Category Axis for dates display problems

I am experiencing an odd display behavior in my flex chart.
The xml for the chart skips some time, for example:
<item date="10/31/2006" val="57"/>
<item date="12/27/2006" val="55"/>
<item date="02/14/2007" val="44"/>
<item date="02/22/2007" val="43"/>
<item date="02/28/2007" val="59"/>
<item date="02/28/2007" val="58"/>
<item date="03/03/2007" val="35"/>
But when it displays on the axis, it displays the labels like
so:
10/31/2006 2/22/2007 03/03/2007 etc....
Here is my definition of the CategoryAxis.
<mx:horizontalAxis>
<mx:CategoryAxis id="h1" categoryField="date"
labelFunction="formatLabel"
dataProvider="{instrument.lastResult.dataset.rightaxis.series.item}"
title="{instrument.lastResult.dataset.bottomTitle}"/>
</mx:horizontalAxis>
Is this a bug? The chart uses two vertical axis as well.
Maybe this is causing the problem. Ideally I'd just like to define
a start and end date for the bottom axis and have it display the
months uniformly. Is there a way to do that or at least fix this
odd behavior?

I am experiencing an odd display behavior in my flex chart.
The xml for the chart skips some time, for example:
<item date="10/31/2006" val="57"/>
<item date="12/27/2006" val="55"/>
<item date="02/14/2007" val="44"/>
<item date="02/22/2007" val="43"/>
<item date="02/28/2007" val="59"/>
<item date="02/28/2007" val="58"/>
<item date="03/03/2007" val="35"/>
But when it displays on the axis, it displays the labels like
so:
10/31/2006 2/22/2007 03/03/2007 etc....
Here is my definition of the CategoryAxis.
<mx:horizontalAxis>
<mx:CategoryAxis id="h1" categoryField="date"
labelFunction="formatLabel"
dataProvider="{instrument.lastResult.dataset.rightaxis.series.item}"
title="{instrument.lastResult.dataset.bottomTitle}"/>
</mx:horizontalAxis>
Is this a bug? The chart uses two vertical axis as well.
Maybe this is causing the problem. Ideally I'd just like to define
a start and end date for the bottom axis and have it display the
months uniformly. Is there a way to do that or at least fix this
odd behavior?

Similar Messages

  • PHP MySQL data display problem

    I am having trouble getting data to display on my web page.In Dreamweaver CS3, I created a new page.
    Selected PHP as the type.
    Saved it.
    Connected a database and created a recordset (all using Dreamweavers menus. I did not write any code).
    NOTE: The database is on a remote server.
    The TEST button displayed the records from the recordset with no problem.
    On the new page, I then typed some text.
    Then dragged some fields from the Bindings tab to the page.
    I saved it and then went to preview it in my browser.
    The page comes up completely blank. Not even the text shows.
    I then saved the page as an HTML page.
    When I preview this in my browser, the text shows, but the fields and data do not.
    I then tried creating a dynamic table (again, using the Dreamweaver menus.).
    A similar thing happens, ie. If I save it as an HTML, the text shows and the column labels and border shows, but no data.
    Nothing shows if I save it as a PHP file.
    I can view the data online using files created by PHPMagic, so I know the data is there and retrievable.
    It is just in pages created in Dreamweaver that don’t work.
    What am I doing wrong?

    My web server supports PHP. I can disply PHP pages created by other software packages, just not the Dreamweaver ones.
    Frank
    Date: Thu, 4 Jun 2009 19:04:03 -0600
    From: [email protected]
    To: [email protected]
    Subject: PHP MySQL data display problem
    To view php pages - or pages with PHP code in them - in a browser, the page must be served up by a Web server that supports PHP. You can set up a testing server on your local machine for this purpose. Look for WAMP (Windows), MAMP (Mac), or XXAMP for some easily installed packages.
    Mark A. Boyd
    Keep-On-Learnin'
    This message was processed and edited by Jive.
    It shall not be considered an accurate representation of my words.
    It might not even have been intended as a reply to your message.
    >

  • Date display problems

    Hello,
    I have notice some date display problems with browsers when visiting a Podcast page :
    https://itunes.apple.com/fr/podcast/euronews-no-comment/id193275779
    For exemples :
    8/45/13
    8/32/13
    4/49/13
    Date problems available on other podcasts :
    https://itunes.apple.com/fr/podcast/arret-sur-images-les-podcasts/id289722236?mt =2
    https://itunes.apple.com/fr/podcast/telezapping/id206252481?mt=2
    https://itunes.apple.com/fr/podcast/france-3-19-20-paris-ile-france/id285421036? mt=2
    Theses problems don't exist on iTunes.
    Who can fix it ?

    I checked three of them and see the same peculiarity. Only the web page version of the Store page has the errors. The first podcast you list has a minor error in the 'iTunes declaration'  but I wouldn't have expected it to affect the pubDate tag. The second doesn't give the day in that tag, and the third appears to be OK.
    I can only guess that it's a glitch of some sort in the Store software used to generate the web page. Only Apple can fix it. You could try the 'report a problem' link in the Store page in iTunes though I don't know how much notice they will take.

  • Multiple Language  : Data Display Problem

    Hi ,
    I have one problem regarding NLS_LANG, please advice.
    I have a table on source machine which stores the data in different language (German, Danish, Russian Cyrillic) but these data shows as "???????" on command prompt as well as on Toad when access it from client machine.
    I know that displaying any kind of data depends on local NLS_LANG but what NLS_LANG I have to set so that it can display different language together. I am able to display data separately for German, Danish and Russian Cyrillic when I change NLS_LANG and location in client accordingly but unable to display all language together.
    Default setting for NLS_LANG on client machine is AMERICAN_AMERICA.WE8MSWIN1252.
    Please advise common NLS_LANG for all three language (German, Danish, Russian Cyrillic).
    Thanking You

    Pl continue the discussion in your original thread for continuity purposes.
    Multiple data display problem

  • Date display problem "Arabic"

    I am currently facing a problem related to date display as the date is being displayed in the following format:
    ������ 01, 2007
    I have checked the Locale and it was en_US.
    Can someone help me out so that the format that I get is the following:
    Sept 01, 2007
    Thanks

    What code are you using to format the date?

  • Help Required for date display & mutating trigger

    Hai all..
    I need clarification for 2 problems.
    Problem 1
    Is there a possibility to display the values with a date range.
    I mean if there is no data for a particular date within the given range. it should display some null value.
    Eg.
    table name : sample
    Sno Date1 Name desgn
    1 1-may-2004 xyz engr
    1 3-may-2004 xyz engr-1
    1 4-may-2004 xyz engr-2
    The query is
    select * from sample where date1 between '01-may-2004' and '04-may-2004'.
    The result of query will be
    Sno Date1 Name desgn
    1 1-may-2004 xyz engr
    1 3-may-2004 xyz engr-1
    1 4-may-2004 xyz engr-2
    But i need the result to be displayed as
    Sno Date1 Name desgn
    1 1-may-2004 xyz engr
    nil 2-may-2004 nil nil
    1 3-may-2004 xyz engr-1
    1 4-may-2004 xyz engr-2
    Pls let me know how to achieve this.
    Problem 2:
    While i am updating a value using a trigger.
    I am getting "mutating" error.
    Is there a possibility to avoid the mutation.
    The two triggers i am using is
    Trigger 1
    CREATE OR REPLACE TRIGGER TRIG_DURATION_UPDATED
    AFTER UPDATE ON
    TIMESHEET_DATA
    FOR EACH ROW
    DECLARE
    ID_COUNT DATE;
    A date;
    NN NUMBER;
    AA NUMBER;
    NN1 NUMBER;
    BEGIN
    b_dur :=0;
    IF UPDATING('PROGRESS') THEN
    SELECT COUNT(1) INTO AA FROM TIMESHEET_DATA_PAUSE WHERE DATA_sNO = :OLD.DATA_SNO AND EMP_ID = :OLD.EMP_ID AND
    ACNUM = :OLD.ACNUM AND DURATION IS NULL;
    IF AA > 0 THEN
    SELECT to_date(START_TIME,'DD-MON-YYYY HH:MI AM') into a FROM TIMESHEET_dATA_PAUSE WHERE
    EMP_ID = :NEW.EMP_ID AND ACNUM = :new.acnum AND DATA_SNO = :new.data_sno AND pause_TIME IS NULL
    AND DURATION IS NULL;
    select to_date(sysdate,'DD-MON-YYYY HH:MI AM') into id_count from dual;
    SELECT A - ID_COUNT INTO NN FROM DUAL;
    SELECT round(TRUNC(NN*24),2) INTO NN1 FROM DUAL;
    UPDATE TIMESHEET_dATA_PAUSE SET DURATION = NN1,PAUSE_TIME = SYSDATE WHERE
    EMP_ID = :NEW.EMP_ID AND ACNUM = :new.acnum
    AND DATA_SNO = :new.data_sno AND pause_TIME IS NULL AND DURATION IS NULL;
    END IF;
    END IF;
    END;
    Trigger 2
    CREATE OR REPLACE TRIGGER TRIG_DURATION_UPDATED_PAUSE
    AFTER UPDATE ON
    TIMESHEET_DATA_PAUSE
    FOR EACH ROW
    DECLARE
    ID_COUNT DATE;
    A_COUNT NUMBER(10);
    A date;
    NN NUMBER;
    AA NUMBER;
    NN1 NUMBER(10,2);
    BEGIN
    IF UPDATING('DURATION') THEN
    SELECT COUNT(1) INTO A_COUNT FROM TIMESHEET_DATA WHERE DATA_sNO = :new.data_sno AND EMP_ID =:new.EMP_ID
    AND ACNUM = 'ACNUM' AND DURATION IS NULL;
    IF A_COUNT >0 THEN
    SELECT NVL(SUM(DURATION),0) INTO NN1 FROM TIMESHEET_DATA_PAUSE WHERE DATA_sNO = :new.data_sno AND EMP_ID =:new.EMP_ID AND ACNUM = :NEW.ACNUM;
    UPDATE TIMESHEET_DATA SET DURATION = NN1 WHERE DATA_sNO = :new.data_sno AND EMP_ID =:new.EMP_ID AND ACNUM = :NEW.ACNUM AND DURATION IS NULL;
    END IF;
    END IF;
    EXCEPTION WHEN DUP_VAL_ON_INDEX THEN
    DBMS_OUTPUT.PUT_LINE ('CANNOT INSERT');
    END;
    Pls let me know the solutions for the two..
    Thanks in Advance
    Gaya3

    In future please start two threads when you have two questions to ask. Othewise it makes things difficult to follow and may well lead to some of your questions not getting an answer. Unlike some other sites there is no limit to the number of posts we can have :)
    To answer your first question:
    If you have Oracle9i you can do this using a PIPELINED function to act as a pivot table (in earlier versions you will have to have a table of some description - ALL_OBJECTS will do in a pinch).
    CREATE OR REPLACE TYPE t_dates AS TABLE OF DATE
    CREATE OR REPLACE FUNCTION f_dates
      (st IN DATE, cnt IN INTEGER) RETURN t_dates
      PIPELINED
    AS
      dd date;
    BEGIN
      FOR a IN 1..cnt LOOP
        SELECT  st + (a-1)
          INTO  dd
          FROM  dual;
        PIPE ROW (dd);
      END LOOP;
      RETURN;
    END f_dates;
    /So, given this data...
    SQL> select * from t57
      2  /
          COL1 COL2
             3 05-MAY-04
             4 06-MAY-04
             5 07-MAY-04
             6 12-MAY-04
             8 15-MAY-04
    5 rows selected.
    SQL>...we can run this query...
    SQL> SELECT nvl(to_char(t.col1), 'Nil'), dd.ndate
      2  FROM   t57 t
      3         , ( select column_value AS ndate from table(cast(f_dates(trunc(SYSDATE), 11) AS t_dates))) dd
      4  WHERE trunc(dd.ndate) = trunc(t.col2(+))
      5  /
    NVL(TO_CHAR(T.COL1),'NIL')               NDATE
    3                                        05-MAY-04
    4                                        06-MAY-04
    5                                        07-MAY-04
    Nil                                      08-MAY-04
    Nil                                      09-MAY-04
    Nil                                      10-MAY-04
    Nil                                      11-MAY-04
    6                                        12-MAY-04
    Nil                                      13-MAY-04
    Nil                                      14-MAY-04
    8                                        15-MAY-04
    11 rows selected.
    SQL> Obviously, you will want to tidy up the function to suit your needs.
    Cheers, APC

  • Multiple data display problem

    Hi ,
    I have one problem regarding NLS_LANG, please advice.
    I have a table on source machine which stores the data in different language (German, Danish, Russian Cyrillic) but these data shows as "???????" on command prompt as well as on Toad when access it from client machine.
    I know that displaying any kind of data depends on local NLS_LANG but what NLS_LANG I have to set so that it can display different language together. I am able to display data separately for German, Danish and Russian Cyrillic when I change NLS_LANG and location in client accordingly but unable to display all language together.
    Default setting for NLS_LANG on client machine is AMERICAN_AMERICA.WE8MSWIN1252.
    Please advise common NLS_LANG for all three language (German, Danish, Russian Cyrillic).
    Thanking You

    Similar issue has been discussed in the below thread :
    NLS_LANG setting for a client with multiple Oracle servers
    Re: how to insert multi language data to oracle database
    You can use iSQL*Plus which have Multiple Language Support.
    http://docs.oracle.com/cd/B19306_01/server.102/b14357/ch11.htm#i1026151
    You can write the question in Globalization Support forum too at :
    Globalization Support
    Regards
    Girish Sharma

  • Creating pop up window for data display in ALV

    Friends,
    I need to display my data in alv popup window from there I have to select a row and display the data in new popup window. For this purpose I had written this fuction. It's working fine But I don't know how to select row from this and display data in new popup window.  when I am displaying data in alv grid ,then I am  able to display data in POPUP window after selecting a row from grid  but dont know how to jump from one pop up window to another.
    form output_alv.
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
        I_TITLE                       = 'SALES ORDER INFO'
        I_ZEBRA                       = 'X'
        I_TABNAME                     = 1
        I_STRUCTURE_NAME              = 'VBAK'
      TABLES
        T_OUTTAB                      = it_vbak
       EXCEPTIONS
         PROGRAM_ERROR                 = 1
         OTHERS                        = 2.
    endform.

    The following code may be of some help:
    DATA: BEGIN OF it_prmhlp OCCURS 0.
            INCLUDE STRUCTURE zaltab_param.
    DATA: flg(1) TYPE c,
          END OF it_prmhlp.
      DATA: wreturn LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        wstep LIKE sy-stepl.
      DATA wsel1 VALUE 'X'. wsel1 = 'X'.
      TYPE-POOLS : slis.
      DATA : listtitle(30),
             l_lines     LIKE sy-tabix,
             ls_fldcat   TYPE slis_fieldcat_alv,
             lt_fldcat   TYPE slis_t_fieldcat_alv,
             ls_selfield TYPE slis_selfield.
      progname = sy-repid.
      dynnum   = sy-dynnr.
      DEFINE fldcat_add1.
        ls_fldcat-fieldname     = &1.
        ls_fldcat-ref_tabname   = &2.
        ls_fldcat-ref_fieldname = &3.
        ls_fldcat-reptext_ddic  = &4.
        ls_fldcat-outputlen     = &5.
        append ls_fldcat to lt_fldcat.
      END-OF-DEFINITION.
      REFRESH : lt_fldcat.
      fldcat_add1 'AUREL' 'ZALTAB_PARAM' 'AUREL' 'Alloc Table Relevancy' '25'.
      fldcat_add1 'PDESC' 'ZALTAB_PARAM' 'PDESC' 'Process Description' '40'.
      REFRESH it_prmhlp. CLEAR it_prmhlp.
      SELECT * FROM zaltab_param
        INTO TABLE it_prmhlp
        WHERE tcode = sy-tcode.
      SORT it_prmhlp BY aurel pdesc.
      listtitle = 'Allocaction Table Relvancy Selection'.
      CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
           EXPORTING
                i_title                 = listtitle
                i_selection             = wsel1
                i_zebra                 = ' '
                i_checkbox_fieldname    = 'FLG'
                i_tabname               = 'IT_PRMHLP'
                it_fieldcat             = lt_fldcat
           TABLES
                t_outtab                = it_prmhlp
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2
      DATA wfl1. CLEAR wfl1.
      LOOP AT it_prmhlp.
        IF it_prmhlp-flg = 'X'.
          IF wfl1 = 'X'.
            CLEAR it_prmhlp. REFRESH it_prmhlp.
            MESSAGE i000(yw) WITH 'Only 1 entry can be selected...'.
            EXIT.
          ENDIF.
          wfl1 = 'X'.
        ENDIF.
      ENDLOOP.
      IF wsel1 = 'X'.
        READ TABLE it_prmhlp WITH KEY flg = 'X'.
        IF sy-subrc EQ 0.
          paurel = it_prmhlp-aurel.
          paureltx = it_prmhlp-pdesc.
          wvariant = it_prmhlp-zvariant.
          PERFORM update_screen.
        ELSE.
          CLEAR it_prmhlp. REFRESH it_prmhlp.
        ENDIF.
      ENDIF.
    The trick lies in using the box fieldname which is 'FLG' in this case and the wsel1 param passed to the fm to know whether any row is selected or not.

  • Date Display Problem

    Hello All,
    I have 2 text fields, namely, "Start Date" and "End Date". I am trying to set default text in these fields. The start date should default to Monday and End date should default to Friday of current week. My problem is the setText() Method accepts String as arguments but "cal.add(.." returns a calendar object. Is there anyway i can convert a calendar object to string? or is there some other way to achieve what i am trying to? Please help!!
    Below is my code.
    * This method gets the corr. day for the entered date
    public static int getDay(Date date){
    Calendar cal = Calendar.getInstance();
    cal.setTime(date);          
    return cal.get(DAY_OF_WEEK);     
    * This method sets default text in the fields "Start Date" and "End Date"
    private void setDefaultText(){                    
    int currentDay = getDay(currentDate); //Current Date is todays date
    Calendar cal = Calendar.getInstance();
    if(currentDay==1){
    getStartDateText().setText(cal.add(Calendar.DATE,1));                         
    getEndDateText().setText(cal.add(Calendar.DATE,5));
    if(currentDay==2){
    getStartDateText().setText(cal.add(Calendar.DATE,0));                         
    getEndDateText().setText(cal.add(Calendar.DATE,4));
    if(currentDay==3){
    getStartDateText().setText(cal.add(Calendar.DATE,-1));                         
    getEndDateText().setText(cal.add(Calendar.DATE,3));
    if(currentDay==4){
    getStartDateText().setText(cal.add(Calendar.DATE,-2));                         
    getEndDateText().setText(cal.add(Calendar.DATE,2));
    if(currentDay==5){
    getStartDateText().setText(cal.add(Calendar.DATE,-3));                         
    getEndDateText().setText(cal.add(Calendar.DATE,1));
    if(currentDay==6){
    getStartDateText().setText(cal.add(Calendar.DATE,-4));                         
    getEndDateText().setText(cal.add(Calendar.DATE,0));
    if(currentDay==7){
    getStartDateText().setText(cal.add(Calendar.DATE,-5));                         
    getEndDateText().setText(cal.add(Calendar.DATE,-1));
    }

    Mogambo_Khush_Hua wrote:
    I am sorry that did not work either. Calendar returns a string for toString(). I agree. But Calendar.add(int,int) does not as add(int,int) returns VOID. Here is what i tried doing as was suggested in the earlier postings.
    if(currentDay==1){
         getStartDateText().setText((cal.add(Calendar.DATE,1)).toString());
         getEndDateText().setText((Calendar.add(Calendar.DATE,5)).toString());
    If you notice the 2nd line reads cal.add and the 3rd line reads as Calendar.add.
    The 2nd line gives me an error, "Cannot Invoke toString() on primitive type void"
    The 3rd line gives me an error, "The method add(int,int) from type Calendar is not static"
    Any help would be greatly appreciated. Googling for stuff is not getting me anywhere either.You can't do it in one operation (at least not that way).
    The add() method operates on cal and changes it's value, but returns you nothing; so what you are in effect saying is:+nothing+.toString();which is what the compiler is complaining about.
    Hope that helps.

  • N8 Date Display Problem

    I've previously posted this in a similar thread, but recieved no replies, so am trying here.
    I've have a problem after the getting the Anna update.
    Got mine done at an NCC (UK Tesco 059C951). and all was fine. Put in parts 1/2 & 2/2 when I got home via Ovi Suite on PC.
    I have the problem in that the date format in my phone keeps reverting to YYYY:MM:dd format instead of DD:MM:YYYY as i'd like it.
    I've done a delete and restore and default reset to see if it cures it, but to no avail. I can't reinstall yet as Anna is not available for my Product code yet.
    In the" time settings", when I select the format I want, it switches back right in front of my eye's in about a second flat. I have to hit the back button before it changes back as that is the only way it remains.
    Once I turn off the phone, it reverts back to the yyyy:mm:dd settings again and I have to repeat the whole process again.
    It used to do this with PR1.1 and 1.2 sometimes, but a "delete and restore" usually cleared it. Hasn't worked this time though.
    Does anyone else have this problem or know what to do?
    Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
    N8-00 Tesco UK 059C951, Lumia 920

    What code are you using to format the date?

  • Fieldpoint FP-1600 Data Display Problem

    I'm building a new system using the following devices:
    Fieldpoint Ethernet module (FP-1600)
    Analog input module (FP-AI-111)
    Fieldpoint Explorer (V.2.0 build 91)
    Lookout (V4.5 build 9, for Win32)
    When I use Fieldpoint explorer I have no trouble displaying the data from
    the one analog input module; However, when I attempt to display the data in
    Lookout I receive a box with a zero and red X. The alarm also alerts a "Bad
    quality received from network module" alarm.

    Never mind - operator error!
    I did not check over the IP addresses correctly.
    > I'm building a new system using the following devices:
    > Fieldpoint Ethernet module (FP-1600)
    > Analog input module (FP-AI-111)
    > Fieldpoint Explorer (V.2.0 build 91)
    > Lookout (V4.5 build 9, for Win32)
    >
    > When I use Fieldpoint explorer I have no trouble displaying the data from
    > the one analog input module; However, when I attempt to display the data
    in
    > Lookout I receive a box with a zero and red X. The alarm also alerts a
    "Bad
    > quality received from network module" alarm.
    >
    >

  • Forms 6i Data Display Problem

    All:
    I am running Forms 6i on win 2k server. The problem I have is that when trying to display a field that has data longer than the size of the field the data becomes left justified. Meaning by placing the cursor on the field and using back arrow the rest of the data gets displayed.
    Thanks in advance..
    Rycourt

    If it is server and DataBase is installed(oracle-sql) is there, You cna't continue Froms and Reports there, Froms and Report can only run on client end and with pc where inatall Oracle Personal Database.
    If you try this way, Hope problem will solved
    Thanks
    Nazmul

  • Htree data display problem...

    hi...
    i have 1 datablock having ID field of 1 table... On the layout wizard i have added Htree item.... also i have 1 recordgroup ..
    i have set record group property of HTree to my recordgroup..so why it is not showing any data....
    i am getting folowing msg when i run the form.....
    FRM-32089: Trees must be in single row, single item blocks.
    Hierarchical Tree Item TREE1
    Item: TREE1
    Block: REGION
    Form: HTREE
    FRM-30085: Unable to adjust form for output.

    The online help isn't much use if you don't already know the form the query should take. Perhaps if it were in the Populating a Tree of Creating a Tree examples there would be less confusion. It appears in the help for the Set_Tree_Property procedure but is not explained there.
    The query they use is
    'select 1, level, ename, NULL, to_char(empno) ' ||
    'from emp ' ||
    'connect by prior empno = mgr ' ||
    'start with job = ''PRESIDENT'''
    The 5 columns you need to select, in this order, are
    1) Node State: either 1 or -1, to set the node as expanded or collapsed (not necessarily in that order)
    2) Level: the level in the hierarchy
    3) Label: the node's label, visible in the tree
    4) Icon: the icon to be displayed, or NULL for no icon
    5) Value: an arbitrary character value to apply to the node. It isn't visible to the user but you can get the Value at runtime in your code. Use this to store the primary key of the record represented by the node if you want to be able to manipulate that record or query child records when the node is selected.

  • SONY answers for mini display problems

    I have successfully hooked up my SONY KD-34XBR960 via the HDMI input to work with my new Mac mini. Most of the explanations in the forum about how to do this were incomplete, and lacking a final (albeit obvious) step. I followed the directions listed here: http://tenant.com/mini.php
    We used a DVI to HDMI conversion cable and DisplayConfigX. After setting the new display parameters with DisplayConfigX, you still need to change to that display setting in the OS. Then you'll get a picture. You can play with settings a bit and will probably have to adjust for overscan, but it works very well, and the picture is amazing. Text is very readable, and the digital video playback is as good as my high end dvd player. I am glad we have this forum to talk about solutions to tech problems, Apple's tech support people couldn't have been less helpful or more clueless.

    The resolution of my Sony with the Mac is 1192x680 which is 720p according to Michael and Jim at http://tenant.com/mini.php.
    I am very happy with the Sony Wega 60XS955. The image quality is pretty good on analog and excellent on digital/HD. The mac mini looks absolutely fantastic on it as well. It's perfect!
    The DisplayConfigX application is easy to use. You have to purchase a serial number to use the advance DisplayConfigX features. It is required when configuring the resolution for the XS955. It costs $12 to register it and the serial number is emailed immediately.
    Setting it up can be a little awkward. You have to install a VNC server on the mini and use another pc or mac to remotely connect to it. The VNC is very simple to use and so is connecting to it. Then you configure the resolution, install it, and then set it. That's really all.
    Yes. I had to reboot a couple of times to get it up and running. Once your done, that's it.
    If you need any help, you can email me @ [email protected] or vist the http://tenant.com/mini.php. If it wasn't for Michael and Jim from that website, this would not be working.
    FYI... I did test the mini on a top of the line Samsung and it looked incredible. But I chose the Sony because I watch more TV than I do surfing the internet. It was more important to me to have a better television image than a computer image.
    Good luck!
    David

  • DASHBOARD DATA DISPLAY PROBLEM ?

    Dear Expert,
    I have created Webi report based on Bex Query.
    Project  [Cal. year / month]   Sales
    A             05.2014               100
    A             06.2014               140
    A             07.2014               200
    B             08.2014               300
    B             09.2014               400
    C             10.2014               500
    C              11.2014               600
    Wen i Create dashboard based on above table, Cloumn chart and filtered by project then its not showing full [Cal. year / month].
    If Suppose I selected Project A then clolumn chart X - Axis shows only 05, 06 and 07 2014 data and on Y - Axis Sales.
    But I want all the month [Cal. year / month] if no data the its should be zero.
    Please help me expert.
    Regards,
    Divyesh Patel
    (9930578182)

    CALL TRANSACTION TCODE USING BDCDATA[]
                             MODE   S_MODE-LOW
                             UPDATE 'A'
                             MESSAGES INTO MESSTAB1[].
       REFRESH BDCDATA.
       IF SY-SUBRC = 0.
         LOOP AT MESSTAB1.
           MESSAGE ID     MESSTAB1-MSGID
                   TYPE   MESSTAB1-MSGTYP
                   NUMBER MESSTAB1-MSGNR
                   INTO L_MSTRING
                   WITH MESSTAB1-MSGV1
                        MESSTAB1-MSGV2
                        MESSTAB1-MSGV3
                        MESSTAB1-MSGV4.
          ENDLOOP.
         SKIP.
         LOOP AT MESSTAB1 .
           IF MESSTAB1-MSGNR = '060'..
             NUMBER = MESSTAB1-MSGV1.
             SELECT MBLNR MATNR WERKS LGORT CHARG MENGE FROM MSEG INTO TABLE IT_TEMP
                                         WHERE MBLNR EQ NUMBER AND BWART = '311'  AND LGORT  = 'NE01'.
             IF SY-SUBRC = 0.
                 It_TEMP1[] = It_TEMP[].
              ENDIF.
           ENDIF.
         ENDLOOP.
    ENDIF..
    PERFORM display_data.

Maybe you are looking for