Category labels fail to update in column and bar charts

I originally posted this comment in another thread (Re: Category labels fail to update). I thought I should repost it, as the issue still exists after installing SP1 Fix Pack 2 (version 5.1.2.0), and it wasn't clear from the previous thread that the problem had been logged.
If you have a bar chart or stacked bar chart, the category labels do not update with the underlying data when you have the "Horizonal (Value) Axis Labels" box unchecked. Same effect with a column chart if the "Vertical (Value) Axis Labels" box is unchecked.
I'm getting around the problem in the meantime by keeping the box checked but changing the font size to zero, which reduces the labels to small dashes, and then using a font colour that matches the background as much as possible.
... by the way, another issue I see in this same area is that although there are separate checkboxes in charts for choosing whether to display titles and subtitles, it is not possible to select just titles - both checkboxes appear to be locked together.
- Peter

Hi Tammy,
I didn't regard #2 as bug - in fact I thought it was helpful to be able to set the size to zero as a workaround to the problem outlined in #1.
Regarding #3, if this is by design, then I'd suggest that it's a poor design choice to have checkboxes next to both titles and subtitles, since this implies that they should be able to be separately controlled.
Something else I've noticed with this formatting area is that the position and offset controls are disabled, and there doesn't appear to be any way to use them. It would be very helpful to be able to use these to move the position of chart titles. In a dashboard I'm currently building, we have a large stack of charts sized very small, to attempt to resemble the 'sparkline' concept. But the chart titles are so high, it's not clear which chart they refer to (they look like they might refer to the chart above it). As a result, I've had to remove the chart titles and place independent labels over top of each chart to be able to position them closer to the chart's display area.
Peter

Similar Messages

Category labels fail to update

Hi,
I have two charts which which are updated via a web service they are set to update using a cell value trigger, a combo box is attached to the cell and when the value changes the data is refreshed, both charts update but the category labels on the second chart fails to update although the bar chart is refreshed and the legends show the new values that should be seen in the category labels. Why are the new values not reflected in the labels? If I point a single value control at the same data the value is updated!
Regards,
joe

I'm observing a similar issue (version 5.1.1.0, build 12.1.1.344).
If you have a bar chart or stacked bar chart, the category labels do not update with the underlying data when you have the "Horizonal (Value) Axis Labels" box unchecked. Same effect with a column chart if the "Vertical (Value) Axis Labels" box is unchecked.
I'm getting around the problem in the meantime by keeping the box checked but changing the font size to zero, which reduces the labels to small dashes.

Failed to update Photoshop CC and After Effects CC

Failed to update Photoshop CC and After Effects CC what to do?

Your first response was not visible Macrosdevelop. I would recommend you choose the option to View the Full Discussion and respond within the browser. What error message do you receive specifically? What update are you trying to apply?

Line chart and Bar chart

I have been assigned task to build the line chart and bar chart in Java. Is there any Java package that supports to draw such charts?

btw Sabre, are you still retired, being lazy and
playing Bridge a bit? Yes Jos, I'm still retired. Nothing yet to temp me out if retirement and I play Bridge as often as possible.
If so,
good you lucky old bastard. Or are you longing for
those silly project
managers who want all the stuff finished by
yesterday? ;-)I always ignored them anyway!
>
kind regards,
Jos
ps "when I say 'yes' that doesn't imply I
understood the question"
-------a project managerI only ever met one good project manager - my bank manager! He gave me all the encouragement I needed to get a project finished on time.
Sabre

Seek 2D Line and Bar Chart Graphs HOWTO

Can anyone share with me on where I could obtain/teach
me how to write 2D Line and Bar Chart Graphs ?
I like the class/program to be called from java code and not
from command prompt to plot points or bar graphs.
Please, no vendor recommendations.
I dont have the $ to purchase.
Any help is appreciated.
Thanks

I checked the web site of JFreeChart and its document
says to get premium service, it requires $.
I dont really have the $ to purchase that software.
It's a vendor product!Just to clarify, JFreeChart is free software, it is licensed under the GNU LGPL. You get the complete source code, including lots of demos, Javadoc HTML pages, an install document in PDF format, and access to the support forum for absolutely no charge. You don't have to pay a fee to unlock special features in the software, everything is there in the free download.
As a way of funding the project, we sell a JFreeChart Developer Guide which includes a lot more information about using JFreeChart. But it is only the documentation we sell, not the software.
Hope that helps,
Dave Gilbert
JFreeChart Project Leader
http://www.object-refinery.com/jfreechart/index.html

Trans. Replication failing -- "Cannot update identity column ..." -- unable to use sp_browsereplcmds to view statement

All, I'm trying fix an issue with transactional replication where replication monitor is showing the push to the subscriber is failing because of the error, "Cannot update identity column." I've tried to use sp_browsereplcmds to pull up the
command that's failing based on the xact_seqno but when I try that I get the error:
Number: 102, State: 1, Procedure: , LineNumber: 0, Server: , Source: .Net SqlClient Data Provider
Message: Incorrect syntax near '┻'.
I'd like to fix the issue without having to rebuild replication during a maintenance window. I know you cannot publish tables with primary keys, but I'm wondering if dropping the identity column on this table might fix the issue. I'm considering
that but I would prefer to be able to pull the command that's trying to update the identity column, throw in SET IDENTITY_INSERT ON and remove the commands from the distribution database, but if that doesn't work I'm open to ideas of just dropping the primary
key on the replicated table. I think that should be fine.
Does anyone have any recommendations on how to view the command that's failing?
Or if dropping the primary key on the subscriber table would create issues with the publisher (since it is also the primary key)?
Or, know of any other ways in which to address this issue? Thanks.

Unfortunately, no. The error was a bit of a red herring. In the end the subscriber was missing all of the stored procedures needed to update data in the published tables (i.e., the procedures for performing inserts/updates/deletes were missing
for every table in the subscriber database). Additionally, I could not recreate these stored procedures using sp_scriptpublicationcustomprocs
because another procedure which was required for that proc to work was also missing. In short, there were hundreds of missing stored procedures in the subscriber database on which transactional replication is dependent in order to replicate DML changes and
function normally and this includes system sprocs which would've been used to recreate the missing DML procs. In short, the subscriber was badly damaged and deemed to be unrecoverable within a reasonable time frame.
The solution was to tear down and start over, which we did successfully later in the evening.

Who updated the column and when

I have a question we have a column and we want to find out who updated it and when means what was its initial value and what changes have occured to it and who made these changes
Thanks in advance
Shakeel
Pakistan

> oracle does not (by default) keeps any track of updates/deletes etc.
And it is not possible to recover this information.
Oracle does keep track of updates/inserts/deletes - that is the cornerstone of any RDBMS as it is required for concurrency controls, dealing with locks and transactions.
This data is stored in the undo/redo area of Oracle. In archive log mode, this data is automatically archived before it is deleted when it is no longer needed.
There is thus an accurate record of transactions in Oracle. Oracle provides a standard product called Log Miner that allows you to reconstruct what has happened.
However, as far as identifying the user, that is not possible. Oracle does not know or care who the user is - or who/what/where the client application is. It does not authenticate the end-user or client application. All that the end-user/client application need to supply is a valid Oracle schema name and password (default Oracle authentication). And that is what Oracle records for the transaction - the Oracle owner of the Oracle session for that transaction. Not the end-user, not the client application or even client IP address.
That data is related to auditing and not to the actual transaction. In which case you need to look at the Oracle AUDIT command for recording those details.

HT201364 Mac App Store fail to update new apps and install new apps

My current MacBook 13" 2011 Late is running Mavericks 10.9.4, and recently when I try to update /install apps from Mac App store errors comes up telling me it failed to update/install apps with unknown errors.
Tried following possible solutions after some search through forums and search engines, however, still with no luck of solving this issue, hope anyone with something that would make my Mac App store to work again.
1. Change DNS (8.8.8.8).
2. Reset Application & Clear Cookies in Debug mode.
3. Remove cache.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Xcelsius Drill Down With Column and Line Chart

Hi Guys,
I am working on an Xcelsius 2008 Dashboard. I would like to integrate two charts, a column and a line chart. The column chart is supposed to show the results for each quarter. With a selector it changes the view and name of the different numbers.
Then I would like to enable the drill down so that I can see the results for the three months of the corresponding quarter in the line chart. Is that somehow possible? I am totally lost. Thanks for your help.
Kind Regards,
Maurice

Hi Maurice,
You cannot integrate a column chart and line chart to make drill down possible. You could drill down a column chart to show the values in another chart bt that would be just two different charts and not an integrated one.
Regrads,
Anju Saseendran

Mapping between Icon component and Bar chart component

Hi experts,
I have added one world map, on which i have added 3 icon component in different area of world. At present i have added 3 different bar chart for each icon component. Now i want to take only one bar chart which sohws data according my selection of icon component.
can anyone help on this, plz?
Thanks in Advance,
Rishit

Hi
Try the following:
Icon1 Source data = Unchecked 0, Checked 1
Icon1 Destination Cell $D$2
Icon2 Source data = Unchecked 0, Checked 2
Icon2 Destination Cell $D$3
Icon3 Source data = Unchecked 0, Checked 3
Icon3 Destination Cell $D$4
Have all the icons set to be unselected.
In cell $D$5 have the formula =max($D$2:$D$4). This cell now controls the Dynamic Visibility of the Bar Charts.
Barchart1, Dynamic Visibility Status = $D$5, Key = 1
Barchart2, Dynamic Visibility Status = $D$5, Key = 2
Barchart3, Dynamic Visibility Status = $D$5, Key = 3
I think that's what you are asking! Please keep in mind that you have to click the icons on and off to show/hide the charts.
Regards
Charles

HT202853 iMovie failing to update older projects and events on external hard drive.

I've made sure my iMovie events and iMovie projects files are on the top level of my external hard drive, however iMovie says, "iMovie could not find any events or project files to update" please help.
I only recently updated my computer to OSX 10.10.1 ; before that, I was using OSX 10.6.8 Snow Leopard. Not sure if that has any effect on this topic.
Here are my specs:
Type: MacBook Pro (13-inch, Early 2011)
Processor: 2.3 GHz Intel Core i5
Memory: 4GB 1333 MHz DDR3
Startup Disk: Macintosh HD
Pretty sure graphics and serial dont matter so I wont put it in.
But yea, I've been trying to figure out what's going on for a few days and have had no result.
This problem's really hindering my progress for a film I'm making and iMovie is getting more and more frustrating to use as it develops.
I hope somebody be able to help me asap.
Thanks

If you want to try and start over with the iMovie 10 "Update Projects and Events...", remove the "UpdatedToiMovie10" file in both the iMove Events and iMovie Projects folders (the older folders). Then open iMovie 10 and reselect "Update Projects and Events...". My expectation is that you will experience the same missing events problem I have, caused by changing the clip date and time in the previous version of iMovie (9). It's a bug that persists through iMovie 10.0.8 (just released a few days ago). Really really wish Apple could fix this.

Update Failed when updating Photoshop, Illustrator and Indesign

The Learn More isn't very helpful. I get a message saying its an error U44M1I216 after trying to update the 3 apps and it says to contact customer support.

Update Failure what specific error messages are you able to discover in the update installation logs? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

I am failing to update my iphone and its stack in recovery mode giving an error 1015,pliz help

my iphone is not recovering data and not updating software.its giving me un error 1015 please help

Hi ..
Related errors: 1015, “The required resource can't be found.”
You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
From here > Resolve iOS update and restore errors

Combining Column and Line charts

I'm trying to put together a composite graph, consisting of
both LineSeries and Column Series, for a financial page. I'm
rendering the entire graph inside of a ColumnChart. However, when
multiple points for the lineseries are close together, the
mouse-over only displays a single dataTip. When working in a
LineChart, multiple dataTips are displayed for any points close
together or on top of each other; is there any (preferably simple!)
way to replicate that functionality in a ColumnChart?
Thanks!

And to make it even more fun, I just know discovered that
interpolateValues="false" does not seem to function properly within
a columnChart. Does anyone know a workaround for this
problem?

Creating Graphs and Bar Charts

Hi members
I have been looking high and low to find my answer but to no avail.
I currently run SAP AR Age debt reports once I extract this data I create graphs in excel.
I am looking for Sap transaction where I can create a graphs and link them to T-Codes such as AGE DEBT report.
Please help

Hi,
first of all you can create z tcodes only in that is in se93.so create a report either using FM or oops and link it too the tcode.
other FMs
GRAPH_MATRIX                   Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D                Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D                Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D                Calling up a 3D graphic (4th dimension stacked representation).
u can follow
Graphs in ABAP
hope it helps..

Category labels fail to update in column and bar charts

Similar Messages

Maybe you are looking for