CATS in distributed system
Hi Gurus,
CATS and HR are in two a different systems. CATS is only being used for PM/CS confirmations and capturing IT 2002 attendances. Absences are not being captured through CATS.
The data is being sent from CATS to the HR system through ALE/idocs.
My problem is when I am entering time in CATS the system is not checking against the absences record in the HR system.
Ideally it should not allow me to enter time on a day when I have a leave record against that day.
How should i ensure that it does a check against IT2001 absences in the HR system ?
Regards
Adithya
hi
option 1 . Replicate the HR master data in may be a days interval from one system to other where the cats is implemented with all the infotypes.
Option 2. write a RFC to read infotype 2001 from the other system where HR data exists to validate in the cats sheet.
Regards
sameer
Similar Messages
-
Error in Central Instance installation ERP 2005 Distributed System
Hi All,
I am currently trying to install Central Instance for ABAP Distributed system on AIX.
During the installation I encounter this error message:
WARNING 2006-09-20 14:22:39
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2006-09-20 14:22:39
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS-ABAP/CI/FormalPasswordCheck.log.
ERROR 2006-09-20 14:22:39
FSL-04008 Unable to access application bin/java. A file or directory in the path name does not exist.
Before the installation SAPINST_JRE_HOME and JAVA_HOME variables were set to /usr/java14.
Please help.
Thanks,
ChieHi Chie,
definately wrong
the output should be similar to this one:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (SAP 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
note the "64 bit" and "SAP" in there...
You can download it here:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=javasap
Regards,
Pascal
PS: please give points for helpful answers -
How to use DB13 on a distribute system
HI,
We install SAP R3 enterprise 4.7 SR1 as distribute system on 3 different windows 2003 server, Central Instance , Database Instance and Dialog Instance. As I understood, we need to use sm59 to setup the RFC destination so that DB13 can work well.
So I manually create a RFC destination SAPXPG_DBDEST_DB01 and only test successfully after I install a new dialog instance on database server and connect to this dialog instance. I tried to create SAPOSCOL_DB01 with the folow parame
Connect Type : T
Activition Type: Explicit
Program: saposcol
target: db01 ( db01 could be resolved to IP address and ping well)
but the test is unsucessful.
when I run db13 to backup, it looks the brbackup run on the central instance not on the database instance.
Any one can help to handle this problem or give me some notes about a distribute system RFC setting?
Your kindly help will be appreciated!
Regardsthere is not any relation of saposcol program to database backup. as per my understanding, this program is used to collect the data, for database backup from DB13 program sapxpg should be called, so check the SM59 that the connection of this program is working properly or not.
Sap Note : 446172
Regards
Subhash
Edited by: Subhash Chandra on Dec 11, 2008 2:56 PM -
Error in Export of ABAP+JAVA Distributed system
Hi
I am exporting an ABAP(ECC 6.0)+JAVA Add-in system .
I have started the database instance export from the database instance host .
I am geting the following error :
An error occurred while processing service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > MS SQL Server > Source System Export > Distributed System > Based on AS ABAP and AS Java > Database Instance Export( Last error reported by the step :uncaught exception: nw.usageTypes.utlError: Execution of UTL tool 'D:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\ERS\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
sdsapdbsbx1/sapmnt/ERS/SYS/global/security/lib/tools;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/ERS/SYS/global/sltools/sharedlib/SLUtil.jar;D:/usr/sap/ERS/SYS/exe/nuc/NTAMD64/mssjdbc/sqljdbc.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/usages_data.xml" -log=UTL_load_usages.log -sid=ERS -dsn=jdbc/pool/ERS -ssprops=D:/usr/sap/ERS/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/ERS/SYS/global/security/data/SecStore.key' aborts with return code 1. Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/UTL.java.log' for more information. (in script unknown, line 0: ???)).
The file UTL.java.log is as follows:
java version "1.4.2_19-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_19-rev-b07)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_19-rev-b07, mixed mode)
java.lang.NoClassDefFoundError: com/sap/engine/offline/OfflineToolStart
Please help.
Regards
RatnajitHi
with 1.4.2_18 and 1.4.2_19 we are currently having massive stack overflow check the below link for more clarifications
X64 java 1.4.2_18 for SAP
Regards
Uday -
Adapter Engine has wrong hostname after HSC with Distributed System
I have an interesting situation where I have performed a homogeneous system copy from a standard system to a distributed system. The only that really has changed is the database server name. I performed the global host install, the database instance import, and then the Primary Application Server install.
The strange error is that the adapter engine after the install shows the hostname of the database server. The SLD CIM Instance data shows the hostname of the database server as an adapter engine. The correct hostname for the adapter engine is there also, but is not updated by the SLD Data Supplier/or RZ70 update.
The SLD entries for the ABAP and Java stacks are never updated after this copy.
I'm pretty much stumped on this one. I think I picked the correct options for the install.Hi,
you said that you have done homogenous system refresh. As a check please follow the below note and let me know if it is helpful.
SAP Note 1286149 - Configuration Wizard: PI Self Test for NetWeaver
Also Please go through the doc regarding post installation steps for PI
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e]
Please let me know the result.
Regards,
Venkata S Pagolu -
What is the limitations of J2EE as a distributed system
Merry Christmas!!!
What is the limitations of J2EE as a distributed system
For example,
Once we use J2ee as a solution to the E-commerce,
What is the limitations of J2EE compared with .NET?imagination
-
DB 13 error in distributed system (brconnect)
hi expert,
I installed distributed system .
DB instance is Unix (hp) and Central instance is NT.
I install standalone gateway in DB host for DB13 and then configured TCP/IP detination SAPXPG_DBDEST_<DBhost> .
I checked SAPXPG_DBDEST_<DBhost> connection is OK.
but check db error in DB13
=================================================================
Job started
Step 001 started (program RSDBAJOB, variant &0000000000020, user ID ADMIN)
No application server found on database host - rsh/gateway will be used
Execute logical command BRCONNECT On host stwdbdev
Parameters: -u / -jid CHECK20100624162600 -c -f check
BR0801I BRCONNECT 7.10 (19)
BR0152E Environment variable ORACLE_SID is not set
BR0806I End of BRCONNECT processing: cedngqgn.log2010-06-24 16.26.01
BR0280I BRCONNECT time stamp: 2010-06-24 16.26.01
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
==================================================================
previous this error, `brconnect not found error` is corrected by copy br* kernels to gateway kerenl directory.
I thought brconnect is started by gateway`s <sid>adm user so I gave environment value "ORACLE_SID,ORACLE_HOME,SAPDATA_HOME" to gateway`s <sid>adm .
but error is same.
finally, I want to know who execute brconnect in DB instance and how can I correct this problem.
thanks and regards
junhi,
I log on SAPServicePID but db13 error is same
===========================================
Job started
Step 001 started (program RSDBAJOB, variant &0000000000024, user ID ADMIN)
No application server found on database host - rsh/gateway will be used
Execute logical command BRCONNECT On host stwdbdev
Parameters: -u / -jid CHECK20100625125243 -c -f check
BR0801I BRCONNECT 7.10 (19)
BR0152E Environment variable ORACLE_SID is not set
BR0806I End of BRCONNECT processing: cednkvdj.log2010-06-25 12.52.43
BR0280I BRCONNECT time stamp: 2010-06-25 12.52.43
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
===============================================
and SAPServicePID environment variant
==============================================
C:\Documents and Settings\SAPServiceDPI>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\SAPServiceDPI\Application Data
CLIENTNAME=MYCOM
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=STWDMDDEV
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\SAPServiceDPI
LOGONSERVER=
STWDMDDEV
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=/oracle/DPI/102_64
ORACLE_SID=DPI
OS=Windows_NT
Path=C:\Program Files (x86)\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\
WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft Network Monitor 3\;C
:\Admin\bin;C:\Program Files\OmniBack\bin\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 26 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1a05
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPDATA_HOME=/oracle/DPI
SAP_DIR_PERF=D:\usr\sap\PRFCLOG
SESSIONNAME=RDP-Tcp#24
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME1\SAPSER2\LOCALS~1\Temp\1
TMP=C:\DOCUME1\SAPSER2\LOCALS~1\Temp\1
USERDOMAIN=STWDMDDEV
USERNAME=SAPServiceDPI
USERPROFILE=C:\Documents and Settings\SAPServiceDPI
windir=C:\WINDOWS
==========================================================================
brconnect working is sure by SAPServiceSID??
why error is still??
regards
jun -
About HR payroll posting FI in the distributed systems
Hi All,
I have a question about HR payroll post FI in the distributed system(both are Ecc6.0). There are difference In configuration between Ecc6.0 and lower version(like 4.70, 46C) ?
Best regards,
Sap leanerHi,
Please see all the difference in service.sap.com
Hope this helps,
Reward points if helpful,
Thank You, -
I need help about distributed systems
Dear guys...
I search for answer about these question but not found the answer ,please help me?
1.What are the main objective and key issues of distributed systems address by Java EE and who can benefit from this system compared to other systems?
2. what is about Java EE based on distributed system evaluation criteria such as transparencies, reliability, security, performance and etc. I need summary?oh .
-
Installation ERP 6.0 EHP4 on a distributed system
Hello,
We are in process of the ERP 6.0 EHP4 installation (abap only) on a distributed system. The database is already installed (MaxDB). After that we installed the ERP6 EHP4 from the DVD ERP 6.0 EHP4 READY. After the installation was successfully done, we found out that the EHP4 was not installed, just the ERP 6.0 (600). So why the sapinst did not ask us where he can find the EHP4 packages?
If we tried the installation with sapinst as a central system (host and db on same server) it asks about the installation export of the EHP4. So thats a little bit strange..
Any ideas?Hi,
When you install ERP 6.0 EHP4 system then first EHP4 Ready system will be installed in which all netweaver base components like SAP_Basis, SAP_ABA etc. will be on 7.01 release and all ERP components will be on 600 release. And this system is called as EHP4 Ready system. After that you have to upgrade your EHP4 Ready System to EHP4 level.
This restriction applies because when you will upgrade EHP4 Ready system then you can upgrade only those Technical Usage which you want to use on the system instead of upgrading all components. So, When you will upgrade your EHP4 Ready system , then you have to download packages & stack xml file from MOPZ in solution manager. In MOPZ you have to select Central Components which is mandatory and it contains SAP_APPL and EA-APPL package, once it will be upgraded to 604 level then your system will be EHP4 system. If apart from Central Application technical usage, you want to install any other Technical usage then you can select them in MOPZ and can upgrade in one go.
For more information, check Technical FAQ and How to install eHP4 document on http://service.sap.com/erp-ehp.
Thanks
Sunny -
Homogeneous Copy / Converting Distributed System as Central System.
CURRENT SAP LANDSCAPE.
SAP Production System is installed as a Distributed System:
SAP Application Host:_ AIX 5.2 - SAP Application (Central Instance - Central Services) based on NW 7.0 - ERP 2005 SR1.
Database Host: AIX 5.2 - Oracle 10G ver 10.2.0.2.0. - Database remains in SAN (Storage Area Network)
ESCENARIO ONE:
COPYING ONLY CENTRAL INSTANCE AND CENTRAL SERVICES TO A NEW HOST.
Purpose: I want to copy only SAP Application (Central Instance an Central Services) to a new host and connect to my current Database Host .
According System Copy Guide (*) the concept of System Copy includes installation of SAP instances again using copy of source system database, likewise in this Guide I found the following restrictions:
Restrictions.
1. Copying the database only is not supported!
2. Copying the central instance only is not supported!
The migration controller deletes all dialog instances in the database, so the
system is not complete any longer.
3. Reinstalling the central instance without the database is not supported!
The migration controller deletes all dialog instances in the database, so the
system is not complete anylonger
Questions:
1. Using Homogeneus Copy (Abap+Java) can I copy ONLY SAP Instances (Central Instance and Central Services) to a new host without copying Database ?
2. Which is the best procedure to follow for this purpose?
(*) System Copy for SAP Systems Based on SAP NetWeaver 2004s SR1 ABAP+Java
Document version: 1.1 ‒ 08/18/2006
ESCENARIO TWO:
CONVERTING DISTRIBUTED SYSTEM IN CENTRAL SYSTEM
Purpose: Convert our SAP Distributed System (two hosts) in SAP Central System (one host)
Questions:
1. Using Homogeneous Copy (Abap+Java) can I copy SAP Instances (Central Instance, Central Services) and Oracle Database Instance to only one host (Central System) ?
2. Is there any specific experience or procedure for this special case?
3. Can I restore Database Full Offline Backup and SAP Application Offline backup in the new server as an alternative ?
Thanks.Use the distributed system option, as that is what applies to your target system. It is all explained clearly in the system copy guide, which you should definitely reference as appropriate for your software version: http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP NetWeaver -> SAP NetWeaver 7.4 (or version as appropriate) -> Installation -> 2 - Installation - SAP NetWeaver Systems -> System Copy: Systems Based on SAP NetWeaver 7.1 or Higher -> Windows: ABAP (or system variant as appropriate). In the guide, choose the Database-Specific System Copy: MS SQL Server-Specific Procedure. Also, be sure to check out the chapter on Copying the Database Only - Refresh. Basically, it says to run SWPM on the target database instance, choosing <Product> -> <Database> -> System Copy -> Target System -> <System_Variant> -> Based on AS ABAP (or other as appropriate) -> Database Refresh or Move.
-
CRIO Doesn't Show Up In The Distributed Systems Manager
All,
Any idea why my cRIO wouldn't show up in the distributed systems manager? I'm running Real Time 3.2.1 and I've already deployed my shared variables. I can see the cRIO through MAX and with my project just fine.
- KenHi Ken,
I have a couple of questions/things we can try:
1. How are you connected to the cRIO? (Crossover, switch, router with DHCP)
2. Are you able to manually add the cRIO by IP Address to My Systems? (Right-click My systems, select Add Systems..., type in the IP Address and select OK.)
3. Are the shared variables hosted on the cRIO? If not, do you see the Shared Variables in the Distributed System Manager?
4. Try enabling CPU Load Monitoring through the cRIO Target Properties in the LabVIEW Project (Right-click cRIO, select Properties, go to Miscellaneous and check Enable CPU Load Monitoring, deploy the settings and reboot the cRIO).
5. If you already had Distributed System Manager, does pressing F5 to refresh help?
Finally, I would like to know what version of Distributed System Manager/LabVIEW you are using. -
Credit Management in Distributed Systems
Hi All,
Could you please explain what triggers outbound DEBMAS idoc from central FI system to Sales System.?
We are about to implement Credit Management in our distributed systems.
I would like to know, how frequently credit limit data is sent from Central FI system to Sales System. What triggers these outbound Idocs generation? How customer masters to be sent is determined.?
Thanks in advance.
Regards,
Ravi KumarHi All,
Could anyone please advice.?
Thanks,
Ravi Kumar -
Sorting files for distributed systems for Documaker
Hello,
I've been asked to research tools that will assist with fast sorting of files for the distributed systems for Documaker. Unfortunately, I have not had any exposure to Documaker so I'm starting from scratch. Anyone have any experience with this?
Thanks in advance,
RonEasy enough!
BCH files can be sorted by any number of means depending on what you would like to do and when you want to do it, and the complexity of your sorting requirements. Documaker includes some rudimentary sorting capabilities, but since there are so many other options available this is not something we have focused on as a desired feature. You can browse the system doc for more details on that. Otherwise... if you're running in multistep mode then you have access to the BCH file, in which case you can sort it using whatever is appropriate to your OS: MVS folks have syncsort, Linux folks have just about anything from perl to sort, Windows folks have a sort command as well. It so happens that those items I've mentioned are all solutions I've used for customers. If you're running single-step, then you won't likely have the BCH file available to use, and will have to write a custom rule in your CUSLIB for Documaker to sort. In this case, you would have to have access to a sorting application that provides an API. I've used Opt-Tech Sort for customers in the past, and it's definitely both affordable and powerful (and multiplatform).
NA and POL files generally do not require sorting and I would highly recommend that you steer clear of messing with those files unless you have a darn good reason to do so. Primarily you don't need to sort them because the print output is controlled by the BCH file so if you reorder the BCH, the print reflects that order. The NA file contains the variable data, and the POL file contains the forms and sections and recipients for the transactions.
Printstream sorting is an entirely different animal. I haven't been too involved with printstream sorting because it is both 3rd party and happens outside the Documaker realm, but I can tell you that most customers use facilities provided by their print controller (depending on the type of printer) or they use tools like StreamWeaver (in fact that's probably the best one IMO).
Hope this helps!
Andy
Edited by: Andy Little on May 20, 2010 12:09 PM -
I have to make a projet for distributed systems. what are the advatages of using java over other technologies.
well, here are a few -
* Enjoy "Write once, run anywhere" flexibility
* Develop robust applications for multiple devices
and check these links -
http://www.acm.org/chapters/bombay/news/articles/19981001.html
http://java.sun.com/java2/whatis/
Maybe you are looking for
-
Help with Line of Best Fit equation!
Alright, I'm making a graphing program where the user can input up to 10 coordinates (all ints) and when they click draw, the points will be graphed on a cartesian plain and the program will calculate and draw the line of best fit... including displa
-
Edit Page link is not appearing in Portal???
Hi All, I created a Web Page, custom layout and published in WPC and created a role & folder for that web page in PCD. I am able to see the role and the web page in Portal but "Edit Page" link is not appearing in portal. I am the owner of the page.
-
My mailbox is full. How do I delete messages. I have a 2008 Mac Book Pro., My mailbox is full. How do I delete messages. I have a 2008 Mac Book Pro.
-
Where are customized element lists stored ?
Hi all, After removing lots of useless DITA elements from my Elements list via the Customized List option, I find that the list is only used for the document in which I have edited it, and is not kept when I close and reopen the DITA file. In the FM1
-
I have used Paint Shop Pro for many years, but now that I have an Apple Macbook Pro, I have CS4 installed, and am trying to learn Photoshop. I have an image of a man and I want to erase everything except the body of the man, and leave the background