CATW: Can't swith to next/previous week: changed data will be lost

Hello!
In CATW, when clicking on Previous or Next button without saving, we get the message: "Changed data will be lost". Even if we confirm this by clicking on "OK", the screen does not change and we remain on the first input.
Does anyone know what is wrong? I already tried to look for a note without any result.
Thanks a lot.
Matthias

Hi Sudhakar,
We had a similar issue with CATW timesheet in ECC 6.0. This thread was very useful in getting the solution for our issue. As a novice to ITS application we stuggled a lot tyring to get our exisitng CATW application in 4.7 to work as an Integrated ITS application.
We experimented with different parameters both on the service (SE80) and configuration parameters in SICF. Our current understanding is that the parameter value maintained in SICF overrides that in SE80.
We have the following parameters in SE80 for CATW service:
~SINGLETRANSACTION 1
~THEME 99
~WEBGUI 1
~WEBGUI_SIMPLE_TOOLBAR 1
We have the following parameters in SICF for CATW service:
~WEBGUI 1
~THEME 99
~WEBGUI_SIMPLE_TOOLBAR 32
~SINGLETRANSACTION 1
~TRANSACTION CATW
With this the old CATW screens are working. I understand ~THEME 99 (Do not use sl) will allow to get the old CATW screens.
One more thing we did is that we synchronized all the templates and mime objects in ECC 6.0 with 4.7. Except for screen 4000 rest of the templates are in sync. This screen is missing in ECC 6.0
We activated the SAP ICons, Mimes services in SICF as well.
With this the old CATW ITS application is working fine as an Integrated ITS application.
If we set the value of ~TRANSACTION CAT2 we get the new CAT2 screens with missing icons. However we would like to stick to older ITS application look and feel so we are not bothering about this any more.
Regards,
Anu

Similar Messages

  • If I download the 65 bit I tunes it asks if I want to delete I tunes or fix.  If I choose delete so that I can reinstall the 64 bit, is all my data in library lost

    If I try to download the 64 bit I tunes, the options are to fix or delete.  If I choose delete (so that later) I can reinstall the 64 bit, will all my current data in library lost

    Hello schecmi,
    The iTunes music and media files are stored in a different location than the iTunes application.  Because they are stored in different locations, you can uninstall the iTunes application without affecting your media files.
    The iTunes media files are stored in the following locations:
    About the iTunes Library files
    Your two iTunes Library files keep track of what media you've added to iTunes, how you've organized it, and other information such as playlists. These two files are in your iTunes folder by default:
    Mac OS X: /Users/username/Music/iTunes/
    Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
    Windows Vista: C:\Users\username\Music\iTunes\
    Windows 7: C:\Users\username\My Music\iTunes\
    Windows 8: C:\Users\username\My Music\iTunes\
    You can find the full article here:
    Where are my iTunes files located?
    http://support.apple.com/kb/HT1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • InfoView - Query Filter for date variable of previous week

    I am trying to automate the process to generate a report for the previous week's data.  Right now I just prompt the user to enter in the start & end date/times, but I would like to somehow automate the date filtering using a Query Filter.
    In particular, the report will be generated every Thursday at 12:35 PM, and it needs to filter only the date field between the date's of the previous Thursday @ 1:31 PM, and the current Thursday @ 12:30 PM.
    I know there is a way to do this using an offset or something like that, but I'm a bit of a newbie to InfoView....so any help is greatly appreciated.  Sorry if the explanation is confusing.
    Thanks so much,
    Nick

    Hi,
    You can create two objects on universe level or first database level then add in the universe based the sysdate.
    Then go to  webi  query and  replace the prompt value by these objects and from next time when ever user refresh this report will run  without any prompt.Same thing in the scheduled report.
    Thanks,
    Amit

  • How to get data for current week and previous week using customer exit in Bex.

    Hi everyone,
    I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using  Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
    Thanks in Advance,
    G S Ramanjaneyulu.

    Hi krishna,
    Thanks for your quick reply, can you have a look at my code,
    case i_vnam.
    WHEN 'ZPWK_CWK'.
    ranges : pre_week for sy-datum.
    data : start_date type DATS,
           end_date TYPE dats .
    ************FM TO GET FIRST DATE OF CURRENT WEEK ************************
    CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
      EXPORTING
        DATE_IN  = sy-datum
      IMPORTING
        DATE_OUT = start_date.   " WEEK FIRST DATE
    end_date = START_DATE + 6.   " WEEK LAST DATE
    END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
    START_DATE = START_DATE - 7.   " PREVIOUS WEEK START  DATE
    **********PREVIOUS WEEK DATES IN PRE_WEEK******************
    pre_week-SIGN   = 'I'.
    pre_week-option = 'BT'.
    pre_week-LOW    = START_DATE.
    pre_week-HIGH   = END_DATE.
    APPEND  pre_week.
    CLEAR : START_DATE,END_DATE.
    endcase.
    Regards,
    G S Ramanjaneyulu.

  • Next/Previous link for products?

    How can I add a Next/Previous button that navigates to the next product in a catalog, on the large product html page of an ecoomerce layout?

    Hi Juliaor,
    Did you have any luck with adding a next / previous button that navigates the the next product in the catalog from the large product layout pages?
    We tried:
    {tag_previouspage,} 
    {tag_pagination}
    {tag_nextpage,}
    but this only works on catalogues when there are more products than the amount that fits on the catalogue page (e.g when the catalogue page goes over multiple pages).
    Would love any help

  • Why is the next/previous buttons of my sennheiser 310 not working with my iphoner

    I have the sennheiser 310. The play/stop buttons are woeking fine but not the next and previous buttons. I have an iphone 4

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • Hide the Button Next / Previous in Main Steps on GAF.

    Hello Friends,
    I have to develop one application using GAF.
    In this applicaion there is no INITIAL Screen.
    application directly start with Main Step but Application doesn't have Button Next and Previous like standard GAF application.?
    How to Hide the Button Next / Previous and change the name of Button?

    Hello Julia,
    You are absolutely correct.
    But the thing is, first screen of my application only have the button 'Start' and also roadmap is displayed.
    But in standard GAF application,
    if i configured my window as Inital Screen then button Start will come, but raod map will not come.
    if i configured my window as Main Step then Road Map will come with Button 'Previous; and 'Next'. but Button Start will not come.
    either I can add the Button 'Start' in Main Step or change the name of Button 'Next' to 'Start'.
    But button 'Previous' nothing make sense, so i have to hide this button.
    my 'Start' button will act as Button 'Next'.
    but how can i hide the button 'Previous' and change the name of button 'Next'.
    could you please suggest me shall i develop this application using GAF or simply use the Roadmap UI element in my web dynpro abap application?
    Thanks
    Edited by: Chandraprakash Sulakhe on Apr 6, 2009 11:34 AM
    Edited by: Chandraprakash Sulakhe on Apr 6, 2009 11:42 AM

  • Shuffle no longer responding to next/previous and volume control

    I have an shuffle that no longer responds to the ring control. I can start playing and stop it but I can't jump to next previous songs and I can't alter the volume. At first this was intermittent so I'm wondering if there may be some corrosion involved. I have a Gen 3 shuffle but never use it because it's harder to control and I can't use my primo Shure ear buds on it.
    Can I maybe squirt some WD40 under onto the ring? It's past the one year warranty. I've already had it replaced once for dead battery.
    Thanks!
    Michael

    Thanks, I looked at ifixit.com's teardown of this model and that's exactly right... little contacts on circuit board. What's interesting is that when I first use it I can change tracks but after a few minutes of playing the ring control stops working altogether, while the center on/off button works. It's almost as if it's temp related, maybe it warms up when in contact with my body. I'll have to test that.
    http://www.ifixit.com/Teardown/iPod-Shuffle-2nd-Generation/437/1

  • Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

    Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

    try a reset.
    Hold the home & power buttons down simultaneously until you see the Apple logo appear.
    Note: no data will be lost.

  • Can I reformat an external hdd without losing data?

    I hava a Seagate goflex 500gb that is about half full with itunes and videos.  It is formatted as windows ntfs it does work on my macbook pro.  I would like to add Iphoto 11 and have the hdd refromatted mac os (journaled).  I do not have enough storage on my macbook to put the data before reformatting.  So can this be done or do I need another hdd?

    No you need another HD, If you format that HD for the mac all your data will be lost.
      a 1TB external now is running around $65
    Everyone should have 2 backups of their important stuff anyway, ....the motto is 2 backups is 1, and one is none. HD can and do fail. Important data that cant be replaced needs to be protected.

  • Previous week / Next Week

    How can i implement Previous week / Next Week, like previous n / next n records?
    Can you please send me links for implmentation code or help me implement?.
    Please help.
    thank you.
    Previous / Next n Records
    http://tutorial20.easycfm.com/index.cfm?fuseaction=tutorial&tutorialID=20http://tutorial20.easycfm.com/

    This is how i make the Next and previous link.
    == At the top of the page ==
    <cfparam name="URL.StartRow" default="1">
    <cfset NextRow = URL.StartRow + 25 />
    <cfset PreviousRow = URL.StartRow - 25 />
    <cfif PreviousRow LTE 0>
      <cfset PreviousRow = 1 />
    </cfif>
    == Next and previous links ==
    <cfif NextRow LTE QueryName.RecordCount >
      <a href="#CGI.SCRIPT_NAME#?StartRow=#NextRow#">Next page</a>
    <cfelse>
    </cfif>
    <cfif PreviousRow LT URL.StartRow>
      <a href="#CGI.SCRIPT_NAME#?StartRow=#PreviousRow#">Previous</a>
    <cfelse>
    </cfif>
    == Query results ==
    <cfoutput query="QueryName" startrow="#URL.StartRow#" maxrows="25">
    #Your output goes here#
    </cfouput>

  • How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months)

    How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months).
    I'd like to print the next (up an coming) weeks of my calendar from iCal in month view - The idea is to get this information on 1 sheet of A4.. just like the month view.. but as far as i can see the month view only gives you current or next complete months.. The ONLY time this give me the view I want is in the first week of any given month.. the rest of the month part of the print is in the past and not enough of the up and coming weeks are shown?
    I can believe  the app won't allow you to do this .. am I missing an easy fix.. or has it been rectified in Yosemite .. I'm using mavericks 10.9.5.
    Thanks

    Hope this helps.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can i create an album with chose category list and next/previous button

    hello guys im working on a project for my uni i finished the whole website but one thing is missing
    i need to create a photo album with next and previous button, with choosing a category and inside each category i have like 5 pictures and i can change with the next/previous buttons to see another picture of the  same category.
    Please see the picture below to see what i mean.
    some told me it needs flash but i dont know how to work on it :S so plz if anyone can help me
    thank you

    Dear Mr. Murphy,
    thank you for your help.
    Actually i have tried to search for a tutorial and i found that one that was very helpful and gave me the half solution. the part i found and it worked with me is the part of the next and previous buttons and moving from an image to another.
    SO the part i still need is the list so when i click on a category i get the pictures of the chosen category, I had the idea of create a flash for each category alone and maybe i will be able to add them all together.
    But i guess it's too much work and there must be a way where i can make it all in one flash file.
    If you have any idea let me know please, thank you again for your help and i'm trying to search for the AS3 image gallery as you told me.
    Regards

  • Have Operating System 10.6.8, Mail Program 4.6.  How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

  • To get time-booking entered thru CATW,CAT2 for the previous week

    Hi Experts,
    I need to analyze the absences booked by an emolyee. I have obtained the time-booking for the present week from the user-exit where I am writing the code. But I have to check the booking of the previous friday (previous week) to check if the same absence is taken on Monday (current week). Thus I have to check the booking made by the employee on friday previous week. How can I get the time booking data for the previous week?
    Do we have any Fm to get that?
    Thanks
    Akash

    BAPI_ABSENCE_GETDETAIL         Read absence
    BAPI_ABSENCE_GETDETAILEDLIST   Read instances with data
    BAPI_ABSENCE_GETLIST           Read instances
    But you need for CATSDb ie for CATS
    use standard trans code cats_da ie rcats_report_activities
    also we have bapis
    BAPI_CATIMESHEETMGR_CHANGE     CATS: Change data records
    BAPI_CATIMESHEETMGR_DELETE     CATS: Delete Data Records
    BAPI_CATIMESHEETMGR_INSERT     CATS: Insert data records

Maybe you are looking for