CATS WBS Issue - PS

Hi All,
In CAT2 transaction, if I manually create a data entry by copying the wbs element from the worklist and  save then if I  execute the program  "DPR_CATS_CPR_TRANSF" the confirmation time is reflected in the PS system.
But if I upload data through the zdevelopment (WBS element taken from the worklist ) and run the standard program the confirmation time is not reflected in the PS.
Please let me know what to be done to make the confirmation time reflect in PS???
Thanks & Regards,
Moni.

Please refer page no 125 of this link.
If yo you are using network than you data flow would be like Table CATSDB> Table CATSPS>via running report RCATSTPS to --> Table AFRU.
If you are not using network than it would be Table CATSDB>Table CATSCO>via running report RCATSTCO to -->Table COBK.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CATS/CATS.pdf
Regards
Nitin P.

Similar Messages

  • CATS WBS Issue - Cpro

    Hi All,
    In CAT2 transaction, if I manually create a data entry by copying the wbs element from the worklist and  save then if I  execute the program  "DPR_CATS_CPR_TRANSF" the confirmation time is reflected in the Cpro system.
    But if I upload data through the zdevelopment (WBS element taken from the worklist ) and run the standard program the confirmation time is not reflected in the Cpro.
    Please let me know what to be done to make the confirmation time reflect in Cpro???
    The path in Cpro is select any task goto 'Additional Fields' tab you will find Confirmation time in confirmation area.
    Thanks & Regards,
    Moni.

    Hi
    Did you cehck table CATSDB?
    Once you upload the data, check CATSDB, mostly the data is not there .
    If there is a data then run CAT5 to transfer data to SAP PS.
    If the data is not updated in CATSDB then you need to check report
    Niranjan
    Let me know if it works
    Points welcome if useful

  • CATS WBS Issue

    Hi All,
    In CAT2 transaction, if I manually create a data entry by copying the wbs element from the worklist and  save then if I  execute the program  "DPR_CATS_CPR_TRANSF" the confirmation time is reflected in the PS system.
    But if I upload data through the zdevelopment (WBS element taken from the worklist ) and run the standard program the confirmation time is not reflected in the PS.
    Please let me know what to be done to make the confirmation time reflect in PS???
    Thanks & Regards,
    Moni.

    and you have already approved the catshours with cats_apprv_lite and set through with CAT9 ?
    perhaps there is a difference in handling between those
    kind regards
    arthur
    Edited by: A. de Smidt on Apr 2, 2009 1:15 PM

  • WBS Issue

    Dear Experts,
    We have created Project PO with following taxes(VAT 5%, Excise Duty 10.3% and Freight)and simultaneously done the GRN for the same,but the issue is that when we are checking the budget in CJ33 only BasicExcise dutyFreight value is assigned but VAT amount is not reflecting in respective WBS element.
    Kindly provide me with the solution.
    Thanks
    Sonal

    hi
    check whether that GL is created as cost element.

  • CATS Message Issue

    HI Experts,,,
    I am facing following issue.
    On ESS when employee select CATS service and trying to fill 1 hours attendance type Annual Leave on not working days ( Saturday and Sunday ).
    In my case the user is trying to fill on 05.02.2011 which is Saturday
    The user  is getting following warning message ..which is correct
    u201CFirst day 05.02.2011 of attendance/absence is a day off (att./absence type 05.02.2011u201D
    But the issue is this warning message gets repeated twice as following .
    u201CFirst day 05.02.2011 of attendance/absence is a day off (att./absence type 05.02.2011u201D
    u201C First day 05.02.2011 of attendance/absence is a day off (att./absence type 05.02.2011)u201D
    I want user should get only one messageu2026
    I have performed following stuffs.
         Debug the u201CHRXSS_CAT_WD_RECORDu201D RFC but in exporting parameters u201CET_MESSAGESu201D
                         Shows two messages u2026
         I have checked the CATS profile, its perfect.
         Checked Note 1444096 - ESS LEA: Repetitive system messages while approving a leave.
    checked message class : HRTIM00REC message ID : 007
    First day &1 of attendance/absence is a day off (att./absence type &2)
    Could you please help to resolve this issue
    Regards,
    Vivek D Jadhav
    Edited by: Vivek D Jadhav on Jan 21, 2011 1:30 PM

    Hi Sid.,
    Thanks for your reply ........very helpful......
    However, the message duplication issue is occurring for one particular attendance call
    "Annual Leave (0850)" apart from this attendance the system throws only one message as expected.
    Any idea u2026.
    I have chked the configuration all are in sync....
    Furthermore u2026u2026.
    For attendance type for which system works fine for them only one message gets displayed i.e u201CFirst day 05.02.2011 of attendance/absence is a day off (att./absence type 05.02.2011)u201D,
    The system should throw following two message as well .
    1. Last day &1 of attendance/absence is a day off (att./absence type &2)
    2. Attendance/absence &1 - &2 during non-working period (att./abs.type &3)
    We have done configuration related for these messages In view u201CT554Su201D for attendance type u201C0850u201D we have configured following input checks .                                 
    First day is day off        W  ( Warning message )
    Last day is day off        W 
    Non-working period       W      
    Any idea

  • CATS Variant Issue

    All,
    We are currently trying to implement CATS.  The question I have is we are trying to restrict the timesheets creators and editors to just be able to create/edit their own timesheets.  I know there is a variant $USER but I can't find it again to mirror it.  Is there a table to view all the variables and what they are too?  Or is there a better way to restrict this to only the user? 
    Thanks!
    -Daniel

    After looking into the suggestions that were given I have came to the conclusions that a variable will probably not work due to it will populate the all the roles with that auth obj in it and we are not wanting to do that.  With that said, I was looking into all of the P_ objects that have been brought in which are P_ORGIN, P_PCLX & P_PERNER and I am not seeing where you can restrict to just a user or even a field that would ever suggest that it is possible?  Is there another auth obj that I am missing that should be there? 
    Would there possibly be another way to make it so the user that is assigned this role can only put time in for their self and no one else.  That the whole issue I think we are trying to solve before we can move forward?  If anyone has any suggestions please let me know.
    Thanks,
    -Daniel

  • CATS approval Issue

    Hi,
    We have some attendance for an employee for October 2011. One day attendance for 04/10/2011 is not appearing on IT 2002. Pulled CADO report to see the status of the attendance and it shows the status as In Process. Tried to approve the attendance using the tcode CTA6, CAPP, CAT4, but unable to approve as it is not getting listed when the tcode is executed.
    Reason for doing this approval is employee entered entered the attendance using the PORTAL but this was not transfrred to IT 2002.
    aNY ADVICE WILL BE MUCH APPRECIATED.
    tAHNKS

    Thanks the issue is now resolved. Rule was not to apply attendances in advance. As employees applied there attendances before the actual day system was throwing an error. Employee deleted the attendances booked in advance and reapplied after the actual day of attendnace. After this action all went well.

  • WBS Updates in R/3 not Key in BW

    In R3, POSID can be changed without impact to the WBS in R3, but with great impact to the WBS in BW, which understands the new POSID as a new WBS element. Only a full delete/load of both the WBS Master Data and Transaction Data into BW will keep the BW and R3 WBS records in full sync. This is not practical in the BW Production environment. Also, it would not be known when a user changes the POSID in R3, so full loads would need to be done daily to insure that all changes are captured. Again, not practical in Production.
    Although costs are often posted to Networks rather than to WBS elements, especially upper level WBS elements, “roll-up” of costs under a WBS is often a very common form of reporting in BW, especially for Project Managers. These WBS "roll-up" reports in BW would report costs on the previous POSID unless full replace of WBS Master and Transaction records were done between BW Report run times.
    Has anyone else run into this problem? One recommendation would be to change the current process with custom development. The "lowest impact" options in my opinion would be:
    Block the ability of the users to change the WBS POSID on the R3 side.
    Change the BW WBS Primary key from POSID to a concatenation of POSID/PSPNR, and create a Rule during BW WBS Extraction to check if the POSID for an existing PSPNR has changed – if yes, replace the POSID for the existing PSPNR with the new POSID name.
    Any thoughts?

    Here is a note from SAP on the WBS issue. According to Colm O'shea (SAP support) they are going to try and put a fix in the next plug-in upgrade. 
    New and extended interfaces for integrating SAP R/3, SAP R/3 Enterprise, and SAP ERP Central Component (SAP ECC) will no longer be delivered with their own add-on (SAP R/3 Plug-In).  As of SAP ECC 6.0, they will be contained directly in SAP ECC.
    PI 2004.1 is therefore the final separate delivered SAP R/3 Plug-In release.
    This means that:
    SAP ECC 6.0 and subsequent releases will automatically contain all integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components.
    Customers who run SAP R/3 4.6C, SAP R/3 Enterprise 47x100 and 47x200, and SAP ECC 5.0 will receive additional integration interfaces in a Support Package for PI 2004.1 once a year. The delivery of this Support Package will be synchronized with that of mySAP Business Suite. The 2005 delivery is in November as part of Support Package 10. Information about the delievery from 2006 onwards are take place here
    This rule applies only for customers with a SAP R/3 Plug-In release PI 2004.1. Customers with PI 2003.1 or older must first upgrade to PI 2004.1 or SAP ECC 6.0.
    No new interfaces will be provided for integration between new SAP component releases and SAP R/3 3.1I to 4.6B.
    Number              739182
    Version             2 vom 25.05.2004
    Status              Released for Customer
    Set on             ,25.05.2004
    Language            EN
    Mastersprache       DE
    Short text          PSBW: Renaming PS objects
    Responsible         SAP AG
    Component           BW-BCT-PS
                        Project System
    Long text
    Symptom
    In the project system, you can rename the following objects: project
    definition, WBS element, network and network activity. In this case,
    only the external identifier of the objects is changed. The internal
    identifier (object number and Guid) is retained.
    In the BW content of the PS, the external identifier of the objects is
    stored in the cubes.
    If the objects in the source system are now renamed, the reference of
    the transaction data already loaded for this object disappears in BW,
    since this refers to the old external identifier.
    Other terms
    PSBW, 0PS_C01, 0PS_C02, 0PS_C03, 0PS_C04
    Reason and Prerequisites
    This is due to a design problem.
    Solution
    Currently the only solution is to load master data and transaction data
    again into BW.
    You can use the following authorizations to prevent renaming of the
    external identifier in the source system (in this case, activity '45' is
    responsible for renaming the external identifier):
        o  Project definition: C_PROJ_... authorization object
        o  WBS element: C_PRPS_... authorization object

  • Cross Company Controlling Issue

    Dear Experts,
    My Client is using two controlling areas.First controlling area have 1 company code assigned on it and another have 10 company codes assigned on it. Now they want to do cross company code controlling between these 11 company codes but as the controlling areas are different then how can we cater this issue?
    Please guide.
    Regards,
    Zain Bashir

    Dear Zain
    Controlling area is just like a box limiting the management to slice and dice the data within the defined boundaries of that box. There is no cross controlling area activities possible.
    REF: http://help.sap.com/erp2005_ehp_06_hana/helpdata/en/35/26b5d3afab52b9e10000009b38f974/content.htmhttp://help.sap.com/erp2005_ehp_06_hana/helpdata/en/35/26b5d3afab52b9e10000009b38f974/content.htm

  • Yum install issue

    Hi OEL Experts,
    I am trying to install glibc.i686 on my OEL 6 x86 64bit machine, got below error:
    [root@oeltux ~]# yum install glibc.i686
    Loaded plugins: refresh-packagekit, security
    http://linuxdownload.adobe.com/linux/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 7 - "couldn't connect to host"
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: adobe-linux-x86_64. Please verify its path and try again
    Below is my OS environment:
    [root@oeltux ~]# cat /etc/issue
    Oracle Linux Server release 6.4
    Kernel \r on an \m
    [root@oeltux ~]# uname -a
    Linux oeltux.idc.oracle.com 2.6.39-300.28.1.el6uek.x86_64 #1 SMP Tue Feb 5 22:51:31 PST 2013 x86_64 x86_64 x86_64 GNU/Linux
    Your help will be really appreciated.
    Thanks,
    Tapas

    Hi,
    Fist verify your internet connection (ping any website)
    If you have dhcp server (verify the GATEWAY Address and DNS Address)
    If static configuration
    FIX IP Address in the file /etc/sysconfig/network-scripts/ifcfg-eth0   
    FIX GATEWAY Address in the file /etc/sysconfig/network
    FIX DNS Address in the file /etc/resolv.conf
         => Now verify your connection
         2. Second verify your YUM repository configuration. (it's like Dude sed)
    It seems you your YUM repository configuration is not setup properly. I suggest to check the content of /etc/yum.repos.d/. Since your hostname "oeltux.idc.oracle.com" suggest you are working at Oracle, you might rather want to get in touch with internal support. Otherwise instructions provided at http://public-yum.oracle.com/ should work too.
    and your system use the uek6.
    [root@oeltux ~]# uname -a
    Linux oeltux.idc.oracle.com 2.6.39-300.28.1.el6uek.x86_64 #1 SMP Tue Feb 5 22:51:31 PST 2013 x86_64 x86_64 x86_64 GNU/Linux
    Verify that /etc/yum.repo.d/public-yum-ol6.repo looks like:
    [ol6_UEK_latest]
    name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
    baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/
    gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
    gpgcheck=1
    enabled=1
    I hope this can help you
    Best Regards
    Message was edited by: WadhahDAOUEHI [correct word]

  • PEC in Investment Orders and WBS

    Dear Experts ;  
    Why some of investment orders and WBS issue errors of two hundered pecrcent amounts to be posted to Asset Under Constructions in period end closing ? How to solve this problems ?
    Thanks : VYN

    Plan data for Statistical wbs elements are not eligible for assesments/distributions and settlements.
    In actuals , orders can be set as senders and receivers. Use trans KCAU to customize yur assesments.
    I hope it helps.
    Pan

  • [Solved] Setting my own desktop environment

    Hi, I'm trying to setup my own desktop environment with the following packages:
    * slim
    * metacity
    * compton
    * wbar
    This is my slim conf:
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Set directory that contains the xsessions.
    # slim reads xsesion from this directory, and be able to select.
    sessiondir /usr/share/xsessions/
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Bienvenido a %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    #default_user simone
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    #focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    #auto_login no
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme archlinux-slim-theme-whitey
    # Lock file
    lockfile /var/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    Now, my desktop entry for the sessions, which is located $HOME/.config/joelDE/joelDE.desktop:
    [Desktop Entry]
    Name=joelDE
    Comment=Mi entorno de escritorio
    Exec=/home/joel/.config/joelDE/joelDE
    TryExec=/home/joel/.config/joelDE/joelDE
    Icon=/home/joel/.config/joelDE/joelDE.png
    Type=Application
    I made the symlink: ln -s /home/joel/.config/joelDE/joelDE.desktop /usr/share/xsessions/joelDE.desktop and it DOES appears in slim sessions (F1), now jolDE script:
    #!/bin/bash
    # mi propio entorno
    (sleep 1s && metacity --replace &)
    bash $HOME/.fehbg &
    xscreensaver -no-splash &
    (sleep 1s && compton --config $HOME/.config/compton.conf -b) &
    (sleep 1s && wbar) &
    and finally my .xinitrc:
    #!/bin/bash
    # ~/.xinitrc
    if [[ ! "$1" ]]; then
    WM_Name=startxfce4
    else
    WM_Name=$1
    fi
    setxkbmap -layout latam
    if [ -z "$GTK_PATH" ] ; then
    GTK_PATH="/usr/lib/gtk-2.0"
    else
    GTK_PATH="$GTK_PATH:/usr/lib/gtk-2.0"
    fi
    export GTK_PATH
    if [ -z "$GTK_MODULES" ] ; then
    GTK_MODULES="canberra-gtk-module"
    else
    GTK_MODULES="$GTK_MODULES:canberra-gtk-module"
    fi
    export GTK_MODULES
    export LANG=es_MX.UTF-8
    echo ${WM_Name} >$HOME/DE_name.txt
    if [ ${WM_Name} != "startxfce4" ]; then
    export DESKTOP_SESSION=${WM_Name}
    export GTK2_RC_FILES=$HOME/.gtkrc-2.0
    exec dbus-launch --sh-syntax --exit-with-session ${WM_Name} >$HOME/xinitrc-log.txt 2>&1
    else
    exec ${WM_Name} >$HOME/xinitrc-log.txt 2>&1
    fi
    # :~ EOF
    This is the thing: after choosing "joelDE" in slim sessions it shows a black screen and rerun slim...
    1.- Doesn't SLim run x11?
    2.- If not, how do I call it?
    Thanks!
    Last edited by Joel (2014-07-14 04:37:30)

    Try moving the metacity line in joelDE to the end of the file and remove the last '&':
    #!/bin/bash
    # mi propio entorno
    bash $HOME/.fehbg &
    xscreensaver -no-splash &
    (sleep 1s && compton --config $HOME/.config/compton.conf -b) &
    (sleep 1s && wbar) &
    sleep 1s && metacity --replace
    With startx, and I think that this is true for SLiM as well, your X session will last as long as your ~/.xinitrc (or, I think more technically, the exec $whatever that may be at the end of the file).  So if everything in ~/.xinitrc forks (or in your case, your joelDE script), that script will complete immediately, and the X session will exit with it.

  • SLiM only starts twice then exits to tty1

    Hi... i've installed arch yesterday following this guide https://wiki.archlinux.org/index.php/Beginners'_Guide i
    After that i started to set up a new desktop using openbox and slim.
    Basically everything works fine... except that after exiting openbox 2 times slim won't start and i end at tty1.
    systemctl status slim... after boot
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 10s ago
    Main PID: 241 (slim)
    CGroup: name=systemd:/system/slim.service
    └─264 /usr/bin/X -nolisten tcp vt07 -auth /var/run/slim.auth
    ‣ 241 /usr/bin/slim -nodaemon
    ... after 1st "openbox logout"
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: active (running) since Di 2013-03-19 19:05:10 CET; 1min 50s ago
    Main PID: 241 (slim)
    CGroup: name=systemd:/system/slim.service
    ...after 2nt logout on tty1
    slim.service - SLiM Simple Login Manager
    Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
    Active: failed (Result: exit-code) since Di 2013-03-19 19:07:04 CET; 23s ago
    Process: 241 ExecStart=/usr/bin/slim -nodaemon (code=exited, status=1/FAILURE)
    /var/log/slim.log
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    systemctl list-units
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys...t_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
    sys-devi...-sda-sda1.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda2.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda3.device loaded active plugged IC25N080ATMR04-0
    sys-devi...-sda-sda4.device loaded active plugged IC25N080ATMR04-0
    sys-devi...block-sda.device loaded active plugged IC25N080ATMR04-0
    sys-devi...block-sr0.device loaded active plugged _NEC_DVD+_-RW_ND-6500A
    sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.7/sound/card0
    sys-devi...et-enp0s4.device loaded active plugged /sys/devices/pci0000:00/0000:00:04.0/net/enp0s4
    sys-devi...et-wlp2s0.device loaded active plugged /sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/net/wlp2s0
    sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-subs...es-enp0s4.device loaded active plugged /sys/subsystem/net/devices/enp0s4
    sys-subs...es-wlp2s0.device loaded active plugged /sys/subsystem/net/devices/wlp2s0
    -.mount loaded active mounted /
    boot.mount loaded active mounted /boot
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-...ord-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-...ssword-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running Getty on tty1
    net-auto-wireless.service loaded active running Provides automatic netcfg wireless connection
    ntpd.service loaded active running Network Time Service
    slim.service loaded failed failed SLiM Simple Login Manager
    systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-...es-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-...-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-...sessions.service loaded active exited Permit User Sessions
    systemd-...le-setup.service loaded active exited Setup Virtual Console
    dbus.socket loaded active running D-Bus System Message Bus Socket
    dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
    lvmetad.socket loaded active listening LVM2 metadata daemon socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-...d-control.socket loaded active listening udev Control Socket
    systemd-udevd-kernel.socket loaded active running udev Kernel Socket
    dev-sda2.swap loaded active active /dev/sda2
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    network.target loaded active active Network
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    /etc/slim.conf
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    # sessions xfce4,icewm-session,wmaker,blackbox
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    # default_user simone
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    # focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    #auto_login no
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme default
    # Lock file
    lockfile /var/run/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    When i run "systemctl start slim" on tty1 slim starts again and after exiting openbox twice i'm back on tty1.
    ...But when i run "slim" on tty1 slim starts and i can exit openbox as often as i want.
    Any ideas ?
    Edit:
    Running /usr/bin/slim from tty1 gives me this logfile.
    /var/log/slim.log
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    slim: waiting for X server to shut down
    slim: waiting for X server to begin accepting connections.
    Somehow the second "slim: waiting for X server to shut down" does not happen when running "systemctl start slim"
    Last edited by Synth (2013-03-19 19:39:10)

    Ok, I was able to workaround parts of the bug:
    I changed slim.conf and and set daemon = true (so slim runs as a daemon). Furthermore changed the slim.service file for systemd:
    [Service]
    Type = forking
    PIDFile = /var/lock/slim.lock
    ExecStart=/usr/bin/slim
    Now I can log in and out as often as I want. Seems to work. However, nm-applet only shows up in odd numbers of logins:
    1st login --> nm-applet is shown
    2nd login --> nm-applet is not shown (but running --> htop)
    3rd login --> nm-applet is shown
    4th login --> nm-applet is not shown (but running --> htop)
    ...and so on...
    I search the web, it seems to be a problem with dbus and the order how the services get started. Don't know if that is true...any ideas from anyone?

  • [SOLVED] New slim, can't shutdown|reboot|suspend anymore

    Hi!
    I just upgraded slim, and i notice that i cannot suspend, shutdown and reboot anymore.
    And to mount usb drive, i am asked for my password.
    After the upgrade i changed /etc/slim.conf,pacnew to suit my needs and then sudo mv /etc/slim.conf.pacnew /etc/slim.conf .
    My .xinitrc is the same, so, where is the problem?
    here there are my slim.conf:
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    sessions xfce4,icewm-session,wmaker,blackbox
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    default_user federico
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    #focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    auto_login yes
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme default
    # Lock file
    lockfile /var/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    and my .xinitrc:
    #!/bin/bash
    export BROWSER=chromium
    export DE=xfce
    exec ck-launch-session dbus-launch startxfce4
    Thanks!
    Last edited by nierro (2012-05-08 18:42:44)

    From later in this thread:
    Solution
    Ok, do:
    ck-list-sessions
    There were two sessions for myself.  So, the new slim is starting your exec line already with a console kit session.  This is new behavior.  It didn't before.
    So, I modified my exec line to remove "ck-launch-session" in .xinitrc to:
    exec dbus-launch --exit-with-session startxfce4
    Reverted the changes I made to the shutdown/restart policy and rebooted.  Shutdown, restart, mounting USB drive: they all work again now.
    Edit: from even later on in this thread, just:
    exec startxfce4
    As your .xinitrc exec line should be sufficient for practically anyone.  "startxfce4" does the dbus-launch itself.
    Original post here:
    Changed in my /etc/slim.conf:
    default_path        /bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin
    Same issue, in Action buttons Shutdown and Restart grayed out.
    in .xinitrc, launch line:
    exec ck-launch-session startxfce4
    Launch line was:
    exec ck-launch-session dbus-launch --exit-with-session startxfce4
    But, same issue with that launch line.  Was googling and I found results saying dbus-launch is contained within startxfce4.
    Last edited by headkase (2012-05-09 02:23:48)

  • Budget Commitment Report - S_ALR_87013558

    We have an issue with the Budget Commitment Report S_ALR_8701355 as explained below.
    Org Structure:
    A* Projects are separate small Projects to track Capital and Operating Expenses
    But all the Capital Purchases are done only through C* WBS. And accordingly Capex budget is maintained only for C* WBS. So AWBS has been linked to 3 CWBS ( SW, HW & Dev SW)  in one of the user field of C*WBS.
    Shopping Cart will be raised using CWBS in SRM. But once PR has been created it replaces the account assignment field with AWBS. And later even the Asset posting happens only with A*WBS
    Issue:
    While using Budget Commitment Report - S_ALR_87013558, CWBS is giving Budget and A WBS is giving Actual cost. This Actual Cost pertains to 3 C* WBS Elements (SW, HW & Dev SW). So now Business requires to merge the cost of A* WBS with respective C*WBS Element.
    We are able ascertain the cost of AWBS but not able find a logic to distribute this cost across respective C WBS.
    Current Logic of the Program:
    Any document posted using WBS Element will update table RSPCO with just Amount, Period & Value Type (Actual/ Budget / Plan) . So Budget Commitment Report S_ALR_87013558 will fetch the details from this table alone.
    Could any of you please let us know how to deal with this problem without altering the existing Org structure .

    Hi Rajesh,
    I think the report is showing correctly as per the logic. But please elobrate us why the PR created with account assignment C* WBSE is replacing by A* WBSE.
    If the account assignment in PR and PO is replacing by A* WBSE then obviously actual cost will book against A* WBSE and report S_ALR_8701355 will display the same.
    you can post cost from AWBSE to C WBSE uisng KB15N.
    Regards,
    Nag.

Maybe you are looking for