Categories for contacts in osx 10.8

Is it possible to sort contacts in the adress book osx 10.8 by means of categories like in Outlook?

No.
You can put them in Groups, but that is it.

Similar Messages

CATEGORIES FOR CONTACTS

I have a Palm Tungsten E2. The Palm products allow you to put contacts in categories...ie...family phone numbers can be a specific category, restaurant contacts can be a category and so on. I exported the Palm contacts to Yahoo and then Yahoo to Iphone. THe contacts did not export. I was told by the Apple Mac Genius people in a store (the couple I met were definitely not well versed in too much) that Yahoo does not receive the contact field. They suggested Outlook 2003. I exported my Palm Contacts to the Outlook 2003. While the Palm Contact Categories DID export to Outlook they did NOT export from OUtlook to the Iphone. Does anyone have any idea how to get these contact categories to funnel into Iphone so I can then sort..if I can even sort? Thank you much.

I have a Palm Tungsten E2. The Palm products allow you to put contacts in categories...ie...family phone numbers can be a specific category, restaurant contacts can be a category and so on. I exported the Palm contacts to Yahoo and then Yahoo to Iphone. THe contacts did not export. I was told by the Apple Mac Genius people in a store (the couple I met were definitely not well versed in too much) that Yahoo does not receive the contact field. They suggested Outlook 2003. I exported my Palm Contacts to the Outlook 2003. While the Palm Contact Categories DID export to Outlook they did NOT export from OUtlook to the Iphone. Does anyone have any idea how to get these contact categories to funnel into Iphone so I can then sort..if I can even sort? Thank you much.

How do I sync iPhone contacts with osx 10.9.4 contacts?

I have an iPhone running iOS 7.1.2.
It has 143 contacts in it.
I have a MacBook Pro running OSX 10.9.4 with 'Contacts' 8.0.
It shows the same 33 contacts I entered when I got my iPhone in 2012.
I have been trying to update, i.e., SYNC, the contacts in my MacBook Pro's Contacts 8.0 using a USB cable without any luck. I'm not a big fan of iCloud.
I have SYNC CONTACTS checked in iTunes 11.2.2 INFO with my iPhone connected via USB.
Since the MacBook Pro's Contact 8.0 is where my contacts SHOULD be saved and THE most BASIC way to save the contacts, I'm amazed at how convoluted and difficult it is to sync my iPhone's contacts with Contacts 8.0 on my MacBook Pro.
What am I missing?

Hello AuCountry,
Thank you for contacting Apple Support Communities.
You don't say what you have tried and what you see when you do try to sync, but this article is the place to start to sync your iPhone.
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
http://support.apple.com/kb/PH12117
Regards,
Jeff D.

Please Help!! Images for Contacts

How do I go about getting the contact images to display on my ipod? I have set all images in my Address book, but they don't come over when I sync my contacts. How do I get the images of each individual contact to display in my contacts???

You need to upgrade to Mac OSX 10.4.3 in order to get photos for contacts.
http://docs.info.apple.com/article.html?artnum=302493

How to force a "push" for contacts sync?

In Settings, I use my MobileMe account ONLY for contacts, calendars, and bookmarks, not for e-mail.
I have Fetch New Data set to Push, then Push set to Manually, then in Advanced, my e-mail accounts are set to Fetch (i.e. it'll update my mail only when I launch the Mail app) and my MobileMe account set to Push (i.e. I'd like them to be pushed to the phone).
However, no contacts seem to get pushed to the phone. It's confusing as to how I'm supposed to initiate a manual push. Launching Contacts doesn't update the contacts.
I don't particularly want to set Push to every 15 or 30 minutes, because I don't want to drain battery life. I'd be happy if it sync'ed once a day, but right now it's not syncing at all.
Can someone help me understand how "push" and "manually" work (since there is no "force push right now" button anywhere) and how I can keep my contacts on my iPhone updated regularly automatically?
Should I set MobileMe to Fetch? So that, as in when I launch Mail it updates the mail, when I launch Contacts it will update the Contacts? That would be good enough for me.
(Also, this entire post is about downloading contacts from MobileMe, but I'd also like to make sure the reverse works too -- that if I add a contact or calendar date to my iPhone, it gets synced with MobileMe and later appears on my desktop machine.)

Huh. Mine it does happen automatically, both ways.
On the phone, Settings, Mail, Mobile Me account--do you have to set to sync contacts, calendar and bookmarks? Those can be turned off individually (this is in the account detail itself, not under the Fetch/Push setting screen.)
On the computer, System Preferences, Mobile Me, do you have it set to sync automatically?
When I see things not syncing, I generally force a sync from the computer, figuring that triggers the server and so on down the line to the phone.

Campaign execution not send emails for contact persons

Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
Inê

I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
          partner type but000-partner,
          address type but000-addrcomm,
         end of ty_cp,
         begin of ty_bpcp,
           partner1 type but051-partner1,
           partner2 type but051-partner2,
         end of ty_bpcp.
data: it_cp type table of ty_cp,
        wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
        wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
        wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
    select partner addrcomm
      from but000
        into table it_cp
          for all entries in ct_bp_cp_channel
            where
              partner = ct_bp_cp_channel-cp_number.
    select partner1 partner2
      from but051
        into table it_bpcp
          for all entries in ct_bp_cp_channel
            where
              partner1 = ct_bp_cp_channel-bp_number.
    if it_bpcp[] is not initial.
      select partner addrcomm
        from but000
          into table it_bp
            for all entries in it_bpcp
              where
                partner = it_bpcp-partner2.
    endif.
    sort it_cp by partner.
    sort it_bp by partner.
    sort it_bpcp by partner1.
    loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
      read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
      if sy-subrc = 0.
        <fs_bp_cp_channel>-addrnumber = wa_cp-address.
        clear <fs_bp_cp_channel>-bp_number.
        clear <fs_bp_cp_channel>-bp_guid.
      else.
        read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
        if sy-subrc = 0.
          read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_bp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          endif.
        endif.
      endif.
    endloop.
endif.

On win 7 64 bit mozilla or IE 10 I get the following message This installation package could net be opened verify that the package exist and that you can access for contact the application vendor to verify this is a valid windows installer package I trie

I get this following message when installing the latest itunes on mozilla or IE10 was working on this machine before crash and reinstalled for HP disc I tried at leat 15 times firewall off /on microsoft essentials on/off on windows 7 64 bit see message
This installation package could net be opened verify thatthe package exist and that you can access for contact the application vendor to verify this is a valid windows installer package

If you are not already doing so, install from an Administrator account.
If you haven't already done so, download the iTunes Installer from:
http://www.apple.com/itunes/download/
Then right click on the installer and select "Run as Administrator." (Even though you are using an admin account).
If that doesn't work, try creating a new administrator account and installing from there.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

For some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.

Does Office365 EWS provides Push Notification service for Contacts and Calendar Events?

Even though there are REST API's for performing PUSH and PULL operations for Office365(online), I am still looking the old EWS approach where in I want to subscribe for PUSH notification service for Contacts, Calendars and Mail Boxes.
Can any one suggest if there is a way to achieve this.

I posted an answer in your Stack Overflow post.
http://stackoverflow.com/questions/27837887/does-office365-ews-provides-push-notification-service-for-contacts-and-calendar/27844747#27844747

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown

Hello,
Our infrastructure:
Exchange Server 2010
Outlook 2010
Outlook 2013
Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
The situation:
We've used an old custom form for contacts, worked perfectly fine
I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
I've set the form as default form in our contacts folder
I've used this Script to set the new form for the existing contacts and the name of the new form is saved correctly
BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
Steps I've taken so far:
Cleared Outlook forms cache
Repeated the above steps 1-4 in Outlook 2010
Switched Cached Exchange Mode off and back on
Allowed Scripts in Trust Center Settings
Used a new clean Windows installation with a new Outlook 2013 installation
Used different Exchange users on different systems, but some behavior when opening contacts
I'm out of options I can think of, so maybe somebody else has some new view on this problem.
Thank you very much in advance!
Greetings,
Karl

Hi,
Is the Exchange folder in which the custom form is published available to all users?
From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
we can't make sure it will still work with Outlook 2010/Outlook 2013.
In addition we may also try creating a new contact form and test the steps to see if it will work.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Status of Backup Assistant for Contact Information

Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information?
I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.    I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my work added no value me.
I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago... If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone...
Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.
As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress. Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
Key questions for me:
1) Can the cost of downloading backup assistant and the syncing be refunded to me?   (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
2) When will the site be functioning with normal capability?
3) What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code?
4) If the application were working normally, how would one do updates online and have those updates exported back to the phone?

BillW wrote:
Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information? I doubt you will get anything but the "canned" response from the employees and techies....we are aware of a problem and have no estimated time of resolution.
I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.   Yeah, I hear that. $1.99.... I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my work added no value me. That's where the current issue is - syncing online changes back to the phone.
I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago... If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone... The "sync" with the online system is supposed to happen automatically. I set the option on my phone (go to BA on the phone, Options >> Set Schedule. I have mine set to late night.) It is supposed to connect to your online backup and sync any changes. Mine shows last back up at 10 days ago, and I am not inclined to hit the "back up NOW" option as that is what seems to be causing loss of contacts form the phone.
Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.
As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress. Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
Key questions for me:
1) Can the cost of downloading backup assistant and the syncing be refunded to me? Once the app is downloaded, there is no data charge for the syncing... and I doubt you will get the refund of the $1.99. (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
2) When will the site be functioning with normal capability? No clue...
3) What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code? It has worked as you expect it would, for me, in the past. I have used it for years, actually, and been pleased, and recommended it to others. The recent debacle is very disappointing.
4) If the application were working normally, how would one do updates online and have those updates exported back to the phone? Normally, it would be automatically synced to your phone when you log out of the online service, and then a daily backup from your phone to the website would occur on the schedule you set.
I am not a Verizon employee, I am simply a customer, satisfied for the most part with my service, and I like to help others. This recent BA mess is not fun....and I hope it gets resolved very soon.

HT1338 I have a Callaway range finder and need a software update and they provided the following directions and have changed the Java runtime versions several times to get their exe to update.Hello Doug, Thank you for contacting Callaway uPro Technical S

Hello Doug,
Thank you for contacting Callaway uPro Technical Support.
Please follow the instructions below to sync your upro mx/mx+ with your computer and update to the latest software - 3.1.005.
1. Ensure the upro sync software is running on your computer (you will see a black icon at the bottom right of your screen by the clock with a Callaway logo in it).
2. Plug your device into your computer; select Sync then PC.
3. The sync software should initialize and launch the uxplore website. If you haven't installed the upro sync software you can download it Here:http://www.callawayuxplore.com/downloads/
4. Download this: http://media.callawaygolf.com/webupdate/callawaygolf/2012/products/accessories/u pro/upro-mx-plus/downloads/3_1_005_launch.jnlp.zip
5. Double click "3_1_005_launch," then click the green START button
NOTE: If you get a "Unable to launch application" error please follow the instructions below.
1a. Navigate to "Control Panel" through the start menu located in the bottom left of your screen.
2a. Find and uninstall any "Java" applications. After uninstalling please go back to the start menu and right click on "Computer" or "My Computer" and select "Properties". In the right half of the pop up windows it'll say the Operating system your computer is running. If it says x64 bit click: http://tinyurl.com/lhkps2rto download the correct java for your computer. If it doesn't have a number please click: http://tinyurl.com/qysyctb to download the correct Java.
3a. Once the correct Java is installed please follow steps 1-5 listed above.
4a. To update your Java back to 7 please click: http://java.com/en/download/index.jsp. Once on the page select "Free Java Download" to run the download (Make sure to uncheck any Mcafee or toolbar installations during the installation).
Once the update has completed the device will restart itself. At that time you can unplug it or select Sync and PC to launch the uxplore site again to continue syncing courses.
NOTE: Do not try to sync courses to the unit while the update is running or both processes will fail.

Java isn't a part of the Mac OS X anymore, so you will need to install a version of Java. However, I don't know what version of java is required for this software. You need to explain to their support that you are using a Mac and what OS you are running. Download the latest java and see if that works.

Categories for contacts in osx 10.8

Similar Messages

Maybe you are looking for