Categorize and filter enterprise search result

Hi All,
I want to know if it is possible to categorize and filter search result based on source (ex: list or library name or external content type etc). My client does not have FAST server license.
If this is possible with enterprise search without the FAST server could you please let me know how to achieve it.
Any help is greatly appreciated.
Regards,
Rahul

Hi Rahul,
We could sort search results in Search center, and we need modify XSLT for search result web part.
Here are similar issues for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8611e04c-d79c-42c0-a605-e88bd34eb00a/how-to-sort-the-sharepoint-search-results-with-datetime-site-column?forum=sharepointsearchprevious
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

  • Can you filter iTunes search results by video or audio podcasts?

    I have been searching for hours and haven't found a definite answer. Anyone know if this is possible?
    Can you filter iTunes search results by video or audio podcasts?

    I'm having the same problem. I go to Podcasts/Video Podcasts/News and they only give the featured, favorites (whose?), etc. I want to see all video news podcasts but if I then click on see all, it drops the video classification and shows all news podcasts. The iTunes search in general leaves a lot to be desired; its not very intuitive or pleasant to use, not the usual Apple experience.

  • I use google search.When I click on a suggestion in the search results tab, I want it to open in a new tab and keep the search results in the original tab.How?

    For example, when I enter the search term "armoires" and get a search results page/tab with suggestions such as Sears, JCPenney, or Amazon, I want to be able to click on Sears and have the Sears page open in a new page/tab. I want to be able to close the Sears tab and be able to use the search results tab again.

    In order to change your Firefox Configuration please do the following steps :
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''' to continue to the about:config page.
    # Look to '''browser.search.openintab''' change its value to '''true'''.
    With this configuration your search will be open in a new tab

  • I have just updated to 7.0.1 and suddenly my search results won't open in a new tab

    I have just updated to 7.0.1 and suddenly my search results won't open in a new tab (let alone a new window - something I much preferred in the past) although this option is checked.
    I even installed Tab Utilities Light Options - all of it's options work, but not for Search Bar.
    When I choose one of the search results and want to view several items on that site (let's say a page with some 50 photo's), there seems to be no longer a way to return to the original search result. I have to start from scratch.
    I hope this can be 'mended' because this is utterly annoying.
    Greetings

    Although 6 other people seem to have encountered this problem, nobody has offered a solution yet. Perhaps the following will put some Firefox gurus on the right trail.
    When I said "my search results", I meant the results obtained with Google (standard when installing Firefox). Now I have tried another search engine (Dogpile) and there The tabs do work. Very strange, isn't it ?

  • Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

  • PLM 7 and Netweaver Enterprise Search

    We installed PLM 7.0. We also had an existing TREX server and we set that up to do indexing in ABAP. Now we have a requirement to use PLM UI on the portal and we need the search results to display there. All the docs I have read are basically saying we have to use Netweaver Entrprise Search for any search to work within the portal. Can anyone confirm this? Or maybe does anyone know if its possible to display search results in the portal just using TREX and embedded search.
    Any suggestions are greatly appreciated. Thanks for your help in advance.

    HI Storm,
    We are in the same decision making for moving from TREX 7.0 to 7.1 with Enterprise Search Functionality as we are planning to go for SAP PLM 7.0.
    We have gone thru no of documents & presentation which suggest to go for TREX 7.1 for SAP PLM 7.0 (which is access able thru EP or using the NWBC)  to take advantage of the Enterprise search functionality.
    you can reffer to following notes
    SAP Note 1164979
    SAP Note 1266024
    SAP Note 1249465
    thanks
    john
    Edited by: johnpp on Feb 12, 2011 10:43 AM

  • Unable to filter people search results by managed properties

    I am in a strange situation. If I do not specify any filters, my people search works fine. However, if I filter it by a managed property, it does not return any results.
    How can I verify the search crawl is crawling these properties?
    Any pointers?

    Hi,
    According to your description, my understanding is that when you filter managed properties in People search results, then it doesn't return any results.
    Something needs to clarify. Does all the properties not return results or some specific properties ?
    If just some properties not return results, then I suggest you can check if you have set indexed for these properties and if there are valid data in the properties.
    If all the properties can't be filtered, I suggest you can check if there are something wrong in the ULS logs and check if you have set up People search correctly.
    More information:
    How to: Set up People Search in SharePoint 2013
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SAP-DMS and NetWeaver Enterprise Search 7.2

    Good day Experts,
    I will be thankful to you if anyone can help me with the following query.
    In SAP-DMS, we have got a reporting transaction CV04n which has got a facility to search for 'Text Search Within Original'. There is neat procedure if one wants to configure this feature for SAP-DMS. The procedure is as under
    (Re: Document text search in cv04n with TREX)
    1) Transaction: SRMO
    Install TREX search engine, and create RFC destination to connect to
    TREX.
    2) Transaction: SKPR06
    Check the flag to Document Area "DMS" to utilize this document area for
    document search.
    3) Transaction: SE38
    Run the report program "RSTIRIDX_REINDEX" to create Index.
    Also, run the report program "RSTIRIDX" to create Index as well.
    4) SPRO IMG customizing; (Create MIME Types)
    Cross-Application Components > Document Management System > General
    Data > Settings for Storage Systems > Create MIME types for full
    text search, Enter MIME type such as "application/msword",
    "application/pdf".
    5) Then, test retrieval document search using
    Transaction: SKPR07.
    Enter Document Class "DMS_PCD1", Language "EN", Document Class "DMS",
    and try "TEST search".
    We know from Karsten's SDN post (What is really 'SAP Netweaver Enterprise Search' ) that this feature is possible with NW Enterprise Search 7.2
    u201CWith SAP NW Enterprise Search 7.2 having collected the Embedded Search indexes, the local search functionalities stay active and at the same time SAP NW Enterprise Search enables central search access to all Embedded Search systems in the landscape.u201D
    Our query is as under
    Does SAP NW Enterprise Search 7.2 ; which has got its own integrated TREX engine needs assistance from TREX engine from our landscape to make this feature work. This is important becuase then we have to have two different set ups.
    A set up for SAP NW Enterprise Search 7.2 which is a separately licensed product.
    A set up for TREX engine which is part of NetWeaver  licence.
    Regards,
    Sham Bapat

    Good day Sham!
    The answer is:
    No, you will not need the local PLM TREX anymore, as soon as you have installed SAP NWES 7.2 and pointed your PLM there instead of the local TREX.
    And, I repeat, your local search functionality inside PLM will still work anyway.
    Best, Karsten

  • Searching paragraphs using automator and deleting the search results from the original body of text

    How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

    How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

  • Display blog post author description and photo in search results

    anyone found a way to do this in BC?

    But that will pull up the detail view in the search results rather then that layout and the link will be to the web app Mario
    So you would get staff up but you would have to rethink it work on a full Bio page for them if you wanted them to show up in search results.
    Other option is to not use the BC search Luke but integrate a google search for your site. It will search the pages content (all of it) and that would also include the Bio. BUT this would be in the google search results and not show that information in the results view, it would just pick up that information.
    The ajax thing I mentioned was to loop through the results, read them, if they were blog posts go Ajax fetch from the links page and find the Author information from that and then inject it into the result. It would be seamless (small flicker, slow down the page load a bit) but it would work.
    The effort though to do that, bit to much for the results gained.

  • WCP Framework 11g and SES 11g : search results are not secured

    Hello,
    We are integrating WCP 11.1.1.6 and SES 11.1.2.2
    we have quite a stunning issue here where the search results returned by a WCP Framework application are not secured, ie secured contents are returned in the search results for unauthenticated users and for users who have no permission on these contents.
    Though, the search results are well secured in the standard SES search interface (http://seshost/search/query/).
    The main concern is about results coming from WCC.
    Thanks for any help,
    Vince

    Hi Jiri,
    we managed to integrate UCM and WCP with Document Service taskflows and it works fine, ie security is well propagated for the roles we want.
    WCC/UCM and WCP authenticate users via WLS which is connected to an AD.
    SES has its own identity management system which authenticates users directly to the AD.
    We activated the SESCrawler component in WCC/UCM and the SES/UCM crawling process is OK.
    We can search for UCM contents in SES without issue and anonymous/unauthenticated search in SES doesn't return results from non-public security groups, which is what we want.
    WCP search is connected to SES (which is the default setting), eg from adf-config.xml:
    <searchC:adf-search-config xmlns="http://xmlns.oracle.com/webcenter/search/config">
    <display-properties>
    <common numSavedSearches="5" />
    <region-specific>
    <usage id="simpleSearchResultUIMetadata" numServiceRows="5" />
    <usage id="searchResultUIMetadata" numServiceRows="5" />
    <usage id="localToolbarRegion" numServiceRows="5" />
    </region-specific>
    </display-properties>
    <execution-properties timeoutMs="7000" prepareTimeoutMs="1000" />
    <crawl-properties fullCrawlInterval="P5D" enableWcServicesCrawl="true" enableWcDiscussionsCrawl="true" enableWcUcmCrawl="true" />
    <ses-properties>
    <connection>ses</connection>
    <data-group>SourceGroup</data-group>
    </ses-properties>
    </searchC:adf-search-config>
    So the problem is that anonymous/unauthenticated search in WCP does return results from non-public security groups, which is not what we want.
    eg: access to the WCP app (don't logon)
    run a search
    in the search results, you can see contents which are not assigned in the public security group. Though, the WCC/UCM guest role doesn't have any permission on these SG.
    I can't raise SR myself.
    Thanks for any help,

  • Add email from main address and communication to search result

    Hi everybody,
    I am currently trying to add the main address and communication email address from the contact person to the contact search result.
    What I've tried so far is enhancing the BP_CONT_SEARCH/SearchResult view and adding attributes to the context node Result.
    I added model attribute BuilContactPerson/BuilContactPersonStandardAddressRel/E_MAILSMT but that did not display the correct one.
    Also added BuilContactPerson/BuilGetHeaderforContactRel/BuilStandardAddressRel/E_MAILSMT but there nothing gets displayed.
    Anyone who knows how to get the email in the search results?
    Best regards
    Tom

    Solved it myself. The relation was wrong.
    it should have been
    BuilContactPerson/BuilGetPersonforContactRel/BuilStandardAddressRel/E_MAILSMT

  • I used firefox help and now the search results keeps reloading when I start firefox

    I just loaded firefox and I used the firefox help feature. now my search results continue to load in a separate tab when ever I open firefox. I cleared history in tools and still this page keeps loading in a tab when i open firefox.

    Hi,
    You can try to '''Restore to default''' the '''Home page''' in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20General%20panel?as=u General]. If the problem persists you can also try deleting the '''sessionstore.js''' file in the [http://kb.mozillazine.org/Profile_folder Firefox Profile Folder] after exiting Firefox. To open the profile folder via Firefox: '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Show Folder'''.
    [https://support.mozilla.org/en-US/kb/Firefox%20has%20just%20updated%20tab%20shows%20each%20time%20you%20start%20Firefox Similar]
    [https://support.mozilla.org/en-US/kb/Options%20window Options]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

  • SAP CRM 7.0 and SAP Enterprise Search

    Hello,
    I need your help. We want to use enterprise search in our demo system (CRM 7.0). I use the Web dynpro application ESH_ADMIN_UI_COMPONENT. However, when indexing we get the following errors:
    Data of NW authorization objects could not be indexed
    The implementing class does not support the iterator by time interface
    Indexing ended with error
    Indexing of complete objects from type USER_AUTHORITY has returned 5.508 NameServer error: no servers found IndexId:esh:cr7
    Multi-index call of index ESH:CR7100CR7100USER_AUTHORITY~USER_AUTHORITY has returned 5.508: NameServer error: no servers found IndexId:esh:cr7
    Indexing ended with error
    best regards,
    Wim Olieman

    Hi,
    Please check the TREX version. TREX version MUST be version 7.1 not 7.0.
    For further details see also note 1266024.
    best regards,
    Karl Fürst

  • Search Results Web Part, Managed Navigation and Paging

    I am using managed navigation and have a search results web part that uses the Term.IdWithChildren as the query to filter the results by the selected navigation term. This works nicely until you need to us the paging. As soon as you go to the next page there are
    no results.
    It would appear that as soon as the URL has the #k=#s=11 added it looses the navigation term. This is a core part of the Sharepoint solution that I'm delivering and I cannot progress this any further and I'm going round in circles. I have another results
    page that has the search results webpart on but doesn't use the navigation term filtering and the paging works fine.
    As an alternative I was looking at writing my own search results web part, can I do this and render the sharepoint display templates somehow?
    Any help would be appreciated.
    Stuart

    Hi Stuart, 
    i suppose you may need to check your design regarding this custom coding, 
    as i know, when i tried previously, i didn't take any attention on the query result, so that it appear as no result. 
    please have a check this links, it helped me once, 
    http://technet.microsoft.com/en-us/library/gg549981.aspx
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/59e6e258-294d-44b2-996a-547e4e9f519d/customize-search-statistics-and-search-paging-web-parts
    http://kamilmka.wordpress.com/2012/04/14/customize-sharepoint-search-results-paging/http://blogs.msdn.com/b/sanjaynarang/archive/2009/02/20/handling-paging-and-total-results-count-in-sharepoint-custom-results-page.aspx
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for