[CATS] Add 'from' and 'to' hour in Week view

Hi,
I would like to add the 2 columns with begin hour and end hour (as in the Day view) in the Week view.
Is this possible to do it with customizing only?
If not, where should I modify the WD Java to do so?
Thanks in advance for your help.
Best regards,
Guillaume

Hi,
A closely related alternative would be for the employee to input his/her times in hours/minutes instead of floats.
That is to say, he/she would enter '03:55' instead of '3,9176'.
Where should I act on the Web Dynpro side to switch the numeric field to some 'time' field (even if I use char and make necessary convertions by myself) ?
Update 10-Oct-2009
I changed the CL_XSS_CAT_1_APPLICATION_CORE~GET_QUAN_OR_AMOUNT_ROLLNAME so as to return a custom ZCATSCELL with my own conversion routine instead of the standard CATSCELL but it seems to cause conversion errors whenever the input is wrong (not numeric for instance)
Update 10-Oct-2009 (bis)
Actually, just found out that the standard conversion routine CATSC is not used. Its name is simply checked (hard-coded) in the CL_XSS_CAT_INPUT_CONVERTER~CONVERT_CHAR method so as to perform specific checks (not the one in the CONVERSION_EXIT_CATSC_INPUT, don't fall into that one !)...
Thanks in advance for your help.
Best regards,
Guillaume
Edited by: Guillaume Garcia on Oct 9, 2009 3:47 PM

Similar Messages

I cal day and end hours in week view

I just installed Tiger and am having trouble getting the hours that I want (7 a.m. to 8 p.m.) to only show in my week view. I followed the iCal help and set it up under preferences, yet is shows the day starting and ending at midnight. Help?

Mark, welcome to the discussions. This feature of iCal is misleading - and not particularly useful. No matter what you set in the preferences there will still be 24 hours in the day, and all will be visible (though you can control how many are simultaneously displayed. Your 7am to 8pm setting controls which part of the display iCal lightly shade, and which part it leaves unshaded.

Is it possible to have clock in and clock out in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

Prevent calendar from showing early morning hours on week view?

I really don't need to see 1AM - 8AM on the week view of my calendar. I went in the settings and tried to say that my day starts at 8AM, but it still shows me the early morning hours. How can I change this?
Thanks!

polishedstaple,
As depicted in this example, that choice only changes the shading of the calendar background for the specified timeframe.
It will not hide the excluded times from being displayed.
;~)

Hours in weekly view

I know theres an easy answr to this but i cant find it. I read the help topic on this but didnt help..
In my wekly view each day starts at 12am and ends at the time when i put depending on my preferences for total hours showed...i want to view each day starting at 6am but when i change to that in preferences nothing happens, still shows from 12 am till whenever..

In iCal's general preferences you can set "day starts at" and "day ends at" but setting eg starts at 9am doesn't stop the hours before that being displayed, it sets the shading on the hours before 9am slightly darker. On my screen you can barely see the difference. In week view it is only the currently seleceted day that has the shading.
AK

Too many hours in week view

Before updating to OSx 10.4.4, you could choose the "Day starts at:" and "Day ends at:" preference to limit the amount of hours in the main iCal window in week view. Now changing that preference only grays out the unwanted hours. They are still there and I have to scroll though them. I only want to 8 hours in the day and the rest to disappear. That is the way iCal used to work.
Has anybody come up with a patch to solve this problem? I guess the new version of iCal (I now have v2.0.3) got installed with OSx 10.4.4. Is there any way to run the previous version of iCal with .4?

comment out the lines in /etc/fstab, since you use udev, dbus, hal and pmount i'm guessing you dont need those static entries in fstab.

ESS Working Time - Start Time and End Time in Weekly View

Hello,
I'm having a problem with the business package ESS - functionality Working Time (cat2).
I need that information to Start Time and End Time appear in the Weekly View of the portal.
In Daily View that information are already visible, but In Weekly View that information does not appear.
Does anyone have any suggestions?
Thank you very much your attention.
Att,
Jair de Oliveira Junior

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

Is it possible to have Clock in and clock out times in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Siddharth,
can you please elaborate this
Thanks
Bala Duvvuri

Creating multi rows in Weekly view for same Att type

Hi All,
This is how we can reproduce the problem
1.Enter working hours against same att type for different dates in the same row in Weekly view of record working time.
2.Go to daily view and come back to weekly view.
3.It creates different rows for the att type for the above dates entered instead of single row
Please let me know the solution
Thanks
Bala Duvvuri

Siddharth,
Even I got the same response for the OSS message from SAP.is it due to incompatibility ?
My portal version is EP7.0 SP17
ESS 600 SP13
EA-HR 603 level 0010
SAP_HR 600 level 0036
Thanks
Bala Duvvuri

Clicking on Year view to get Week view in iCal

In the Lion version, is there any way I can double click a date and get to the 'week view' rather than the 'day view'?

CaptainStarwars,
Try using (⌘+C) and then (⌘+V). That action retains the event in the original, while also placing a duplicate in the new location.
If you want to remove the event from the original time, use (⌘+X), then (⌘+V) in the new time frame.
;~)

Unable to see days in Week view.

I open my iCal, and switch over to Week view, but the days of the week don't display on the top. My brother's Mac and friends display the days.
I have tried to reinstall iCal, and also removed the plist file and rebooted, and days still don't show up. Everything looks good in Day and Month views.
Any ideas or hints about what to do to get the days to display while in Week view?
Thanks in advance for your responses!

barns,
Apple Discussions is just a user-to-user forum. You should not expect any response from an Apple employee.
Also, check your settings in:
System Preferences...>International>Formats>Dates>Customize.
There will be a Show: field which has Short/Medium/Long/Full. I am not sure which one fills iCal. Change them one at a time and experiment with individual settings.
As you can see the International Preference has additional time settings in:
System Preferences...>International>Formats>Times>Customize.
I am not using Leopard, so I am not certain about the exact configuration of that preference pane.
;~)

Show times in printed week view

Hey everyone!
I am a student at a universty in Belgium, Europe and I always print my weekly schedules with iCal. For I always print my schedule in a 5-days week view, the printed schedule doesn't show any start nor end times. But since my lessons start and end at rather odd times (like 10.25AM or 12.35PM), it's rather hard to deduct these exact times from the printed sheet. So I always print my schedule twice; once in list view for the exact times, and once in week view for a better view on the gaps between my lessons, which is rather unpractical.
Is there any way to show the start and end times in week view when I print it?
Greets and thanks in advance,
Gert Milis.

Never use "Timezone support"; Settings/MailContactsCalendars/Calendars.
When the settings are correct in the event, and not corresponding in the display:
Do a "reset": hold the Power Button and the Home Button at the same time, keep holding, when you see the white apple logo appear, let go and let the 5s start.

Major iCal disfunction. Weekly view doesnt load up at all.

I see iCal in the tool bar but but the program doesnt load when i click it in the dock. I try to open it from the tool bar and i dont get weekly view at all. Daily and monthly views come up but they are obviously seriously disabled and non funtioning. Basically MY ENTIRE ICAL HAS BECOME CORRUPTED. I tried reloading OSX. Any suggestions would sure help.

Hi,
If you are not seeing the weekly view, it is probable that your iCal preference file is corrupted.
In your user's Library > Preferences find a file called com.apple.iCal.plist and move this to the Trash and restart iCal.
Post back if this does not fix your problem.
Best wishes
John M

Week view not viewable

My iCal works fine when I select day or month view, but when I select week view the window disapears. It's not hiding off the screen somewhere as expose doesn't bring it in, but I can still view info about events and even print the week view. I just can't see it.
Help please?

Hi Jeremy,
Welcome to Apple Discussions.
Try deleting iCal's preference file.
To do this, quit iCal. In Finder go to Home/Library/Preferences. Move the file here called com.apple.ical.plist to the Trash. Re-start iCal.
If this doesn't solve the problem post back.
Best wishes
John M

Still missing a weekly view on iPhone....

...why is it so complicated?
I am using my iPhone calendar also to arrange appointments and just missing a weekly view. What is the reason for this simply function not delivered?

This is what I did:
- (void)viewDidLoad {
[super viewDidLoad];
[NSThread detachNewThreadSelector:@selector(updaterThread) toTarget:self withObject:nil];
- (void)updaterThread {
while(YES) {
NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init];
[self performSelectorOnMainThread:@selector(updateCounters) withObject:nil waitUntilDone:NO];
[NSThread sleepForTimeInterval:0.1];
[pool release];
In updateCounters I do what I used to do in the timer.
/ Magnus

[CATS] Add 'from' and 'to' hour in Week view

Similar Messages

Maybe you are looking for