CATS: Transfer CATS - HR

Hallo.
I need som help with this problem.
When a user has made a entry in CAT2, and saved. The user gets this message in Business Workplace. (the reason is that another user in the HR department is making a change, on this employee 1019, ausingen tcode PA30.
My question is, can i turn off this email funktion somewhere????
CATS: Transfer CATS -> HR
Dear employee,
Number of successfully retrieved data records:     1
Number of successful postings                :     0
Number of unsuccessful postings              :     1
Error messages                               :
1019 Record from 09.04.2008 with subtype FER could not be posted
1019 Person is already being processed by user Helene-Therese Darré
Best regards
Helene

I don't think that it's a good idea to turn of the warning.
Don't you think it's important that a user knows that his data was not saved?

Similar Messages

  • Problem's in data transfer  to target components in SAP PS - CATS

    Hi all
    I am trying to transfer data from CATS to PS and CO for month end closing .
    I have checked the budget in planned/actual/assigned report, and the
    WBS has sufficient budget.
    T-code used is CATA, and we are using a varient, and while transfering the data
    we are mentioning the cost center instead of employee number.
    The following message is displayed which is show in the attachement.
    Can  any body please let me know solution for this.
    What is difference between "Budget exceeded" and "Budget almost exhausted" ?
    How to check the error in the document ?

    "What is difference between "Budget exceeded" and "Budget almost exhausted" ?"
    The tolerance limits have been configured in such a way that when the budget reaches a certain percentage system will pop errors as you are seeing. For e.g. In your case the system might be issuing the message "Budget Exceeded" when 100% of the defined budget is reached. Similarly, system is issuing  the message "Budget almost exhausted" when 90% of the defined budget is reached. Budget almost exhausted message will still allow you to go ahead with the transfer provided you first correct the error in the document.
    "How to check the error in the document ?"
    Try to double click on the error message. That should take you to the details of the error.
    Why are you using the cost center instead of the Personnel number in order to transfer the hours? General practice is to use the personnel number.
    Check tcodes CN30,  COFC and see if you can get to the details of the error.

  • CATS report to get the details of the PS transfer

    Hello All,
    I have integrated the SAP PS with CATS and I want to know which all reports i can use to confirm the PS transfer is successful.
    As soon as the CAT5 is run and time is transferred i want  a report for the confirmations of the transfer is successful.
    I am trying to use the CJI3 but that report is not clear because it does not give the informations on the hours transferred, and
    many times i get no line items to be selected.
    Why i get no line items selected when i pass the project ID in CJI3. ??
    Regards,
    Lohith

    Hi Amit,
    I have checked that transaction and its not much useful as it gives only status update till Approved,
    it will not give info on transferred to PS or not.
    Thank you,
    Lohith

  • Transfer time from CATS to SERVICE entry sheet against PO No in Days

    Hi All.
    We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
    We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
    We want to Hi All.
    We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
    We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
    We want to transfer time in Days to service entry for conforming service receipt.
    Pl. help us how to transfer time in days to target component.
    regards,
    karan hon.for conforming service receipt.
    Pl. help us how to transfer time in days to target component.
    regards,
    karan hon.

    Hi,
    I think maintaining suitable Data Entry Profile will solve your problem. Take help from HR consultant.
    SPRO->Cross Application Component->Timesheet->Specific Settings for CATS Classic->Setup Data Entry Profiles.
    Regards

  • Transfer of hours from CATS to HR

    Hi.
    One of my customers has set up a transferral of hours from CATS to HR (IT2001 and IT2002) with help of trx CATA.
    The process includes approval of hours via CATS_APPR_LITE which slows everything down considerable. In the time gap between recording of hours, and approval of hours, WBS-elements are closed. This causes error messages in program RCATSTAL (trx CATA).
    Does any of you have any suggestions of how to make the process smoother?
    I've been thinking of direct transfer to HR - either from CATS or from CATS_APPR_LITE. If the direct transfer is triggered from CATS, how can the hours then be approved?
    Thank you in advance!
    Odd

    Hi,
    You can do one thing than. Use SAP standard task for approval process.
    For more details refer the below links:-
    1. http://help.sap.com/erp2005_ehp_05/helpdata/EN/64/4003fb470211d189720000e8322d00/content.htm
    2. http://help.sap.com/erp2005_ehp_05/helpdata/EN/3e/697b423737dc54e10000000a155106/content.htm
    Thanks & Regards, Swapnil Mishra
    Hi again, Swapnil.
    Thank you for your effort in helping me solve this. One way of speeding up the approval process would be to transfer given A/A codes without approval, and only have some A/A-codes through the apporval process.
    As I can see from your refered links, hours HAS to be approved (status 30) before they can be transfered to HR.

  • DBM - Time Management - CATS Transfer to CO

    Hello DBM Gurus,
    we are trying to set up Time Management  in our DBM implementation (6.04).
    the DBM transactions work and create timestamps in CATS as expected but, we seem to have a problem with the integration between CATS an CO. The entries in cats do not create CO transactions in the internal order of DBM order (no entries created in table CATSCO).
    We have followed all the instructions we could find. this is still not enough.
    Are there any specific steps rellevant to this problem (transfer from CATS to CO) that we might have missed?
    Do you know any Cookbook or helpful help on this issue?
    thanks in advance,
    Daniel Gamss

    You can refer this link for details process of interface data from HR and CO,PS,MM ...
    [http://www.****************/showthread.php?t=11938]
    Normally after book in timesheet from CAT2 ->Data will be save in CATSDB table,
    after approves data will exist in CATSCO , CATSPS, CATSMM and then we use CAT5 to interface data from HR to PS, CAT7 to interface frm HR to CO ...
    For you case no data exist in CATSCO ->check data already approves or not

  • What are the  TCu2019s in CATS to transfer data.

    Hi Experts,
    What are the  TCu2019s in CATS to transfer data. Pls replyimmediately.
    Swastik

    CAT2  -  Time Sheet (Initial Screen)
    CAT3 - Time Sheet (Initial Screen)
    CAT4 u2013 Time Sheet:Approve Time
    CAT5 u2013 Transfer to Project System
    CAT6 u2013 Transfer Time Data to HR Time Management
    CAT7 u2013 Transfer to Controlling
    CAT8 u2013 Tme Shet Documents & Follow on Documents
    CAT9 u2013 Transfer to Plant Maintenance

  • CATS - Transfer program

    In CATS( Cross application time sheet) can we have same sender and receiver cost center ..If so will an transfer program that is RCATSTAL will error out this or will it get posted.
    Thanks

    Hello,
    In fact, on CAT6 there will be no problems, because the following fields:
    -> CATSD-SKOSTL - Sender CC
    -> CATSD-RKOSTL - Receiver CC
    Will only be transferred to CO, which means by using the T-code CAT7.
    Regards,
    Bentow.

  • CATS transfer - Indirect Recharge

    I'm trying to make a single CATS entry that includes the fields below, in order to records cost against the cost center of the work center, and the maintenance work order (at different rates - purchased services rate, activity type rate).
    The fields (with their technical field name) that are used are as follows:
    Send.order - SEBELN
    Item - SEBELP
    Activity Number - LSTNR
    Rec. CCtr - RKOSTL
    Send. CCtr - SKOSTL
    ActTyp - LSTAR
    Rec. Order - RAUFNR
    Activity - VORNR
    Can anyone try a CATS transaction using all of these fields, and let me know if it is possible after the transfer process (CATM & CAT9) and acceptance of service entry sheet (ML81N), the costs show up on both the receiving cost center (at the rate specified in the activity number) and the receiving work order (at the rate specified in the activity type)?

    SAP does not allow the two receivers (Cost Center and PM Order) to be costed in an effort to prevent double-costing. The system deliberately removes the Activity Type field from the entry in the CATSPM table in order to achieve this (records can be transferred to PM Module and confirmation created, but it does not have a real cost because activity type is missing).
    We had to make an enhancement which looks up the Activity Type from the record in CATSDB to be used in the CAT9 transfer to PM Module.

  • CATS - Data Transfer to Target Components via CATA - Error "No Data for Trf

    Hello
    I am recording hours via CAT2 on Network Activity. These hours are then approved.
    However, when I run CATA to transfer the hours to CO and PS, I get popup information "No Data for Transfer".
    When i proceed further , i get another popup saying all records were read and saved successfully, and no. of confirmations generated.
    However, when i run CJI3, I do not see any Actual cost line items.
    Please help
    JG

    Hello Joy,
    (1) Perhaps you have on your profile on CAC1, the "Immediate Transfer to HR" flag set.
    This way you have the "Release on Saving" flag set, all the time you save data, it gets transferred directly.
    (2) But, I see that you are having the issue with the CO and PS, so I highly suggest you to check on if the data is on the interface tables.
      a. First you should make sure that the data exists on CATSDB with Status 30.
      b. Then, you should check the data on CATSPS (Interface table for PS) and CATSCO( interface table for CO).
      c. If you don't have the data on these tables there should be no record after all to transfer.
    Regards,
    Bentow.

  • Not Transfer CATS Cost to PM

    Hi,
    Is it possible to only transfer Hours from CATS to PM but not the cost?
    Any suggestion on configiguration, user exit to achieve this.
    Thanks

    Are you doing CATS for contractors and IW41 for employees and did not want to capture the cost for contractors in CATS ??
    If this is the case, you can set up two different activity types one with zero value and other one with needed value corresponding to two different workcenters. In the operation, you can change the workcenter to allow the right acitvity type.
    So if you use, IW41, then the activity type which has the value in KP26 will post the actual cost and if it is CATS, then it directs to ZERO value activity type which cost does not flow to order.
    Hope this helps.
    Mahee

  • CATS transfer - multiple senders & receivers

    Hi,
    Can anyone let me know how to perform the following scenario in CATS:
    The business scenario requires a two step process for transferring CATS time data. The first step uses a sending purchase order and purchase order item number, activity number (specifies service master record), and receiving cost center. The second step uses sending cost center with activity type, and receiving plant maintenance work order.
    The reason for needing both steps is that the rates for the two steps are different. In the first step, the costs which go to the receiving cost center are at the rate specified in the activity number (service master record). In the second step, the costs which go to the receiving work order are at the rate specified in the activity type (activity type planning).
    I would like to put all of these fields into one line entry in the time sheet, but when I do this, only the CATM transfer to materials management works. The costs do not transfer to the plant maintenance work order.
    Is there any way to do this using standard SAP functionality?
    Thanks,
    Steve

    The fields (with their technical field name) that we want to use are as follows:
    Send.order - SEBELN
    Item - SEBELP
    Activity Number - LSTNR
    Rec. CCtr - RKOSTL
    Send. CCtr - SKOSTL
    ActTyp - LSTAR
    Rec. Order - RAUFNR
    Activity - VORNR
    Can anyone try a CATS transaction using all of these fields, and let me know if after the transfer process (CATM & CAT9) and acceptance of service entry sheet (ML81N), the costs show up on both the receiving cost center (at the rate specified in the activity number) and the receiving work order (at the rate specified in the activity type)?

  • PR workflow kick off again when CATA -Time transfer was done by Accounting

    Hi,
    PR workflow kick-off again when accounting ran tcode -CATA(Time transfer ).This PR was approved converted into PO .When account ran CATA the workflow kick off again .I deleted the workitem through tcode -SWWL still the PR shows Release Possilble.Any body has faced this kind of issue .I want to delete the Release possible option for this PR
    This PR was created for service order for performimng services.
    Thanks in advance
    Nitin Amritkar

    I whould suggest you to call Apple
    http://support.apple.com/kb/HE57
    Here the Apple Support Communities is only used by normal users as you are. No Apple people to be found here.

  • CATA - No records for transfer to PS Issue

    Few postings were made in CAT2 against a 'Network - Activity'. After CATA is run, there is no CO document generated. For CO document to be generated, number range is maintained for trx RKL in KANK. I have checked CATSCO, PTEX2000 tables. there is no data posted in these tables either. I see a message "No records for transfer to PS". The data is present in CATSDB table though; with status (30 - APPROVED).
    Not even the Activity type price maintained (KP26) is being triggered / displayed in CATA.
    I have checked the below threads, but still unable to figure out what the reason for this issue is.
    http://forums.sdn.sap.com/thread.jspa?threadID=1926978
    http://forums.sdn.sap.com/thread.jspa?threadID=1849012
    Any suggestions plz.

    Refer these notes,
    Note 1246420 - Composite SAP Note : Cross Application Time Sheet Docum.
    Note 166961 - CATS:Error LR121 durng transfer in target applicatn
    Also refer the 2nd point in the Solution in this note,
    Note 555947 - PS/PM: Confirmation by CATS (Consulting note). Maybe this is the reason you are getting this error.
    Hope it helps.
    Post the error message number to analyse further.

  • Reports i can use to confirm the CATS time transfer to PS

    Hello All,
    I have integrated the SAP PS with CATS and I want to know which all reports i can use to confirm the PS transfer is successful.
    As soon as the CAT5 is run and time is transferred i want  a report for the confirmations of the transfer is successful.
    I am trying to use the CJI3 but that report is not clear because it does not give the informations on the hours transferred, and
    many times i get no line items to be selected.
    Why i get no line items selected when i pass the project ID in CJI3. ??
    Regards,
    Lohith

    Yes. Yes. Yes.
    Mylenium

Maybe you are looking for

  • 4 ipods sharing music on ONE computer GET one UP the others GO DOWN

    We run windows and have 4 ipods connected to the computer all with different log on accounts We share all our music with each other Problem when we search for a song and click on it (so we can get it in our individual itunes) seems when you log on to

  • Printing causes Office 2013 applications to crash

    We've a fresh installed Windows 8 Pro and Office 2013. Printing works correctly in every application but Office 2013. Word, Excel, Outlook - printing causes the application to crash. Any idea if this is a known issue? Regards. Peter Peter Van Keymeul

  • Can't move anything to trash!

    Hi Don't know if anyone has come across this before but I can't send anything to the trash. If I try to delete anything I get the message "Are you sure you want to delete ... This item will be deleted immediately. You can't undo this action." So I ei

  • Album View in a playlist?

    I've made a playlist with the last seven albums that I've bought, but the songs are in "List View"; no album artwork. The titles just run into another, you can't easily tell where one album starts and the other ends. iTunes gives you choices; List Vi

  • Question about brightening images and automating layers

    I've been using Photoshop CS5 for a while now but there are still a few things I'm wondering about. The first is about brightening an image without adding or reducing too much contrast at the same time.  If I increase the Brightness slider in the Bri