Categorizing issues when moving Elements 10 from one PC running XP to Windows 7

I purchased a new desktop that is Windows 7 based and had to reinstall Elements from XP. I saved all my 13,000 photos to an external drive and then downloaded them onto my new desktop with Elements 10. I noticed that the photos were NOT categorized. How do I correct this?

Thank you for this information. I am currently performing a full backup of my photos (13,000 photos) to an external drive from my old PC (old PC is about 5 years old). So far it has been running about 24 hours. Do you have any idea how long it should take for this many photos to be backed up on a PC that is this old? Any guidelines would be appreciated…..
Pete

Similar Messages

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Issues when migrating workbook from one EUL to another EUL

Dear Members,
We have two types of EUL. One is an standard EUL and another one is Apps based EUL. We have many reports created in standard eul and my task is to move these workbooks to an apps based eul.
Standard EUL is nothing but a database based eul. Users who created these workbooks in this EUL are the database users. Now i exported these workbooks to an .eex file using the command line interface. But when i am trying to import these workbooks in an apps based eul i cannot see them after import. I know this might be an previlages issue.
My question is these two eul's are completly different from one another. One is database based and another one is apps based and even the users in both eul's are different as they have different accounts in database and application.
We have a lot of reports created using the database based eul. Our goal is to move these to apps based eul so that users can use there responsibilities and run the workbooks rather than using desktop by logging in as a database user.
How should i proceed in migrating these reports. It would be great if any one guides me.
Thanks
Sandeep

Hi,
You should ensure that you take ownership of the workbooks when they are imported and that you log in as an apps user (not the EUL owner) when the workbooks are imported.
Rod West

Users inconsistent when moving them from one org ID to another.

Hello experts,
We are using SRM 5.0, and every time I move a user within the organizational structure it renders them useless.
When I check users_gen -> Check user and employee data I get the following:
Error: Business partner for <USERNAME> is missing or contains errors
And, at the right, on the column "Object existence/consistency", we get a red light.
Is there a solution for this issue?
Regards,
Gilberto Gallardo

Hi,
Please check in BP relation in BP transaction, for the BP of the user .
Go to BP transation --> enter the BP number of the user --> click on start --> double click on the result --> now click on 'Relation' button
If we don;t have any relation then this is the issue.
If we find more than one relation then this is also an issue.
If we find one entry --> now double click on the entry --> check whether
any error. If there is any error, related to address please correct the address of org. to which the user is connected.
If there is no relation in BP relation, try to recreate it with the following steps, (this can be applicable only if HR Replication - OFF)
For this purpose, position the cursor on the business partner of
the user, select the context menu with the right mouse button and select
'Delete -> Assignment'. Memorize the business partner number and then
assign the business partner to the position again. To check your
changes, start Transaction USERS_GEN.
Regards,
Amudha R V

Alternate layout created when moving pages from one document to another

I'm using CC on Windows 7 - I have 2 documents that I want to merge and make into 1 [I know people will want to know why I would want to do this - each document is the result of a different data merge - data merge can only handle one master page - so I have 2 datamerges - 2 files - and just need to merge the 2 files]
This used to work beautifully in ID 5.5 - now when I use the pages panel to move the pages to the other document - it creates an alternate layout - it is then very difficult for me to interlace alternating pages - - I use dot be able to just move the pages into place - but with eh 2 layouts it is behaving differently and in a way I do not understand. Is there any way I can get around this? or avoid the alternate layout and just have one. The 2 page sizes are identical so it is not a problem of varying size - the paragraph styles are all the same as well. I have tried to delete the alternating style but it will delete all the pages as well.
Thanks

Maybe its time for me to Replace my Preferences, because I also have 8.0.2, and I tried the same thing with two new documents based on the same preset - it still made an alternate layout. When the moved page is placed in the middle of several pages (say - after page 2, of 6 pages) all the pages after the inserted one become part of the new alternate layout. In this example, I had a six-page document, and moved one page of the other identical document to After Page 3 Here's the result

Quality issue when moving clips from events to project

When I drags clips or parts of clips from events to my project, the quality drops significantly (blocking).
Original clip (H264 encoded SD video) is fine, when imported into imovie it is still fine when skimmed/viewed in the event but as soon as draged into the project, the quality is bad (when skimmed/viewed in the project) and blocking occurs, especially in dark parts of the video. Of course this bad quality remains on the exported video :-(((
Any idea where this might come from and how to overcome it ?
Thx for your support

Apologies for bumping this again, but I'm getting the same issue and I'm wondering if it's the original HD files that are incompatible in imovie. It's odd that only a few of us are reporting it.
I'm capturing HD video in mov format (motion jpeg) from a panasonic FZ5 still camera. The footage has been imported via iphoto. It's 30fps - not the native uk frame rate - but I can't change this on the camara. When I edit in imovie, I get the same massive drop in quality as soon as I move an event to the timeline. Blocking especially on blocks of colour. This happens on playback from the timeline within imovie and on export. I've tried creating a project in both pal format and ntsc in case the frame rate is the issue. No joy. In Final cut the problem seems not to exist, but I'd prefer to manage these very simple home movies in imovie.
I'm now wondering whether to switch to a different still camera like the newer panasonics or sony hx5 as these capture in avchd (presumably 25/50 fps if sold in uk) and might get over the problem. any thoughts?

Loss of names when moving photos from one library to another

I created a new library and moved some photos to it but they no longer have the Faces information with them. Is it possible to move that information as well of am I doomed to have to re-name every person in the photos?

How did you move them? The only way to move files between libraries and maintain all metadata is with iPhoto Library Manager
Regards
TD

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

TROUBLE MOVING CONTACTS FROM ONE GROUP , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE

TROUBLE MOVING CONTACTS FROM ONE GROUP , , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE AB

I have many different mailaccounts and different groups of contacts on my ipad and iphone. Sometimes i made the mistake when i create a new account linking it with the standard account. How it is possible to move one account to an other group?

Issue in moving files from data fodler to processed folder in background

Hi All,
I am facing one issue in moving files from data fodler to processed folder in case of background execution.
When i am executing the file in the foreground, i can move the file from Data folder to processed folder. I am using SXPG_COMMAND_EXECUTE FM to move the file from data folder to processed folder. I can see the file in processed folder once the program is executed.
But in case of executing the same program in background, it is giving me the error "Failed to move the file to processed folder" in the spool of SM37 and i can see the file still laying in data folder.
I tried to check other programs which acesses the same folder as the above program, whether they are able to move. They are able to move the file to processed fodler successfully both in foreground and background mode.
Please help me in resolving this issue.
Thanks,
Deepa

Hi Sanu,
Please use teh following code to move the file from source to target folder.
This is a code showing how to create and use COPY command of UNIX in ABAP
PARAMETERS:
Input file path
p_input TYPE localfile,
Processed file path
p_proc TYPE localfile.
Declare the Types to file data
TYPES: BEGIN OF L_X_OUTPUT,
sys(200), " Please note, there are asterisk before and after sys (i.e.sys)
END OF L_X_OUTPUT.
* Internal table to store file data
DATA l_i_output TYPE STANDARD TABLE OF l_x_output WITH HEADER LINE.
* Variable for the UNIX command
DATA: l_v_unix_comm(255) TYPE c.
Copy command of UNIX
CONCATENATE 'mv' p_input p_proc
INTO l_v_unix_comm SEPARATED BY space.
For example the Copy command is stored as below
cp u2018/data/interfaces/input/input_fileu2019 u2018/data/interfaces/processed/processed_fileu2019
Examples of UNIX Command *u2022 mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a *different directory (see below) *u2022 cp filename1 filename2 --- copies a file
Execute the UNIX Copy command.
This command will copy the file from input file path to the processed file path
CALL 'SYSTEM' ID 'COMMAND' FIELD l_v_unix_comm
ID 'TAB'
FIELD l_i_output-sys.
IF sy-subrc eq 0.
write: 'File is copied successfully using UNIX command in ABAP'.
ENDIF.

Moving Image from one Review to Another?

I attempted to upload an image (open in Photoshop) to a specific review. However, I could not see the desired review in the Photoshop CS Review panel. Out of frustration - after attempting to "find" the desired review for several minutes - I uploaded the image to another review and then went online, using Safari, to Acrobat.com.
There is no visible means of moving an image from one review to another. There is a way of dragging one review (with all sub-images) to another location. But I can't see a way of moving a sub-image from one review to another review.
IF there is some "magic" that someone knows I would sure appreciate some education.

This works quite well for a single image review. I've moved them from one workspace to another. The issue is when a review has multiple images and you want to take only one of them from that review and move it to another review in another workspace; I can't seem to get that to work at all.
When I open a review and navigate to the desired image, then click in the lower left corner and select a new workspace to move the image to, it moves the entire review - not the single image - to the new workspace.
I guess I could delete the "part" from the workspace it currently exists in and then create it as a stand alone review, but then I won't be able to imbed it into another review as I want to do.
The source frustration here is that I can't get CS Review in CSPS5 to navigate to the desired workspace/review. I get "ALL REVIEWS" displayed but not the workspaces... Any ideas on how to display workspaces instead of reviews?

802.1X Authentication issues when moving between switch ports

Hi Guys,
We are having some issues at our office where when users move from one switch to another, the 802.1X authentication does not want to take place. The PC just gets an APIPA address. Now I have read about features that MAC Move and MAC replace but they seem to be used when moving from one port a switch to another port on that same switch. Will MAC move help for issues between switches? And should I focus my attention on the switch's configuration or have a look at the NPS server that might be blocking that authentication as the user is already authenticated?
My configuration we have on the switch ports look as follows:
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
dot1x pae authenticator
Your help is greatly appreciated.
Grant

Hi Neno,
Thanks for the reply. We are using NPS on a Server 2008 R2 virtual machine. The switches are stacked 2960S-48FPS-L running 15.0(2)SE. I will quickly do the debugs and get back to you.
Here is the config:
aaa group server radius customer-nps
server name radius1
server name radius2
aaa authentication dot1x default group radius
dot1x system-auth-control
radius server radius1
address ipv4 172.28.130.52 auth-port 1645 acct-port 1646
key 7 05392415365959251C283630083D2F0B3B2E22253A
radius server radius2
address ipv4 172.28.131.52 auth-port 1645 acct-port 1646
key 7 107C2B031202052709290B092719181432190D000C
interface GigabitEthernet1/0/1
switchport access vlan 300
switchport mode access
switchport voice vlan 2
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication periodic
authentication timer reauthenticate 28800
authentication timer inactivity 1800
mab
no snmp trap link-status
mls qos trust cos
dot1x pae authenticator
auto qos trust cos
storm-control broadcast level 1.00
storm-control multicast level 1.00
spanning-tree portfast
spanning-tree bpdufilter enable

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

Moving Stack from one folder to another?

Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
Thank you.

Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i.

Categorizing issues when moving Elements 10 from one PC running XP to Windows 7

Similar Messages

Maybe you are looking for