Category 3 Upgrade Steps for Rel 11i
Upgrading Oracle Applications Rel 11i manual page 4-2 lists three upgrade steps for Oracle Common Modules.
Step 1: Delete all AK data for Production 16 Global Demo databases (conditionally required)
Step 2: Check for invalid AK data in non-Global Demo databases (condionally required)
Step 3: Fix invalid data in non-Global Demo databases (conditionally required)
My Questions:
1. What is AK data?
2. What is the difference between a Global Demo database and a non-Global Demo database?
3. Does the AutoUpgrade utility migrate the data from the Global Demo and non-Global Demo databases to the Vision database?
null
I do not have any experience with standbys, but pl see if these MOS Docs can help
How To Upgrade A Primary Database And A Physical Standby To Oracle10gR2 (10.2) (Doc ID 407040.1)
Oracle11g Data Guard: Database Rolling Upgrade Shell Script (Doc ID 949322.1)
Applying Patch Sets / Interim Patches with Physical Standby Database in Place (Doc ID 187242.1)
Is it possible to use different RDBMS-releases on primary/standby within a Dataguard Configuration? (Doc ID 1294585.1)
HTH
Srini
Similar Messages
-
HI Friends,
I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
Thanks,
Regards,
SachinHI ,
System restart
run the SICK verify the installation check
Check developer traces on the operating system. Log on to
Check the installed license and profile configuration (RZ10 and PFCG)
confirm the operation modes
Perform a client copy
Check the status of the SAP Web AS Java and the user SAPJSF
Check the rdisp/j2ee_start profile parameter
Check the current state of SAP Web AS Java using transaction SMICM
SAP Load Generator
Start SAP Load Generator (SGEN)
Regards, -
Upgradation steps for FSG Reports from 11.5.10 to 12i and probable issues.
Hey i have one issue,
we are planning to upgrade FSG from 11.5.10 to 12i
i need steps to upgarde and what are probable issue while upgardation of FSG Reports.
If you have any link or document where we can see this its most welcome.
Many Thanks
SwapnilHi Swapnil ,
All upgrade steps (also for FSG if available) should be listed in the following manual:
Oracle® Applications
Upgrade Guide: Release 11i to Release 12
Release 12
Part No. B31566-01
Thanks,
KAR -
Upgradation steps for XI 3.0 to PI 7.0..?
Hi Folks,
Can anyone give me the steps to upgrade the xi 3.0 with some suport pack to pi 7.0 with some support pack. What i need is what are the consideration should be taken and poceedure to do it. What about the interfaces in xi.?
Thanks in advance.
Kiran ReddyHi,
Kiran search in sdn before posting the thread,the same question posted manyn times
There is no major challenges upgrading from XI 3.0 to PI7.0 its quiet easy and simple.
Regards,
Raj -
Hi Everyone
We will be upgrading our ACE 4710s from A3(2.2) to A4(1.0). We have a pair in high availability mode. Has anyone here got any tips on how we can get a smooth upgrade without downtime? Is this even possible?
Thanks
AOf course it is possible to upgrade with no downtime!
However it is always recommended to schedule the upgrade in a maintenance window to minimize the impact in case of any issues.
You can normally find the documented procedure here for the upgrade:
http://cco/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/admin/guide/upgrade.html#wp1012243
I find in fact the best would be the following:
1. Upgrade the stand by module first.
2. Once reloaded, switchover to the standby and verify all services working correctly.
3.Upgrade the new stand by module.
4. Eventually switch over again to restore the active box as per the original configuration.
By doing this, if for some reason the first switchover at point 2. would not work, you can switch back to a safe scenario which you are sure to work.
Cheers,
Domenico. -
11i Upgrade - Projects Pre-Upgrade steps
We are upgrading from 10.7SC to 11i (11.5.2) and in running several of the Category 2 pre-upgrade steps, we have found that only really old projects show up as exceptions that should be "fixed" prior to the upgrade.
These projects are now closed and the revenue/invoices etc. are for prior fiscal years. We will probably get accounting errors (from flexfield/acct combinations that have been disabled) if we try to process the old transactions. We are also not sure that we want to write revenue events or create changes for fiscal years already closed.
Has anyone else seen this? How did you handle it -- did you reopen projects, re-enable accounts and process the exceptions noted by the scripts? Will upgrade FAIL because of the presence of these exceptions?
Any input you can provide would be helpful.
Thanks in advance,
Maria
nullHi,
In your above output it will be
The Most Recent Release Patchsets on Metalink(Not Included Above) are:
=======================================================================================
ad R12.AD.A.6 7305220 08/11/05 11:14:22 Checkin Released By_Metalink
ad R12.AD.B.2 8502056 09/12/16 06:44:40 Checkin Released By_Metalink
ad R12.AD.B.3 9239089 10/07/07 14:22:15 Checkin Released By_Metalink
cdr R12.CDR.A 10161040 11/05/11 08:39:23 Checkin Released By_Metalink
cla R12.CLA.B 8506229 09/06/30 23:13:11 Checkin Released By_Metalink
Thanks -
Upgrade steps Details for 9.2.0.8 to 11.2.0.3 Database
Support,
We have one requirement from our client like "Upgrade the Database from 9.2.0.8 to 11.2.0.3". They are asking only the DB upgrade except Application.
Our Current Database is running in Solaris OS and DB is an 9.2.0.8 and Application is an 11.5.10.2.
I am going to follow the below documents for the Database Upgrade process using DBUA for First Iteration,
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585577.1)
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) (Doc ID 881505.1)
In the above documents they mentioned the steps related to the 11g new home installation and upgrade process but before starting the process what are all the things i have to check it in my current Database and Applications.
Because i have clear idea on what we have to do in the new Oracle Home 11g and the Upgrade process but still have some confusion on the Pre-Upgrade Steps in current database.
Kindly suggest me what are the details i have to collect and check in my Current Database or provide any proper Oracle documents for the Database Pre-Upgrade Process.
Thanks in advance,
Vijay.Vijay,
We would suggest you advice your customer to upgrade to 11.2.0.4 instead on 11.2.0.3
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) (Doc ID 881505.1)
https://blogs.oracle.com/stevenChan/entry/11_2_0_4_database
Preparing to Upgrade Oracle Database can be found at http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
You would also need to refer to:
How To Get The Proper Environment Set To Run Adbldxml.pl When Upgrading To 11g/11gR2? (Doc ID 1310854.1)
11i: ad_parallel_compile: Ora-01031: Insufficient Privileges in adadmin / re-create grants and synonyms for APPS schema after upgrade from 10gR2 to 11gR2 (Doc ID 1148264.1)
Note: Please note that we have a dedicated forum for EBS questions -- https://forums.oracle.com/community/developer/english/e-business_suite
Thanks,
Hussein -
11i upgrade - Step: Apply latest product patches (required)
Hi,
I am in the process of upgrading 11.5.9 (DB 9.2.0.4) to 12.1.1 (DB 10.2.0.5).
As part of the upgrade steps in document titled *"Oracle® E-Business Suite Upgrade Guide Release 11i to 12.1.1 Part No. / E16342-04 / August 2010"*, I was directed to apply the latest product patche. Chapter 3, section 5.
I downloaded the latest copy of the patchsets.sh from Oracle and ran it with the following parameters:
patchsets.sh connect=apps/<apps_password> available=metalink
This tool generated a bunch of reports including one called "Report.txt" and "Report_R12.txt"
Which one of these patches am I supposed to download and apply to be able to continue with the upgrade?
An excerpt From "Report.txt":
=============================================================================
Report Generated: Fri Sep 16 15:34:12 EDT 2011 Tool Version: 4.52
Patchsets List Updated: Sep 15 22:30
Machine/OS: Linux xxxxxxxxxxxxxxxxxxxx 2.6.9-101.ELlargesmp #1 SMP Fri May 27 19:07:07 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
Domain:
applptch Source: Patch.csv
Version from APPLPTCH: 12.1.1
Database: PROD
Limited Report to: APPLFULL and APPLSHAR products
APPLFULL: AK ALR AP AR AS AX AZ BNE CE CHV EC ECX EDR FA FND FRM FV GHR GL GMS HZ IBY ICX IGI IGW ITG JTF JTM PA PER PN PO PQH PSA PSB PSP RG SSP
APPLSHAR: AD AMV ASO AU BEN BOM CRP CS CUA DT ENG FF INV MFG MRP ONT PAY QA QP SHT WIP XLA
Pseudo Products: ADO AHL AME AML AMS AMW ASF ASG ASL ASN ASP AST BIC BIL BIM BIS BIV BIX BPA BSC CAC CCT CDR CLA CLE CLJ CLL CLN CN CSC CSD CSE CSF CSI CSK CSL CSM CSP CSR CSZ CTB CUG CZ DDD DDR DNA DOM DPP EAM EDW EGO ENI EWS FEM FII FLM FPA FTE FTP FUN FWK GCS GHG GMA GMD GME GMF GMI GML GMO GMP GR HCP HCT HRI HXT IA IBC IBE IBU IBW IEB IEC IEM IEO IES IEU IEX IGP IGR IGS IMC INL IPA IPM IRC ISC ITA ITM IZU JA JAI JE JG JL JMF JTA JTH JTO JTT JTY LNS MSC MSD MSE MSO MSR MST MTH MWA OAM OCM OE OIE OIR OKC OKE OKI OKL OKS OKX OPI OTA OWF OZF PFT PJB PJC PJF PJI PJL PJM PJR PJT PMI POA POM PON POS PQP PRP PV QOT QPR QRM RCI RLM RRS TXK UMX VEA WMS WPS WSH WSM XDO XDP XLE XNB XNP XTR ZPB ZX
Written By: Oracle Support, SSANDREW
WARNING: DOWNLOAD CHANGING NOVEMBER 3rd, 2006
Program Updates: ftp://ftp.oracle.com/support/outgoing/PATCHSET_COMPARE_TOOL
Download Patchsets: Go to link below or click on Patches
http://metalink.oracle.com/metalink/plsql/dis_download.startup
=============================================================================
Applied Patchsets that Match ARU:
FAMILY PACKS
Prod Patchset Bug RELEASED Release Status Distribution
=======================================================================================
atg_pf R12.ATG_PF.A.1 5907545 07/04/15 23:44:46 Checkin Released Not_Distributed
atg_pf R12.ATG_PF.A.2 5917344 07/07/13 05:48:57 Checkin Released Not_Distributed
atg_pf R12.ATG_PF.A.3 6077669 07/10/14 21:48:17 Checkin Released Not_Distributed
atg_pf R12.ATG_PF.A 4461237 07/01/18 17:08:25 Checkin Released Not_Distributed
atg_pf R12.ATG_PF.A.4 6272680 08/01/13 09:10:12 Checkin Released By_Metalink
atg_pf R12.ATG_PF.B.1 7307198 09/04/07 22:45:29 Checkin Released Not_Distributed
APPLIED PATCHSETS
Prod Patchset Bug RELEASED Release Status Distribution
=======================================================================================
ado R12.ADO.B.1 7460276 09/04/07 22:19:25 Checkin Released Not_Distributed
ado R12.ADO.B 6867824 08/08/11 22:59:18 Checkin Released Not_Distributed
ad R12.AD.A.1 5905728 07/04/13 13:11:10 Checkin Released Not_Distributed
ad R12.AD.A.2 6014659 07/07/13 05:30:06 Checkin Released Not_Distributed
ad R12.AD.A.3 6272715 07/10/14 17:33:24 Checkin Released Not_Distributed
ad R12.AD.A 4502962 07/01/18 17:08:25 Checkin Released By_Metalink
ad R12.AD.A.4 6510214 08/01/13 07:38:00 Checkin Released By_Metalink
The Most Recent Release Family Packs on Metalink(Not Included Above) are:
=======================================================================================
atg_pf R12.ATG_PF.A.6 7237006 08/11/05 20:30:52 Checkin Released By_Metalink
atg_pf R12.ATG_PF.B.2 7651091 09/12/16 08:03:30 Checkin Released By_Metalink
atg_pf R12.ATG_PF.B.3 8919491 10/07/08 01:40:33 Checkin Released By_Metalink
cc_pf R12.CC_PF.A.6 7291073 08/11/06 03:57:36 Checkin Released By_Metalink
cc_pf R12.CC_PF.B.2 8522000 09/12/17 01:08:48 Checkin Released By_Metalink
The Most Recent Release Patchsets on Metalink(Not Included Above) are:
=======================================================================================
ad R12.AD.A.6 7305220 08/11/05 11:14:22 Checkin Released By_Metalink
ad R12.AD.B.2 8502056 09/12/16 06:44:40 Checkin Released By_Metalink
ad R12.AD.B.3 9239089 10/07/07 14:22:15 Checkin Released By_Metalink
cdr R12.CDR.A 10161040 11/05/11 08:39:23 Checkin Released By_Metalink
cla R12.CLA.B 8506229 09/06/30 23:13:11 Checkin Released By_Metalink
Base Patchset List for 12.1.1 included below:
=============================================================================
7461070 - R12.AD.B.1 ad 10-APR-09 Checkin Released By_Metalink
6665350 - R12.AD.B ad 13-AUG-08 Checkin Released Not_Distributed
7458155 - R12.AD.B.1 ad 08-APR-09 Checkin Released Not_Distributed Thanks,
SinanHi,
In your above output it will be
The Most Recent Release Patchsets on Metalink(Not Included Above) are:
=======================================================================================
ad R12.AD.A.6 7305220 08/11/05 11:14:22 Checkin Released By_Metalink
ad R12.AD.B.2 8502056 09/12/16 06:44:40 Checkin Released By_Metalink
ad R12.AD.B.3 9239089 10/07/07 14:22:15 Checkin Released By_Metalink
cdr R12.CDR.A 10161040 11/05/11 08:39:23 Checkin Released By_Metalink
cla R12.CLA.B 8506229 09/06/30 23:13:11 Checkin Released By_Metalink
Thanks -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
Intsallation steps for Oracle Applications 11i(11.5.10.1)
Hello All,
Please some one provide me the installation steps for installing Oracle Applications 11i(11.5.10.1) in my local PC.
I got a 5 DVD media pack. I require only Vision database instance(for learning purpose).
Regards,
KiranHi Kiran;
Please some one provide me the installation steps for installing Oracle Applications 11i(11.5.10.1) in my local PC.Please follow below and see its helpful:
Subject: Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) Doc ID: 316806.1
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
I got a 5 DVD media pack. I require only Vision database instance(for learning purpose).You have to create stage area. Please follow below and see its helpful:
Re: 12.1.1 on windows 2003
Creating Stages of R12 on Windows
Regard
Helios -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
Any info on the steps required to do the Upgrade / Conversion for PO from 11.0.3 to 11.5.10 will be appreciated.
ThanksDo you just want to convert PO's or all open items such as AP invoices etc.? If you are just talking PO information, there is an interface table available in 11.5.10 that was not available in 11.0.3 to convert PO information. Please look at the Open Interface Manual for Manufacturing to get details.
-
Steps for upgrade to GRC 5.3
HI Folks,
I would really appreciate if I can know the steps for GRC upgarde to 5.3 from 5.2. The only components we use are CC and firefighter.
Is there any need to backup anything before the upgrade except the database and filesystem?
Regards,Hi,
Check this upgrade guide at service marketplace, might be useful to you-
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718186&
Goto SAP GRC Access Control 5.3-Upgrade Guide - SAP GRC Access Control 5.3
Regards,
Sabita -
Steps for upgrading 2005B to 2007B
Hi
I am not able to upgrade 2005 B to 2007 B.
Can u give me step by step instructions which is helpful for updating the B1.
ThanksHi Pari,
the IRU (Internal Reconciliation Upgrade) happens when you upgrade to version 2007. Reason being the completely redisigned & merged reconciliation engines.
SAP developed & made the pre-upgrade tools for the A & B versions available, such that partners can test the potential impact of the historically existing reconciliation inconsistencies in their customers' databases. Thus, no partner is unprepared when upgrading the live system & is then also familiar with & comfortable in explaining to the customer how SAP Business One automatically created journals with a balance due that have to be reconciled.
All information on the [IRU landing page|https://websmp108.sap-ag.de/~sapidb/011000358700000380562007E] is relevant for all partners whose customers are upgrading to 2007.
Please note that further information regarding any Upgrades of SAP Business One can be found within the Accelerated Upgrade Program (B1AUP).
This is a comprehensive upgrade methodology created by SAP with the help and input of certain partners.
Please refer to http://service.sap.com/smb/sbo -> expand 'A-Z Index' and click on 'A-Z Snapshot'. Under topic 'A-C' click on Accelerated Upgrade Program (B1AUP)
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team -
Apply Developer 6i Patch set 19 (6194129) for EBS 11i
Hi hussein,
EBS 11i
RHEL 4.6
I want to appy the latest Dev 6i patch 19 on our EBS 11i, using the note:
Upgrading Developer 6i with Oracle Applications 11i [ID 125767.1]The notes said:
Step 2: Download the latest Certified Developer 6i Patchset and Applications Interoperability Patch
Patch 6194129
Patch 9935935
I can not understand this conflicts of CPU patches mentioned above :(
Do I just apply the following patches on my linux server?
9863561,
6125732,
6857221,
5232832,
8888184,
7329300,
6747939,
7552880
So all in all, I have to apply 10 patches to complete the task?
Thanks a lot,
Ms IndayThanks hussein, helios :)
Actually,
Apply Developer 6i Patch set 19 (6194129) for EBS 11i is just part of the main note/docs which is
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.1) [ID 1265268.1]From the notes above, I have compiled all the necessary patches to apply:
2574342
3830807
4547809
5232832
5571663
5644137
6125732
6194129
6241631
6400762
6747939
6857221
7329300
7552880
8405205
8570322
8667727
8685327
8761974
8771297
8772028
8796511
8815204
8826546
8888184
8897784
8964142
9094950
9835302
9863561
9876919
9935935These 32 patches can be "all" at once applied before the database upgrade right?
Maybe you are looking for
-
Print Service- SMB - Can't get jobs to print on shared HP printer via SMB
I have been banging my head on the wall on this one, and a call to Apple support ended up with a lot of diags followed by "It must be the printer driver, call HP" Has anyone successfully shared HP Officejet/Deskjet/Photosmart printers from Mac OS X 1
-
I am trying to use an case staemnet in oracle create table test1 (Status varchar2(10); declare Status varchar2(02); begin Status := '1' insert into test1 values (case Status when '1' then 'CREATE' when '2' then 'UPDATE' when '3' then 'DELETE else 'IN
-
Importing a designer 6i repository into a 10g database?
Hi, I have a Designer 6i repository sitting in an 8.1.7.4 database and I would like to get rid of that database by importing the repository into a 10g or 11g database. My question is can this be done and have Designer 6 still working? If so, how easi
-
I just downloaded Firefox 4. The download folder appeared, plus the drive image. I've closed the download folder, and deleated the disc image after closing Firefox. However the next time I click on Firefox in my dock...the download folder and disc im
-
Hello I have made a slide show and I will be showing it threw a projector and I do not know how to make the slide show full screen. So how do i make the show be full screen? Thanks Greg Wyatt