CATS for Service Providers

Dear Experts,
We would be using CATS for Service Providers. I have assigned the S User IDs to the personnel Nos.
Please let me know on which web site do we log on to post our attendance / Time sheet?
Regards
Bindumadhav
9869028264

thanks for your reply.
But I still can't understand how. You are saying that from CATS_DA I can check my report, althought I want for output the calculation from each employee assigned by WBS (rate versus days)...and from CATS_DA, I only have the employee and their time attendance. right?
What do I have to do to make that possible? To make WBS/employees "generate values"?
thanks,
P.

Similar Messages

IPv6 Multicast support for service providers 6PE / 6VPE

Hi,
Can anyone comment on the current state of development for IPv6 Multicast support for Service Providers who are using 6PE or 6VPE in their MPLS core.
(6PE - SP is running MPLS in its IPv4 core, it uses IPv6-enabled provider edge (PE) routers to transport IPv6 traffic over an IPv4-only enabled core. 6PE does not support VPN,s it just provides a mechanism for tunneling IPv6 packets from ingress PE to egress PE routers)
(6VPE - refers to a PE router capable of supporting IPv6 VPNs. A 6VPE solution can be used to provide IPv6 based layer 3 VPN services in a similar way to IPv4 based Layer 3 VPN services.)
My understanding is that 6PE and 6VPE solution are unable to support IPv6 multicast traffic.
Any further information on configuration, design or development work in the pipeline would be gratefully received,
kind regards John

Hi John,
From our question I understand you are sking about the MVPN support for IPv6 multicast. It is actually supported on the XR platform as of now. Please refer:
http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.0/multicast/configuration/guide/mc40mcst.html#wp2890031
I hope this helps.
Regards,
Ruchir

Packaging files for service providers in Illustrator CS3 necessary?

Hi, i need to
package my files in Illustrator for a service provider
tonight in the same fashion one would do
in InDesign for a service provider.
But Illustrator does not have 'File->package.'
From what I can see I might go to the links palette
and use that to embed images?
But i was also told that you usually don't want to embed
Well, i'm obviously confused, anyone who can point me in the
right direction, that would much appreciated,
Thankyou.

Yeah, there's no easy way to package up the fonts unless you use Art Files or Scoop. From "Find Font..." you can then go to the finder and search for the fonts you've used. If it's only a couple, it's not too bad. Just make sure you get the right versions... (I know I have about 20 faces of Futura...)
If the service provider isn't going to be making any changes to the copy, then there is really no reason not to outline the fonts.
Outlining fonts changes them from text to shapes, treating them just like any other shape in your file, removing your ability to edit text (so it should be one of the last steps in your pre-flighting of a file) and it guarantees that what you send the printer is what you'll get back.
Keep a live (not outlined) copy of all your files for future use and send the printer an outlined version.
Or, if this is something you're going to be doing a lot of, and you don't want to outline the fonts, look into Art Files or Scoop. I know Art Files is only like $50, and it works great.

CATS for external service management

Dear,
We would like to use CATS for registering services performed. Can these services also have other units than time units (ex. confirmation on number of square meters worked on,...)? And can these services which are to be used in CATS be related to purchase orders coming from contracts (ex. contract with a supplier for digging 10m2)?
Thanks for the reply.

Hi,
please read the following SAP notes:
499722
25357
27024
691852
438718
798798
353482
Regards,
Edit

I want to save my old emails as I've run out of space on my service providers server for my email.

I want to save my old emails as I've run out of space on my service providers server for my email.
I can't Archive as that takes space alos on the server.
What is the best way to do this and still access/read the old emails on my iMac, 10.8.4?

You can just drag the emails to "On My Mac" which will save them locally. Or you can use a third-party archive utility. If you're using Mail, you might look into MailSteward which will archive all your mail, including attachments, into a database:
http://www.mailsteward.com
I've used it for years and have been quite satisfied with it.
Regards.
Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Communities. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

What is SAP for Professional Service Providers?

Hi people!
I need to know what is SAP for Professional Service Providers and for what I use it?
Thanks!

I just googled it & got the following
<a href="http://www30.sap.com/industries/professionalservices/customersuccess/index.epx">link</a>.
~Suresh

Single Router Solution for 2 Service Providers

Friends,
I have a 2951 router and 2 service providers, with no firewalls and we dont want to get firewalls, now we need to make a failover configuration for those two service providers, any suggestions please.
Thanks
Vikram

Hey Jody,
I configured my lab router with IP SLA as follows
track 1 ip sla 1 reachability
track 2 ip sla 2 reachability
ip sla 1
icmp-echo <ISP1 Ip address> source-interface GigabitEthernet0/0
threshold 3
timeout 1000
frequency 180
ip sla schedule 2 life forever start-time now
ip sla 2
icmp-echo <ISP2 ip address> source-interface GigabitEthernet0/2
frequency 180
threshold 3
timeout 1000
ip sla schedule 2 life forever start-time now
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 track 1
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/2 10 track 2
in this scenario, if i connect through console to the router, test is successfull and if i put that router in the network, and manually as soon as i say Gi0/0 shutdown, router crashes
any suggestions ?

Looking for Cisco service providers outside of USA

I am looking for Cisco service providers in Guyana.
It can be a third party vendor for Cisco partner for Cisco infrastructure maintenance.
Thanks,
Sam

Hello, xszhuMerak1.
I can help you find local Cisco support on your area. Would you be able to tell me for what Cisco infrastructure this support will be? Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

Oracle BPEL - Does not cater for not null columns and use of "default".

Oracle BPEL - Does not cater for not null columns and use of "default".
BPEL fails with message:
ORA-01400: cannot insert NULL into ("EDDB"."SEISMIC_LINES"."COORD_SYSTEM_ID")
But SQL*PLUS command works:
INSERT into EDDB.SEISMIC_LINES
(etc)
regards
Allan Ford
Analyst / Programmer - IT Application Services, IT Services, Shared Business Services
Santos Ltd
Level 4, 91 King William Street, Adelaide SA 5000
Phone: 08 8224 7944 Fax: 08 8218 5320
Email: [email protected]

note: BPEL keeps it's own "offline" copy of table and database items. A column that is marked not null in the database can be marked as nullable in this area. (if you kmow that a trigger is going to cater for this ..)
One workaround is to use a trigger to provide value rather than use the column default ..

Auto Po creation for Services from service PR

Dear friends,
I need to configure the same scenarion Auto PO for Service PR with item cat D and Account assignment K.
I have done following settings.
1) Auto PO marked in Vendor master
2)SproMMExternal Services ManagementSource Determination and Default Valuesfor Purchasing Organizations-Auto Po generation for service requitions.
3)PR created with Item cat --D and account assignment cat K with material group as input data.
no material number and service number.
4)Info record created for material group and vendor.
5)Source assigned to PR via T code ME56
now i am trying to create the Auto PO via ME59N but i am getting the message " no suitable PR found"
Please suggest the action.
Looking for your reply.
Thanks & Regards,
Vinod Kshirsagar
09420693261
Edited by: vinod kshirsagar on Jan 3, 2008 1:04 PM

Since u have assigned source of supply--only enter PR
Try to creat through me58
for me59
Check the following
vmr --auto PO tick
mmr/smr--auto PO tick
info record--tick
source of supply with fixed source..

PDP Error for only for Service Item

Hi Guys,
We are on SRM 5.5 with ECC6.0 in Classic Mode and trying to create a PO in ECC.
We are facing a unique issue. We have maintained all the required settings for material as well as
services. When a material is transferred to SoCo and assigned a vendor it creats a PO in ECC. But when we are transferring service, the PO does not get created.
The error in RZ20 (backend error) shows error "Enter Material Group" although material group is present in the SC and replicated from ECC to SRM and can be seen in Comm_hierarchy
Issue is unique coz of following results.
1. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat D -
    PR sent to SRM to SOCO and create PO FAILS
2. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat "Blank" -
    PR sent to SRM to SOCO and create PO SUCCESS
3. SRM SHC - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat D -
    PR sent to SRM to SOCO and create PO SUCCESS
Hence for the same set of data the Material PR creates a PO but Not Service. Also for the same service data the SRM SHC also creates a PO.
Only the PDP service PR fails. Any views why? is there any specific settings for Service in PDP?
We have replicated the masters and groups properly.
Thanks & Regards

Hi Experts,
I have noticed the following difference when the ext req for Material (which creates PO) and Service (which fails) are compared in BBP PD
1. The field EXT_DEM_POSID (External Requirement Tracking Number) in Table BBP_PDIGP for service shows the value as 000100000000010 whereas for material it shows value 00010. That means the details in SOCO under follow on documents tab shows external requirement number for service as xxxxxxxxx/1000000 (probably last 5 digits truncated) wheras for material it shows xxxxxxxxx/10.
Is this standard or this is an error. Can this be linked to my original issue.
2. The field BE_OBJ_ITEM in table BBP_PDBEI for the failed service PO is blank whaereas for material it takes the value 00010.
What is the importance of this field?
Apart from this I have also found a note in which corrections are delivered for SRM 550 patch level 11 which is our current patch level. That means these corrections are already present in our system. The program code says.
reference to BE purchase requistion
IF is_item-ext_demid IS NOT INITIAL AND
    is_item-ext_dem_posid IS NOT INITIAL.
    mc_assign_x ls_be_item preq_no    is_item-ext_demid.
    mc_assign_x ls_be_item preq_item is_item-ext_dem_posid(5).
when service item, remove mat_grp in extreq scenario
    because it can differ from original purch. req. item
    IF is_item-product_type = c_ptype_service.
      CLEAR ls_be_item-matl_group.
    ENDIF.
This clearly says when service item, remove mat_grp in extreq scenario and that is what our problem is. The error is basically for "Enter material Group".
Kindly let me know whats your opinion or resolution.
Thanks
Hussain

Transfer time from CATS to SERVICE entry sheet against PO No in Days

Hi All.
We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
We want to Hi All.
We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
We want to transfer time in Days to service entry for conforming service receipt.
Pl. help us how to transfer time in days to target component.
regards,
karan hon.for conforming service receipt.
Pl. help us how to transfer time in days to target component.
regards,
karan hon.

Hi,
I think maintaining suitable Data Entry Profile will solve your problem. Take help from HR consultant.
SPRO->Cross Application Component->Timesheet->Specific Settings for CATS Classic->Setup Data Entry Profiles.
Regards

BOM IN CRM Only for Service Contract

Hello
We want have a BOM explosion working in CRM for service contracts
Here are the details :
We have replicated the materials from ECC to CRM. We are not maintaining any BOMu2019s in ECC.
The idea is that we maintain the BOM Structure in CRM only, as we donu2019t want to have the Items as a billable item in a position, only for information purposes (or later on for metering)
We have maintained the product category for the header product in CRM so we are able to maintain depended components
(Relationship type SCDEC S Dependent Components (DC) )
Not we are able to assign dependent component to the header material
Item category groups:
We understand that the standard item category groups that should be used are ERLA for the header product and LUMF for the Item product.
In order to support the same functionality for the given item category group , maintained at the product level in ECC we copied the same setting for the item category group from the standard to
our settings.
Standart
Tx type     Item Cat Group          item category     structure scope
TA             ERLA                TAQ           A single level Explosion of Structured Product
TA         LUMF                TAP                   A single level Explosion of Structured Product
So we have copied TAQ to ZTAQ and TAP to ZTAP.
ZS01 is a copy of SC (service contract)
Tx type     Item Cat Group          item category     structure scope
ZS01     ZLEI                       ZTAQ          A single level Explosion of Structured Product
ZS01     LEIS                       ZTAP          A single level Explosion of Structured Product
But when we use a header product in the service contract, we cannot see the BOM is exploding.
We have also created some products in CRM with exactly the same Item Category groups as the standard and when we create a standard order (TA) in CRM, the BOM is NOT exploding.
Questions:
Is it possible to have the BOM setup only in CRM, like we try to do it?
Is it possible to use our own item category groups in CRM more is the functionality only working with ERLA and LUMF?
Is it possible to use the BOM Explosion in Service contracts as well ?
What steps are we missing to get the BOM explosion in CRM ?
Thank you for your help
Frank
Edited by: Frank Foerstner Foerstner on Dec 9, 2011 12:34 PM

Thanks Nablan, I could do that for multiple header coming in file. But I have a question for you on BAdI ALM_ME_006_GOODSMVT. I have implemented this BAdI , and this BAdI is called by a function Module ALM_MEREP_006_CREATE. When I test this FM giving the Material , Orderid and Movement type entries, this BAdI is triggered when giving a breakpoint. I've given this code for changing the movement type to 961. Cause the stanadrd scenario does not maintain Movement type 961 in Mobile Asset Management. The Movement type 961 for unplanned Materials comes to SAP and changes to 261 as maiantained by TCOKO table. To bypass this & retain the movement type 961 in SAP I'm using this BAdI. Currently this is what I'm doing and am stuck in the method interface how do I call the method.
method IF_EX_ALM_ME_006_GOODSMVT~CREATE .
break-point.
*DATA : i_ce_goodsmovement TYPE REFERENCE
          ALM_ME_CUSTOMER_ENHANCEMENT.
DATA : lr_badi_goods_movement TYPE REF TO if_ex_alm_me_006_goodsmvt.
DATA : ls_user_data TYPE ALM_ME_USER_DATA-USERID.
*DATA : goods_movement TYPE ALM_ME_MATERIAL_MOVEMENT.
CALL METHOD lr_badi_goods_movement->create
EXPORTING
       ce_goodsmovement = ce_goodsmovement
IMPORTING
       user_data        = ls_user_data
       custom_user_data = ls_ce_user_data
       goods_movement   = goods_movement
changing
       return           = return[].
CALL FUNCTION 'ALM_ME_COMMIT_OR_ROLLBACK'
       TABLES
            return = return.
endmethod.
Please help me to get the data in this method. How do I call this.

Unable to install Sun Java System MAPI Service Providers

I tried to install the outlook connector for Outlook 2003. I've got the following error message. It said that Unable to install Sun Java System MAPI Service Providers. I am using Windows 2000 SP3 platform
--- 2005/06/22 11:41 ---
11:41:26 [5365] Outlook version is 11.0.6359.0.
11:41:26 ERROR: [5501] Unable to find MAPI directory.
11:41:26 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:26 [5475] TMP directory is 'C:\DOCUME~1\admin\LOCALS~1\Temp'.
11:41:28 [5362] Checking Windows version.
11:41:28 [5363] Windows version is 5.0.
11:41:28 [5364] Checking Outlook version.
11:41:28 [5509] Checking default mail client.
11:41:28 [5508] Default mail client is 'Microsoft Outlook'.
11:41:28 [5178] Verifying that Outlook is not running.
11:41:28 [5179] Trying to login to shared session.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:29 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:31 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
11:41:31 ERROR: Unable to install Sun Java System MAPI Service Providers.
Anyone can help for this? Thanks

I have used this method, but the dog gone service does not return a started status. It just keeps saying starting even after the service starts.
Download sc.exe from ftp://ftp.microsoft.com/reskit/win2000/sc.zip and copy
it to system32
Open a command line, change to C:\Sun\AppServer\lib and run:
C:\winnt\system32\sc.exe create SJdomain1 binPath=
"C:\Sun\AppServer\lib\appservService.exe
\"C:\Sun\AppServer\bin\asadmin-pause.bat start-domain domain1\"
\"C:\Sun\AppServer\bin\asadmin-pause.bat stop-domain domain1\"" start= auto
DisplayName= "SunJava domain1"
1. I'm no fan of windows and I prefer Solaris or Linux
2. Windows should have this tool as a part of the OS so I don't have to go hunt for it
3. I guess this solution is better than no solution at all :)

No Inoice Varification for Service Purchase Order

I want Service entrries to be generated for service purchase order but I don,t want Invoice Varification (MIRO) for that Purchase Order or Service Entry.
Pl let us know how can I configure this.
regards,
Sanjay

Hi,
Not sure, why there is such a business requirement...
However, standard SAP has not provided any such facility for Item cat (D) service, any possibility to suppress IR. You may try creating an account assignment cateogry ( Copy ofr K - Cost Cneter) and deselect Invoice Receipt checkbox in the config of new account assignment category. Assign the new a/c assignment category to Item Category D.
Regards

CATS for Service Providers

Similar Messages

Maybe you are looking for