MainFrame(){
 public MainFrame(String name){
 show(name);
 Component component=null;
 public void show(String name){
 JFrame jf=new JFrame("Name :" + name);
 JPanel panel = new JPanel();
 panel.setLayout(new GridLayout(3,3));
 for (int i = 0; i < 8; i++) {
 final JButton button = new JButton("" + i);
 button.setActionCommand(""+i);
 button.setName("" + i);
 button.addKeyListener(new java.awt.event.KeyAdapter() {
 public void keyPressed(java.awt.event.KeyEvent e) {
 tabpressed(e);
 panel.add(button);
 jf.add(panel);
 jf.setSize(300, 200);
 jf.setVisible(true);
private void tabpressed(java.awt.event.KeyEvent evt) {
 System.out.println(evt.getKeyCode());
//IF "TAB" KEY PRESSED THAN PRINT
// HOW I CAN CHECK THIS
 public static void main(String args[]) {
 new MainFrame().show("Main");
i want to check in the tabpressed() method for "tab" key press
how i can check it?
when i press tab in the button no output is shown.

You have to turn off the tab key as the focus manager's forward traversal key. Add this line to your code and see what happens. Note that of necessity, tab will lose it's "tab" functionality:
 JFrame jf = new JFrame("Name :" + name);
 JPanel panel = new JPanel();
 // add these lines below:
 panel.setFocusTraversalKeys(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS,
 Collections.EMPTY_SET);
 panel.setLayout(new GridLayout(3, 3));

How to make the TAB Key Event called

Hi ,
I want to make the tab key called twice when I hit on a button. It should jump to the next 2 cell.
Thanks.
DT

Here's a couple related threads
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=583877
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=712386
I'd also suggest exploring the Search Forums available on the left,
which is how I found those threads:
http://onesearch.sun.com/search/onesearch/index.jsp?qt=focus+traversal+tab+text&subCat=siteforumid%3Ajava57&site=dev&dftab=siteforumid%3Ajava57&chooseCat=javaall&col=developer-forums

Catching the Record Change Event

Hello,
We are currently using SAP 2004, and would like to catch an event when a sap record changes, for example in Item Master Data window when the user clicks on the << < > >> and the Item Number/ Information changes. From what I can tell there is no specific form event that can be caught like on item number text change
Any help with this problem would be greatly appreciated
Thanks

Hi Bill,
Unfortunately, there is not a "record change".
You'll have to catch all the menu event when the user click on the << < > >>
Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
 If pVal.BeforeAction = False Then
 Select Case pVal.MenuUID
 Case "1288" 'Next Record
 oRecordSet.MoveNext
 '// If reached EOF show last
 If oRecordSet.EOF = True Then
 oRecordSet.MoveLast
 End If
 Case "1289" 'Previous record
 Case "1290" 'First record
 Case "1291" 'Last record
 End Select
 End If
End Sub

Catch the keydown event in matrix

Dear all,
In matrix I have 2 cols (Code, FullName). In Col with name 'Code' have formated search to search Employee Code. Now i want to catch the tab key when user leave the col 'Code' I will call a function to get Fullname to assign to col 'FullName'. I tried use formated search for this case but inactive so I must use this solution.
Please help me for this problem.
Thanks

Hi,
You can trap the Validate event on your form and then filter to check if the item UID is your matrix and the column is your code column. If the ItemChanged property is true then run your code to retrieve the name and populate the other column for the current row.
Kind Regards,
Owen

Catch the onClick event on Interactive Report to access columns content

Hi,
I am using Apex 4
I would like to display some rows into an interactive report. I have define a dynamic action on that report in order to catch the Mouse OnClick Event.
The Goal is to display the detail of the row in a form region in the sidebar.
To do this, I would like to get the content of a column of the row clicked and then execute a pl/sql block to get the detail of my row.
I am stuck to get the content of the column I have clicked within the dynamic action to pass it to execute the pl/sql block.
Any idee?
Many thanks
jko
Edited by: user617942 on 29-Jul-2010 04:19

Hello,
Did I ask something stupid :-)
Jko
Edited by: user617942 on 29-Jul-2010 04:19
Edited by: user617942 on 29-Jul-2010 08:34

How to catch the ApplicationStart event??

how to catch the application start event??
i want to do some actions (Java code) that will be run once when the application started
this like ApplicationStart event in ASP.NET
how ???

Google for javax.servlet.ServletContextListener. You need to write a class that implements this interface and register it in web.xml.
Please ask questions like this in the JDeveloper or OC4J forum since they are not related to JHeadstart.
Steven Davelaar,
JHeadstart Team.

Catch the Tab Switch Event

Similar Messages

Maybe you are looking for