Catch Weight Management UD
Hi gurus.
I'm trying to post stock to unrestricted from giving usage decision to various inspection lots, but I simply can't. When I try to save the UD, the next message appears:
Material 100003 is not a catch weight material
Message no. /CWM/MD009
There are catch weight materials and non catch weight as well, does this mean that I can't have QM inspections in all material types? There wasn't any problem with creation of inspection plan or inspection setup at any moment.
Thanks in advance for you help.
Arturo
1)It happens with status
INSP RREC SPRQ
and
REL CALC SPRQ
2)The quantity in QA02 is 300 UN.
The quantity to post in unrestricted is also 300 UN.
We just found the note 1490528:
"When determining conversion factors using alternative units of measure from
the material master, the system does not take into account that Catch
Weight Management (CWM) is activated. As a result, following the processing
of the load file, there are times when you may receive the message
/CWM/MD009 "Material _ is not a catch weight Material."."
I'll let you know if this helped.
Greetings.
Similar Messages
-
Catch Weight Management - CWM: Classic Accounting VS Inventory Accounting
Hello dear experts,
The info below was extracted from this link: SAP Catch Weight Management - SAP Library
The link says:
To implement SAP CWM, you need the following components:
· SAP ERP Central Component (SAP ECC)
· LIME as a component of SAP AP (for inventory management)
· Inventory Accounting based on SAP SEM
After you have installed the components you must activate the SAP CWM solution at client level.
I understand that you have to "install" LIME and Inventory Accounting in order to activate CWM, but my question is:
Do we have to "implement/use" Inventory Accounting in order to use CWM? or is Inventory Accounting just an option that is offered with CWM and the only requirement is to "install it but not necessarily implement/use it"?
We are currently operating under Classic Accounting and we would like to stay like that for the moment, but we would also like to implement CWM, so we're looking for some guidance.
Can we use Classic Accounting and CWM together?
This is the last piece of info we need before we make a decision as to whether or not to implement CWM.Hi
You cannot user REM for CWM material types. For others you can stil use.
Regards
Yatin Thakkar -
Sap Catch Weight Management Ver 2.0
Is any body is having information about Sap Catch Weight Management Ver 2.0.
Currently we are using 5.0 ECC NetWeaver.
Is it possible we can get patch of Sap Catch Weight Management Ver 2.0.No there is no patch available. You will have to have ECC 600 to have CWM 2.0.
For additional details, refer to note 834585 for installing IS-CWM 200. Hope this helps !! -
Deactivate catch weight management
Dear Sir,
I have wronly activated "catch weight management" with following steps.
SPRO -> Activate SAP ECC Extensions -> /CWM/BF
as mentioned above componenent I have made it enable is there any procedure we can male it disbale again or deativate this component.
DineshHi
you cannot reverse once the CWM is active in the system. Please go through the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/8b/89143f81208536e10000000a114084/frameset.htm
Regards
Yatin Thakkar -
Activationof Catch Weight Management
Hi Gurus,
Can we activate Catch Weight Management (CWM) with ECC 6.0? Is it free of cost or SAP will charge for this CWM.
If anyone worked with CWM, pl give your details then we will contact you. We would like to implement CWM to Slaughter house.
Best inputs will be rewarded.
Thanks & Regards,
Surya
9000440032.Hi,
SAP CWM provides processes and functions to allow materials to be carried in two independent units of measure throughout the entire supply chain (sales and distribution, purchasing, materials management, production, quality management and logistics execution). SAP CWM also contains costing and inventory management functions and supports integration of Financial Accounting and Controlling, allowing you to map requirements in the valuation area.
Plz refer the following link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8f/89143f81208536e10000000a114084/frameset.htm
Also refer this link,
[SAP Catch Weight Management|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/805f5ed2-8116-2a10-b8ac-916f46de6546]
SAP Catch Weight Management is for Meat / Diary Industry. vist the below link for details
http://www12.sap.com/community/showdetail.epx?ItemID=8909
Regards,
R.Brahmankar -
Catch Weight Management Activation Dilemma
Hello experts,
We're looking into activating Catch Weight Management in our development client or a sandbox client. We have read the documentation available, but we have found what seems to be either a "contradiction" in the documentation, or a "misunderstanding" on our side. It is probably just a misunderstanding on our side, so we would appreciate some clarification on this.
The following link says that: Note that this activation affects all clients and that you cannot reverse the characterization of the ERP system as SAP CWM.
Activation of SAP Catch Weight Management - SAP Catch Weight Management - SAP Library
This other link says that: Before you can use SAP Catch Weight Management (SAP CWM), you must activate SAP CWM at client level.
Activating SAP Catch Weight Management - SAP Catch Weight Management - SAP Library
The questions is: Can we activate CWM in our development client or a sandbox client without affecting the other clients (QA and Production)?
This is a big irreversible change, that's why we need proper clarification before we make a change.Hi Oscar,
When you activate CWM, it will strip your ERP of some reports, t-codes, and functionality.
You choose on material level if material is standard or CWManaged.
To answer your question, it is implemented on Client level, and you assign the indicator for CWM on material level. You need to maintain CWM view.
In addition please read SAP Note 886761. It tells you what major changes/retrictions are implemented after CWM activation.
Also, if you are using RF devices in WM, and you want to process CWM materials through RF too, you will need to implement this - SAP note 738159 : Catch Weight with Radio Frequency.
It isn't that easy to do that, but after implementing the changes, you will have screens for CWM on your RF devices.
Otherwise, you would always get an error that you need to enter the qty in parallel unit of measure...
Please read this thoroughly, it will help you catch up wth CWM
http://fmis.minfin.bg/help/EN/50/f4383fdb800804e10000000a114084/frameset.htm
Regards,
Mihailo -
Dear MMians,
If i want to deactivate the catch wt managed matl what r all things to be done?
pl reply
i will ensure zero stock
i need master data settings
pl reply
guruHi Prakash,
The following information might br helpful for you.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/a7a842734eb611e10000000a155106/frameset.htm
www.sap.com/community/showdetail.epx?ItemID=8909
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/805f5ed2-8116-2a10-b8ac-916f46de6546
www50.sap.com/businessmaps/DD98FA514DD44CD58502A8A84EDDCF45.htm
Thanks and Regards,
Naveen Dasari. -
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.the EHP2 is now running on my system:
For the installation on SAP NetWeaver 7.0:
FINBASIS 602 CSR0120031469_0027395.PAT
SEM-BW 602 CSR0120031469_0027396.PAT
all informations can be found in:
1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0 -
IS Catch Weight Management vs. REM
Hi,
Note 1180040 says that repetitive manufacturing is not supported in CWM. Does that mean that you can't use REM at all or can I still use REMfor materials which are not CWM enabled.
Any experiences?
thanks,
-simoHi
You cannot user REM for CWM material types. For others you can stil use.
Regards
Yatin Thakkar -
Catch weight management. AUM in WM reports
Hello experts,
i can't view alternative unit of measure in standard report of SAP (ls24, ls26) I have installed the last package of CWM and my parallel unit of measure is the same as my wm unit!
Anyone know if itu2019s possible to see this units in reports??
Thanks!!someone??
-
Have a error when active Catch Weight Managerment
I have a DEV server ( oracle 10.2 g, SAP ECC 6.0 SR3) with 3 software component : SAP_APPL, SEM-BW, IS-CWM is not the same level. I want to test function Catch Weight Management in client 100 of system and I have two case
Case 1:
I update 3 software component above the same level to active Catch Weight Management with Tcode SFW5 and SPRO -> active OK . But my system is freshly. Therefore, i don't have any configuration to demo -> I don't like this case
Case 2
With purpose to have configuration to demo
I decide to take configuration of client 101 from another DEV system ( this client 101 is actived Material Ledger) by export / import client with Tcode SCC8 and SCC7
Then I import configuration of client 101 into client 100
After import into client 100 successfully and I have a client 100 which configured. Then I active function Catch Weight Management with Tcode SFW5 and SPRO ( I updated 3 software component above the same level too) -> Not Active
-> the system check compatible and have a error :
"Error in component Inventory Accounting (ACC-INV) SEM BW "
"Inventory Accounting cannot be actived : material ledger is actived "
My question : I don't understand above errors while I do right
Please help me on this issue
Thanks in advancehi
To activate catch management there should not abe any stock, and material price should be S and material ledgerr should not be active.
Hope this will help you.. -
Hi,
We maintain catch weight item's in food processing industry. We should be able to procure goods based on the items that will accomodate in each pallet. The purchaser should be able to see the total cases required per layer and total layers required for per pallet.
We maintain UoM in material master, please let me know how the system can calculate the requirement based on cases for each material. We need to have this requirement in planning screen, so that the purchaser will finalise the quantity by looking the number of cases that is required for each pallet.
Thank you.Good day
We have a similar issue.
In our system the line item type for the CW product was IDCW. When we however split them by batch into two sub-lines, the new lines defaulted to IDLV (instead of the expected IDCW).
So I think Alexander's diagnosis is spot on?
My question though... What logic does EWM use to derive the item type for the sub-lines? Because surely it should be the same as the 'parent' line item (IDCW in the case) ?
Please advise
Callie -
Hi experts,
Our customer sells Cases (CS), each CS with its specific weight (Lb). Each CS has a unique ID, bar coded. They receive an order for N Cases, select the cases to ship and bill by Lbs. How would you manage it? Do we need an add-on solution?.
What we have done:
1. Define each case as a differeny batch, with Qty equals its specific weight in Lbs.
2. Define an average conversion factor, let's say 10 Lbs per Case.
3. Once the order for 5 CS (50 Lbs in theory) is converted to a Delivery document, 5 different batches (CS) are selected.
4. The total weight for the 5 CS selected (let's say between 46 and 55 Lbs) differs from the expected quantity of the order (50 Lbs), so it doesn't let you add the Delivery document without going back to the main delivery and "changing manually" the actual quantity to be delivered in Lbs.
How would you solve it?
Thanks for prompt answer,
AndresHi Castri,
As Below -
In SO record the cases to be delivered in a UDF. CORRECT. OK
A formatted search can multiply this by a factor and convert this into SO qty in kgs. IT GETS THE THEORETICAL QUANTITY (WEIGHT).
Yes Let SO be in theoretical weight
Let the SO qty and Delivery qty be recored in kgs (Inventory UOM). Billing shall also be in kgs. CORRECT, BUT HOW DO YOU KNOW HOW MUCH IT IS GOING TO BE BEFORE SELECTING THE CASES?. In SBO, the Delivery can be made for a qty (kgs) which is greater or less than the SO Qty (kgs). Make Delivery for the Actual Qty Modify the "Cases" or "Packs" UDF value to the Actual number of cases being delivered. As i understand this should conform to the No of cases Ordered.
In SAP, at Delivery the delivered batches (cases) are selected and the delivery qty is recorded in kgs. BEFORE YOU START SELECTING YOU HAVE TO MODIFY THE TOTAL QUANTIY (WEIGHT), OF THE CASES, WHICH IS IMPRACTICAL (CANCEL SELECTION, MODIFY TOTAL WEIGHT AND BACK TO SELECT THE CASES AGAIN). SAP is just matching the SO KGS with the DELIVERY KGS and even then there is no restriction that it has to be exactly the same unless this is a validation addded by you at this site. Note if you want to record the case-wise weight (weight of each case being delivered) this can also be recorded in "Packages" screen. From Delivery screen Open the Menu item Goto -> Packaging. Please try here and you can create a Case/ Pack master and then record case-wise weight here. The Delivered KGS will get carried forward to the AR Invoice and you can Invoice the Customer accordingly.
SO and Delivery PLDs can reflect the SO and cases Delivered cases as well. is that as needed. CORRECT.
Please let me know your comments.
Regards -
FM to fetch BUOM and PUOM for catcha weight materials
Hi,
Any body know the FMs to fetch BUOM(Base unit of measure) Quantity and PUOM(Parllel unit of measure) quantity.
Please pass it to me.
Thanks in advance,
SadaHi,
BUOM is the Unit of measure in which stocks of the material are managed and it is also called as stock keeping unit.
Order unit is the unit of measure in which u r going to place the order.In sales,it is called as sales unit.In purchasing,it is purchasing unit.You need to maintain alternate unit of conversion if you are maintaing these order units.
In your case wt unit in basic data 1 is the unit of the gross wt maintained.If u want maintain any wt in under dimensions of the material,you have to define wt unit.For this no necessary to maintain alternate unit of measure
Hope it helps -
Hello,
We have CWM installed and right now we have storage bins (FP) defined in IM and reserve bins defined in WM. I am not sure why this was done, but it causes unnecessary movements between the 2 storage locations. I am wondering if running CWM is the reason for this setup. Also, I have read that if you run CWM, you need to use Inventory Accounting, is this true?
We have the requirement of valuating stock by parallel unit of measure.The storage bins might have been created as a part of business requirement.
If you run CWM the following are a paart of it in edition to SAP ECC
- LIME as a component of SAP AP (for inventory management)
- Inventory Accounting based on SAP SEM
Maybe you are looking for
-
Mac being unable to sever connections and I can't access secure databases
Recently my university library underwent a security rehaul, since then I have been unable to access secure databases to do research for papers and the like. After resetting my browser, emptying my cache, and shutting down my computer, I am unable to
-
Font problem with Acrobat 8 Pro
When I print to pdf using Acrobat 8 Pro, I find that the fonts don't always look the same in the created pdf file as they do in the original document (whether created in Pages or Word). They look a little squished or altered slightly in a way that is
-
Handling NULL in Oracle Function
I try to handle NULL with IS NULL in side the Function. But I some how can't do it. Control always goes to NO_DATA_FOUND Exception block. In BEGIN block, if I try to handle with IS NULL condition but it doesn't work. But if I use DBMS_OUTPUT.PUTLINE
-
How to get list of TCODE allowed to be executed for a user
abap program..to get the list of TCODES allowed by the basis person for a user/me.....code plz....
-
Can business catalyst be used on external content
Good afternoon, We use Business Catalyst for a few sites, and really find the metrics and site information useful. We have some content that we would like to keep on our own local servers, and we were wondering if there is a way we can set up busines