Cause and solution to XSL-1009 problem

Hi,
I am encountering message "attribute 'match' not found in 'template'" when using Oracle XDK 9.2.0.4.0 with XSL pages/code written for Oracle XDK 1.0.0.0.0.
If I switch back to xmlparserv2 and oraclexsql servlet from Version 1.0 it works fine.
I've searched the internet but there is nothing worthwhile to be found.
Any help would be greatly appreciated.
Thank you,
Sorin

the router is a netgear wireless extreme for pc and mac

Similar Messages

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Certain web pages will not load and itunes and the appstore wont load either, what could be a probable cause and solution to this problem?

certain web pages will not load and itunes and the appstore wont load either, what could be a probable cause and solution to this problem?

the router is a netgear wireless extreme for pc and mac

Photoshop CS6 pentool reaction rate was slower than the first use of Photoshop CS6 pentool. I wonder the fundamental cause and solution rather than optimization.

Photoshop CS6 pentool reaction rate was slower than the first use of Photoshop CS6 pentool. I wonder the fundamental cause and solution rather than optimization.

I have no problem with CS6 Pen tool performance. Its instantaneous. I'm using Windows 7 Pro and CS6 version 13.1.2. on a Dell workstation PC.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

I have a bright spot on the screen of just purchased iPad mini 32. What is the cause and solution?

I have a bright spot about quarter inch circular on the display of just purchased iPad mini 32 g . Does anyone know the cause and solution?

If you just purchased the tablet, take it back to an apple store and have it replaced.

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

Repository Connection Error: Causes and Solution?

Hi All-
We are facing the following error frequently when working with OWB client 11gR2:-
Repository Connection Error: The connection to the repository was lost, because of the following database error: Closed Connection.
Exit OWB without commiting
Can anyone of you help us understand the root cause and possible solution for the same?

First you need to check is are you able to connect to the same user form Sqlplus.
Cheers
Nawneet

My Apple ID is no longer working, what is the cause and solution to getting it back?

A few days ago, my Apple ID stopped working. over the last week, i have been trying to recover thru the normal website process. There are two options on the website - have a temp password sent to your email OR answer a security question in my case BIRTHDATE. When requesting they send a temp password, the procuess would seem to complete, but I never got an email (not in 'junk' folder either). When entering the answer to the secret question, that did not work either.
We have been trying many different tactics and nothing has worked...until today.
We decided to try establishing a new Apple ID. AND we used the same ID. It accepted it! We are now facing issues with finishing the set up of the account thru iStore, we are hung up on the credit card entry (we are living overseas, but entering with valid US credit cards).
Not so concerned about the latter issue. I am worried that we were able to re-establish an Apple ID using the original. The system is treating it as if it never existed.
I've gone thru the community support site, and it seems like others have had similar issues, but in the threads I've read, there never seems to be a resolution to the issue.
Help!

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Why it is taking too much time to login in yosemite? and to load webpages.. whenever i kept in sleep mode battery drains itself causing overheat... what might be the cause and solution? i have my projects going on..please help.thanks.

thanks

   Reset PRAM.   http://support.apple.com/kb/PH18761
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
   Start up in Safe Mode. http://support.apple.com/en-us/HT1564

I have moved and changed ISP from Brighthouse to Verizon. I am receiving my icloud emails, but the senders are receiving messages that they are undeliverable. I can't find the cause or solution to the problem. Any thoughts?

I have moved and changed ISP from Brighthouse to Verizon. I am receiving my icloud emails, but the senders are receiving messages that they are undeliverable. I can't find the cause or solution to the problem. Any thoughts?
PS. I have deleted Roadrunner accounts, and reset new email account.

You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.

TS1398 My iPhone Wifi is greyed out.In Uruguay in Cellular Center that is where I buyed it told me it has no solution,it´s a problem of hw accepted by Apple,and they didn´t change it by another one cause their warrantee is 3 months and I bought in decembe

My iPhone Wifi is greyed out.
In Uruguay in Cellular Center (+598 2 903 3333) that is where I buyed it told me it has no solution, it´s a problem of hardware accepted by Apple, that Apple change the phone in this cases, but that they can´t change it by another new one because their warrantee is 3 months and I bought in december, 2012. It cost me US$ 1,250 and I want a solution because I saw in the Apple web that iPhone warrantee is 1 year and I am still covered by it.
I have the invoice dated December 24, 2012.
Do you have any solution to my problem?
It is hard to believe that a so expensive iPhone has a life of 6 months.
Do I need to take my iPhone to anywhere they can solve its problem?
Thank you so much.

Your Service and Support Coverage
iPhone 4S
Serial Number: C8PJHGELDT9V
Check another serial number
Valid Purchase Date
A validated purchase date lets Apple quickly find your product and provide the help you need.
Telephone Technical Support: Expired
You are eligible to purchase telephone technical support from an Apple Advisor.
Contact Apple Support
Repairs and Service Coverage: Active
Your product is covered for eligible hardware repairs and service under Apple's Limited Warranty.
Estimated Expiration Date: 10 December 2013
Learn about Apple's coverage information for your product.
Set Up a Repair
Eligible for the AppleCare Protection Plan
Get the AppleCare Protection Plan to extend your hardware repair coverage and add technical support for 2 years from your iPhone purchase date

My Iphone/ Ipod touch 4th gen WiFi problems and solution

Just wanted to let people know the problems that I had with my 4th gen Ipod touch and Iphone 4 WiFi connections (and my solution).
I was having consistent problems with my WiFi connection at home - my devices were connecting fine to the router and apparently the signal was full strength; however, nothing was working properly (internet, itunes, app store). To be specific the devices would work for 5-10 minutes but then the connection would start to falter. My other wireless devices were working fine (HTC Hero, laptops etc.) - just the ipod and iphone seemed to suffer from this signal problem (although the router was always apparently connected).
Obviously, I read countless forums to try and diagnose the problem. There seemed to be a litany of possible causes and I tried the following to resolve the issue:
- updated router (Netgear WGR614 v6) firmware
- rotated wireless encryption (WEP/WAP/nothing)
- changed router channel
- reset router power
- reset network settings on Apple devices
- changed g and b settings on router
Nothing seemed to work so I began to question the hardware i.e. the router (which I knew was working from my other devices) and the iphone/ipod.
I tested my iphone and ipod on other wireless networks (McDonalds in the UK has free WiFi) and found that, in contrast, they worked fine on other networks. I had read a few posts from people saying that my router was perhaps too old. So as a last resort I bought myself a new router (Netgear WNR2000 v2). I was loathe to do this earlier in case it didn't work, since reasonable spec routers are £50
Anyway it worked ... straight away. I have tested the new connection at home using this SpeedTest app. D/load = 9.01 Mbps, U/load = 0.46 Mbps, Ping 65ms. The router is using the full encryption (WAP2 something ...) and N connection.
As you can probably tell I'm no WiFi expert - I just wanted to post this in case people are having similar issues with older routers. I wasn't able to find any definitive advice and solutions from other users so I though I'd contribute here, which I guess is the first port of call for new Apple users, like me
I bought the new router 10 days ago and have been enjoying my full speed connection ever since - touch wood. Hope this helps.

Sounds like an intermittent contact problem some where eon the logic board. Hard to trace down and fix

CD-DVD ( Optical Drives ) Common Problems and Solutions

CD/DVD Common Problems…
Dear friends, I have noticed that many laptop users suffering from some common problems. cd/dvd ( Optical Drive ) problems are one of them.. so here I am trying to collect and make available solutions related to cd/dvd drives . Almost all solutions are already advised in previous posts but these are all are in one post. We all are here for sharing problems and solutions. I always appreciate all corrections and additions. In first look optical drive problems seems like hardware problem. These problems have hardware/software both possibility so I request to administrator, to make available this post in both ( hardware – software ) sections. I put only solution links to save forum’s valuable space.
CD-DVD drive called an OPTICAL DRIVE.
CD-DVD discs called A MEDIA
There are 2 possibilities for optical drives problems.
Widows based problems
Hardware based problems
First here are windows based few common problems
All windows based solutions are from Microsoft Corporation.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs - Windows XP...
Symptom:Your CD drive or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or DVD
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows V...
Symptom : You upgrade a computer to Windows Vista or install Windows Vista Service Pack 1 or you install or uninstall applications that have a CD/DVD filter driver.
When you restart the computer, the CD drive or DVD drive no longer works as expected
Your CD or DVD drive cannot read or write media
Symptoms : Your CD or DVD Drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to by your CD or DVD drive
You receive one of the following errors:
A class specific or device specific driver is missing or corrupt
A CD or DVD drive cannot be found or is not connected
The CD or DVD drive is experiencing a problem that prevents it from working properly
The CD or DVD drive is not accessible via an assigned drive letter
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or ...
Symptoms:
The disc label does not appear in Windows Explorer.
The contents of the disc do not appear in Windows Explorer.
When you insert the disc in the drive or when your computer tries to read the disc,the computer stops responding.
You cannot eject the disc from the drive.
The computer takes a long time to read the disc.
CD drive or DVD drive errors may cause unexpected program crash in Windows XP
Symptom : Error
"Program_name has caused and error and must be closed. We apologize for the inconvenience. If you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send to help us improve rogram_name. We will treat this report as confidential and anonymous. To see what data this error report contains, click here."
You cannot write to a DVD-RAM disc that is in a DVD-RAM/CD-RW combination drive
Symptom : "The disc in the drive is not a writable CD or it is full. Please insert a blank, writable CD into drive D:\, or insert a disc with enough free space to hold all the files you have selected for writing to CD. "
DVD-RW Drive Appears in My Computer as a DVD-R Drive
Symptom : "If your computer has a DVD-RW (digital video disc rewritable) optical drive, the DVD-RW icon may not appear in My Computer. Instead, your DVD-RW optical drive may appear as a DVD-R (digital video disc recordable) icon."
Windows XP does not recognize a DVD-RW disc
Symptom : When you insert a DVD-RW disc into the DVD drive of a Microsoft Windows XP-based computer, Windows XP does not recognize the disc. For example, you do not see any files on the disc.
You may also experience this problem with DVD-RW discs that have been formatted as VD-VR. Some consumer DVD recorders use the DVD-VR format.
CD-R drive or CD-RW drive is not recognized as a recordable device
Symptom : When you try to burn data to a CD-R or a CD-RW, you do not have the option to send data to the CD drive.
When you view the properties of the CD-R drive or the CD-RW drive, you notice that the Recording tab is not displayed in the CD Drive (drive_letter: ) Properties dialog box, where drive_letter is the letter of the CD-R drive or CD-RW drive.
Note To view the CD Drive (drive_letter: ) Properties dialog box, click Start, click My Computer, right-click the CD drive that you want, and then click Properties.
Additionally, you may receive the following error message:
There is no disc in the drive. Please insert a writable CD into drive.
CD-ROM Drive May Not Be Able to Read a UDF-Formatted Disc in Windows XP
Symptom : Your computer cannot read some or all files on CDs or DVDs that were recorded through the use of the Optical Storage Technology Association (OSTA) Universal Disk Format (UDF) file system standard. Symptoms may include:
The disc is not recognized at all and shows up as empty.
Error messages such as "The file or directory is corrupt and unreadable" appear when you try to access files in Windows Explorer.
Some portions of a DVD-video may not function correctly
How to troubleshoot issues that occur when you write data to a CD-R or CD-RW optical disc in Windows...
Symptoms :issues that occur if you write data to CD-R and CD-RW optical discs and how to troubleshoot issues with CD-R and CD-RW drives.
These are most common issues related to optical drivers.
Tomorrow will try to explain hardware possibilities.
All friends suggestions and correction are highly advisable..

I upgraded to W7 and everything works fine except two things.
I followed the
http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upgrade-Guide-for-dv6000-dv9000...
process and still have the problem DVD not under device manager
DVD spins when booting but after W7 splash screen no longer functions, it did work prior to upgrade.
I have seen many listed problems but no solution. my device is a TS-L632N and based on the most recent drivers i can find still not working. I looked in the registry and it is not listed under cdrom or
{4D36E965-E325-11CE-BFC1-08002BE10318}
there are no upper or lower filters

Review Problems and Solutions after upgrade question

I have recently migrated from WSS 3.0 to Sharepoint Foundation 2010. I now have a the following messages in Sharepoint Admin.
The SharePoint Health Analyzer has detected some critical issues that require your attention. View these issues.
Accounts used by application pools or service identities are in the local machine Administrators group.
Using highly-privileged accounts as application pool or as service identities poses a security risk to the farm, and could allow malicious code to execute. The following services are currently running as accounts in the machine Administrators group: SharePoint
Central Administration v4 (Application Pool)
SPTimerV4(Windows Service)
Built-in accounts are used as application pool or service identities.
Using built-in accounts like Network Service or Local System as application pool or as service identities is not supported in a farm configuration. The following services are currently running as built-in identities on one or more servers: SPSearch4(Windows
Service)
The last time I tried to correct this type of issue I wound up creating a problem that I was unable to correct. I had to reinstall Sharepoint. How critical is this and what is the best way to make these changes without causing larger problems?
I am using two accounts to run the services/pools/etc. Well 3 if you count the Local System. Account #1 and #2 are not in the Admins group. They were when I installed everything but I have since removed them.

Hi Poly,
I recommend to follow the steps below to see if the warning message remains:
1.   Re-run Rule Definition.
In Central Administration, go: Monitoring > Health Analyzer > Review rule definitions. On the Health Analyzer Rule Definitions page, in the Category: Security group, click the rule definition link, Accounts used by application pools or service identities
are in the local machine Administrators group. Click the Run Now button, then click Close. Wait a minute or two, and then return to Review problems and solutions page.
2.   Reset Farm Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Administration service. Double-click this service, select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
3.   Reset the Farm Timer Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Timer service. Double-click this service and select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
More references:
http://alstechtips.blogspot.com/2013/12/health-analyzer-accounts-used-by.html
http://technet.microsoft.com/en-us/library/hh344224(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff805066(v=office.14).aspx
Victoria Xia
TechNet Community Support

I am suddenly logged out from whatever program or app i am working on and i have to log back in. one solution suggested is to reset or restore of my IOS software which is quite an involved endeavor. anyone knows of the cause and simpler solution?

i find that i am suddenly logged out of program or an app or website, and i am back to the HOME screen. i have to log back in and sometimes i find back exactly where i left off, some stuff i have entered or written, or sometimes i have to start all over again and re-enter data or write back what i seem to have lost.
i tried a different browser and it does not solve the problem. i tried different apps, website and programs and it happens anywhere and at any app, program or website.
apple staff suggested a complete restore of the IOS software, which is quite an involved process. does anyone know of any possible causes and a simpler
solution without having to reset the entire IOS 7.0.6

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

Cause and solution to XSL-1009 problem

Similar Messages

Maybe you are looking for