Catche Notification in Catche Overview - while refreshing Cache

Hi All facing foolowing error while refreshing cache,
"Unable to determine the name of Central Adapter engine from the System landscape directory at this time. Notification to Central adapter engine are therefore listed using the technical name of adapter engine. This is usually structured as follows: af:<SAP System ID>.<Name of Application Sever>
Please help.
Regards,
Nitin

Hi
Log in into XI and run the transaction SLDCHECK and see whether you have success or any errors?
Check this Blog. it should probabaly solve your problem.
Adapter Engine cannot be found in Integration Directory

Similar Messages

Error while refreshing cache

Hi ,
My scnearo was working fine . Suddenly i am getting this error in moni
error while refreshing cache
if any one ever faced this problem plz let me now
thanks
amit

Hi Amit,
1. Check the RFC destination INTEGRATION_DIRECTORY_HMI in transaction sm59. Check the connection and the username & pwd.
2. Check the HTTP services default_host/sap/xi/cache and default_host/sap/xi/cache_ssl. They should be active.
There are other troubleshooting steps outlined in the document 'How To Handle Caches in SAP XI 3.0'. I suggest you go through them.
https://websmp104.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Cheers
Manish

NO INTEGRATION SERVER, Error while refreshing the XI runtime cache

Hello guys,
I have the following error in an integration scenario of SOAP -> PI -> PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
Thanks for your help,
Regards,
Felipe

Hi,
The error is clearly showing there is cache error.
To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
That will solve ur problem
Please award marks if found useful.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from requesting points
SDN PI/XI Forum Moderator
Thanks
Hamja

Error while refreshing the XI runtime cache

Hello All,
Here is what happened.
After PI7.0 install with client 001, I did the BPM scenario and it worked. After the performing the client copy the BPM stopped working with the new client. I did the client copy per note 940309.
The file is getting picked up (set the processing mode to delete).
Getting the following error in SXMB_MONI.
"SXMB_MONI_BPE" doesn't show any info as the file has never made to BPM (I guess).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
As always help is much appreciated and points will be given.
Regards,
N.S

Can U check the RFC destination INTEGRATION_DIRECTORY_HMI.
Check the connection, it should give response code 500.
otherwise check whether U have given the correct URL
in the path prefix.
/dir/CacheRefresh
Check the User has proper authorization.
With regards
K.Varadharajan

Getting error - "Error while refreshing the XI runtime cache"

Hi,
for both inbound and outbound I am getting error - "Error while refreshing the XI runtime cache". Please find the error details below:
FOR INBOUND:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
FOR OUTBOUND
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks in advance for your inputs..

Rajesh,
>>500 Internal Server Error
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: REQID not found].
Exception id: [001279CFE174006E000000B900001D3C0004275E9952BCCA]
This is not an error status. This is an expected result. You can see this in XI configuration guide.
Regards,
Jai Shankar

Error during last attempt to refresh cache in tranaction sxi_cache

Dear Team,
We are geting below error , while executing sxi_cache transaction . please suggest .
Status of Runtime Cache.
Cache content is up-to-date
Error during last attempt to refresh cache , wile double clicking this , we found below log .
Thrown:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Attempt to access application REPOSITORY using HTTP Method Invocation (HMI) failed. Detailed information: Invoking ROA method "ReadObjects" via HMI ... FAILED due to following exception: Message: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://gsapnppid.galsap.local:50000/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 401, response message is "Unauthorized"
Stacktrace:
com.sap.aii.utilxi.hmi.api.HmiCoreException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://gsapnppid.galsap.local:50000/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 401, response message is "Unauthorized"
at com.sap.aii.utilxi.hmi.api.HmiCoreException.newCommunicationError(HmiCoreException.java:85)
Kindly Advise

Please Check if the user PIDIRUSER is locked.
If user is not locked, check if the credential for user PIDIRUSER and respective password is correctly maintained in Exchange Profile.
Regards,
Murali Narayanan

Could not albe to refresh cache

If 500 says HTTP connection.
I do not understand why my cache is not getting refreshed.
I am getting an error "Could not able to refresh cache",Error while trying to refresh the cache in sxi_cache.
Please Clarify.
Thanks.
Srini

Did you go through the Document in this thread? Refer to the trouble shooting section and try to debug,
could not able to refresh cache
Regards
Bhavesh

Error while refreshing a report using local csv file

Hi,
I'm using BI 4.1 SP02.
While using Rich client, I've created a report with some merged queries, while one of the queries is a local CSV file - saved on AD in some server, and not on the repository inside BO.
While trying to refresh the report with the Rich client, it all went great.
Now, while using BI Launchpad java based app, I can't refresh the report - I get the following error:
"An Internal error occurred while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270) (WIS 30270)"
Should I be able to refresh a report without the Rich if it contains a local file (which is possible to EDIT only with rich) ?
If so, then did someone ran into this error?
Thank you,
Or.

First of all, thanks for both of the replies.
Second,
my problem is unlikely have to do something with permissions from one reasons -
when the report is using XLS\XLSX on same folder(with same name prefix) - the report is running without any problem.
Only problem is while refreshing without Rich while the source is network CSV file.
Any suggestions?
Thanks.

Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014

we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
I am confused about Configuring the Analysis Service in SharePoint Mode.
What account should be used for Configuring the Analysis Service in SharePoint Mode?
what are the steps and what permissions are required and where to add it?
can you please explain in detail so i can make sure about my account permission properly in my environment?
Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
it is mentioned here to have two services are running under manages services under sharepoint central,
https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
but we don't have SQL Server Analysis Services
running under Manage
services on server.
what need to be done here to fix this issue ?
Thanks,
Deepak Patel

Hi Deepak,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error occured while refreshing webi report in bi system

Dear Experts ,
please look into my problem
While refreshing WebI report in BIDEV system, we are getting the following error. The problem occurs only while refreshing the report.
ERROR: a database error occured. the database error text is unable to connect to sap bw server incomplete logon data.. (wis10901)
Regards

HI ayur
In the universe connection if the username and password is hardcoded then make sure those username and passwords are correct.
else
Make sure you are in the right BOX, for example if Universe is pointed to Prod, and you execute the report associated with that universe in the Dev, then that error will show up. So in universe connection find out to what BOX(dev, test, prod) it is pointed to and login to webI in the same BOX as universe pointed to and execute the report.
It should work, if not please let us know.

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Database Error while refreshing webi report

Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRK

Hi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B.

Ping Error while refreshing webi in view/HTML mode

Hi all,
while refreshing a webi report from Infoview in XI R2 SP6, I'm getting the following error:
Ping: Infoview cannot connect to the server. Close the report panel and try to connect again or see your Business Objects Administrator.
If I click on OK, the the refresh of the LOV continues and data is refreshed.
The error is not occuring if refreshing from the Java Report Panel.
Have you ever seen this error?
Can you help me please.
Weblogic 8.1 SP4.
Solaris 8.

Hi,
we were facing the same problem with InfoView in XI 3.1.
in our case, it helped to increase the numeric default-value (20000 i.e. 20 Sec.) of the
"<tt>ping_waitTimeoutID</tt>"
in the JavaScript-file "<tt>viewer.js</tt>" in directory
<tt>$/bobje/tomcat/webapps/AnalyticalReporting/viewers/cdz_adv/language/LANG/scripts/</tt>
Where for this installation <tt> /LANG/</tt>* stands for "/de/" and "/en/".
1665 function ping()
1666 {
1667 /* ping_waitTimeoutID=setInterval("checkTheConnectionn()",20000); */
1668 ping_waitTimeoutID=setInterval("checkTheConnectionn()",80000);
1669 }
best regards,
pkunk*

Getting multiple error while refreshing or scheduling WebI report

Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep Gorpadu

Hi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra

Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014 using BISM file connection

I am getting following error while refreshing connection on excel sheet in power pivot gallery,
my scenario,
using BISM file connection to create and refresh power pivot excel sheet in power pivot gallery
throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
Microsoft.AnalysisServices.ChannelTransport is not available.
i found error in event viewer,
"Activation context generation failed for "C:\Program Files\Microsoft Analysis
Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
what should i do to fix it?
Thanks for help.
Deepak Patel

Rebecca,
yes, this is issue i am getting.
Activation
context generation failed for "C:\Program
Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
let me know if you can find fix for it.
THanks,

Catche Notification in Catche Overview - while refreshing Cache

Similar Messages

Maybe you are looking for