CatOS copy run star
Need a little help with a command. How in CatOS to copy run star? What is the analog command to copy run star(from IOS), in CatOS?
Hi Friend,
As everyone updated here in CATOS the config are saved automatically if the config mode is set to binary which is by default.
Incase you are in text mode you have to save the config but in text mode also you can confiure the config to be saved automatically and can specify a time interval also.
set config mode text {nvram | device:file-id}
This link will give you a lot of information about the config mode and the usgae guidelines
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/ses_sete.htm#wp1153974
HTH
Ankur
Similar Messages
-
i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?
Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants. -
Trying to redeem my digital copy of Star Trek, the movie, and iTunes tells me I've already redeemed it, or the redemption code is invalid. Any help woud be greatly appreciated
You don't say which film you're struggling to download, I had problems with a-team and I ended up emailing the address on the leaflet, turns out they had a lot of problems with people's codes, they then gave me a new code to use! I have now managed to get the film downloaded?
-
Mesage "A client copy run is currently active" when running SCC1
Hello
I get a mesage "A client copy run is currently active" when running SCC1. So I can not transport tr. req from source client.
Last client copy was 2 years ago
Please for helpCheck SCC3 for CC traces, you'll see what is going wrong there.
regards
Juan -
Prime LMS 4.2 to save devices configurations "copy run start"
we need to create a job on LMS to save the configurations on the network devices, like everyday LMS should run "copy run start" on all the devices.
Any one can assist, thanksYou can create a NetConfig job using LMS, which can do this for all LMS managed devices. You can simple select an Adhoc job and use command copy run start and schedule as per you requirement.
Check more details here on NetConfig.
Also, You can generate an Out-of-Sync report for the group of devices for which running configurations are not synchronized with the startup configuration from :
From here you can directly sync the devices which will do the same task of doing copy run start. Unfortunately, it cannot be scheduled and hence needs to be checked manually usually.
Check details on Out-of-Sync here.
-Thanks
Vinod
**Encourage Contributors. RATE them** -
Firefox would't install updates since 3.6.4 - another copy running
Firefox wouldn't intstall updates "another copy running on computer". This makes opening Firefox after update almost impossible, because the error notice immediately pops up. Brand new installation works, but does no eliminate the problem. XP Professional SP 3.
== This happened ==
Every time Firefox opened
== I updated to 3.6.4 ??same here.
-
Syslog massage for copy running-config
Hello,
i have syslog server and i want to receive syslog message that say "config saved" from the switch/router.
i cant find any log message that syslog generate for the copy command.
can i achieve this with EEM ?
i need this for NX-OS and regular IOS.
Thanks.Hello Ricarte,
Not sure I follow your question but let me explain something:
can i copy running-config to another file in the flash, do testing on it, if something goes wrong, put it back. like...
asa>copy running-config my-config
Yes, it is possible
copy my-config running-config
This will do a merge of both the file my-config and the running-config.. It will be a merge.
A merge adds any new commands from the new configuration to the running configuration. If the configurations are the same, no changes occur. If commands conflict or if commands affect the running of the context, then the effect of the merge depends on the command. You might get errors, or you might have unexpected results. -
Cisco Prime Infrastructure 1.2 config deployment (no copy run start)
I have deployed some CLI templates I have created to configure multiple local accounts on some switches. However the cli templete only appears to accept conf t commands, it will not accept 'write mem' or 'copy run start' at the end to save the altered running config to startup. this results in running and startup being 'out of sync' in the configuration archives, and runs the risk of a power failure causing the config to revert back to startup. Does anyone know how to ensure the altered running config is saved to startup during the config template deployment?
I don't know if this has been fixed in 2.0 or not. By the looks of the bug it hasn't. However, there is a workaround-
https://tools.cisco.com/bugsearch/search?kw=prime%20infrastructure%20copy%20run%20start&pf=prdNm&sb=anfr&srtBy=byRel&bt=custV
BugID
CSCuf89957
Prime Infrastructure - No option to save running config to startup
Conditions:
Prime Infrastructure 1.2/1.3
Workaround:
Create a Configuration Template that runs either:
"do write mem"
Or for devices which no longer support "write mem", use:
"file prompt quiet
do copy run start
no file prompt quiet" -
I downloaded my digital copy of Star Trek Into Darkness, but it's HD and I can't play it. I didn't see anything about whether I wanted HD or Standard. How do I get this changed?
Check the mute switch on the side above the volume rocker. If the red dot shows, the phone is muted. You'll still be able to play the ringtones to select one.
I find that the switch can be thrown to "mute" by accident when I put my iPhone in my belt holster. -
Copy running song from iPhone player to my application
I want to access the assetURL of song playing in my iPhone default player. I can get the assetURL from Media Player framework but I am not able to use that path anywhere in my app. Is there any alternate if I can copy the contents of running song to my app's .mp3 file? I need to generate beats (visualization of bars) when the song runs.
Also, if anyone can let me know the way how can I integrate own music player and music beats concept?http://lmgtfy.com/?q=how+to+copy+text+messages+from+iphone+to+computer
-
There are two separate desktops on this computer, one for me and one for another user. Her Firefox is not affected. I have looked everywhere for this second copy supposedly running but I don't see how it can be because I have shut down all programs several times.
There are a few possible causes for that error, for details see [[Firefox is already running but is not responding]].
-
Local client copy running from long time
Hi Experts,
The local client copy is running from very long time at the phase "Post Processing"(since 14 hrs).
and our database size is 971.5 GB.
Could some body help me , generally how much time it will take to complete this phase,
and really if some thing is going wrong could you please where to check why its taking this much time.
Current screen shot:
Target Client 400
Source Client (incl. Auth.) 500
Source Client User Master 500
Copy Type Local Copy
Profile SAP_ALL
- Restart X
Status Processing (Restart)...
User SAP*
Start on 14.03.2011 / 10:10:11
Last Entry on 15.03.2011 / 22:06:46
Current Action: Post Processing Component
- Last Exit Program RSSOUSCO_FOR_CC BC-SRV-GBT
Statistics for this Run
- No. of Tables (Total) 55537 of 55852
- In This Run 0 of 315
- Previously Copied Tables 55537
- Deleted Lines 39542230
- Copied Lines 300488666
Thanks in advance.
Suresh BabuHi,
As sunny explained.. there is lot of factors involved in Client copy.
1) Database Size
2) Tables
3) System Resources
You can exclude the tables in client copy if you really dont need the data of tha particular tables while scheduling the client copy.
any way we could see that No. of Tables (Total) 55537 of 55852 copied.. it's almost done 300+ tables are there to copy.
-Srini -
Running STAR program in Date Effective mode
Hi All,
How the date effective mode of Synchronize Territory Assignment rule concurrent will work? Will it sync all the active territories in that date range? For example if I run the STAR program from 01-Mar-2010 to 31-Mar-2010, will it sync all the territories which are all active in this date range? Will it pick up the territory which has start date as 01-Feb-2010 and end date as 30-Apr-2010?
Please advice..
Thanks,
Suresh.The only emulator for running Classic apps I know of is SheepShaver, and from what I've read (though not confirmed) it doesn't work under Snow Leopard (not surprising; SheepShaver hasn't been update in over three years, from what I can see). It also requires the ROM image from an older Mac, and if someone had access to an older Mac to get the image, they could just run the app on that older Mac.
So I think that the ability to run Classic apps is now completely dead as of Snow Leopard. -
EEM to verify cfg file before copy running
I've scripted over the years in many languages. Just not TCL.
I'm wondering the feasability of intercepting a copy tftp running command, and doing a simple sanity check before execution.
Basically if my router/switch is hostname:R1, I want to copy the file to the local disk/flash, verify it has a hashtag with a hostname that MATCHES the existing box, and if so, copy said file into running.
1) I realize that not all devices have the same storage, so eaither assume that I'm writing this for a specific platform, or get crazy on captuering the local resources.
2) I know you can intercept CLI command and 'block' it. And supercede it with my own creations.
3) I do not know if you can open local files, and scan them/read them.
4) I do know that I can just execute a command to copy x running once I've passed my check.
Any other ideas on this subject?
I'm basically trying to prevent the copy tftp to running from being quite SO instant. Adding a level of "This is what is going to happen, are you sure?" That prompt isn't just are you sure you want to copy file x. But here IS file X, look at it... Now are you sure? Or, this hostname doesn't match the tag. Seems wrong... Are you sure?
--AllenI'm not sure what you mean by hashtag, but you can certainly intercept the command and pre-check the file to be copied. You can even prompt the user to make sure they know what will be happening. If all the verification checks out, then all you need to do is exit with a non-zero status code. That will cause the original command to execute.
So bottom line is that everything you want to do sounds doable (of course that's without knowing what you mean by hashtag). -
How to copy (running) instance
I need to get up on my computer with MSSQL Server 2005 SP2 an exact copy of running MS SQL Server 2005 SP1 instance (with system objs, accounts, etc.).
In the same LAN.
Well, not exact one but the one as close as possible...
And what exactly may I mimick without interfering to existing SS2005 in production?
What is the best way to do it without invoking excessive (manual) work and problems?
I see dozens of ways and I am still in doubt...
No ideal or straight-forward solutionThe 'best' way is to BACKUP the Production database(s) and RESTORE them on the SP2 instance.
In order to have the Jobs, accounts, you will have to also BACKUP and RESTORE the msdb and master databases. Read these articles for more assistance.
Moving Server/Database/Logins
http://vyaskn.tripod.com/moving_sql_server.htm Moving DBs
http://msdn2.microsoft.com/en-us/library/ms345408(en-US,SQL.90).aspx Moving system dbs 2005
http://www.support.microsoft.com/?id=314546 Moving DB's between Servers
http://www.support.microsoft.com/?id=221465 Using WITH MOVE in a Restore
http://www.sqlservercentral.com/columnists/cBunch/movingyouruserswiththeirdatabases.asp Moving Users
http://www.support.microsoft.com/?id=246133 How To Transfer Logins and Passwords Between SQL Servers
http://www.support.microsoft.com/?id=298897 Mapping Logins & SIDs after a Restore
http://www.dbmaint.com/SyncSqlLogins.asp Utility to map logins to users
http://support.microsoft.com/kb/274188 Troubleshooting Orphan Logins
http://www.support.microsoft.com/?id=240872 Resolve Permission Issues -Database Is Moved Between SQL Servers
http://www.sqlservercentral.com/scripts/scriptdetails.asp?scriptid=599 Restoring a .mdf
http://www.support.microsoft.com/?id=307775 Disaster Recovery Articles for SQL Server
http://www.support.microsoft.com/?id=320125 Moving a Diagram
http://www.sqlservercentral.com/scripts/contributions/1598.asp Script Roles and Permissions
http://sqljunkies.com/HowTo/B9F7F302-964A-4825-9246-6143A8681900.scuk Move Tables to New Files
Maybe you are looking for
-
?
-
Unable to enter text in popup window
Hi, I am new to OATS OpenScript. I am unable to enter text in the popup window. Here's my situation in detail: My application is in Oracle Siebel and the pop up is a webpage dialog. When I click on the Button in Siebel application, the webpage dialog
-
How to handle multiple spatial operators and\or-ed in 10g express(locator)?
I've noticed that I cannot run certain queries in 10g express, which run perfectly in 10g enterprise. The following query is an example: SELECT S_ID, SDO_NN_DISTANCE(1) from MAP.BYGG_POLY where SDO_WITHIN_DISTANCE(GEOM, mdsys.sdo_geometry(2001, NULL,
-
Send a mail to partner of shipping point
Hi, For shipment document (VT01N / VT02N), I need to send a mail to partner assign to shipping point irrespective of output type. That is when the user make an output entry as output type, communication medium (email),function(shipping point) and par
-
How to insert String variables in Execute Immediate Statement
Hi, I have query dept varchar2(10); dept :='electronics' l_dyn_sql_input600_cbs := 'select EmployeeName,AGE,' || dept ||' from Employee' EXECUTE immediate l_dyn_sql_input600_cbs; when i run the query it says "electonics" Invalid identifier. Can anyon