Catching Error while calling FM (RFC Enabled)
Hi all,
1. In a loop on RFCDES table
im calling a Function Module
passing different RFC Destinations.
2. In any of the loop pass, if any
error comes, there is a short dump.
3. How to avoid this short dump
and continue the loop till end
using try,catch etc ?
Regards,
Amit M.
http://help.sap.com/saphelp_nw04/helpdata/en/13/90a594a1ab0841bbb731bdec1a7fd7/content.htm - check this link for handling exception when calling RFCs
call the function like below
data: list like UINFO occurs 0 with header line .
CALL FUNCTION 'TH_USER_LIST' destination <dest>
TABLES
list = list
exceptions
communication_failure = 1
system_failure = 2 .
if sy-subrc ne 0 .
handle error here
endif .
Regards
Raja
Similar Messages
-
Finding an error while calling an RFC
Hi,
My requirement is as follows.
The internal table(ITAB) which i am using has a field X of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
While executing it i am getting the error 'Interface data error'.
please let me know why this error is getting populated.
Regards,
SumiHi,
I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
I am getting error while calling the RFC.
Regards,
Yamini.A -
Error while calling up RFC Message No. UPC202
Hi Experts,
Calling Thru Trans code : BPS0 in ECC6.
Getting This Error :
Error while calling up RFC message No. UPC202.
After i check in BW with Trans code : ST22
Following this error message:
Category Internal Kernal Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC.
More details Please find attached file.
Thanks & Regards,
Mohammed Kaleem.Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS -
Hi GuRuS,
I am working on BI 7.0. When I open the BPS workbench using Transaction bps0 and select the planning area 4TPM9000, and click on either "Variables" tab or "Master Data" tab or when I click on "Adhoc Package", I get this error " You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated: Error while calling up RFC. "
FYI I have done RFC connections between my CRM 2007 system and BI 7.0 system using Tr.SM59 and checked the connections from both the ends and it is working fine. So, pls show me the way out.
Thanks in advance,
RaghuHi...
The roles SAP_ALL and SAP_NEW are assigned for the RFCUser.
Regards,
Raghu -
Error while calling an RFC from R/3
Hi all,
I am new to webdynpro. I am calling a RFC from R/3/.the code is like this.
Zhr_Fm_Loan_Input input = new Zhr_Fm_Loan_Input();
wdContext.nodeZhr_Fm_Loan_Input().bind(input);
input.setUsrid(wdContext.currentContextElement().getEmpnoa());
try
wdContext.nodeZhr_Fm_Loan_Input().currentZhr_Fm_Loan_InputElement().modelObject().execute();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException("Exception "+e,true);
In the output i am getting an eror Exception com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException.
Can anybody explain the error.
Regards,
RajeshHi Rajesh
Kindly check ur BAPI once from Backend, i hope there is no other mandatory field required apart from Usrid.
I hope BAPI doesnot have any mandatory Structure in it. in case it has , u have to pass that also..
Try printing this context also ..wdContext.currentContextElement().getEmpnoa().. i hope it is not returning a null.
wdContext.nodeZfm_Input().nodeOutput().invalidate(); // Add this line after execute statement
Regards
Puneet -
JCOProxy error while calling a RFC
Hi,
When i tr to call a RFC "CBIF_GLM1_BATCH_READ", i get a fatal error.The error message is:
"JCOProxy error: Problem retrieving JCO.Function object."
When i checked if i was able to connect to any of the functions other than BAPI's i got the same error.
Is there something that i need to turn on in SAP?
I am using SAP xMII 11.5.3 SR03 and SAP 4.7 Enterprise.
Any help appreciated.
Thanks,
RamRam,
I tried loading this RFC, CBIF_GLM1_BATCH_READ, using my version of xMII 11.5.3 and it worked without a problem. Are you sure that this RFC was not modified in your system that causes it to not work properly? Also, when you tested the RFC in se37 did you try to run it without setting any parameters? What about using the Web DynPro interface to see if it generates the XML properly? Just a couple of things to look into, but I know it's not xMII. If you did modify the RFC you will have to restart the ServletExec service to clear the xMII JCO API cache. Hope this helps.
-Sam -
Error while calling an RFC from R/3 to XI
Hello,
I am calling an RFC to send data from R/3 to XI which uses an RFC destination of TCP/IP type. I am getting the following error:
"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException".
Kindly provide some inputs.
-kshitija.hi
i think error lies with ur authorization...
check the following thread .....
Re: com.sap.aii.af.ra.ms.api.DeliveryException
hope this helpful... -
Error message "Error while calling up RFC"
I got this error message with a testuser in our quality system when I want to call up a web interface to enter some plandata.
I think it's a problem with authorization; the authorization object 'S_RFC' is set in the role. Is there another authorization object that should be used?
THX so long, ClemensHi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS -
Error while calling RFC adapter(FILE-XI-RFC scenario)
Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere -
Error while calling RFC when using BSP Web Interface
Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
JoergActually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded. -
Access denied Error while calling Web Service form Infopath Form 2010.
Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you -
Error while calling a method on Bean (EJB 3.0)
I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Operation not found error while calling AM methods from managed bean
Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
SatyaHi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan -
Error while calling WebService inside ISchedulerTask.
Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
<service name="RFServiceWrapper">
<service-config>
<property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
VinodFollowing is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file.
Maybe you are looking for
-
Payment terms of Purchase Order and F-47
Dear All, How can we link Payment terms of Purchase Order and Advance Payment made thru F-47. i.e if we have given payment terms in Purchase ORder as 50% advance then by advance payment (F-47) we shall allow to pay only 50% of Purchase Order value as
-
Windows 8.1 not recognizing Webcams
Has this problem of Windows 8.1 not recognizing webcams been fixed yet? I updated to 8.1 and my webcam was not recognised (Microsoft Lifecam Cinema) I thought my cam may be faulty so bought a new com (Logitech C270) same problem. So finally I reinsta
-
How to compile ap_documents_payable.xdf
dear all, ap_documents_payable.xdf anyone know how to compile the ap_documents_payable.xdf file? in r12 application
-
How do I tell if the option key is down?
I want to detect whether the option key is being held down while the gui is setting up (the option key, only appearing on macs, is roughly equivalent to the 'alt' key). I am not having any particular events fired at this time, that I know of. How can
-
So I've been having problems with my mac for a hiwle now, first the charger wouldnt worlk, then the computer would randomly shut off. I had to use those CDs that come with the computer and restart everything again. Finally, the charger started workin