Cause and effect map, zoom = "fit to page" - default option

when opening cause and effect map, the default zoom option is : zoom = 100%.
how can I change the default to be : zoom = fit to page ?

Sorry no workaround as yet...
I too am now sick of the amount of expensive paper I have wasted due to the Preview app default print setting of 'Scale to fit'.
- No option to print at 100%, you have to manually input this information.
- No way to change this default in preferences, you can change the opening viewing size of a doc to 100% though.
- Doesn't remember the previous settings if you decide to reopen the doc and print another copy.
I also found that if I attempted to print an A4 doc with bleed and crop marks, it would set the default paper size to A4 and the annoying scale to fit would be set to 83%. If I then changed the scale by typing in 100% but don't hit enter for fear of the print starting and then simply use the drop down to change the paper to A3 and then change the orientation and then hit enter it ignores that you have changed the scale and prints your doc at 83% on A3 - Brilliant!
It's a shame to say that I will be going back to acrobat for pdfs!
If you can't put a 100% scale radio button on the print dialogue box either allow people to change the default in prefs or even better allow the presets to control paper size and scale of printing!

Similar Messages

SSM Cause and Effect diagram

Hi
I have question about Cause and Effect diagram setup in SSM10.
Is it possible to set up cause and effect relationships only between objectives in "objectives" level?
I added two more levels to Scorecard and I can setup C&E diagram only to second scorecard hirerarhy level (Objective).
For example:
Level 1 - Perspective
Level 2 - Objective <<<<< C&E digaram only covers this level?
    Level 3 - Custom Objective level
      Level 4 - Custom Objective level
        Level 5 - KPI
Am I understanding correctly?
Toomas

Toomas,
You are correct. No matter how many levels you create for your hierarchy, cause and effect will only work with Objectives.
Regards,
Bob

I am have problems with firefox 5& 6. It does not display correctly. I have tried the no squint and the internal zoom. Some pages load ok, others like yahoomail, load tiny unless I zoom and then other pages have problems. Why? What else can I be doing?

I am frustrated. With the no squint, which has a mind of its own, then some pages are fine, in others the type is too big or too small for the frames. If I use the default Firefox zoom that is no better. I have to set things for like 130 percent and am constantly having to click on the zoom and change things. I never had that with previous versions? Why can't Firefox just go back to displaying text in the correct frames at a decent size?

I have played with all the options in no squint and the default zoom thing. My email list in yahoo remains tiny tiny, other things do not. If I enlarge that, then other things are too big. I never had this problem with older versions of firefox. I never had used any zoom features, it all sized itself correctly.
To troubleshoot, I tried to open the same things with chrome, and it had much less of a problem sizing the type etc.
I am kind of at my wits end here.

Cause and effect in iPhoto

What would cause my photo library of several thousand images to suddenly go blank and become an unrecognizable format? When I highlight a blank "place-saver", the information block says it is a JPEG Image. I have several other libraries which have not gone blank. when I open them and highlight an image, the information block says it is a JPEG Image also. What would make the blank images produce a message that says "unrecognizable format" when in fact it is the same as images which did not go blank (JPEG image)? Please help me. I need the images.
Thanks

If when I put the curser to anyone of the dotted squares it identifies the photo by number, by date, by time, by format and by size, how does that happen if the images are not anywhere?
iPhoto is a database. What you're seeing there are the entries in the iPhoto database that correspond to the photos.
WHy do you assume that these drives are backing up your photos? Just plugging the the disks won't make a back up. Something is copying the Library to these disks.
File Recovery software - such as File Salvage- will scan the disks for recoverable files. Actual recovery requires a purchase.
Regards
TD

Cause and Effect Apps that are Blue Tooth Switch Compatible

I teach kids with mulitple disabilities and I am looking for apps that are as simple as pressing a blue tooth switch and a picture pops up or a song plays. Does anyone know of any or have recomendations? It would be so appreciated!

I have this same question Jadrb? Did you find a solution?

Page Default Options for LaserJet 4000N

Greetings! Does anyone know of a way to change the default to print "Page 1 of 1" (or even "Current Page") on a LaserJet 4000N?
HP has NOT been helpful in answering this question; so, I'm turning toward users. Help!?
We'd like to print anything but "All." If not directly, has anyone run across a software patch?
Thanks, in advance...
Mike
La Veta Elementary School

Ok this gives me J2EE, Portal, and KM.
http://<hostname>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.support.version.default
I just need a way to find the BP now.

KDE: margins incorrect when printing because of fit-to-page option

I'm attempting to print a PDF file with Okular (happens with other KDE/Qt applications as well) to my HP Deskjet D2530 printer. The PDF has one inch margins on all sides, but when printing, additional space is added to the margins.
The page prints perfectly using lp:
$ lp /Path/to/PDF.pdf
Should also note it prints perfectly with non-KDE applications such as epdfview.
I turned on debug mode in CUPS to find what options KDE sends to CUPS. I narrowed it down to the "fit-to-page" option causing the issue.
I can reproduce the incorrect margins exactly with this command:
$ lp -o fit-to-page -o PageSize=Letter /Path/to/PDF.pdf
Now the issue I'm having is disabling this. I see nowhere in the KDE print dialog to disable fit-to-page, and have searched CUPS' documentation for a way to disable it on that end, but could not find anything. Searching for this issue has similiarly turned up nothing. I've also tried adding "fit-to-page=false" to ~/.cups/lpoptions with no result. I can't be the only one who has dealt with this. Is there some configuration option I'm missing somewhere or should I report this as a bug upstream?

hello!
i have a similar problem:
https://bbs.archlinux.org/viewtopic.php … 3#p1402373
for me the fit to page cmdline option does not apply and the output is always bigger than one page ... same goes for print menues with the option to turn on/off fit to page ...
Last edited by brrbrrbruno (2014-04-09 17:22:04)

Fit to Page doesn't work on HP 8600

I have a HP Officejet Pro 8600 e-All-in-One Printer I purchased from BestBuy a few days ago, and am checking out the functions that I deem critical. One of the features I use often is the copy subfunction, "Fit to page" -- I know how to work the 8600 menus, and after a little futzing around I found the "Fit to page" option, selected it, and tried to enlarge an original to fit the (letter size) page. Alas, it printed at 100%. I tried manual enlargement, and it worked. Never could get "Fit to page" to work.
So I then opened up Photoshop and made a prestine target for testing: a 4x6 inch graphic, 300 pixels/inch, white background with a 12 point black border. On the inside I filed it with 12-point Times Roman text. I printed it on my LaserJet 200. Finally, I trimmed it, leaving a margin (about 1mm) around each edge.
This gave me a good clean copy. I first set the 8600 to enlarge the copy by 175%, and it came out as expected (enlarged). Next I set the 8600 to "Fit to Page" and once again it produced a 100% copy.
Yikes!
So I called HP telephone support. There was a language barrier in our 50 minute conversation (he was located in Delhi, India), but that wasn't the biggest problem. We just could not get it to work. I'm not tech dummy (wrote my 1st program 51 years ago), and have used HP printers since the the Deskjet 540. All familiar territory. But I confess I'm flummoxed.
HELP !!

Responding to AWBrown
Yes, I've tried the HP forum, and it has not been helpful. I've encouraged two other friends to purchase 8600s in the past year (since the 8500 went off the market); both did (actually, as I recall, both were from BestBuy) and both are well pleased with their purchase. However, neither has any use for the "fit to page" copy function. I normally use it about three times each week. I could make up an enlarging calculator using Microsoft Excel, but I actually choose the 8600 because it is the successor to the 8500 and it kept the "fit to page" copy function. Someone suggested that I try to place the original copy on the scanner bed instead of using the document feeder -- well, that is the way I started (and always did on the 8500) -- I tried the document feeder only after the scanner bed failed.
Several hours of telephone calls with HP tech "support" has not be helpful -- the second person was going to escalate the issue to her supervisor and call back. Alas, no return call. All they have are scripts which, the best I can tell, help them navigate through the printer's control panel menu. None of them have actually used this feature before. And there is no "ticket number" so that with each call you go through the same lengthy process to reset the 8600 to factory defaults -- something I can do in my sleep now.
After being involved in what we now call IT for 50 years, this has been one of my most flustrating experiences. My concern is that I may take the 8600 back to BestBuy (I'm still within the 15 day return window), and have the replacement unit do the same thing.
Yikes!

Trouble with after effects map and geotagging cities using "locations" plugin

Question for anyone who uses the After Effects Locations plugin to add location based data to After Effects maps. I just downloaded (and watched the tutorial) "Locations" plugin from this page: Locations
In his tutorial, the "Locations" designer (Fabian) explains how to use gpsvisualizer's geocoder to obtain lat/log coordinates for a bunch of cities. The problem is that Google won't allow me to obtain more than one city's lat/long coordinates at a time. Google says I need an "API key" to obtain more than one city's coordinates.
I also need to know if Locations will work with any world map? Any help would be much appreciated.
I've had no luck so far using "Locations" after downloading an equirectangular (2000 x 1000 pixel) map from wikipedia:
Basically all the cities are way way off on the world map, even though I have the correct lat/long coordinates for those cities.
Le Havre for example is in Normandy and on the map it's not even showing up in France. So everything is wrong.

Hi Dave,
Not sure why but now everything's working!
I must have been off with something, but haven't figured out what exactly.
Still using the 2000 x 1000 pixel map but it's actually a vector map prepped in Illustrator, so not pixel based. Just the artboard is set to 2000x1000 pixels.
Thank you in any case.

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginning

Some add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific

Can too large a folder cause issues and effect performace of my Mac Pro

Hi, I have a 180 gb folder filled with important data within my Home folder. This folder has a many subfolders as well. The folder is on my startup drive and where I have Snow Leopard installed. Can too large a folder cause issues with my mac and effect performance? Thanks

another way to ask, would you make better use of, and improve I/O and performance, if you used your other drive bays? yes.
Boot drives with even less than 50% free is probably not a good idea. All depends on whether 200GB is on 1TB or on 500GB drive. And how fragmented free space even.
Lifting, loading and writing or copying 4GB files of course does have an impact, so if you work with 2GB files in CS5....
Having a dedicated type boot drive, media drive (and isolate media and library files) as well as scratch drive is normally done with Mac Pro.
The biggest bang in performance: lean mean SSD boot drive.

I was viewing a page online, and somehow it zoomed out so the page is tiny in the browser window. How do I zoom back in?

I was viewing a page online, and somehow it zoomed out so that the page is now tiny in the browser window. I've shut down all my windows and rebooted my computer, but every time I return to that page, it is still tiny. I've looked for a button to control the zoom, but cannot find anything. How do I zoom back out so the page is the correct size again?

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

I want to zoom in on my home page, and keep it zoomed in when I reopen Firefox. What do I need to do?

I want to zoom in on my home page, and keep it zoomed in when I reopen Firefox. What do I need to do?

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
See also http://kb.mozillazine.org/Zoom_text_of_web_pages

Interactive elements and even article zoom sometimes freezes on first page in Adobe Content Viewer r31.

Interactive elements and even article zoom sometimes freezes on first page of articles in Adobe Content Viewer release 31 (tested on iPad 3 and iPad Air). If user swipe to second page and return back to first page, all elements works normal again.
Interactive elements are mostly buttons for changing states of multi-state objects, or buttons for opening URL in build-in browser.
What could be the reason? Is there some bug in ACV r31? Or it alocates more memory for the application, so there is less memory left for the content? It wasn't happen before in r30.

hello, me the same thing is happening. I made a folio and he usually worked before the last update of content viewer. the multi-state buttons also freeze and take to work. This bug will be fixed in the next update?

Cause and effect map, zoom = "fit to page" - default option

Similar Messages

Maybe you are looking for