Category Boxes on iTouch

How do I get rid of the small little category boxes that all my apps are assigned to every time I sync my iTouch? I pull them all out and rearrange them and when I sync everything is rearranged.

Do you have any Restrictions set that prevent installing apps? Settings>General>Restrictions
Is iTunes on the computer signed into the account that purchased the apps and is the computer authorized for that account?

Similar Messages

  • Regarding creation of new Alert category

    Hi All
      When I am creating a new alert category using Tcode ALRTCATDEF and trying to save it .A prompt-message is displayed as “prompt for customizing request “  what should i do to create the new Alert category . and see it in the select Alert category box
    Regards,
    Aziz

    Hi Aneez,
    I have given u all the configuration steps with links also the different ways by which u can raise alert.
    I think u have not gone through my threads. Also u did not replied me whether u resolved the problem which is raised in thread.
    1) how can i send an email alert through RWB?
    RWB is used for raising Integration and Adapter engine related errors.
    Its depends upto u what kind of errors u want to send.
    2)what are the steps i need to configure using Tcode ALRTCATDEF.
    Already provided u in one of ur thread.
    3) is this possible using CCMS Alerts .
    U can use this is another way of raising errros.
    4)do i need SMTP to be configured to send an Email Alert ?
    GO to SU01 transaction and maintained email address where u need to send alert message. IN ALRTCATDEF u need to mentioned the use in the fixed receiver tab.
    Hope it clears to you.
    Thnx,
    Chirag

  • How do i point to the Unix category?

    All I can do is point to OS X Technologies forum/discussion/community or whatever these are called, but can't direct anyone straight to the Unix or AppleScript category. This needs fixing or some direction on how to do this.

    baltwo wrote:
    All I can do is point to OS X Technologies forum/discussion/community or whatever these are called, but can't direct anyone straight to the Unix or AppleScript category. This needs fixing or some direction on how to do this.
    Hi baltwo-  this is like the blind leading the blind. You have to click on the category box:
    and you end up with this:
    https://discussions.apple.com/community/mac_os/mac_os_x_technologies?view=all#/? tagSet=1048

  • Report generation: server execution failed

    the app has been running for months. IS dept just upgraded machines and software. NT4.0 is now Win2000 and Office 97 is now Office2000. Report generation tool kit is not happy. Even running NI examples I get error -2146959355 server execution failed in Font Style.vi
    Lawrence M. David Jr.
    Certified LabVIEW Architect
    cell: 516.819.9711
    http://www.aleconsultants.com
    [email protected]

    Searching the Microsoft's web site, I found some info on this error:
    If you have never had Norton AntiVirus installed on your computer, follow the following instructions:
    1. Open up the specific VI causing Error �2146959355
    2. Recompile this VI by pressing the Run arrow while holding down the CTRL and SHIFT keys
    3. Go to File � Save All
    4. Run the VI
    If you are using Norton AntiVirus 2000 with Microsoft Word 2000, follow these instructions:
    Note: This information was provided by http://support.microsoft.com. Please use these instructions at your own risk.
    1. Select Start � Run
    2. If Norton AntiVirus is installed as a stand alone application, type:
    regsvr32 -u "c:\program files\norton antivirus\officeav.dll"
    If this is successful, you will receive:
    DllUnregisterServer in C:\Program Files\Norton AntiVirus\OfficeAV.dll succeeded.
    If Norton AntiVirus is installed as a component of SystemWorks, type:
    regsvr32 -u "c:\program files\norton systemworks\norton antivirus\officeav.dll"
    If this is successful, you will receive:
    DllUnregisterServer in C:\Program Files\Norton Systemworks\Norton AntiVirus\OfficeAV.dll succeeded.
    3. Click OK
    Microsoft notes that in some cases you must rename the oleaut32.dll and reinstall Office 2000. Renaming oleaut32.dll usually requires that you boot your computer in MS-DOS mode.
    - Navigate to the directory where oleutt32.dll is located (usually C:\windows\system32) using the cd DOS command.
    - Type: rename oleaut32.dll renamed_oleaut32.dll and press Enter
    - Reinstall Microsoft Office
    Note: This problem seems to still exist with Office 2002.
    1. Unfortunately, this is how the activeX works. If Microsoft changes the activeX objects from one Office version to another, the executable built with Office97 will not work with Office2000. You will have to recompile your VI into the executable on a machine with Office2000 and toolkit configured for this version.
    2. For the error "server execution failed" with Text Report Example, select File � VI Properties. Select "Execution" from the category box and set the "Preferred Execution" to user interface. This should solve the problem.
    Zvezdana S."

  • Problem with GL accounts

    Hi Gurus
    when i was editing and saving Parked Documen it was giving two errors, one is GL 300568 has been set as not relevent for tax
    for one documents
    and for another doucemtns account 6698597has been set as not relevent for tax
    any idea
    regards
    Sunitha

    Hi,
    follow the below :
    FS00 ->Control Tab ->Un tick the Tax Category box -> save and try again.
    Srinivasa Chary

  • ActiveX Invoke Node returns -2146959355

    I ran the attached VI on LV 5.1.1 w/ no problems. Its purpose is to change the configuration of an HP16522A Pattern Generator accessed by LAN (hplogic1 is the mainframe's IP). I've also installed LV 6i at the same time, but whereas LV 5.1.1. still works fine, LV 6i fails - but only on the 'LoadFile' Invoke Node. Also, if I connect 'StatusMsg' Property Element to an indicator, LV 6i shuts down abnormally with a MS/C++ error.
    I've tried loading the LV 5.1.1 VI on LV6 but the result is the same.
    My OS is Win2000 5.00.2195/Service Pack 2.
    Attachments:
    hp16522_-_load_ascii_file.lv6.vi ‏45 KB

    One thing that you may try to solve this ActiveX error is to, in LabVIEW 6, select File>>VI Properties. Select Execution from the category box and set the Preferred Execution to user interface. This should solve the problem.
    Also, National Instruments has a LabVIEW driver for HP16522A, but it is somewhat different for LabVIEW 5.1 and 6i. The VIs, and the ActiveX objects they use may be different for these two versions. You may consider downloading the driver for LabVIEW 6i from:
    http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/16f803b84cc3b502862568ab005fb9ea?OpenDocument
    Zvezdana S.
    National Instruments

  • EDT Cat. 15 Data loaded to SAP but failed when updating

    Hi,
    I have an structure to load data into BP using KCLJ with Cat 15.
    Here it is.
    AKTYP
    TYPE
    PARTNER
    ROLE1
    KUNNR
    KUNNR_EXT
    BU_GROUP
    FIBUKRS
    CHIND_ADDR
    NAME_CO
    NAME_ORG1
    NAME_ORG2
    STREET
    STR_SUPPL1
    STR_SUPPL2
    STR_SUPPL3
    LOCATION
    HOUSE_NUM1
    POST_CODE1
    CITY1
    COUNTRY
    REGION
    LANGU
    CHIND_TEL
    TEL_NUMBER
    TEL_EXTENS
    We had the data loaded to SAP with ROLE 000000 and TR0100 but somehow when we tried to update the address thru ROLE TR0100, we had a dump and failed to update. However, the update is good when we use ROLE 000000 to update.
    Anyone would have a clue of this?
    Thanks

    I am new to EDT also. I know Cat 15 which can load BP. SAP has more categories which can load more using KCLJ. Here's my experience.
    Under Tcode SIMGH, find IMG structure External Data Transfer for SAP Banking. Under that structure, you can find Display Required and Optional Entry Fields for SEM Banking. When you enter 15 in the Category box, you'll see a whole list of fields about BP. You can use these fields to create your own structure.
    After you created your structure, use Define Sender Structure under External Data Transfer for SAP Banking to define your structure. After that, it is done. You can try use KCLJ to load your BP.
    If you still have other issues, mostly will be the configuration.
    Enjoy.

  • HT4907 iCloud server not responding

    I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
    Can somebody help me what to do?

    I was having the same problem but found a solution that worked for me.
    1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
    2. Open the Keychain Access app (in Applications/Utilities).
    3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
    4. Make sure "All Items" is selected in the "Category" box below.
    5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
    6. Delete the key(s), authenticating with your password to do so.
    7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
    At this point, Back to My Mac started and the "server not responding" message did not appear.
    I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
    Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

  • I get an error message for publication type

    I am using itunes producer to load a book.  An error message for "publication type" appears when I get to deliver content area.  I am unable to fill in that category box when I go back to that particular screen.  The drop down box there shows a check mark that will disappears immediately when clicked on.  I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message.  I did enter a price in the pricing box.
    Thanks for any assistance,
    Don

    I'm having the same problem.  Have you found the answer?

  • Need help, seriously! UNSUBSCRIBE?

    not specifically for this forum, but somehow I accidently
    "subscribed" to email notification ([email protected]) and I am
    getting BOMBARDED with emails... One is sent whenever someone
    posts. I do not want these emails. How so I turn this off?

    no go... i think something is messed up
    i am a little confused by the three Category boxes... when
    you SUBSCRIBE to a category, do you also need to BLOCK all of the
    others??? I assumed that if the SUBSCRIBE box was empty, I would
    get no emails. It does not seem to work that way. I got/am getting
    emails on many different topics!

  • How to create a New Event Window Pop up

    The program I want to develop has many layers.  I want to have a menu page, after clicking on one of the buttons, I would like to see data display on the new event pop-up.  I have checked the example : New Event Handler.vi however, it does not work when I put my own subvi into the Event Structure.  Can you tell me what is the property of the subvi that I need to set in order to have it as a pop-up window? 
    Thanks. 
    Ellynn

    Go to the File Menu - VI Properties.  Select Window Appearance in the Category box.  Then click on the Custom radio button and then click the Customize button.  Click on the Show front panel when called checkbox and the Close afterwards if originally closed checkbox.  Click OK.  Now when you call your subvi, it will be displayed and will close when the vi is done.
    - tbob
    Inventor of the WORM Global

  • How can I stop FireFox from running at startup?

    Need to stop FireFox from running at startup. It is slowing down my computer startup.

    works the same on both oses or you can use Start Menu > windows defender > Options > Startup Programs ,
    This helped!
    Went to startup -then to all programs.
    Clicked on windows defender, next click on tools.
    click (ck) on software Explorer. next go to the category box and select startup.
    All the programs at startup will be listed with either permitted or disabled!

  • ICloud server to responding

    I keep getting the mthis message when trying to go back to my mac.  Has anyone else had this and how did it get resolved?
    Thanks

    I posted in a couple other threads about this issue. Hope this helps.
    I was having the same problem but found a solution that worked for me.
    1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
    2. Open the Keychain Access app (in Applications/Utilities).
    3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
    4. Make sure "All Items" is selected in the "Category" box below.
    5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
    6. Delete the key(s), authenticating with your password to do so.
    7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
    At this point, Back to My Mac started and the "server not responding" message did not appear.
    I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
    Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

  • Specific questions about a RAM upgrade to 4GB on my MBP

    I have a MBP model MA895LL/A. Currently populated with the original memory (2GB)
    Recent clean install of Snow Leopard, with all current updates.
    Specific questions:
    What memory does Apple use in their laptops? Does it really matter if you get the same manufacturer for complete compatibility?
    Do timings matter? Will faster timing improve performance slightly, or is it a waste of money to go for the faster stuff on my specific model (Intel Core 2 Duo T7500)
    Best to populate with 2 sticks X 2?
    Finally, how about manufacturers? Anyone have any positive experiences with specific manufacturers, or, horror stories they can share?
    I guess I just want to buy the best memory for my MBP. I build my own PCs, but I'm not sure if the Mac is a little more picky, RAM wise. Cost isn't really a factor. I'm willing to spend a little more, and buy the right stuff, and only do it once, without the hassle of sending it back, etc.
    Any advice would be great. I know its possible this question has been answered many times before. I guess I don't know where to look...

    Uh, yes, this is asked just about every day, like here:
    http://discussions.apple.com/thread.jspa?threadID=2154109&tstart=0
    Using the "Search Category" box in the upper right works.
    To answer your questions, since you likely have the 2 slots filled with 1GB DIMMs, you need to get a pair of 2GB to max the RAM. I guess you could use 1 OEM stick and one 2GB stick for 3GB total, but I would just go for 4GB. If you are under warranty, save the original RAM, as Apple seems to dislike seeing any 3rd party RAM no matter what. Put the OEM RAM back in if you need warranty work.
    I've seen several brands OEM, a lot of Hynix and Samsung, but it is probably all well tested to Apple spec. Otherwise, brands mean nothing, but see the above linked thread. I prefer to go with the exact spec'd RAM myself. I believe "faster" RAM does not run any faster. Vendors mentioned in the linked thread all have selector aids to find the exact RAM for your model.

  • How can I create a Wall Street looking wrap effect?

    I want to create a line of text and then have it wrap around on my screen. As soon as the last letter is viewable I want it to loop. I'm looking to get the effect of the text that scoots along the bottom of the screen on Wall Street.
    Thanks!

    30 minutes is too much render time in LiveType.
    I would suggest typing the text you want and then put a space at the end of your line(s)
    Then copy the that line(s) including the space and paste it dozens of times.
    With the text track selected click the Timing Tab in the Inspector and change the duration to 60 seconds
    Then Go to the Effects Tab in the Media Browser, and in the Category box select the "Scrolls and Crawls", highlight the "Crawl Left" and click Apply
    With the Effects track highlighted, select the Timing Tab in the Inspector and increase the loops to 12
    Set your end point for 60 seconds
    Save it or render it as a movie then bring the file into FCP, place it on a video track, copy and paste it 30 times
    Voila a 30 minute lower 3rd crawl.

Maybe you are looking for