CATS Report- PS integration.

Hi @ll,
Is there any standard report in SAP that brings out the actuals entered in CAT2. We have integrated CATS with Project System and I have entered the actuals in CAT2. Then I have transferred the data to PS thru CAT5.
Pl let me know which report will retrieve the data and show.
Rgds.
Venkat

Try CN48N and/or CATS_DA as well.
Arya

Similar Messages

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2013 and SQL Reporting Services Integration Mode

I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013.
I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Services and it's started, I've also created the Services Application without any issues (And linked it
to my web application). However the Report Server Integration feature is missing from my site collection and so are the content types. I even tried creating a new site collection and no dice.
Appreciating any help.
Best,
MI

Hi MI,
As per my understanding, I think this issue is caused by you haven’t install the Reporting Services add-in for SharePoint Products or is not installed correctly. If we install the Reporting Services add-in for SharePoint Products after the installation of
the SharePoint Server, then the Report Server integration feature and the Power View integration feature will can be activated for root site collections. For other site collections, we can manually activate the features. To fix the issue you occurred, we should
install or reinstall the Reporting Services add-in for SharePoint Products.
For more information about Install Reporting Services 2012 SharePoint Mode for SharePoint 2013, please see the following article:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Reporting services integration feature not available in 2010 experience mode site collection.

I have a 2013 SP farm with SQL reporting services 2012 configured. When I create a site collection using the 2010 experience mode, I don't see the "Reporting Services Integration" feature under site collection features. However this feature is
available when I create a site collection in 2013 experience mode. Is there a way I can activate the "Reporting Services integration" feature in a site created in 2010 experience mode? I am not able to activate the feature on a 2010 experience mode
site collection using PowerShell either.

Hi，
From your description, When you create a site collection using the 2010 experience mode, the "Reporting Services Integration" feature is missed. However this feature is available when you create a site collection in 2013 experience mode.
For your issue, whether your 2010 experience mode site collection is in the same web application with the 2013 mode site collection. if not, make sure the web application which contains the 2010 site collecction have been
enabled ssrs service,
Go to CA->Application Management->Manage web applications-Choose the web application->Click Service Connections->Check SSRS, refer to the screenshot:
Besides, I suggest you create a new 2010 mode site collection with the same tempalte and the same web application with 2013 mode site collection, compare the results.
Also you can upgrade you 2010 mode site collection to the 2013 mode and compare the results.
Hope it helps.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New CATS report

-- Posted also under HR Forum -
Hi
In CATS, transaction KS02 (change cost center), one can see two fields, person responsible and user responsible.
In a CATS report i need to search on the person responsible so that all cost centers (and attributed hours for those cost centers) are then displayed.
So here are the questions:
1) Can one use the two fields (one or both) in KS02 to get the desired effect of showing the data in the report;
2) Is such a report already available in CATS?
Thanx
RM

NOT RELEVANT ANYMORE

Report Server Integration Feature is missing

Report Server Integration Feature is missing in site collection feature lists, so, i cannot activate it to get the SQL Server Reporting Services Content Types. No sure if it is related with a recent PU and CU patching.
checked http://msdn.microsoft.com/en-us/library/bb677366.aspx ;
finally, fixed by running a repair installation of sql server 2012 rs add-in for sharepoint.

Work for me by navigating to the "1033_enu_lp / x64 / setup" under the SQL Server 2012 SP1 (not the "SQL Server 2012 SP1" installation, but the update only pack), then execute rssharepoint and Repair. The first execution it failed (setup
rolled back), a re-execution fixed the problem.

Active "Report Service Integration Feature" failed

Hi Expert,
I tried to reactive the "Report Service Integration Feature" from "Deactivate", but failed. system show
The content type with Id 0x010100C3676CDFA2F24E1D949A8BF2B06F6B8B defined in feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0} was found in the current site collection or in a subsite.
Please let me know how to fix it.
James Liang

One thing you could try is (re)installing the SSRS 2014 addin on your SharePoint server(s).
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Report service Integration vs Report Service SharePointMode

Hi,
I see some msdn docs using the terms "RS Integrated mode" while some other msdn docs use the terms "RS SharePoint Mode".
Are those the same thing?
I guess it is just diferent terminology used with diferent produtcs versions RS2008/SP2010 & RS2012/SP2013.
Am I wright or are there other considerations?
Note: I'm not considering the RS Native mode Webparts .

Hi,
Per my knowledge, the
SQL Server Reporting Services Integration Mode is SQL Server Reporting Services SharePoint Integration Mode.
http://www.optimusbi.com/2012/11/23/ssrs-integrated-vs-native-mode/
As this question is more relate to SQL Server, I suggest you post it to SQL Server Forum, you will get more help and confirmed answers from there.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices
Best Regards
Dennis Guo
TechNet Community Support

CATS report to get the details of the PS transfer

Hello All,
I have integrated the SAP PS with CATS and I want to know which all reports i can use to confirm the PS transfer is successful.
As soon as the CAT5 is run and time is transferred i want a report for the confirmations of the transfer is successful.
I am trying to use the CJI3 but that report is not clear because it does not give the informations on the hours transferred, and
many times i get no line items to be selected.
Why i get no line items selected when i pass the project ID in CJI3. ??
Regards,
Lohith

Hi Amit,
I have checked that transaction and its not much useful as it gives only status update till Approved,
it will not give info on transferred to PS or not.
Thank you,
Lohith

HELP! Confusing problem in report-form integration!

Hi all, I have a problem in integrating report in dev10i. I used to use Dev6i and have no problem in using run_report_object in 6i.
I got the REP-0503 You did not specify the name of the report and FRM-40738 Argument 1 to builtin Report_Object_Status can not be null. The report run OK in report builder and I create the paper only layout. Also, I save the report as *.rdf and create a report object in form that point to this *.rdf file.
This is my PL/SQL code:
PROCEDURE P_PRINT_REPORT_OBJ(vc_reportoj Varchar2, vc_reportserver Varchar2, vc_runformat Varchar2) IS
v_report_id                    Report_Object;
vc_ReportServerJob               VARCHAR2(100);
vc_rep_status                    VARCHAR2(100);
vjob_id                         VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, 'aplikasi_id='||:APLIKASI_BBM_INDUSTRI.APLIKASI_ID||' paramform=no');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
     WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
ELSE
     message('Report failed with error message '||vc_rep_status);
END IF;
END;
What gives? Do I miss something here? Also what is the name of report server in Dev10i? I am under impression that this is not needed so I put blank '' when I call this procedure in WHEN-BUTTON-PRESSED trigger like this:
P_PRINT_REPORT_OBJ('myreportobj','','HTML');

Hello Colin
Please check note 170167. Maybe error comes from a very large form which has many selection conditions.
In that case you will have to reduce the size and complexity of your form.
Regards
Javier

Help with BI Report iView integration!

Hello,
I have been provided with a BI 7.0 Report URL (http://<BI FQDN>:8000/sap/bw/BEx?cmd=ldoc&infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>&sap-language=EN) that i need to integrate into Portal as an iView. I have created BI System in the Portal System Landscape by entering following Parameters:
Connector Properties:
Logical System Name: <BI LS Name>
SAP Client: 100
SAP System ID (SID): B01
SAP System Number: 00
System Type: SAP_BW
User Management Properties:
Logon Method: UIDPW
User Mapping Type: admin, user
Web Application Server (Web AS) Properties:
Web AS Description: BI Web AS
Web AS Host Name: <BI FQDN>:8000
Web AS Path: /sap/bw/Bex
Web AS Protocol: http
After this i gave an alias SAP_BW for this system and then did the User Mapping for this system with my user account. Now i from PCD i am creating a New iView of type "SAP BW Report iView" and entered following parameters:
Application Verison: 7.x
Application Parameter: SAP_BW
BEx Web Application Query String: infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>
Then when i do a PREVIEW test i get following message:
Service cannot be reached
What has happened?
URL http://<BI FQDN>:8000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher call was terminated because the corresponding service is not available.
Note
The termination occurred in system B01 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapb01_B01_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
If i execute the same query from Query Designer then also i get a error screen with an invalid URL in the address bar and a message in the body saying "The Page Cannot be Displayed". The URL that is pointed from Query Designer is:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<SUPPLIED QUERY>&VARIABLE_SCREEN=X&DUMMY=7
The same report gets perfectly executed from BI System. Can anyone please tell me why am i getting these error messages and how do i resolve? Please advice. Thanks.

Hi Vasu ,
I think you have a problem is due to BI-JAVA . Please check the links in below.
BI Java
Displaying BW3.x Objects on Portal 6.0 SP9 after upgrade to NW2004s BI
what exactly is in "BI java" ?
Regards,

BI Publisher report - Dashboard Integration Issue

Hi,
I have a problem when trying to display a Publisher Report at Analytics Dashboard.
I'm working in OBIEE 11g. I like integrate the BI publisher to show the result set on Analysis (Answers), so, I used presentation variables to send the dashboard prompts values.
The problem is that sometimes, when I select a value in the prompt, display "loading" process, but never displayed the data. (I noticed that the browser above shows an error related to a javascript - something like Expected ')' URI: <server>/xmlpserver/js/xdo_viewer_dreamscape)
Thanks
Dag.

Dag,
I would first ensure that you can pass the parameters correctly without using a presentation variable. Just make sure it works with the basics.
Also ensure that you are integrating the parameter passing correctly. Follow this guide to ensure your passing of parameters is taking place correctly,
http://www.biconsultinggroup.com/oraclebiblog/2009/7/3/bi-publisher-and-obiee-integration-with-dashboards-prompts.html
That should work.
Let me know.
Cheers,
Christian
http://www.artofbi.com

CATS report RCATSP01: Problem with statement IMPORT FROM MEMORY ID.

Hi Guys,
I am trying to create a Z custom report using SAP template RCATSP01. In template report there is an IMPORT statement as below.
IMPORT icatsd
catsfields
fieldtab
FROM MEMORY ID 'LR2'.
When I run the report in debug mode, I found there is no data in ICATSD, CATSFIELDS & FIELDSTAB.
What should I do to get the data in these internal tables.
Thanks,
Mini

I don't think this report is meant to be used as a stand-alone report; it's called within CATS time entry (e.g. CAT2 when user select print time sheet) which would export the info to 'LR2' memory prior to calling this report.

Reporting Service Integration mode and Key not valid for use in specified state

I had to uninstall SharePoint Foundation 2013 and reinstall it.
What I have done:
I uninstalled SharePoint and after that I removed all databases.
I reinstalled SharePoint Foundation 2013 and it completed without errors.
Everything else is working, except SSRS in Sharepoint Integrated Mode.
If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
"Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
"Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
It seems that "Encryption Keys" cause this problem.
https://support.microsoft.com/kb/955757
https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
"Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
I don't have any reporting server databases, because I removed all
databases when I uninstalled SharePoint. Also I don't have Encryption
Keys backups.
I have found several similar question but no answer, example here:
https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
Any ideas how I can fix this problem?

Hi,
From the Reporting Server Configuration Manager you have to restore the encryption key.
Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
If the issue still exists, Please check ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint Reporting Services Integration - System Settings Page Issue

Hi All,
A client of mine has setup Reporting Services (SQL Server 2012 SP1) integration on a SharePoint 2010 environment and this has been working fine for a while now. This includes viewing SSRS reports and also creating PowerView reports from the SharePoint interface.
The only issue that we have is when we browse to the SQL Reporting Services service application via SharePoint Central Administration and select 'System Settings' we receive an error and can't configure any of the settings located on this page.
Looking at the ULS logs I can see the following error is raised:
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.InitStrings() at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs
e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
43aaadcd-fc67-420e-a30f-2e174f151084
I removed the existing service application and uninstalled the SharePoint Services (using Install-SPRSService). I then reconfigured the RS services and created a new service application but the error is still raised. All other pages under the service application
can be loaded. We also tried setting the reporting services diagnostic logs to verbose but couldn't see any further information.
Has anybody seen this before? I'm thinking that perhaps some of the configuration settings for this page actually carry a null value when it should be configured with something. Does anybody know where these settings are saved?
Cheers,
Tom

Just thought I'd provide an update, we ended up resolving this, problem was related to an incorrect ID one one of the fields in ReportingServicesSystemSettings.aspx.
Updating this to the correct ID resolved the issue. Weird thing was that the file was incorrect on more than one server, only had to obviously update it on the CA server though. After this the System Settings page opened without any problems.

CATS Report- PS integration.

Similar Messages

Maybe you are looking for