CATS0003 or CATS0006 - how are these invoked on the portal?

Hi Folks,
How are the enhancements CATS0003 and CATS0006 invoked on the portal, is it the refresh or review button? What's the difference between them?
Thanks,
Ann

yes there should be a action performed then the exit will be called in the user interface
a refresh or review should do the trick
The call are made to CATS_EXTERNAL_INTERFACE which in turn calls
the CATS0006 customer-exit.
Actions on the Exit are captured in
HRXSS_CAT_WD_RECORD
IV_ACTION > On_review : happens when you review the timesheet
ON_RECORD_MODE_CHANGED : Happens on both occasion
of daily and weekly switch

Similar Messages

HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
Thank you all in advance

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

How are these custom links created?

On this webpage, the "rss feed" button and the "email" button cannot be dragged like a normal link can be dragged (by "drag" I mean you can't click on it and move the image around)
http://www.blog.spoongraphics.co.uk/
Also,on this webpage, there are no dotted lines around the link when you select it/click on it.
http://psd.tutsplus.com/tutorials/designing-tutorials/the-making-of-mystic/
How is this done with code? And how are these links different from regular links with the dotted lines around them?

How is this done with code?
View the source code and find out? That's how. Link to RSS feed is provided below. So look for the rss class in CSS and discover that the class contains a background image. Moral: view source code to see how it's done with code.
<li><a href="http://feeds2.feedburner.com/SpoonGraphics" class="rss">Subscribe by RSS</a></li>

Feedback, please. How are these overviews and links to resources working for you?

I've been working lately on providing concise introductory sections in After Effects Help that each give an overview of a topic, provide some related tips, and then give a bunch of useful links to more detailed information.
I'd like to get some feedback on how these sections are working.
http://blogs.adobe.com/toddkopriva/2009/09/feedback-please-how-are-these.html
If, as I hope, these overviews and collections of tips and resources are helpful, then I'll do more of this kind of thing.

Hi Todd,
Thank you for all that you have contributed to this board, and beyond. I have looked at, and used some of your resources, and found them to be very helpful. In my particular case, I learn much better through video tutorials, especially ones that include the project file and elements that are used in the tutorial. I'm glad to see you include links to other peoples work, but with your wealth of knowledge and talent, I would like to see you make your own series of video tutorials. I think you could do as good or better than anyone out there at this point. I hope you will at least give it some consideration. Thanks again for all that you do, keep up the good work.

My iPhone was overstressed and there are these lines covering the screen making it difficult to access apps

My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it should

J-dag97 wrote:
My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it should
Take it back to whomever changed the housing.

How are files uploaded to the file system?

How are files uploaded to the system? I do not see any documentation on the SAP Cloud Appliance Library regarding this.

Hi Daniel,
the majority of the appliances run the Linux operating system. You can use native scp (Linux) or winscp (Windows) to upload files to the file system.
If you google for "upload data to Linux aws instance" you should find a lot of documentation on the topic.
Best Regards,
Hannes

How we Can find out How many Users Logon into the Portal those users Names.

Hi Friends
I have one doubt in Portal,
How we can find how many Users Logon into the Portal and how we can find that users Names in Portal.
Regards
Vijay Kalluri

Hello Vijay,
If you are at all interested in a 3rd party application to make your life a bit easier getting stats on your users, you could check out Click Stream by Sweetlets.
Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to filter this information in nearly any report at the click of a button.
Click Stream also uses the PCD API to get information about the pages your users are visiting too.
In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc.
Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
Good luck.

How are these processors different?

I purchased a MacBook Air last summer and it came with this processor, 2.0GHz Intel Dual-Core Core i7, Turbo Boost up to 3.2GHz. The top speed processor of the newly announced MacBook Air has this processor, 1.7GHz Dual-Core Intel Core i7, Turbo Boost up to 3.3GHz. How are they different?
Seems the summer 2012 processor is a faster processor. Did Apple downgrade the processor in the new MacBook Air?

The new processors are a different architecture. They use significantly less power and offer something like a 40% improvement in graphics performance (this is probably the most significant improvement). There would be a nominal difference in actual CPU performance regardless of the 300MHz difference. So the new processors are actually a decent upgrade.

Itunes charts- how are these charts calculated?

how are music charts calculate?

Thanks Robert, I thought it was something like that.
On a further note, when you say 'new subscriptions', do episodes have to be fully downloaded to count?
For instance, if a user subscribes to a podcast, but for whatever reason doesn't actually finish downloading a single epsiode, would this carry the same weight as a user who subscribes and downloads five episodes of another podcast?
Further to that, do you know if users are identified from their iTunes ID, or their IP? For instance, if a three people with seperate music store accounts but on the same network were all subscribed to a podcast, would this only count once or would they each count?

How are these?

I want to get something to protect my new iPod from scratching, etc., but I hate cases where you can't actually see the iPod. Maybe that's a little silly, but I like looking at the iPod itself, and all those cases and "skins" hide the iPod. So, I found these:
http://www.handstands.com/retail/computer/bulletproof.shtml#
But I haven't seen any reviews, comments, etc. on them. Are these any good? Are there any problems with them, at all? Will they damage the iPod, in anyway, in the long run.
Windows XP

unlike reviews the invisible sheild is really that hard to put on. im only 15 and i did it just fine. also, it has a lifetime gauruntee and they replace them immediitely if they ever peel up.
watch the demo its really amazing and quite funny.
http://www.untenohana.com/archives/videos/ipodscratchtest/

HT4864 Thank you! This may sound lame but are these instructions for the blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there.

Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!

You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.

How are items stored in the iPhone?

Where are files stored on the iPhone? When I connect to my computer, where should I look? I am especially trying to find messages and vm files.
Thank you.

Message and VM (virtual memory?) files... ? Which specific applications? It sounds to me like you've become used to managing such things on an alternate platform (Android?) and now you're trying to apply the same thinking to the iPhone? It's not the same and usually not necessary to connect your phone to the computer for much of anything these days. But then again, I use my phone as it was designed and don't walk the fine line of digging into its guts.

Photoshop Elements 13 are in 32 and 64 Bit Versions,how are they distinguished on the retail CD´s

How do I know if its a 32 or 64 Bit Version when buying a CD for Installation. There are no Informations on the Package??

Hi wakud,
Kindly refer: Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 for Mac, Windows, PC - System requirements
Thanks,
Atul Saini

Subreport shows no images nor formatting when invoked from the portal

Hi,
I am not 100% sure if this is the right forum, but my problem is related to running subreports on the portal.
We run OracleAS 10gR2 (10.1.2).
I have some reports I created with the builder. They are "registered" on the Portal, i.e., I have created report access definition files.
My reports server is defined to run not only registered reports.
Actually the report access definition files do not contain the file name for the reports. I rather handle it through the ORACLE_HOME/reports/conf/cgicmd.dat and set the corresponding hidden key in the parameter form.
On the developer PCs, running the standalone OC4J instance, we have ORACLE_HOME/reports/conf/cgicmd.dat files with entries of the shape:
master: report=master_report.jsp userid=scott/tiger@mydb destype=cache %*
detail: report=detail_report.jsp userid=scott/tiger@mydb destype=cache %*
On the application server we have a SSOCONN resource scotttiger defined as an OracleDB connect string (scott/tiger@mydb), and the cgicmd.dat entries show:
master: report=master_report.jsp ssoconn=scotttiger destype=cache %*
detail: report=detail_report.jsp ssoconn=scotttiger destype=cache %*
The master_report.jsp has format triggers that will invoke srw.set_hyperlink('/reports/rwservlet?detail_report.jsp&...'), for linking to the subreport(s).
This used to work perfectly and it still works on the standalone OC4J instance.
Now, if I run the master report on the portal and navigate to the detail report, the detail report shows the right results, but neither formatting nor the images or graphs. When I do a 'show image' on the subreport, then I get a REP-50171: Authentication failed. On ther address bar, I see that the portal is invoking 'http://server:port/reports/rwservlet/getfile/HW/...'
On the reports trace file, nothing abnormal is shown. I haven't found any entry in any log and am already out of ideas.
Any hint will be appreciated.

I fixed it myself.
The reason was I had a parameter p_authid that conflicted with the portal's parameter authid.
As soon as I removed it, the problem disappeared
I personally think this is a bug in the portal.

What are Business Objects in the Portal Content of Content Administration?

Hi Friends,
Can anybody tell me what are the Business Objects, which are under _Content Administration-->Portal Content_ and How are they useful?
Thanks in advance,
Ravi

Hi,
It is used for storing the DQE's for the respective system.
DQE is Distirbuted Query Engine Name.
HTH
Regards,
Dhruv Shah

CATS0003 or CATS0006 - how are these invoked on the portal?

Similar Messages

Maybe you are looking for