CATT for Creation of transfer orders

Hi,
Can anyone tell me what exactly is the procedure for creating a user executable CATT for creation of multiple transfer orders (Transaction code LT01).
Please treat this as urgent.
Regards,
Surya

Hi,
Please go through this link.....
http://help.sap.com/saphelp_47x200/helpdata/en/fd/f10538d6cb1e3be10000009b38f8cf/frameset.htm
This link having step by step procedure and screen shot.
If its useful reward points

Similar Messages

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • Automatic creation of Transfer order for Picking and putaway

    Hello All .
    I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery)  .
    thanks
    Rahul

    Hi
    To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
    For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
    You can find more details on this link
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    Thanks & Regards
    Kishore

  • Automatic creation of Transfer Order when a delivery is created

    Hi all ,
    I wanted to have Automatic creation of Transfer Order when a delivery is created ,
    what are the configuration activities that needs to be carried out .
    Thanks ,
    KSR

    Dear Friends,
    I am also facing the same problem; I want the system to create a transfer order at the time of creation of an outbound delivery.
    I have done customization as under:
    Step 001
    Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries > Maintain Output Determination Procedure
    Step 002
    On the screen, u201CProcedureu201D: Overview, choose the following:
    Procedure     Description
    V10000     Header Output
    Step 003
    On the screen, u201CControl datau201D: Overview, enter the following:
    Usage     Application     Procedure     Step number
    B     V2                     V10000     110
    Counter     Condition Type     Requirement     Description
    01     WMTA                     032                     Automatic TA
    The system does not create a transfer order automatically.
    May I request our learned friends to guide me?

  • Automatic/Direct Creation of Transfer OrderS

    Hello Gurus,
          these are my question:
       (1)for Automatic/Direct Creation of Transfer Orders, should it be created when saving delivery order, or do I have to create transfer order after this function ?   how to config this function?
    thanks very much!

    Hi,
    The concept of Transfer Order comes if the business have warehouse management system.
    Once the delivery is created, we need to do picking.
    This can be done in two ways
    1. Manual Picking
    This is done when there is no warehouse management. means in the delivery picking tab, you have a field as Pick Qty. The you have to give the quantity (either less than or equal to delivery qty field), then you can save the delivery. This is called manual picking
    2. Automatic Picking
    This is done when there is warehouse management is available. Then in the delivery picking tab, pick qty is grayed out. That means you cant enter the pick qty manually. For this you have to create a transfer order.
    For this you have two options
    1. With in the delivery:
    In the delivery it self before saving the delivery, you can click on "subsequent functions" drop down list on the standard menu bar, in that you have option "Create Transfer Order" click on that
    Then it will ask whether you want continue to next, say ok, then it will take you to Tranfer Order Creation Screen, Click on Generate TO item, and save it. Now the delivery is created and the Picking is done for that delivery.
    2. Using Transaction Code
    You can also do the same using transaction code. For this first you have to save the delivery.
    Goto T. Code LT03, Then it will ask for
    Warehouse Number (mandatory field)
    Plant (optional no need to mention)
    Delivery Number (mandatory field) and press enter
    Then it will take you to Transfer order creating screen, which will be nothing but above mentioned screen. Continue with same process and save it.
    Now picking is done for your delivery.
    It cant be possible to create a Transfer Order automatically once after delivery is saved.
    Hope this is clear.
    Reward if helpful.
    Thanks
    Praveen

  • Creation of transfer orders using reservation

    Hi,
    We have requirement to create a transfer order against goods movement reservation. In standard SAP, the transfer orders get generated only after posting goods issue for reservation. However, we need to create transfer orders first so that we can print the pick list first and the post the goods issue against those reservations.
    I know this is possible for outbound delivery. However, I have tried all ways to do this for reservation and could not find solution.
    Please help.
    Thanks,
    -Shekhar

    i have a similar requirement. I have not come across any solution to it in Standard. Then i opted for ABAP. Found a BAPI for the creation of TR and TO. the better option is the creation of TR rather then creation of transfer order. the user will be confirming the source storage bin where as the destination storage bins will be assigned based on the movement type.
    Once we have the movement type in reservation, we will create a transfer requirement with the respective requirement type. Destination storage bin will be defined by the movement type (or based on any configuration that you may have done).
    this will be used to create a transfer order where the user will be able to opt for the source storage bin.
    Hope this will be of any advantage to you.

  • Report for List of Transfer orders in warehouse management

    hi,
    i want generate a report for list of transfer order orders in warehouse management
    is there any report with you guys kindly help me,
    or any standard report is there to display list of transfer orders in warehouse management
    Thanks,
    Rajesh
    Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PM

    Hi,
    If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
    If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
    Please let me know.
    Thanks
    Nagarajan

  • FM for creation of production order creation

    Hi All,
    Can anyone tell me the BAPI for the production order creation.
    BAPI for creation of production order through CO01 transaction code.
    Thanks in advance
    Ramesh.

    Hi,
    Please check this FM CO_ZF_PRODUCTIONORDER_CREATE.
    Regards,
    Ferry Lianto

  • Release order for a stock transfer order in Product view

    Hi Experts
    My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
    I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order,  Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
    One more thing i am not even selecting any selection profile for Product view.
    What i need to check, Kindly suggest.
    Regards
    G C

    Hi G.C
    Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
    First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
    Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
    Try the above steps and do let me know if it worked.
    Regards
    KRN

  • Upload data for Tcode LT06(Transfer order creation) using BDC -very urgent

    hi experts,
          I got stucked up in writing a BDC for the Tcode LT06(Transfer order creation using wearhouse number) in MM module,
    the problem is like this, when i go to the tcode LT06 , it will ask for material doucument,mat. docu. year and wearhouse number, iam entering the inputs and then press enter, as soon as i press enter it takes me to the second screen where i will be selecting the item and then click on the button called  'Generate TO item'
    here the problem arises, as soon as i click the button iam getting a standard SAP error message(No Destination Storage Bin found in storage type 'IMP'). Due to this errror iam not able populate the batch input data on the screen, suggest me a proper solution. rewards will given if solution found useful.
    Kishore K

    Hi ,
    I have done the same in Background with BDC and TR Number for Multiple Materials ,
    Can u please explain the scenario, so then I would be able to try for solution ?
    Warm Regards.

  • User  exit for LT03 - Creation of transfer order.

    Hi All,
    In LT03 while creating a transfer order for delivery the system picks the storage unit in ascending order(FIFO - First in first out). Is there any badi available to change this picking order into descending order(LIFO- Last in first out). I have tried all the user exit related to transaction LT03, but nothing has served the purpose,has anybody faced this issue please share your views on this.
    Regards
    Sathya

    Hi Saravanan,
    you can try one of these FMs. It might be helpful:
    L_TO_CREATE_2_STEP_PICKING
    L_TO_CREATE_DN
    L_TO_CREATE_DN_MULTIPLE
    L_TO_CREATE_MOVE_SU
    L_TO_CREATE_MULTIPLE
    L_TO_CREATE_POSTING_CHANGE
    L_TO_CREATE_SINGLE
    L_TO_CREATE_TR .

  • Creation of Transfer Order for Inbound Delivery

    Hi,
    I am using L_TO_CREATE_DN for creation of a TO for Inbound Delivery.
    I am getting this message."""Item 180000166 000010 does not exist or is not relevant for picking"""
    The delivery is having Ware House number so i think it is relevent for picking... It is having an item 10 also. I dont know why this message is coming.
    Can anyone please let me know how to get rid of this error and create a TO for the inbound delivery.
    Regards
    Rakesh

    Hi Rakesh,
        Pad the delivery number with a 0 in front and check.
    like, instead of 180000166, pass 0180000166.
    Regards,
    Ravi

  • Automatic creation of transfer orders from goods receipt of purchase order.

    Hi experts
    The project i am currently working on requires the following;
    When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins.  I am aware that the stock goes straight into the 902 area once goods receipted.  Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
    In support of this, i have made an entry in transaction OMKX for the following;
    Reference Movement Type - 101
    Movement Indicator - B (goods movement for purchase order)
    Movement Type - 101
    TR Create Transfer requirement - X
    Immed. TO Creation - A
    Addl Data - X
    Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
    Could someone please help me
    Thanks
    Simon

    Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
    You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

Maybe you are looking for