Catolog conversion error converting a PSE3 to PSE10

I recently purchased PSE 10 and have tried to convert the catalog from my PSE 3 and receive the following error: Catalog conversion failed. Try repairing the catalog with the software that created it and retry conversion. Please refer to the help article "Catalog Conversion Errors" for more details.
I went back into PSE 3 and performed a recover on the catalog and it completed successfully. When I went back into PSE 10 and retried the conversion, I received the same error.
I also searched for the "Catalog Conversion Errors" article but could not find it specifically although I found numerous discussions on conversion errors.
There is just so little information provided with the error. I appreciate any assistance anyone can provide.
Thanks,

I was having the same problem with converting PSE 9 catalogs with PSE 10 and followed the same advice without results. I discovered quite by chance that if you were lucky enough to save your last version's db file (in my case the catalog.pse9.db file), you can open this file with the Photoshop Elements 10.0.exe file and it will save it as catalog.pse10.db, complete with all tags and other unique catalog date. The catalog name will be the one associated with the catalog.pse9.db file. This was my last resort short of creating a new catalog and having to retag everything.

Similar Messages

Catalog conversion error from PSE 9 to PSE10

Each time I try to convert the PSE 9 catalog using PSE10 I get an unspecified error.
I had problems after initially loading the programs and probably didn't choose the correct option to convert the catalog when first prompted. (I loaded Photoshop Elements and Photoshop Premiere 10). I currently have PSE 9.
I tried uninstalling and reinstalling the programs. When I tried to convert the catalog, the program acted it was going to work, but then the conversion stopped part way through and gave me the error.
After a couple of tries more unsuccessful tries at converting the catalog, I logged out of the program. The next time I opened the PSE10 Organizer, it showed a message that said it was updating and seemed to get stuck in a loop. I stopped the program and restarted it with the same result. I ended up uninstalling and reinstalling the programs again so that I could get past this step.
Before I tried to convert again from PSE 10, I first tried to repair and optimize the catalog from PSE 9. That did not seem to help and I got the same unspecified error part way through the conversion.
Please advise.

Ken,
I wanted to thank you for your help and tell you how the problem got resolved.
I sat down last night to implement some of your suggestions below and the Adobe chat window popped up. I decided to give that a try.
My previous attempts at conversion of the catalog from PSE9 to PSE 10 seemed to stop at about 35% complete and then I got an unspecified error message. After a few false starts, t he technician had me find a temporary file that was created in that process. In my case the program added temp 1 to the catalog folder name, so it was in a folder called My catalog 1 temp 1. Surprisingly, choosing that catalog in the catalog manager window resulted in what appeared to be a complete catalog/set of thumbnails in the PSE 10 organizer. The technician then had me restore my PSE9 backup in PSE10 (I did a PSE 9 backup before I installed the 10 software) . The restore took some time so I haven't had the opportunity to put it to the test but everything seems to be there, incuding videos and face recognition and I confirmed that I have access to the organizer from Premiere 10 also. I hope this helps you help someone else.
I hope Adobe developers read these forums and use that information to improve their programs this was an awful experience.
Thanks,
Kim

Crystal Data Conversion Issue (Error converting data type varchar to datetime)

Hi,
I can run stored procedure without error in SQL Server using my personal credentials as well as database credentials.
I can also run Crystal Report after connecting to Stored procedure without error on my desktop using my personal credentials as well as database credentials.
But when I upload the crystal report in BOBJDEV and when I run using database credentials report fails saying that "Error in File ~tmp1d1480b8e70fd90.rpt: Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 18456 ]" but I can run the crystal report successfully on BOBJDEV using my personal credentials.
I googled (Data Conversion Error Message) about this issue & lot of people asked to do "Verify Database" in Crystal Report. So I did that, but when I do it I am getting a error message like this:
Error converting data type varchar to datetime.
Where do you think the error might be occurring? Did anyone faced this kind of issue before? If so, how to resolve it?
(FYI, I am using Crystal Reports 2008, & for stored procedure I have used SSMS 2012 )
Please help me with this issue.
Thanks & Regards.
Naveen.

hello Naveen,
since the report works fine in the cr designer / desktop, we need to figure out where you should post this question.
by bobjdev do you mean businessobjects enterprise or crystal reports server? if so please post this question to the bi platform space.
-jamie

Unable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Plea

nable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Please!

Hi skydivingsnowman,
I'm sorry you're having such trouble using the ExportPDF service. What browser are you using?
Please try clearing your browser cache, or using a different browser (here's a list of supported browsers: http://www.adobe.com/acom/systemreqs/.
Please let me know if that works.
Best,
Sara

Converting Oracle TIMESTAMP(4) column to SQL datetime column conversion error in ssis

I could not able to convert Oracle TIMESTAMP(4) column to SQL datetime column conversion error in ssis.
I'm connecting OLEDD Oracle Source to OLEDB SQL Destination in SSIS package. I'm trying to insert data from oracle datetime column into sql datetime column. I'm getting some errors.
Please provide helpful info.

You can transform the data types directly at the source by writing a proper SQL statement, or you can convert them using the data conversion component.
Please refer the below link
http://stackoverflow.com/questions/6256168/how-to-convert-a-timestamp-in-string-format-to-datetime-data-type-within-a-packa

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

What does the "conversion error" I get when converting a pdf file to Microsoft word?

What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

Adobe reader with export to PDF
Sent from my iPhone 5
Marty Kennedy

Conversion Error setting value '33' for 'null Converter'

Hi,everyone,it looks my custom Converter dosen't work.
CreditCard class:
package com.corejsf;
public class CreditCard {
     private String number;
     public CreditCard(){
     public CreditCard(String number){
          this.number=number;
     public String toString(){
          return this.number;
==============================
PaymentBean:
package com.corejsf;
import java.util.Date;
public class PaymentBean {
     private double amount;
     private Date date=new Date();
     private CreditCard card;
     public PaymentBean(){
     public double getAmount(){
          return this.amount;
     public void setAmount(double newValue){
          this.amount=newValue;
     public Date getDate(){
          return this.date;
     public void setDate(Date newValue){
          this.date=newValue;
     public CreditCard getCard(){
          return this.card;
     public void setCard(CreditCard newValue){
          this.card=newValue;
=================================
CreditCardConvert:
package com.corejsf;
import javax.faces.component.UIComponent;
import javax.faces.context.FacesContext;
import javax.faces.convert.Converter;
import javax.faces.convert.ConverterException;
import javax.faces.application.FacesMessage;
public class CreditCardConvert implements Converter{
     public Object getAsObject(FacesContext context,UIComponent component,String newValue) throws ConverterException{
          StringBuilder builderForNewValue=new StringBuilder(newValue);
          boolean foundInvalidCharacter=false;
          char invalidChar;
          int newValueLength=newValue.length();
          int i=0;
          char chFromNewValue;
          while(i<newValueLength && !foundInvalidCharacter){
               chFromNewValue=builderForNewValue.charAt(i);
               if(Character.isDigit(chFromNewValue) || Character.isSpaceChar(chFromNewValue)){
                    i++;
               }else{
                    foundInvalidCharacter=true;
                    invalidChar=chFromNewValue;
                    FacesMessage message=new FacesMessage();
                    message.setDetail("detail error convert message for CreditCard with error Char:"+invalidChar);
                    message.setSummary("summary error convert message for CreditCard with error Char:"+invalidChar);
                    message.setSeverity(FacesMessage.SEVERITY_ERROR);
                    throw new ConverterException(message);
          return new CreditCard(builderForNewValue.toString());
     public String getAsString(FacesContext context,UIComponent component,Object newValue) throws ConverterException{
          return newValue.toString();
===============================
faces-config.xml:
<?xml version="1.0" encoding="UTF-8"?>
<faces-config
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
version="2.0">
     <managed-bean>
          <managed-bean-name>payment</managed-bean-name>
          <managed-bean-class>com.corejsf.PaymentBean</managed-bean-class>
          <managed-bean-scope>session</managed-bean-scope>
     </managed-bean>
     <converter>
          <converter-id>com.corejsf.CardConvert</converter-id>
          <converter-class>com.corejsf.CreditCardConvert</converter-class>
     </converter>
     <navigation-rule>
          <from-view-id>/index.xhtml</from-view-id>
          <navigation-case>
               <from-outcome>result</from-outcome>
               <to-view-id>/result.xhtml</to-view-id>
               <redirect/>
          </navigation-case>
     </navigation-rule>
     <navigation-rule>
          <from-view-id>/result.xhtml</from-view-id>
          <navigation-case>
               <from-outcome>index</from-outcome>
               <to-view-id>/index.xhtml</to-view-id>
               <redirect/>
          </navigation-case>
     </navigation-rule>
</faces-config>
==================================================
index.xhtml:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core">
     <h:head>
          <title>index page</title>
     </h:head>
     <h:body>
          <h:form>
               <table>
                    <tr>
                         <td>
                              <h:inputText id="iptCard" label="card" required="true" convert="com.corejsf.CardConvert" value="#{payment.card}">
                              </h:inputText>
                              <h:message for="iptCard"></h:message>
                         </td>
                    </tr>
                    <tr>
                         <td>
                              <h:inputText id="iptAmount" label="amount" required="true" value="#{payment.amount}">
                                   <f:convertNumber minFractionDigits="2"></f:convertNumber>
                              </h:inputText>
                              <h:message for="iptAmount"></h:message>
                         </td>
                    </tr>
                    <tr>
                         <td>
                              <h:inputText id="iptDate" label="date" required="true" value="#{payment.date}">
                                   <f:convertDateTime pattern="MM/yyyy"></f:convertDateTime>
                              </h:inputText>
                              <h:message for="iptDate"></h:message>
                         </td>
                    </tr>
                    <tr>
                         <td>
                              <h:commandButton value="sumbit" action="result"></h:commandButton>
                         </td>
                    </tr>
               </table>
          </h:form>
     </h:body>
</html>
Can anyone help me,TKS!

And besides,if I change the first inputText to:
<td>
<h:inputText id="iptCard" label="card" required="true" value="#{payment.card}">
     <f:convert convertId="com.corejsf.CardConvert"></f:convert>
</h:inputText>
<h:message for="iptCard"></h:message>
</td>
The app runs and result in:
WebContent/index.xhtml @13,55 <f:convert> Tag Library supports namespace: http://java.sun.com/jsf/core, but no tag was defined for name: convert
Is any configuration problem there?
TKS!

How to custom a conversion error in JSF page in JDeveloper

According to the book "Core JavaServer Faces" p213 (fifth edition), if I add the following line to messages.properties file, and specifiy it in the faces-config.xml and .jsp file, then the displayed conversion error message should be my tailored one instead of the default. However, I still get the default error message. Besides, I didn't find "CONVERSION" variable in UIInput class. Is the book wrong? And what's the correct way?
javax.faces.component.UIInput.CONVERSION=Please correct your input

I didn't choose any special in JDeveloper IDE. I just selected "new" to create a file called "message.properties" and put the line there. I didn't specify converters excepts declaring the type in the Jave Beans. I guess the converting is done by the JSF framework automatically. It must be a JSF converter since I created the page as a JSF page.

Error while impdp: ORA-02374: conversion error loading table

Hi,
I am trying to convert the character set from WE8ISO8859P1 to AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 to WE8MSWIN1252 in source DB to get rid of “lossy” data. I created new database(target) with character set AL32UTF8 and nls_length_semantics = ’CHAR’ and created all the tablespaces as in source DB with auoexend on. I took full export (expdp) of source DB excluding TABLESPACE,STATISTICS,INDEX,CONSTRAINT,REF_CONSTRAINT and imported using impdp to target DB. I found below error in the import log file:
ORA-02374: conversion error loading table "SCTCVT"."SPRADDR_CVT"
ORA-26093: input data column size (44) exceeds the maximum input size (40)
ORA-02372: data for row: CONVERT_STREET_LINE1 : 0X'20202020202020202020202020202020202020202020202020'
I checked with select query on both DBs with below results.
source DB:
04:58:42 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74553
target DB:
04:59:24 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74552
please suggest me a solution to this.
Thanks and Regards.
Edited by: user12045167 on May 9, 2011 10:39 PM

Thanks for your update maher.
09:15:53 SQL> desc "SCTCVT"."SPRADDR_CVT"
Name Null? Type
SPRADDR_PIDM NUMBER(8)
CONVERT_PIDM VARCHAR2(9 CHAR)
SPRADDR_ATYP_CODE VARCHAR2(2 CHAR)
CONVERT_ATYP_CODE VARCHAR2(2 CHAR)
SPRADDR_SEQNO NUMBER(2)
CONVERT_SEQNO VARCHAR2(2 CHAR)
SPRADDR_FROM_DATE DATE
CONVERT_FROM_DATE VARCHAR2(8 CHAR)
SPRADDR_TO_DATE DATE
CONVERT_TO_DATE VARCHAR2(8 CHAR)
SPRADDR_STREET_LINE1 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE2 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE2 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE3 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE3 VARCHAR2(40 CHAR)
SPRADDR_CITY VARCHAR2(20 CHAR)
CONVERT_CITY VARCHAR2(25 CHAR)
SPRADDR_STAT_CODE VARCHAR2(3 CHAR)
CONVERT_STAT_CODE VARCHAR2(25 CHAR)
SPRADDR_ZIP VARCHAR2(10 CHAR)
CONVERT_ZIP VARCHAR2(15 CHAR)
SPRADDR_CNTY_CODE VARCHAR2(5 CHAR)
CONVERT_CNTY_CODE VARCHAR2(5 CHAR)
SPRADDR_NATN_CODE VARCHAR2(5 CHAR)
CONVERT_NATN_CODE VARCHAR2(5 CHAR)
SPRADDR_PHONE_AREA VARCHAR2(3 CHAR)
CONVERT_PHONE_AREA VARCHAR2(3 CHAR)
SPRADDR_PHONE_NUMBER VARCHAR2(7 CHAR)
CONVERT_PHONE_NUMBER VARCHAR2(7 CHAR)
SPRADDR_PHONE_EXT VARCHAR2(4 CHAR)
CONVERT_PHONE_EXT VARCHAR2(4 CHAR)
SPRADDR_STATUS_IND VARCHAR2(1 CHAR)
CONVERT_STATUS_IND VARCHAR2(1 CHAR)
SPRADDR_ACTIVITY_DATE DATE
CONVERT_ACTIVITY_DATE VARCHAR2(8 CHAR)
SPRADDR_USER VARCHAR2(30 CHAR)
CONVERT_USER VARCHAR2(30 CHAR)
SPRADDR_ASRC_CODE VARCHAR2(4 CHAR)
CONVERT_ASRC_CODE VARCHAR2(4 CHAR)
SPRADDR_DELIVERY_POINT NUMBER(2)
CONVERT_DELIVERY_POINT VARCHAR2(2 CHAR)
SPRADDR_CORRECTION_DIGIT NUMBER(1)
CONVERT_CORRECTION_DIGIT VARCHAR2(1 CHAR)
SPRADDR_CARRIER_ROUTE VARCHAR2(4 CHAR)
CONVERT_CARRIER_ROUTE VARCHAR2(4 CHAR)
SPRADDR_GST_TAX_ID VARCHAR2(15 CHAR)
CONVERT_GST_TAX_ID VARCHAR2(15 CHAR)
SPRADDR_REVIEWED_IND VARCHAR2(1 CHAR)
CONVERT_REVIEWED_IND VARCHAR2(1 CHAR)
SPRADDR_REVIEWED_USER VARCHAR2(30 CHAR)
CONVERT_REVIEWED_USER VARCHAR2(30 CHAR)
SPRADDR_DATA_ORIGIN VARCHAR2(30 CHAR)
CONVERT_DATA_ORIGIN VARCHAR2(30 CHAR)
SPRADDR_CVT_RECORD_ID NUMBER(8)
SPRADDR_CVT_STATUS VARCHAR2(1 CHAR)
SPRADDR_CVT_JOB_ID NUMBER(8)
so here we can see its value is 40 (CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)).
shall i go ahead altering the column?

ME21N--Quantity conversion error in net price calculation

Hi MM experts,
Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
i) the conversion results in a net price that is too high, or
ii) the conversion factor for the units has not been properly maintained.
iii) Check whether the units of measure and their conversion factor are correct.
I have checked material master>unit of measure> 1 PL = 22 KG maintained.
Can you please tell me how to resolve this issue?
Appreciated early response.
Thanks in advance.
Suresh

Hi Suresh,
Please check on Material Master Data - Accounting 1 tab - Price Unit
Moshe

Quantity conversion error in net price calculation in BAPI_PO_CREATE1

I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
quantity conversion error in net price calculation.
plz guide me to remove it.

Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
Good luck!

Sender file adapter conversion Error!!

Hello every one....
I am stuck with a problem...in my scenario,, there are possiblities that file may contain more than required paramters... in such case,,, paramters defined in conversion should go ahead and others should be ignored...
for this very purpose i added the paramter:
row.fieldSeparator                 ,
row.fieldNames                     orderno,authcode,status
row.endSeparator                  'nl'
row.additionalLastFields      ignore
the scenario works fine if the file contains thrree comma separated values but it raises an error if no of paramters increase as :
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting
document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration: more
elements in file csv structure than field names specified!
we are using PI 7.... does it require some more configuration in additoin to paramter row.additionalLastFields
any help in this regard would be highly appreciated...
thanx

this parameter is already set, and this is the exact behavior i want from adapter engine... but the problem
here is different... the exception is raised at communication channel's conversion routine level,,, the retry
interval is not the one defined in visual admin but infact the interval (polling) time defined in communication
channel.... the system does'nt stop after 3 attempts,, but infact keep on trying to read it....
one peice of information i have found is in sap note:821267 , which states:
*Q35:*
Q: I have configured a File Sender channel with File Content
Conversion or a custom-developed module, which may throw an
exception. When the File Adapter encounters an invalid file, which
triggers a conversion error or an exception in a module, the
adapter will enter a retry interval and upon each following
processing attempt try to process the faulty file. This basically
prevents the File Adapter from picking up files that are located
after the fauilty file according to the configured sort order. How
can I change this behavior?
o A: This is by design. When the File Adapter encounters an invalid
file, manually remove this file from the configured source
directory. You can configure an alerting rule to get notified each
time this occurs.
We are currently evaluating possible solutions that could be used
to skip this manual interaction.
now can there be a way around to make communication channel read the file only 3 times (value defined in adapter engine profile in visual admin)
I have thaught of writing of module.... but the error is raised even before calling module !!
any further clue ???

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails                                        --> Message Type
   JobCode                                                      --> Node
        EmployeeNumber            xsd:string
        Domain                           xsd:string
   JobTrack                                                     --> Node
         Department                    xsd: string
         Position                         xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure:    JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails    namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

XML to ABAP Conversion Error - CX_SY_CONVERSION_DATA_LOSS

REPORT y_rpt_test                              .
TYPE-POOLS sscr.
DATA: restrict TYPE sscr_restrict,
opt_list TYPE sscr_opt_list,
*** TYPE sscr_***.
DATA: options TYPE STANDARD TABLE OF rfc_db_opt ,
fields TYPE STANDARD TABLE OF rfc_db_fld ,
meta TYPE STANDARD TABLE OF ywas_metadata ,
xml_out TYPE string .
data: xml_out_x type xstring.
DATA: wa_options LIKE LINE OF options,
wa_fields LIKE LINE OF fields ,
wa_meta LIKE LINE OF meta .
FIELD-SYMBOLS: <outtab> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
DATA: xslt_error TYPE REF TO cx_xslt_exception ,
xslt_message TYPE string .
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
TYPES: BEGIN OF s_text,
         partnum(18)     TYPE c,
         LONG_DESC(3000)    TYPE c,
       END OF s_text.
data: lt_outtab type standard table of s_text,
      is_outtab type s_text.
data: it_temp_text(1000) TYPE c OCCURS 0 with header line.
data : l_file TYPE string value 'C:xmlload.xml'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = l_file
    FILETYPE                      = 'ASC'
tables
    data_tab                      = it_temp_text.
loop at it_temp_text.
    concatenate xml_out it_temp_text into xml_out.
endloop.
    IF NOT xml_out IS INITIAL .
      TRY .
          CALL TRANSFORMATION (`ZTEST1`)
          SOURCE XML xml_out
          RESULT outtab = lt_outtab.
        CATCH cx_xslt_exception INTO xslt_error.
          xslt_message = xslt_error->get_text( ).
          WRITE:/ xslt_message .
      ENDTRY.
    ENDIF .
    break-point.
    write : / 'test'.
==========================================================
I am using above code to convert input XML file into internal table I am getting conversion error. My input XML file looks is as follows. It is throwing this error in call transformation. Appreciate your help in Advance.
<MODIFIED BY MODERATOR - RESPECT THE 2,500 CHAR LIMIT>
Code Formatted by: Alvaro Tejada Galindo on Jan 4, 2010 3:31 PM

Thanks for quick response.
I think the problem is with special characters in the input XML file. If I don't have special characters in XML file then it works fine.
Anyway here is the XSLT code. This is a generic XSLT code which I used from one of the examples
posted on this site.
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:xa="urn:schemas-microsoft-com:xml-analysis:mddataset" xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<xsl:output method="xml" />
<xsl:variable name="fieldNames" select="//asx:abap/asx:values/FIELDCAT" />
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>

<OUTTAB>
<xsl:apply-templates select="//item" />
</OUTTAB>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="//YWAS_METADATA">
<item>
<xsl:for-each select="*">

<xsl:copy>
<xsl:apply-templates select="@*|*|text()"/>
</xsl:copy>
</xsl:for-each>
</item>
</xsl:template>
<xsl:template match="//item">
<item>
<xsl:for-each select="*">

<xsl:copy>
<xsl:apply-templates select="@*|*|text()"/>
</xsl:copy>
</xsl:for-each>
</item>
</xsl:template>
</xsl:stylesheet>

Catolog conversion error converting a PSE3 to PSE10

Similar Messages

Maybe you are looking for