Catch weight management. AUM in WM reports

Hello experts,
i can't view alternative unit of measure in standard report of SAP (ls24, ls26) I have installed the last package of CWM and my parallel unit of measure is the same as my wm unit!
Anyone know if itu2019s possible to see this units in reports??
Thanks!!

someone??

Similar Messages

Catch Weight Management Activation Dilemma

Hello experts,
We're looking into activating Catch Weight Management in our development client or a sandbox client. We have read the documentation available, but we have found what seems to be either a "contradiction" in the documentation, or a "misunderstanding" on our side. It is probably just a misunderstanding on our side, so we would appreciate some clarification on this.
The following link says that: Note that this activation affects all clients and that you cannot reverse the characterization of the ERP system as SAP CWM.
Activation of SAP Catch Weight Management - SAP Catch Weight Management - SAP Library
This other link says that: Before you can use SAP Catch Weight Management (SAP CWM), you must activate SAP CWM at client level.
Activating SAP Catch Weight Management - SAP Catch Weight Management - SAP Library
The questions is: Can we activate CWM in our development client or a sandbox client without affecting the other clients (QA and Production)?
This is a big irreversible change, that's why we need proper clarification before we make a change.

Hi Oscar,
When you activate CWM, it will strip your ERP of some reports, t-codes, and functionality.
You choose on material level if material is standard or CWManaged.
To answer your question, it is implemented on Client level, and you assign the indicator for CWM on material level. You need to maintain CWM view.
In addition please read SAP Note 886761. It tells you what major changes/retrictions are implemented after CWM activation.
Also, if you are using RF devices in WM, and you want to process CWM materials through RF too, you will need to implement this - SAP note 738159 : Catch Weight with Radio Frequency.
It isn't that easy to do that, but after implementing the changes, you will have screens for CWM on your RF devices.
Otherwise, you would always get an error that you need to enter the qty in parallel unit of measure...
Please read this thoroughly, it will help you catch up wth CWM
http://fmis.minfin.bg/help/EN/50/f4383fdb800804e10000000a114084/frameset.htm
Regards,
Mihailo

Catch Weight Management - CWM: Classic Accounting VS Inventory Accounting

Hello dear experts,
The info below was extracted from this link: SAP Catch Weight Management - SAP Library
The link says:
To implement SAP CWM, you need the following components:
· SAP ERP Central Component (SAP ECC)
· LIME as a component of SAP AP (for inventory management)
· Inventory Accounting based on SAP SEM
After you have installed the components you must activate the SAP CWM solution at client level.
I understand that you have to "install" LIME and Inventory Accounting in order to activate CWM, but my question is:
Do we have to "implement/use" Inventory Accounting in order to use CWM? or is Inventory Accounting just an option that is offered with CWM and the only requirement is to "install it but not necessarily implement/use it"?
We are currently operating under Classic Accounting and we would like to stay like that for the moment, but we would also like to implement CWM, so we're looking for some guidance.
Can we use Classic Accounting and CWM together?
This is the last piece of info we need before we make a decision as to whether or not to implement CWM.

Hi
You cannot user REM for CWM material types. For others you can stil use.
Regards
Yatin Thakkar

Catch Weight Management UD

Hi gurus.
I'm trying to post stock to unrestricted from giving usage decision to various inspection lots, but I simply can't. When I try to save the UD, the next message appears:
Material 100003 is not a catch weight material
Message no. /CWM/MD009
There are catch weight materials and non catch weight as well, does this mean that I can't have QM inspections in all material types? There wasn't any problem with creation of inspection plan or inspection setup at any moment.
Thanks in advance for you help.
Arturo

1)It happens with status
INSP RREC SPRQ
and
REL CALC SPRQ
2)The quantity in QA02 is 300 UN.
The quantity to post in unrestricted is also 300 UN.
We just found the note 1490528:
"When determining conversion factors using alternative units of measure from
the material master, the system does not take into account that Catch
Weight Management (CWM) is activated. As a result, following the processing
of the load file, there are times when you may receive the message
/CWM/MD009 "Material _ is not a catch weight Material."."
I'll let you know if this helped.
Greetings.

Sap Catch Weight Management Ver 2.0

Is any body is having information about Sap Catch Weight Management Ver 2.0.
Currently we are using 5.0 ECC NetWeaver.
Is it possible we can get patch of Sap Catch Weight Management Ver 2.0.

No there is no patch available. You will have to have ECC 600 to have CWM 2.0.
For additional details, refer to note 834585 for installing IS-CWM 200. Hope this helps !!

Deactivate catch weight management

Dear Sir,
I have wronly activated "catch weight management" with following steps.
SPRO -> Activate SAP ECC Extensions -> /CWM/BF
as mentioned above componenent I have made it enable is there any procedure we can male it disbale again or deativate this component.
Dinesh

Hi
you cannot reverse once the CWM is active in the system. Please go through the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/8b/89143f81208536e10000000a114084/frameset.htm
Regards
Yatin Thakkar

Activationof Catch Weight Management

Hi Gurus,
Can we activate Catch Weight Management (CWM) with ECC 6.0? Is it free of cost or SAP will charge for this CWM.
If anyone worked with CWM, pl give your details then we will contact you. We would like to implement CWM to Slaughter house.
Best inputs will be rewarded.
Thanks & Regards,
Surya
9000440032.

Hi,
SAP CWM provides processes and functions to allow materials to be carried in two independent units of measure throughout the entire supply chain (sales and distribution, purchasing, materials management, production, quality management and logistics execution). SAP CWM also contains costing and inventory management functions and supports integration of Financial Accounting and Controlling, allowing you to map requirements in the valuation area.
Plz refer the following link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8f/89143f81208536e10000000a114084/frameset.htm
Also refer this link,
[SAP Catch Weight Management|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/805f5ed2-8116-2a10-b8ac-916f46de6546]
SAP Catch Weight Management is for Meat / Diary Industry. vist the below link for details
http://www12.sap.com/community/showdetail.epx?ItemID=8909
Regards,
R.Brahmankar

Catch weight management

Dear MMians,
If i want to deactivate the catch wt managed matl what r all things to be done?
pl reply
i will ensure zero stock
i need master data settings
pl reply
guru

Hi Prakash,
The following information might br helpful for you.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/a7a842734eb611e10000000a155106/frameset.htm
www.sap.com/community/showdetail.epx?ItemID=8909
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/805f5ed2-8116-2a10-b8ac-916f46de6546
www50.sap.com/businessmaps/DD98FA514DD44CD58502A8A84EDDCF45.htm
Thanks and Regards,
Naveen Dasari.

SAP Catch Weight Management - Business Functions (SAP Enhancement Package 5 for SAP ERP 6.0) - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

the EHP2 is now running on my system:
For the installation on SAP NetWeaver 7.0:
FINBASIS 602 CSR0120031469_0027395.PAT
SEM-BW 602 CSR0120031469_0027396.PAT
all informations can be found in:
1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0

IS Catch Weight Management vs. REM

Hi,
Note 1180040 says that repetitive manufacturing is not supported in CWM. Does that mean that you can't use REM at all or can I still use REMfor materials which are not CWM enabled.
Any experiences?
thanks,
-simo

Hi
You cannot user REM for CWM material types. For others you can stil use.
Regards
Yatin Thakkar

Have a error when active Catch Weight Managerment

I have a DEV server ( oracle 10.2 g, SAP ECC 6.0 SR3) with 3 software component : SAP_APPL, SEM-BW, IS-CWM is not the same level. I want to test function Catch Weight Management in client 100 of system and I have two case
Case 1:
I update 3 software component above the same level to active Catch Weight Management with Tcode SFW5 and SPRO -> active OK . But my system is freshly. Therefore, i don't have any configuration to demo -> I don't like this case
Case 2
With purpose to have configuration to demo
I decide to take configuration of client 101 from another DEV system ( this client 101 is actived Material Ledger) by export / import client with Tcode SCC8 and SCC7
Then I import configuration of client 101 into client 100
After import into client 100 successfully and I have a client 100 which configured. Then I active function Catch Weight Management with Tcode SFW5 and SPRO ( I updated 3 software component above the same level too) -> Not Active
-> the system check compatible and have a error :
"Error in component Inventory Accounting (ACC-INV) SEM BW "
"Inventory Accounting cannot be actived : material ledger is actived "
My question : I don't understand above errors while I do right
Please help me on this issue
Thanks in advance

hi
To activate catch management there should not abe any stock, and material price should be S and material ledgerr should not be active.
Hope this will help you..

Solution Manager 4.0 BI Reporting Content for SP13

Hi,
I'm looking for a listing of BI Reporting Content for Solution Manager 4.0 SP13. I've heard rumors that standard BI Reporting content exists for the Change Request Management and Service Desk domains, but all I can find are references for system and performance report content for SP12.
See the matrix of content listed in help.sap.com at this url... <a href="http://help.sap.com/saphelp_sm40/helpdata/en/44/1ed74368b66491e10000000a1553f7/content.htm">SP12 SolMan BI Reporting Content from help.sap.com</a>
Any guidance for standard BI reporting content for SolMan Change Request Management or Service Desk domains would be appreciated.
Thanks,
Josh

I was on session LCM264 - Reporting and Performance Analysis Using SAP NetWeaver BI at TechED and there was no talking about Change Request Management or Service Desk reporting.... This doesn't mean it's not available but I have never heard about it...
I'm setting up Performance Analysis right now and it is working really fine.
/Mikael

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

Issue with Cash Management and liquidity forecast report

Hello folks,
I am working with cash management and liquidity forecast reports. While running the report for Cash management, as I drill down to planning levels and induvidual GL accounts for the bank accounts, the figures for GL acounts in report does not tally with actual GL balances. As I drill down to last level, it shows the GL balance display which is different from the values in the report. Can anyone tell me why it does not pick up certain values. I find that certain document type "DZ" values are not picked up by the report. Any suggestions?
Also, I would like to know is there any way to cross check the values in Liquidity forecast report for sales orders, purchase orders and requisitons through any other report in MM and SD. Would appreciate if someone can respond to mu query.
Thanks in advance,
-NK-

In se38, look for programs starting with RFFD*; there are a few for reconciliation of cash management with SD/MM/GL etc.

Clear Cluster Managed Database Service alert report as being down

I had a Database Initialization Parameter - service_name defined - eg. bamsd - which has since been removed from the Initialization Parameter.
Since it has been removed, Oracle Enterprise Manager Grid Control is reporting a Service Staus alert of "Service bamsd is Down.".
How do I remove this alerting (or where is it coming from)?
I have gone into the alert and tried acknowledging it and tried to 'Reevaluate Alert', but this alert remains.
I have also gone into the Cluster Managed Database Services (Availability tab in EM), thinking that the alerting and definition of this service may be coming from here, but it reports that there are no services defined for the database (as I'd expect).
Anyone able to offer assistance, or point me in the right direction of an appropriate manual?
(This alert is not affecting anything, it is just a tidy up task to try to clear some Critical alert occurences, which I believe should not be showing)
Thanks in anticipation.

The problem is being caused by the service being registered into table sys.service$ on target database but not marked as deleted afterwards. To get rid of it just run command:
SQL> execute dbms_service.delete_service('bamsd');
It will fill in deletion_date column in table. Reevaluate the alert in Grid Control and it will be cleared.
Regards

Catch weight management. AUM in WM reports

Similar Messages

Maybe you are looking for