'Category' feature 'Subtotal' decimals will not adjust

Hi,
I am using the 'subtotal' option within the category feature. I cannot find a way to reduce or eliminate the decimals as they appear in the (white) table cells. I have tried the 'Numbers' users guide without much luck.
Your help will be much appreciated.
Thank you in advance.
Tarik

Hi Robert,
Don't just 'hope,' Provide Numbers Feedback to Apple, where this type of change can be made. Here you're just venting to users like yourself who are not able to rewrite the application. You'll find the Provide Numbers Feedback item in the Numbers menu in Numbers.
Meantime, if you had Numbers '09 on your Mac before downloading and installing Numbers 3, and you haven't actually deleted the older version, you will still find it in your Applications Folder (possibly also enclosed in an iWork '09 folder), and you will find that it still works. Use it until Numbers 3 has the features you need.
Regards,
Barry

Similar Messages

EMF Feature Model - Feature Diagram Editor will not install on Mars

Hi,
Please can you help or let me know what I am doing wrong.
Does anyone know if the EMF Feature Model Diagram Editor runs on Mars?
If not, which release?
I'm trying to install the EMF Feature Model Diagram Editor on the Mars release.
1. Installed mars modelling package 64bits on Windows 7 (64bit)
from : https://www.eclipse.org/downloads/packages/eclipse-modeling-tools/marsr
Run Eclipse:
2. help->install new software:
- from https://wiki.eclipse.org/EMF_Feature_Model/Feature_Diagram_Editor:
- add:
Name: emf feature model
Location: https://wiki.eclipse.org/EMF_Feature_Model#Installation
Pending..., then:
EMF Feature Model:
- EMF Feature Model Meta Model 0.8.0
- EMF Feature Model Evaluation 0.8.0
- EMF Feature Diagram Editor 0.8.0
Select all
Next
Wait a while... then this is displayed:
Feature Diagram Editor will not be installed.
Click on Show Original Error:
Details:
Cannot complete the install because one or more required items could not be found.
Software being installed: Feature Diagram Editor 0.8.0 (org.eclipse.featuremodel.diagrameditor.feature.feature.group 0.8.0)
Missing requirement: Feature Diagram Editor 0.8.0 (org.eclipse.featuremodel.diagrameditor 0.8.0) requires 'bundle org.eclipse.emf.ecoretools.diagram 1.0.0' but it could not be found
Cannot satisfy dependency:
From: Feature Diagram Editor 0.8.0 (org.eclipse.featuremodel.diagrameditor.feature.feature.group 0.8.0)
To: org.eclipse.featuremodel.diagrameditor [0.8.0]
Cancel
3. Did some google searching. Looks like this is part of ecoretools?
Then Help-> Install Modelling Components
Pick EcoreTools (updates)
A Ecore Diagram Editor, version 3.0.0.201507011611 is listed.
That is installed, successfully and Eclipse restarts.
Repeat Step 2 above.
Same Error.

David,
From what you write, it looks like it depends on a quite old version of
Ecore Tools (and so it's not a very active project producing update site
based on recent versions of other projects). It looks like you can fine
the old version of Ecore tools from this page:
https://www.eclipse.org/ecoretools/download.html
You'd need to add that to your "Available update sites" preferences.
On 19/07/2015 10:57 PM, David Roberts wrote:
> Hi,
>
> Please can you help or let me know what I am doing wrong.
> Does anyone know if the EMF Feature Model Diagram Editor runs on Mars?
> If not, which release?
> I'm trying to install the EMF Feature Model Diagram Editor on the Mars
> release.
>
> 1. Installed mars modelling package 64bits on Windows 7 (64bit)
> from :
> https://www.eclipse.org/downloads/packages/eclipse-modeling-tools/marsr
>
> Run Eclipse:
>
> 2. help->install new software:
> - from
> https://wiki.eclipse.org/EMF_Feature_Model/Feature_Diagram_Editor:
> - add:
>
> Name: emf feature model
> Location: https://wiki.eclipse.org/EMF_Feature_Model#Installation
> Pending..., then:
>
> EMF Feature Model:
>
> - EMF Feature Model Meta Model 0.8.0
> - EMF Feature Model Evaluation 0.8.0
> - EMF Feature Diagram Editor 0.8.0
>
> Select all
> Next
>
> Wait a while... then this is displayed:
>
> Feature Diagram Editor will not be installed.
> Click on Show Original Error:
>
> Details:
> Cannot complete the install because one or more required items could
> not be found.
> Software being installed: Feature Diagram Editor 0.8.0
> (org.eclipse.featuremodel.diagrameditor.feature.feature.group 0.8.0)
> Missing requirement: Feature Diagram Editor 0.8.0
> (org.eclipse.featuremodel.diagrameditor 0.8.0) requires 'bundle
> org.eclipse.emf.ecoretools.diagram 1.0.0' but it could not be found
> Cannot satisfy dependency:
> From: Feature Diagram Editor 0.8.0
> (org.eclipse.featuremodel.diagrameditor.feature.feature.group 0.8.0)
> To: org.eclipse.featuremodel.diagrameditor [0.8.0]
>
> Cancel
> 3. Did some google searching. Looks like this is part of ecoretools?
>
> Then Help-> Install Modelling Components
> Pick EcoreTools (updates)
> A Ecore Diagram Editor, version 3.0.0.201507011611 is listed.
>
> That is installed, successfully and Eclipse restarts.
>
> Repeat Step 2 above.
> Same Error.
>

My iPhone 4s will not adjust the potrait orientation

Hi,
My phone will not adjust the potrait orientation. It currently will just stay on vertical(potrait) and not move to horizontal(landscape). I also have the latest iphone update 7.0.3. Does anyone know if this is a bug or not? Or if there is an issue with my settings.
Thank You

nevermind already figured it out. If you go to you control center by swiping up on the home screen at the top right button you can lock/unlock the potrait orientation.

Imovie 11 will not adjust volume of music track

So I put together a skit with background music and laugh tracks. I shared a copy with a friend and he told me when he played it the volume of the background music and laugh track were too high. I went back in and tried to adjust and even though I turned everything down (even to 0%) they still play at the same volume. I have now removed all but the video clips. I removed any ducking and reverted back to the original settings.
Can anyone give me advice on how to make the adjustments?

I think I found my answer.. I searched the internet looking for information on this issue.. and apparently, you are not supposed to drag music to the timeline. You only drag it to the background... an unexpected software change that renders all of the previous work on my movies invalid. I am going to have to go back into all of them and re-do my music.
Sound effects (.CAF files) work on the timeline.
Now.. I have another issue....
My stills in the movie are locking it up...
I have found clues that I have not yet investigated. It appears that you have to use iPhoto to organize your stills before you import them. We shall see if this works.
As for versions...
Identifier: com.apple.iTunes
Version: 10.1 (10.1)
Model Name: MacBook
Model Identifier: MacBook4,1
Memory: 2 GB
Bus Speed: 800 MHz
And I have tried various music formats .mp3, .m4a, .acc and .m4p..
Few of these songs are iTunes purchases. Many are direct imports from my CD collection.. Some are downloads from other sources...
None of them will play when pasted to the timeline.

Video Scopes will not adjust

I did a search so if you have a link to answer this I'd love it. During capture, I want to use the FCP Video Scopes. I can get the waveform monitor and vectorscope to pop up and they show the info but I cannot adjust them. In clip settings, video, the adjustment sliders are not active, they are grey. Help?

I can get the waveform monitor and vectorscope to pop up and they show the info but I cannot adjust them. In clip settings, video, the adjustment sliders are not active, they are grey. Help? < </div>
The availability of these adjustment sliders is clearly explained in the manual. They are not active on digital transfers because DV files are merely being copied from one place to another, they are not processed.
Reading down the thread to where you finally get around to supplying the information we need to help you, your BetaSP has a built-in time base corrector that should have a remote panel on it for controlling the proc amp functions. If it does not, you got ripped off. If you do not know how to operate the proc amp, you will need the Sony's manual.
Unless your BetaSP is really a digiBeta, you will need conventional waveform and vector displays between the deck's analog output and your capture system to accurately portray the effects of any adjustments you make to phase, pedestal, luma, and chroma.
bogiesan

MacBook display brightness will not adjust

My MacBook display brightness is very low level, the F1 and F2 brightness keys bring up the transparent window and show brightness turned all the way down, but F2 does not increase the brightness. In Preferences, the display section shows the Brightness slider all the way to the top, and if I attempt to slide that down it snaps back to the top, and the actual screen brightness does not change from very low. I also have verified that the function keys are NOT set to lock out the brightness function, so pressing command and F1/F2 does nothing. So nothing from previous forums seems to apply! All other function keys operate properly (multi-window, volume, dashboard).

OK guys, think I found a solution to this one.
My girlfriend's mac had the same problem as yours, and I was motivated to fix it becuase I needed to use my mac for my dissertation and she kept stealing it!
anyway, turn the brightness all the way down, press it up once and you will see the screen flash. do it again, really fast up and down up and down and the scree will stay on as long as you keep playing with the buttons.
next, use this temporary fix to get into system preferences -> displays... and change the resolution to something considerably lower. then it stays on permanently. Not too sure about why this happens, maybe the mac can no longer handle that many colours or complexities?
sod it. enjoy.

Audio clip will not adjust ???

I can not make my audio clip move to the location I want....every time I move it the clip immediately returns to the beginning of my project. I want to start with some dialogue and then have music begin about 30sec. into the project but no luck.
This seems to contradict what the help/instructions say Imovie can do.
Any suggestions? What am I doing wrong?
Thanks
CT

You can move voice overs and sound FX, but not music.
iMovie iOS is really just a basic editor.
Try a more featured editing program if you want to do more then just small quick edits.

Fan Speed will not adjust/Too Noisy

I just installed my new MSI R6670 card. This card was reviewed as being very quiet but I immediately thought just the opposite. It sounds like the fans are running at 100% all the time overwhelming the sound of all other fans in my system.
The CD came with AMD's 8.84 driver so instead I went ahead and downloaded the latest 11.6 and included catalyst control center. CCC acted like it was adjusting the fan speed but there was no change in sound - like the fans were still running at full speed even though it said they were not. So I uninstalled CCC but left the 11.6 driver in place and installed MSI's Afterburner software. In the left hand pane it claimed the speed was set to Auto and currently at 44%. But in the hardware monitor section it lists the speed as 0% with occasional blips but mostly staying at zero. Turning off auto control and dragging the fan speed slider all the way to the slow side and clicking "apply" seems to have no impact on the sound and the hardware monitor keeps reading zero. Its showing the temperature at a steady 39 which doesn't seem excessive. Its looking to me like the software may not be able to monitor the fan speed so its just staying at 100% all the time.
Please help! I bought this card because the Radeon 6670 was supposed to be the most powerful card that would run without its own PCIe power cable and also because the reviews said it was very quiet. Right now it is anything but quiet!

I just pulled the card and disconnected the wire. They are definitely 4 wire fans. FYI Afterburner is crap as far as telling you what the fan speed is. When I put the card back in I left the wire disconnected and briefly started the system with the card running fanless. Afterburner still showed the fan speed as whatever the it was SUPPOSED to be running and showed the speed increasing with temperature, even though the actual fan speed was zero. So their software isn't even actually monitoring the speed. It is just telling you what the fan speed should be not what it is. Going through the threads on this forum, I'm seeing several others with different models of MSI cards having this same problem.

After updating my iPhone 5 to the ios 7, my imessage feature and facetime will not work.

After updating my iPhone 5 to the ios 7, imessage nor facetime will work. Anyone else with this problem?

First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
If that does not work, Restore your iPhone in iTunes from your backup.
If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

I have HP Pavilion Entertainment PC, OS Windows 7. My volume scroll zone will not adjust the volume.

Any solutions?

What model is your HP Pavilion Entertainment PC. You can find the product number on the tag where your serial number is. This will be very helpful in troubleshooting your issue.
Although I am an HP employee, I am speaking for myself and not for HP. Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Timeline Window will not adjust, fills ENTIRE screen, help please?

All of a sudden my timeline window FILLS my screen and I cannot get to the bottom of the timeline to adjust the size. It has tons of extra grey space on top of the video tracks, and tons of extra space below the audio tracks. It makes editing difficult as I cannot move along the timeline or anything. I wish I could attach a screenshot. Basically just imagine the timeline window extending the ENTIRE size of the screen, with no way to make it smaller. Help!

Trash your preferences
http://www.fcpbook.com/Misc1.html

My iPhone display will not adjust to landscape

Can't get my phone to adjust to landscape

Is it possible you've locked it into portrait mode? If so, icon in topbar, instructions here:
http://www.tech-recipes.com/rx/6125/iphone-ios4-lock-orientation-but-where-is-th e-horizontal-lock/

Firefox window will not adjust in size, the window is either Maximized or no window displays.

Environment is Windows XP Professional.
Opened Firefox (3.6.8) and an icon displays on the task-bar, but no window.
Rt click on icon and options are "Maximize" or "Restore". Clicking on either produces a full locked window. Cannot re-size or drag by top bar.
Clicking on the "Maximize" icon in the upper right corner of the window and the window disappears. Window may be reopened by a Rt click on the task-bar icon and selecting "Maximize" or "Restore"
Opened another session of Firefox at the same time, and a small window (as small as it can be) appears in lower left corner. Can be re-sized, "maximized" and "un-maximized" and appears to be normal.

Need to add that PC was rebooted multiple times, and error occurred each time Firefox was started up, after the reboot.

With the new iOS 7 update when I go to set a pic as my wallpaper it will not adjust the size like before so it fits to the screen. How can I get it too

With the new update when I got to set a photo it won't let the pic to shrink to fit to the screen even though I try it just stays big. How can I get it to shrink down

See this Apple Best Practices Guide, about half way down the page:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
It gives the recommend procedure.
MtD

On iPhone 5 key board will not adjust when turned horizontally

On my iPhone 5, when the keyboard is turned horizontal it stays in the vertical mods. Is there a fix?

With every app that uses a keyboard?

'Category' feature 'Subtotal' decimals will not adjust

Similar Messages

Maybe you are looking for