CatOS to IOS Converter tool

Hi,
Does anybody have any experience of using the CatOS to IOS Converter tool on a Sup720?
Just to be clear, I'm not referring to the Configuration conversion tool but to the actual OS conversion tool. The CCO document (http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008070f124.shtml)
indicates the tool was tested on a Sup2 only but i was wondering if it could be used with the Sup720's as well?
If not i assume everyone would suggest the manual method as the preferred method of converting from Hybrid to Native?
Thanks

Cisco Software Config. Tools for Cat6000:
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-config-converter

Similar Messages

  • Convert Qos commands from CATOS to IOS

    Hello,
    i've some problems converting some Qos commands from CATos to IOS can anybody help me?
    set qos drop-threshold 1q4t rx queue 1 50 60 80 100
    set qos map 2q2t tx 1 1 cos 0
    set qos map 1p1q4t rx 1 3 cos 4
    set qos wrr 1p2q2t 50 255
    set qos txq-ratio 1p2q2t 70 15 15
    set qos wred 1p2q2t tx queue 1 70:100 70:100
    set qos bridged-microflow-policing disable 1,50-54,100-121,500,700-702,1006-1011,1016
    set qos policed-dscp-map 1:1
    set qos policed-dscp-map excess-rate 0:0
    set qos acl default-action ip dscp 0
    set qos acl default-action ipx
    set qos acl default-action mac
    set qos policy-source local
    set qos rsvp disable
    set qos rsvp policy-timeout 30
    set qos rsvp local-policy forward
    !Module with GE interfaces
    set port qos 3/1-16 cos 0
    set port qos 3/1-16 trust trust-cos
    set port qos 3/1-16 port-based
    set port qos 3/1-16 policy-source local
    set qos statistics export port 3/1 disable
    set qos statistics export port 3/2 disable
    set qos statistics export port 3/3 disable
    set qos statistics export port 3/4 disable
    set qos statistics export port 3/5 disable
    set qos statistics export port 3/6 disable
    set qos statistics export port 3/7 disable
    set qos statistics export port 3/8 disable
    set qos statistics export port 3/9 disable
    set qos statistics export port 3/10 disable
    set qos statistics export port 3/11 disable
    set qos statistics export port 3/12 disable
    set qos statistics export port 3/13 disable
    set qos statistics export port 3/14 disable
    set qos statistics export port 3/15 disable
    set qos statistics export port 3/16 disable

    This URL should help you:
    http://www.cisco.com/warp/public/473/73.html

  • 6509 conversion from CatOS to IOS

    I am interested in hearing from those who have converted from CatOS to IOS using 6500 as primarily a LAN switch with InterVLAN routing. Are there valid reasons / advantages to running IOS over CatOS? It seems to me that the CatOS is more efficient language for configuring switch ports and the IOS is better for configuring routing. I use 6509 in the core for server farms mostly and with the integration of many IOS based switches (3750) I am considering migrating the 6509 to IOS as well.
    Thanks,
    Greg

    Greg,
    Cisco may support CATOS for a while, but I do think that they may end of life it in the future. Thats why there is a big push on the IOS over CATOS.
    I feel that the IOS is equally efficient in configuring switch ports as CATOS. You can use interface range commands to configure common parameters to a range of switch ports. And the great thing about configuring switchports in IOS is that it will have the same syntax like your 3750 switches.
    Here is a link that compares commands on both switches which will help a lot after migration.
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010e9d5.shtml
    Sankar
    PS: please rate helpful posts!

  • CatOS to IOS conversion without RP

    We have a Cat 6509 with a WS-SUP32-GE-3B and want to convert the CatOS to IOS. We need to know if we can do the conversion, since we don't have a Route Processor implemented on the switch infrastructure. This environment consists of pure layer 2 switches with stand alone switch processors and no routing capabilities. Everything we've read shows navigating into the RP to load the new image. Would we be capable of converting to IOS in this instance?
    Thanks for any help..

    I am not at the remote site, but this is the show module for the CAT 6509:
    Here's the list of modules within the chassis:
    Mod Slot Ports Module-Type Model Sub Status
    1 1 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
    2 2 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
    3 3 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
    4 4 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok
    5 5 9 1000BaseX Supervisor WS-SUP32-GE-3B yes ok
    6 6 48 10/100/1000BaseT Ethernet WS-X6148A-GE-TX no ok

  • Catalyst 6509 Conversion from CatOS to IOS.

    Hi,
    I am converting a Cat6509 Sup720 CatOS to IOS.The switch also has a FWSM configured. During converting CatOS to IOS will the FWSM configuration be erased or affected by any means ?
    Regards
    Kas

    there should be no affect or deletion/problems with the FWSM during your IOS conversion.
    haven't seen any issues in my LAB. the conversion process has a part where the CatOS commands/config are converted to the IOS commands/config required.
    you should make sure you backup the FWSM configuration and partitions before you begin.
    please see the following link for the CatOS to IOS conversion tasks for the sup720:
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_720

  • CATOS to IOS commands

    Hi,
    Just wandering if someone could tell me the IOS equivalent to these CATOS commands. I have been to the CATOS TO IOS Conversion utility Page and to be honest it doesn't work properly and skips a majority of commands.
    The CATOS commands l need translated to IOS are :
    set trunk 11/8 nonegotiate dot1q 1-1005,1024-4094
    clear trunk 11/8 1006-1023
    clear trunk 11/6 1-39,41-99,101-339,341-419,421-4094
    set trunk 11/6 nonegotiate dot1q 40,100,340,420
    clear trunk 11/13 1006-1023
    set trunk 11/13 auto-negotiate 1-1005,1024-4094
    #IPACLVLAN280
    set qos acl ip IPACLVLAN280 dscp 32 ip any any
    commit qos acl all
    set qos acl map IPACLVLAN280 280
    Thanks much appreciated

    hi,
    the three trunk command-blocks should be converted in this way:
    clear trunk 11/8 1006-1023
    set trunk 11/8 nonegotiate dot1q 1-1005,1024-4094
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1-1005,1024-4094
    switchport mode trunk
    clear trunk 11/6 1-39,41-99,101-339,341-419,421-4094
    set trunk 11/6 nonegotiate dot1q 40,100,340,420
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 40,100,340,420
    switchport mode trunk
    clear trunk 11/13 1006-1023
    set trunk 11/13 auto-negotiate 1-1005,1024-4094
    switchport trunk encapsulation negotiate
    switchport trunk allowed vlan 1-1005,1024-4094
    switchport mode dynamic auto
    kind regards,
    Bernhard

  • Using batch convert tool on my website

    Can anyone help me out with a few questions:
    1)  How can I use Batch Convert tool on my website where I will be able to process the files with an automated process?
    2)  How and from where can I get the API to embed on my website?
    3)  I want to automate the batch conversion process so that no human intervention is required. Can I do that?
    Appreciate the answers.

    amit.wadhwa wrote:
    Can anyone help me out with a few questions:
    1)  How can I use Batch Convert tool on my website where I will be able to process the files with an automated process?
    2)  How and from where can I get the API to embed on my website?
    3)  I want to automate the batch conversion process so that no human intervention is required. Can I do that?
    The batch processor in Audition is an internal tool, not an external one so no, you can't use it on your website because it's DAW, not a web development kit. There's no API available.

  • PRC Converter Tool doesn't work!

    Hi
    i wanna to use the PRC Converter Tool, included in midp_palm-1_0-beta.zip, to converter the sampler.jad to a prc file. However it doesn't work. No File had generated after i selected the sampler.jad file and clicked the convert button.
    i'm using win2k with jdk1.4.
    any idea?
    Ziong

    I found that it's not work only in jre1.4. It works fine in jre1.3.1.
    But the MIDP for Plam OS User's Guide claim that use jre 1.3 or later. Is it a bug in jre1.4?

  • Question Raw Converter Tool Box Again

    I have a question on the
    Raw Converter tool box.  When I open some Raw photos, correct them with the Raw Converter Tool Box that automatically comes up with PSE 8,  and then click "Open Images" I am taken to the PSE view screen as if I had opened a JPEG.  The Raw Converter Tool Box then vanishes.  How can I get the tool box back without closing and then reopening the Raw File?  Thanks Robert.

    Thanks Barbara B.  Your timely answer was most helpful.
    Robert

  • Converter tool usage

    Hi,
    I am trying to convert class files to cap file using converter tool in dev kit 2.2.1
    Go to bin directory of dev kit.
    run command line:
    converter -d rootFolder
    The output of command line is always "C:/ Program" is not recognized as an internal or external command..."
    Could you tell me where i have to modify to make it work? I am using windows xp.
    ps: I know there is a way of using file config, could you give me an example of the file config? i am not sure how to structure it.
    thanks,
    Hoang Long
    Edited by: CardM on Jul 11, 2011 9:16 PM
    Edited by: CardM on Jul 11, 2011 9:18 PM

    CardM wrote:
    i know we can resolve this problem by install java home to a specific directory that there is no space within its path.
    But it is still good if oracle resolves it instead of one who installs java.There is at least one post (not sure how far back, maybe within 6 months) that goes through what batch files to modify to make this work. You need to quote the JAVA_HOME variable from memory so that windows recognises the full path to java.exe.
    Cheers,
    Shane

  • PRC Converter Tool Err

    Hi!
    I've been using the PRC Converter Tool for Palm successfully for several conversions, but now I encounter the following for one of my projects:
    "Result:Failed: JAD error:JAR server not found"
    Appreciate if someone could advice what's causing the error. TIA!
    Regards
    seckyuen

    [seckyuen],
    There are 5 predefined attributes that must be present in an application descriptor JAD file:
    MIDlet-Name
    MIDlet-Version
    MIDlet-Vendor
    MIDlet-Jar-URL
    MIDlet-Jar-Size
    If any of these 5 attributes are not present, then there will be errors.
    From the looks of the error message you received, it looks like the MIDlet-Jar-URL entry is not in the JAD file.
    Inspect your JAD file and let us know the outcome, I'm sure the people of the forums will be eager to know.
    HTH.
    Allen Lai
    Developer Technical Support
    SUN Microsystems
    http://www.sun.com/developers/support/

  • Catalyst 5505 conversion from CatOS to IOS

    I want to know if somebody has the CatOS to IOS conversion procedure for a Catalyst 5505.
    Thank´s a lot
    Jorge

    The Cat 5000s always run only CATOS. Only the L3 module supports IOS.Only the sup engines on the6500 and7600 support theconversion from CATOS toIOS.

  • Sup32 from CATOS to IOS

    I am about to begin a conversion from CATOS to IOS. I was wondering if I could do the following:
    1: Use a new flash card, and format it in an NATIVE IOS Sup720
    2: Put the correct code and configuration on it
    3: Put it in the Sup32 and rebooted it
    Would this then allow the Sup32 to boot up using IOS and not CATOS. I know I may have to copy the configuration from the flash to NVRAM but it seems like the quickest process, instead of the 30 minutes based on CCO documentation.
    Thanks

    I actually just tried this and it workerd. I took a sup32 that was running CATOS. Put in a CF card that was formated in a SUP720 with the IOS image on it. Replaced the on-board CF card with the new one. The system booted and couldn't find and files. I put the boot variable in ROMMON mode and bam up and running. Just had to change the bootvar in IOS and create the new config. Much faster than doing two copies of a 76MB file.

  • "You're missing the video converter tool"

    Recently I have been seeing an ad popping up on Safari on my iPad that says "You're missing the video converter tool". This seems malicious. How do I get rid of it?

    Stop visiting the sites where it occurs
    Turn off pop ups: Settings app > Safari > Block Popups [turn ON]
    You may also want to clear your browser cache while you are there (Clear History and Clear Cookies and Data)
    It is also likely not malicious, just an add (and annoying), but regardless will not be able to install malware.

  • Exportmap option in converter tool

    I try to create CAP and EXP files for the library components (lang, framework, security, etc.) of a JCVM.
    In order for the JCVM to be 'universal', the different tokens (class, method) should be those as defined by the export files JCDK.
    The Converter tool has the -exportmap option just for this.
    However when I specify the -exportmap option, the file so defined is ignored by the Converter tool.
    Also the documentation does not seem to be correct, since besides an export filename one must also specify an AID and version.
    Can anyone tell me the correct format, preferably with an example?
    Thanks !!

    This option is never implemented by SAP so it does not do anything. It has been there for 5 years but SAP is not even removing it.
    Alpesh

Maybe you are looking for