Cause for Delay in Report Starting?

We have a process running under BusinessObjects XI Release 2 (Enterprise) submitting a report, and there is about a 30-40 second delay between the report being created and the report start time. We are setting setRightNow =true. Any ideas as to the cause?

Hi,
I'm facing similar issue in our BO environment ..XI3.1 SP3 on win 2003 server.
There is a schedule job based on database event which scheduled to run every 5 mins. From inception I found, the schedule job sometime ran on time, some time delayed by 15-20 mins or sometime got failed.
I've checked the services in delay or failure...but no clue. Please advice what could be probable causes.

Similar Messages

High SQL activity causing delays in jobs starting

Experts,
We are having a problem nearly exactly the same time of day each day where jobs scheduled to execute during a roughly 10 minute interval are delayed in there start because of what we think is extra high SQL activity. Our conclusion is based on the observation that during this period the following SQLs are being executed 19400+ and 7100+ time respectively"
SELECT J.STATUS , J.NEWSTATUS , S.LEVEL# , J.OUT$OSNAME , J.OBJ# , J.REMOTE_STATUS FROM RWS_JOB$ J , RWS_STA$ S WHERE J.JOB# = :1 AND S.STATUS = J.STATUS AND ( J.STATUS != :1 OR J.SCH$NAME IS NULL ) FOR UPDATE OF J.STATUS
SELECT VALUE_VCH FROM JCS_JOB_PARAMETERS WHERE JOB_ID = :1 AND PARAMETER_NAME = 'PARENT_WAIT_FOR_CHILD'
We have traced this back to a package called RSISYS.
Can anyone shed some light as to what may be happening and what steps we need to perform to alleviate the situation.
Thanks.
Kind Regards,
David Carr

Hi,
The following applies to the standalone version only, which is the version you are using.
Since it always occurs at roughly the same time, it is probably something recurring.
It could be that you are starting a lot of jobs at the same time, either in CPS or in SAP (if CPS monitors SAP jobs as well).
But you would probably be aware of that.
It can also be the "DeleteCheck" of the RFC agent: please check in the registry the values for "History" and "DeleteCheckInterval" for your SAP system(s).
Finally there are a few system jobs that can have similar effects, such as RSI_SYNC_CCMS_JOBS if there are a lot of jobs to check.
Regards,
Anton.

Cause for routing delay

I have a motor control design on my spartan 6 lx9 device. As my design grew routing delays became large, which is normal
as i understand.
I was wondering what is the cause for the routing delay. Is ist the actual time the signal needs in the fpga to
traverse the distance between the gates(traveling at some percentage of c)? If so, for a routing delay of 1ns this would mean
a routing lenght between gates of around 300 cm (assuming v=c) which seems like to much..

Short answer: RC time constants due to FETs (likely). I say "likely" because I cannot find, in a very short attempt, any Xilinx documentation on how their routing matrix works at the lowest level.
Routing matrix
This is an FPGA. Unlike an ASIC, general purpose routing is configurable, and that configuration as far as routing is concerned is achieved with active elements controlled by SRAM bits, such as muxes, FETs. It is not done with little nano-creatures spooling and unspooling wire within the FPGA based on your bitstream. Consequently, to get from one side of a large FPGA to the other, using the general purpose routing, can take orders of magnitude longer than it would take light to traverse the same distance in free space.

What is the cause for the mac to become slow

what is the cause for the mac to become slow?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Can anyone provide Error code list and causes for OBIEE10g/11g ?

Hi
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Regards
Srini
Edited by: Srini on Feb 18, 2012 10:41 AM

Hi,
List of Bug Fixes Included In OBIEE 11.1.1.5.0
Admin Tool
•7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
•10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
•10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
•10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
•10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
•10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
•10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
Answers
•6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
•7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
•9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
•9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
•9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
•9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
•9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
•9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
•9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
•9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
•10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
•10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
•10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
•10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
•10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
•10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
•10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
•10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
•10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
•10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
•10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
•10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
•10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
•10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
•10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
•10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
•10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
•10634175 GRAPH ENGINE IS NOT RESPONDING
•10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
•11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
•11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
•11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
•11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
•11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
•11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
•12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
•12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
CHARTING
•8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
DASHBOARDS
•7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
•10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
•10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
•10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
•10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
•10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
•10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
•11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
•11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
•11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
•12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
INSTALL
•9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
•9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
•10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
•10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
•10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
•10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
•11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
MIGRATION
•7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
REL_NOTES
•12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
SCHEDULER
•10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
SECURITY
•8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
•9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
•10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
•10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
•10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
•10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
•11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
SERVER
•6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
•6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
•8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
•9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
•9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
•9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
•10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
•10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
•10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
•10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
•10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
•11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
•11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
UPGRADE
•9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
•10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
•11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
WEB_ADMIN
•8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
•9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
•9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
•10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
•10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
•10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
•11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
•11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
WEB_GNRL
•10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
•10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
•11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
•12416695 TOOLTIP EMPTY IN MAPVIEWER
WEB_INTGRT
•10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DONâ€™T APPEAR IN DOWNLOADS TO EXCEL
WEB_MKTG
•8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
•9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
•9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
•10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
Thanks,
RM

500 Internal Server error for a single report in a dashboard

Hi All,
I had an issue with a report in a dashboard i.e.., In a dashboard a report is prepared by using the opaque view. When I ran the report in a dashboard it ran for about 15 to 20 mins and the report is excuted with the data. Now I tried to downlaod the data for that particular report into the excel sheet by using the option Download to Excel. At this stage after 5 mins I am facing the Internal serevr error. But strange behaviour is that it downloads sometimes and sometimes it does'nt. One more important thing is that I tested the query in backend and it took around 6 to 7 mins to fetch the data. The total no of rows for the query is only 166. So can anyone please give me some suggestions or we can have a discussion as this report is behaving strangely. One more thing I forgot to mention is that they used session variables as parameters in the query for two fields which they used in the opaque view to build that report.
Thanks,
Sandy

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
    The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
   SCREEN-INPUT   = 0.
   SCREEN-INVISIBLE = 1.
   MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.

Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil          TYPE filename   MODIF ID unx, " e.g. Unix server
p_pc_fil          TYPE filename   MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
*   transaction(s) for upload from server (AS)
    WHEN 'ZJPVCS303.
      LOOP AT screen.
        IF ( screen-group1 = 'UNX' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
*   transaction(s) for upload from local PC (PC)
    WHEN 'ZJPVCS303_US.
      LOOP AT screen.
        IF ( screen-group1 = 'WND' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
   WHEN others.
   ENDCASE.
Regards
Uwe

In Report Painter, my report starts on the second page

How do I prevent this from happening?
I went into section overview and joined my 3 sections into 1 table. When I go to view it in gr55 > z9ab I have to scroll all the way down and my report starts on page 2.

Hi Daniel,
Please check the following document for creating a discussion in the appropriate space within SCN: http://scn.sap.com/docs/DOC-18467
You may have the ability to move this discussion to the right area. If not, please close this discussion, and open a new one.
Many thanks,
Kristen

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

Please update the functional specifications for Vendor Balance Report

Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama Mohan

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Report Builder 1.0 for SQL Server Reporting Services 2008 R2

We are trying to implement Ad-Hoc Reporting using SSRS 2008 R2.
First of all, it is very unhelpful that all SSRS books are for either 2008 or 2012, even though SSRS has major changes in 2008 R2 compared to 2008.
Our instructional materials indicate that we should build Report Models to abstract out our databases into terms familiar to our business users.
The problem we are having is the difference in functionality between Report Builder 1.0 and Report Builder 3.0. Report Builder 3.0 is touted as having the modern, ribbon based interface that is supposed to make end-users feel more comfortable. However,
all the documentation says that end users are supposed to use Report Builder 1.0 for Ad-Hoc Reporting. And, it seems, that the reports generated by Report Builder 1.0 are not round-trip compatible with all the other reporting tools for SSRS 2008 R2.
The documentation we have illustrates that Report Builder 1.0 is nice for Ad-Hoc reporting, because is based on connecting directly to Report Models, and the end users can directly drag-and-drop entities and fields into their reports.
When we try working with Report Builder 3.0, it seems we must first connect to the Report Model as a Data Source and then build a Dataset query on the Report Model. Only then are some entity attributes available to be dropped into the report.
If the user decides another source column is needed, they have to go back, edit the query, save the query, and then drag the column from the Dataset to the report. This does not seem end user friendly at all!
We are also concerned that if we train our users on the seemingly soon-to-be-obsolete Report Builder 1.0, and get them used to having direct Report Model access, that at some point we will have to move them to the Dataset-interrupted approach of Report Builder
2+. Highlighting this perception of impending obsolescence of Report Builder 1.0 is that in our shop that is starting with SSRS 2008 R2, we cannot figure out how to get a copy of Report Builder 1.0 in the first place.
We just don't see our end users being savvy enough to handle the steps involved with creating Datasets on top of Report Model Data Sources. So we would have to build the Datasets for them. But in that case, what point is there in creating any
Report Models in the first place if DBAs are the ones to make Datasets?
As such, it is hard to envision a forward-looking SSRS implementation that has the end user ease-of-use Ad-Hoc reporting that the SSRS 2008 documentation presents.
What is it that Microsoft actually wants/expects SSRS implementers to do?
Dan Jameson
Manager SQL Server DBA
CureSearch for Children's Cancer
http://www.CureSearch.org

Hi Dan,
Report Builder 1.0
Simple template-based reports
Requires report model
Supports only SQL Server, Oracle, and Analysis Services as data sources
Supports RDL 2005
Bundled in SSRS
Report Builder 2.0 or later
Full-featured reports as the BIDS Report Designer
Doesn't require (but supports) report models
Supports any data source
Supports RDL 2008
Available as a separate web download
In your scenario, you want to use Report Builder 1.0 in SQL Server Reporting Services 2008 R2, I am afraid this cannot achieve. Report Builder 1.0 is available in the box in either SQL 2005 or SQL 2008. It is not available as a separate client apps and is
only available as a click once application.
Report Builder 1.0
Report Builder 3.0
Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Line Chart/Graph for a Matrix report in Oracle Reports 10g

Hello,
If you have a Matrix report, say Month Name as rows, Year as columns (for example 2007, 2008, 2009) and sum of Sales dollar value as cells...I want a Line Graph which shows Months on the bottom axis and Years represented by lines and the sales value as the trend or data points on the horizontal line...it seems Oracle Reports cannot do this sincethe Chart wizard does not show either the Months or years as selectable fields for either X or Y axis.
I can easily write a sql which does the pivot and produce the results for Sales by month for last 3 yrs but in this case I would have to provide column alias similar to say CURRENT_YEAR, PRIOR_YEAR, PRIOR_PRIOR_YEAR. Then, the Chart wizard works correctly but the Legend shows the column alias which is not very desirable for an executive level report.
I was hoping that since a matrix report shows the correct column names, the legends will pull through correctly but I am stuck since the Chart for a matrix report doesn't work as I described above.
Does anyone know how to do this type of Chart on a Matrix?
Thanks,
Manish
Edited by: mhathi on Jul 15, 2009 1:59 PM

The way I'd do it is with a 3D-graph, I think you need that otherwise you will not be able to represent it properly ...
You will need to create another query just for the graph, which will create another group, containing only 3 columns (YEAR, MONTH, SALES), then start your Graph Wizard, then you will see two groups, select the one containing the 3 columns and when asked for the X-axis categories select both YEAR and MONTH, then for Y-axis select SALES.
That way it should work...

Root cause for delivery to show up on LX47 transaction

All,
I am new to SAP and supporting an off site warehouse location. I'm trying to research and locate the root cause for why a delivery shows up on LX47.
The situation the warehouse is experiencing is that they are having to run the LX47 transaction multiple times a day to correct delivery issues.
I know from my initial research that deliveries show up on LX47 due to the OB Delivery being blocked, and that this is caused by the OB delivery and related Transfer Orders do not match in the system.
What I'm trying to figure out is, from an Operations standpoint, what is causing the OB Delivery and the TO's not to match?
Is there only 1 reason? Are there 100? This is what I'm trying to understand.
The only thing I have found thus far is that 2 people/transactions are in the delivery at the time of the update. Is this accurate?

Hi Nicholas,
I am sure you are very much aware about the process flow however i just want to narrate again, if the plant and storage location is WM managed then you generally create a transfer order with reference to the delivery document to perform the picking process now at the time of confirmation of the transfer order you can update the Delivery immediately (Standard SAP) or you can set the indicator to delay the delivery update(Check the below mentioned screen and IMG path).if you choose to delay the delivery update those delivery will appear in the LX47 and you have the provision to manually update the Delivery from there. (Apart from the above mentioned there are some instance where after confirmation of the transfer order and in between updating the delivery either material master / Batch master / or some other relevant parameter is in edit mode or locked which cause failure to update the delivery immediately and you will find those delivery will also appear in the LX47)
Hope this will help to get some idea about LX47 and reason for delivery whose appear in the LX47
SPRO PATH
SPRO---Logistic Execution---Warehouse management ---Shipping ----Define Shipping control -- Shipping control per warehouse

Issue in transaction code creation for sap query report .

Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.

Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina.

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

Cause for Delay in Report Starting?

Similar Messages

Maybe you are looking for