Catproc invalid after catupgrd --- 11g Manual Upgrade

Hi All,
I hv upgraded database from 9i to 11g.
After upgrade i checked
select comp_id,status,version from dba_registry;
CATPROC shows me INVALID.
Waiting for your reply
Thanks in advance

user9161658 wrote:
HI,
I tried but now it shows me catproc,catalog invalid.
i shutdown & startup with upgrade.
ran @?/rdbms/admin/utlrp.sql
even now it showing me
catalog
catproc invalid
Regards,There should be a log file from the steps that you ran. That should point you to the original error. You'll likely need to correct that first before proceeding with rerunning your manual upgrade. Assuming that you have a support contract then the best advice would be to contact them. If you don't you essentially have 2 options now.
1) Restore the backup you took of the 9i database, determine the cause of the upgrade failure, correct for it, and repeat the upgrade.
2) determine the cause of the upgrade failure, correct for it and resume your current upgrade - likely means rerunning catupgrd.sql again.
Niall Litchfield
http://www.orawin.info/

Similar Messages

  • Question on 11g Manual Upgrade (Step #33)

    In the Note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2 (Doc ID 837570.1), under Step #33
    Step 33
    Upgrade Statistics Tables Created by the DBMS_STATS Package
    If you created statistics tables using the DBMS_STATS.CREATE_STAT_TABLE procedure, then upgrade these tables by executing the following procedure:
    EXECUTE DBMS_STATS.UPGRADE_STAT_TABLE('SYS','dictstattab');
    In the example, 'SYS' is the owner of the statistics table and 'dictstattab' is the name of the statistics table. Execute this procedure for each statistics table.
    How do we know which tables were previously created with DBMS_STATS.CREATE_STAT_TABLE prior to upgrade?”
    Thank you very much.

    Hello and welcome to the forums.
    The statistics tables created by DBMS_STATS, are used for exporting/importing statistics, these tables are not used by the optimizer. So if you are not planning to import statistics, you don't need to find (and update) these tables.
    Anyway, stats tables have a basic table structure and can be found by the following query:
    SELECT OWNER, TABLE_NAME FROM DBA_TAB_COLUMNS WHERE
    COLUMN_NAME = 'STATID' AND DATA_TYPE= 'VARCHAR2' AND DATA_LENGTH=30Check if the listed tables have also these columns:
    Name                                      Null?    Type                       
    STATID                                             VARCHAR2(90)               
    TYPE                                               CHAR(3)                    
    VERSION                                            NUMBER                     
    FLAGS                                              NUMBER                     
    C1                                                 VARCHAR2(90)               
    C2                                                 VARCHAR2(90)               
    C3                                                 VARCHAR2(90)               
    C4                                                 VARCHAR2(90)               
    C5                                                 VARCHAR2(90)               
    N1                                                 NUMBER                     
    N2                                                 NUMBER                     
    N3                                                 NUMBER                     
    N4                                                 NUMBER                     
    N5                                                 NUMBER                     
    N6                                                 NUMBER                     
    N7                                                 NUMBER                     
    N8                                                 NUMBER                     
    N9                                                 NUMBER                     
    N10                                                NUMBER                     
    N11                                                NUMBER                     
    N12                                                NUMBER                     
    D1                                                 DATE                       
    R1                                                 RAW(32)                    
    R2                                                 RAW(32)                    
    CH1                                                VARCHAR2(3000)Regards
    Gokhan Atil

  • Step by step 11g manual upgrade notes at metalink

    any body know # of this notes?

    10.2.0.X.0 TO 11.1.0.6.0
    1. Install 11.1.0.6.0 software
    The software can be downloaded from the following link : http://www.oracle.com/technology/software/products/database/index.html
    Note 169706.1 : Oracle® Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
    2. Upgrade the database to 11.1.0.6.0
    Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
    Note 429825.1 : Complete Checklist for Manual Upgrades to 11gR1
    REFERENCE:
    Availability and Known issues for 11.1.0.6 Note 454506.1
    10.2.0.X.0 TO 11.1.0.7.0
    1. Install 11.1.0.6.0 software
    The software can be downloaded from the following link :
    http://www.oracle.com/technology/software/products/database/index.html
    Note 169706.1 : Oracle® Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
    2. Install the 11.1.0.7.0 patchset on top of the 11.1.0.6.0 ORACLE_HOME
    Patchset number is : 6890831
    http://updates.oracle.com/download/6890831.html
    3. Upgrade the database to 11.1.0.7.0
    Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
    Note 429825.1 Complete Checklist for Manual Upgrades to 11gR1
    REFERENCE:
    Availability and Known issues for 11.1.0.7 Note 738538.1
    I hope you finished your search here..

  • P$BH P$BUFFCACHE invalid after upgrade

    Hi,
    I've just upgraded 9.2.0.5 to 10.2.0.3
    The server is a HP-UX B.11.11 U 9000/800
    I followed all the steps in the metalink doc 316889.1 (Complete Checklist for Manuale Upgrades to 10gR2)
    At the end of the upgrades - after having run 'utlrp.sql' - I have a couple of objects invalid:
    P$BH VIEW SYS
    P$BUFFCACHE PACKAGE BODY SYS
    I couldn't find any info about this problem.
    Any help?
    Thanks, Max

    Have you tried running utlrp again?
    Have you tried a manual compile of these two objects?
    If they don't compile what is the reason?

  • After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox works

    After upgrading to Mac OS Lion, even after installing Java manually, some web pages don't download and appear blank whereas Firefox and Opera work. Can someone help?

    Might be a third party Safari addon that was compatible with Snow Leopard but not Lion that's preventing pages to load. That add on may not have any effect on the other browsers, just Safari.
    Read here  >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    Also, if you have Little Snitch or Peer Guardian or anti virus sofware installed on your Mac, that might prevent pages to load also.

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • Components are invalid after the execution of utlrp.sql

    Hi All,
            I have migrated one database from the version 10.2.0.4 to 10.2.0.5, After the execution of upgrade script all components are found as valid, and then I executed utlrp.sql and at the end of this execution some of the components became Invalid. Please find the details below and Can anyone help me on this?
    I have used RMAN for migration and started the database by using startup upgrade.
    SOURCE:
    OS : Linux 2.6.18-92.el5
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    TARGET:
    OS :Linux  2.6.18-274.el5
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    PL/SQL Release 10.2.0.5.0 - Production
    CORE    10.2.0.5.0      Production
    TNS for Linux: Version 10.2.0.5.0 - Production
    NLSRTL Version 10.2.0.5.0 - Production
    Regards,
    Jai

    Hi All,
           I have resolved this issue after the re installation of  Spatial component
    Thanks

  • Oracle 10g OLAP to 11g OLAP upgrade ?

    We currently are planning on a upgrade from 10g OLAP => 11g OLAP. We currently have 12 AWM's in 10g OLAP which we need to move over with associated DML programs and additional SQL reporting views.
    Questions:
    1. Is there any documentation available on necessary steps for 10g OLAP => 11g OLAP upgrade?
    2. What would happen to existing AWM's prepared in 10g, would they be migrated to 11g transparently or have to be re-created?
    3. Is there any specific documentation related to changes in way cube builds are done programatically?
    4. Any changes in the way limit maps work in 11g?
    Please advise.
    Thanks,
    Sudip

    Migrating a 10g cube to 11g depends on whether you are talking about 11gR1 or 11gR2. 10g cubes continue to operate in the "10g way" even after a database upgrade. They will not become "11g cubes" until they are rebuilt after the database upgrade. In 11gR2, there is a supported way to migrate 10g cubes to 11g cubes, both with AWM and with PL/SQL. Sorry to say... this functionality doesn't exist in 11gR1: you'll have to rebuild your cubes from the ground up.
    The SQL relational views built using the AWM plugin in 10g are no longer applicable in 11g. That's because OLAP cubes in 11g are registered in the oracle data dictionary (just like other Oracle objects), and the SQL relational views are managed in the database and a recognized part of the product. The SQL relational views are quite different in 11g, so you will likely have to rewrite queries against them.
    LIMIT map syntax is the same, but performance is much better.
    See if this blog entry helps:
    http://www.rittmanmead.com/2009/10/09/olap-10gr2-and-dense-looping/
    Edited by: Stewart Bryson on Feb 19, 2010 8:40 AM

  • Object Invalidation in Oracle 11g R2

    Hi All,
    I found a distinct behaviour in oracle 11gR2 which is not even available in previous releases . Let me explain with an example.
    --creating a small table
    create table TEMPSAMPLE (COL1 VARCHAR2(10),COL2 VARCHAR2(10),COL3 VARCHAR2(15),COL4 VARCHAR2(15));
    -- Now Creating an Primary key index for table TEMPSAMPLE
    ALTER TABLE TEMPSAMPLE ADD CONSTRAINT PKTEMPSAMPLE PRIMARY KEY (COL1,COL2);
    ---CREATING A VIEW ON THE ABOVE TABLE
    CREATE OR REPLACE VIEW VWTEMPSAMPLE AS
    SELECT * FROM TEMPSAMPLE;
    -- CREATING A PACKAGE WHICH USES TEMPSAMPLE AND VWTEMPSAMPLE OBJECTS.
    CREATE OR REPLACE PACKAGE PKGSAMP AS
    VAL1 TEMPSAMPLE.COL1%TYPE;
    VAL2 CONSTANT TEMPSAMPLE.COL1%TYPE:='11';
    PROCEDURE VERIFYSAMP(INVAL IN NUMBER);
    END PKGSAMP;
    CREATE OR REPLACE PACKAGE BODY PKGSAMP IS
    PROCEDURE VERIFYSAMP(INVAL IN NUMBER)
    AS
    VAL1 TEMPSAMPLE.COL1%TYPE;
    VAL2 CONSTANT TEMPSAMPLE.COL1%TYPE:='11';
    BEGIN
    VAL1:='RAVI';
    FOR RC IN (SELECT * FROM VWTEMPSAMPLE)
    LOOP
    DBMS_OUTPUT.PUT_LINE('COL1 '||RC.COL1);
    DBMS_OUTPUT.PUT_LINE('COL2 '||RC.COL2);
    DBMS_OUTPUT.PUT_LINE('COL3 '||RC.COL3);
    END LOOP;
    INSERT INTO TEMPSAMPLE VALUES('REC05','RAVI','EEE','CK');
    DELETE FROM TEMPSAMPLE WHERE COL1='RECO1';
    UPDATE TEMPSAMPLE SET COL4='CKR' WHERE COL1='RECO2';
    DBMS_OUTPUT.PUT_LINE('VALUE IS '||INVAL);
    DBMS_OUTPUT.PUT_LINE('VALUE IS '||VAL1);
    END VERIFYSAMP;
    END PKGSAMP;
    --CREATING A PACKAGE PKGSAMP2 WHICH USES TEMPSAMPLE TABLE ITSELF
    CREATE OR REPLACE PACKAGE PKGSAMP2 AS
    VAL1 TEMPSAMPLE.COL1%TYPE;
    VAL2 CONSTANT TEMPSAMPLE.COL1%TYPE:='11';
    PROCEDURE VERIFYSAMP(INVAL IN NUMBER);
    END PKGSAMP2;
    CREATE OR REPLACE PACKAGE BODY PKGSAMP2 IS
    PROCEDURE VERIFYSAMP(INVAL IN NUMBER)
    AS
    VAL1 TEMPSAMPLE.COL1%TYPE;
    VAL2 CONSTANT TEMPSAMPLE.COL1%TYPE:='11';
    BEGIN
    VAL1:='RAVI';
    FOR RC IN (SELECT * FROM TEMPSAMPLE)
    LOOP
    DBMS_OUTPUT.PUT_LINE('COL1 '||RC.COL1);
    DBMS_OUTPUT.PUT_LINE('COL2 '||RC.COL2);
    DBMS_OUTPUT.PUT_LINE('COL3 '||RC.COL3);
    END LOOP;
    INSERT INTO TEMPSAMPLE VALUES('REC05','RAVI','EEE','CK');
    DELETE FROM TEMPSAMPLE WHERE COL1='RECO1';
    UPDATE TEMPSAMPLE SET COL4='CKR' WHERE COL1='RECO2';
    DBMS_OUTPUT.PUT_LINE('VALUE IS '||INVAL);
    DBMS_OUTPUT.PUT_LINE('VALUE IS '||VAL1);
    END VERIFYSAMP;
    END PKGSAMP2;
    -- OBJECT STATUS OF PACKAGES
    SELECT OBJECT_NAME,OBJECT_TYPE,STATUS FROM USER_OBJECTS WHERE OBJECT_NAME IN ('PKGSAMP','PKGSAMP2','VWTEMPSAMPLE');
    OBJECT_NAME   OBJECT_TYPE  STATUS*
    VWTEMPSAMPLE     VIEW     VALID
    PKGSAMP2     PACKAGE BODY     VALID
    PKGSAMP2     PACKAGE     VALID
    PKGSAMP     PACKAGE BODY     VALID
    PKGSAMP     PACKAGE     VALID
    Alter table TEMPSAMPLE DISABLE constraint PKTEMPSAMPLE KEEP INDEX;
    DROP INDEX PKTEMPSAMPLE;
    --OBJECT STATUS OF PACKAGES AFTER DROPPING INDEX
    SELECT OBJECT_NAME,OBJECT_TYPE,STATUS FROM USER_OBJECTS WHERE OBJECT_NAME IN ('PKGSAMP','PKGSAMP2','VWTEMPSAMPLE');
    OBJECT_NAME   OBJECT_TYPE  STATUS*
    VWTEMPSAMPLE     VIEW     INVALID
    PKGSAMP2     PACKAGE BODY     VALID
    PKGSAMP2     PACKAGE     VALID
    PKGSAMP      PACKAGE BODY     INVALID
    PKGSAMP     PACKAGE     VALID
    Alter table TEMPSAMPLE ENABLE constraint PKTEMPSAMPLE;
    As per the above process, if we observe that drop of index on a table arel lead to invalidation of view which* depends on that table  and all the objects which uses this view will also get invalidated.*
    The above invalidation is being occurred only in Oracle 11g R2, due to which we are facing the issue in our application.
    We got a procedure where we disable a constraint , drop a index and process the insertion/updation into the tables. After successfull insertion/updation, at finally we are enabling the constraint.
    This worked fine with previous releases of oracle 11g R2 , where as we recently migrated to 10g R2 which was leading to invalidation of all packages which uses the view , and in the application which uses previous db sessions are unable to access the invalidated package and raising an exception.
    Please provide the solution if any possible

    I tested the behavior in 10.2.0.4 and 11.2.0.3
    In 10.2.0.4, The view was valid if we disabled the constraint using the keep index option but it became invalid after dropping the index. SO i guess you are making them as unusable and rebuilding them after data load.
    in 11.2.0.3, The view became invalid as soon as we disabled the constraint using the keep index option.

  • Manual Upgrade from Oracle 10.2.0.4 to 11.2.0.2

    we are planning oracle DB version from oracle 10.2.0.4 to 11.2.0.2 , we are doing in AIX BOX.
    Below is steps can some one clarify if something is missing.
    1)Cold backup
    2)Start the db and change it into no archivelog mode
    3)shut db
    4)start in Upgrade mode
    5)run catupgrd.sql
    6)normal startup of DB
    7)run catuppst.sql
    Can someone help me in upgrading timezone file in the process. where to have this step fit in.?

    916610 wrote:
    Yes, we have a specific reason to do the manual upgrade due to the semantics(in char) issue in the current db. which has bugs in the 10gr2 , hence we are upgrading in manual method.Pl post a link to this issue
    DBUA does exactly what the manual upgrade does, except that it is automated. They are not different processes.
    Thanks
    Srini

  • Manual Upgrade

    Hi ,
    My database version is 9.2.0.4.0 on sun solaris with below version:
    $ uname -r
    5.10
    $ uname -a
    SunOS cidcsinfdev01 5.10 Generic_141444-09 sun4u sparc SUNW,SPARC-Enterprise
    $
    My database size is 400 gb.
    Now i want to manually upgrade my database from 9.2.0.4.0 to 10g on different sun solaris server with same version.
    So please let me know difffernet upgarade option with fulll details.
    Thanks in advance.
    Please let me know the best

    At a high level, these are the steps -
    1. Install 10gR2 software on new server, patch it up to 10.2.0.4 and apply the latest CPU patches
    2. Shut down 9i database and optionally take a full cold backup.
    3. Copy configuration and database files from old server to new server.
    4. Perform the upgrade on the new server.
    5. After verifying upgrade is successful, delete 9i ORACLE_HOME and database from old server.
    See the steps detailed here - http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/upgrade.htm#i1011600
    MOS Doc 316889.1 - Complete Checklist for Manual Upgrades to 10gR2
    HTH
    Srini

  • After 4.3.3 upgrade ipod does not shuffle songs

    After 4.3.3 upgrade ipod does not shuffle songs. The stop shuffling after any interruption occurs. So If play in the card, get a call, answer it then go back to the music, I have to manually select shuffle. This did not occur prior to the IOS update.

    WEP and Apple products are only somewhat compatible - as you are finding out. If you create your own passwords, then you have to follow specific rules - 48 bit, 5 characters, 128 bit, 14 characters. Shorter or longer, the password won't work.
    If you are stuck with WEP (I'd update the laptops with a USB wireless stick before I used WEP, but that's your decision) try the following:
    1. Use the 128 bit setting
    2. Either create a 14 character password or use WEP key 1 (that's the hex key) in place of your password on the touch.
    You could set up a second wireless access point and, as long as it used a different SSID, setup to run WPA2-AES encryption. That would take care of your modern devices.

  • Constant manual upgrades

    I was talking to a whole bunch of people offline and online and every single one of them agree on one thing, the problem is that you always need to upgrade Flash Player.
    Now for developers this is we can say okay.... but for world-wide users is not because many of them don't know do they need to upgrade and/or why.
    What I suggest as many other also do is can Flash plug-in have some kind of automatic upgrade itself, or have two choices, automatic upgrade or notify me -manual upgrade.
    Automatic means automatic user doesn't have to do anything it upgrades itsels automatically (similar to FireFox Mozilla Add-ons).
    Manual means, Flash sends a notification New version is available would you like to upgrade now?
    And perhaps have something like check every 2 weeks for new upgrade - like many other software has such feature.
    In any case I was wondering about this for so long and I see that many of you out there also want this, so please Adobe can you make this possible ?

    mari8899 wrote:
    But look at the instructions for this upgrade, how can normal user follow those, 95% of them will just close the page and say forget about it.
    The instructions for normal users say: "Users can set the frequency of the checks or disable auto-update  notification by using the Flash  Player Settings Manager." If you follow that link you have a checkbox to enable update checking and a drop down list to select the frequency.
    As I said normal user doesn't even know it has to upgrade now and then, they simply install it first time and never come back again.
    Normal users get a warning within 30 days after a new update being released.

  • 11g Agent Upgrade

    Does anyone know were the basic install instruction for upgrading to 11g agent from 10.2.0.5.
    I can only find mass upgrades using GRid Control. I do not want this.
    I want to manual upgrade 1 simple agent . Where are the install instructions ?
    Thanks.

    hi,
    Perhaps you are looking for this
    http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/upgrade_agent_usng_consle.htm#CHDHADDH
    Following the main documentation page link
    http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/toc.htm
    Salman

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Error code 36 (problems with external hard drive)

    I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive.  I cannot create new folders and when I hit command N I get error code 36.  I also cannot move files from one folder to the next.  When I tr

  • Inter Company -Error in Post Goods Issue

    Dear Experts, I have developed new intercompany process between selling company & supplying company to customer. I have created sales order and delivery order. After delivery, am able to to PGI. If i check the Post goods issue document number account

  • Cannot see ACR 5.3 update in the Camera Profiles on CS4

    I'm using CS4 on Windows Vista 64. I have tried the manual installation process multiple times before and after re installing CS4. I've tried the AUM with no results good or bad. I know there are two Camera Raw.8bi files that have to be installed in

  • On ebay i can't send question to sellers.have norton virus program wind.7

    I have win.7, norton virus program..norton 360.firefox browser i installed about 2 mo.ago.i use ebay a lot.i can do everything on it except,down at the bottom of the page is a ASK A QUESTION of the seller.the only hitch is when you have to type a num

  • How can I transfer playlists from Windows 7 to Windows 8 on the same computer?

    Windows 7 and a new Windows 8 OS are each on a seperate SSD, and all mp3 and m4a files are on a third. Can I transfer/sync playlists from iTunes 11 on Windows 7 to iTunes 11 on Windows 8?  If so, can one OS update the others changes?