Caution: A1081 Cinema (2007) to Mac Mini (2014). Adapter does not work

I bought a new Mac Mini along with the Mini Displayport to DVI adapter (MB570Z/B). Exchanged for the HDMI adapter which does work. (After testing both with the full rig at the Genius Bar.)  I suspect that this is a generic problem and not specific to my original adapter. If so, the following is incorrect.
http://support.apple.com/en-us/HT3235

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff 

Similar Messages

  • Mac mini (2014) wont sync notes and ibooks with ipad air 2 and iphone, photos ok

    MAc mini (2014) will not sync notes or ibooks with ipad air 2 and iphone 5s, photos are ok, any ideas please?

    Syncing Notes on iPhone, iPad, and iPod touch - Apple Support
    You have to use iCloud for the Notes. Books can be synced via iTunes.

  • Is there an update for faulty Adobe Reader plug in on FF for Mac? Plug in page says unstable. I deactivated mine. FF does not work. Safari is fine.

    Has problem been corrected?

    No Adobe is not going to update the plugin for Mac and it does not work. Here is an explanation about how to get the files to open in Adobe Reader instead - [[Opening PDF files within Firefox#w_pdf-files-are-blank-and-cant-be-downloaded|PDF files are blank and can't be downloaded]]
    That article, [[Opening PDF files within Firefox]], also has more information about reading PDF files inside Firefox. You can use:
    *[https://addons.mozilla.org/firefox/addon/pdfjs/ The new PDF viewer extension]
    *[http://www.schubert-it.com/pluginpdf/ The schubert-it PDF plugin]
    Read the article though because these things will not work with each other.

  • HT3887 I applied all your procedure to make my bluetooth is working in my mac and apple but does not works , please what i doing

    Dear Sir,
    I have macpro and iphone 4s. In fact, i tried many many times to make bluetooht is working between them but unfortuantely does not work. also i tried between by ipad and other devices i faced same problem. finally , i think this is factlry problem
    please advice about this issue
    Regards
    Anmar

    The iPhone will not connect to the Mac via Bluetooth, as it is not a supported protocol.
    http://support.apple.com/kb/HT3647

  • Problem with SerialNumbers with 2007 PL 47: BOM in documents does not work

    Hi everybody.
    I have the following problem: i need to create documents through DI API (2007 PL 47).
    The items in document are BOM (sale type) with just one item as a child: this item child is managed with serial numbers.
    When i try to create a delivery notes with DI API, i receive the following error:
    "Found error:-10,You should use existing serial/batch numbers for this document type  [(----) 29-51]".
    The following code (VB . NET) is used for the insertion of the delivery (just one line with only one item BOM, with only one item child):
                Dim nErr As Long
                Dim errMsg As String = ""
                Dim delivery As SAPbobsCOM.Documents
                Dim deliveryLines As SAPbobsCOM.Document_Lines
                Dim serialNumbers As SAPbobsCOM.SerialNumbers
                delivery = oCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes)
                delivery.DocObjectCode = BoObjectTypes.oDeliveryNotes
                delivery.CardCode = "C0020"
                delivery.DocDate = Today
                delivery.DocDueDate = Today
                delivery.TaxDate = Today
                ' CREATE A LINE WITH BOM
                deliveryLines = delivery.Lines
                deliveryLines.SetCurrentLine(0)
                deliveryLines.ItemCode = "GARANZIA"
                deliveryLines.WarehouseCode = "Mc"
                deliveryLines.Quantity = 1
                ' ASSIGN A SERIAL NUMBER RELATED WITH CHILD ITEM IN A BOM
                serialNumbers = deliveryLines.SerialNumbers
                serialNumbers.SetCurrentLine(0)
                serialNumbers.SystemSerialNumber = 2
                delivery.Add()
                oCompany.GetLastError(nErr, errMsg)
                If (0 <> nErr) Then
                    MsgBox("Found error:" + Str(nErr) + "," + errMsg)
                End If
    Obviously the SystemSerialNumber used is available in a warehouse.
    The process, through the BOne interface, work correctly.
    The same code work correctly with the 2007 PL 42, but does not work with the 2007 PL 49.

    Hello everybody,
    I have the same problem that Marco has, still can't add the serial numbers for child items managed with serial numbers when the item in the document lines objet is a BOM, sale type.
    I'm using SBO 2007 SP01 PL08 and I didn't try the code I'm using on a previous PL.
    I wonder if any body has the solution.
    Thanks in advance.

  • Mac Pro 2014 USB Keyboard not working for log-in.

    I have a Mac Pro 2014 with two thunderbolt displays and an apple USB keyboard.  Whenever I boot up the computer the keyboard doesn't seem to work at first.  Often I get hung up on the log-in screen pushing keys to no effect until the bluetooth keyboard dialog comes up.  Then after that sits fruitlessly looking for a non-existent keyboard for about 30sec the USB keyboard will start to work.  In total I'd say this delays logging in by about a minute.  During this whole time the USB mouse and Wacom tablet work.  After logging in everything works fine.
    Also this might be related, if the computer goes to sleep it can take several attempts to wake it up before I'll get a login screen.

    Mine was also fresh out of the box. My reseller in Iceland could verify this and this was the solution. I first thought it was the Icelandic keyboard. Reported it as bug.

  • 07' Mac Mini 4GB Ram Upgrade Not Working.

    I have a 2007 Mac Mini (Intel Core 2 Duo) which runs slow with 1GB ram. I purchased two 2GB sticks of ram and replaced the two stock ram sticks previously making 1GB ram - But my Mac Mini will not boot with 4GB ram in it. I tried taking one stick out, leaving one 2GB stick in with no luck, and so I have no other ideas. I was told that this would be no problem, and I installed it all correctly following every procedure necessary.
    Can anyone help me?

    Komputerbay ram is sketchy at best, and another user here:http://forums.macrumors.com had the same experience you are having with that memory, the Mac will not even boot.
    The memory for Macs has to be very precise, 5300/5400 is not acceptable as a rule.  It must be straight 5300.  If you can, return the memory modules and buy some guaranteed to work with your Mac.  Go to OWC, http://www.macsales.com or Crucial, http://www.crucial.com who guarantee their memory to work or your money back.

  • Mountain Lion Mac Mini Server Ethernet Port Not Working

    I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

    Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

    Hi.
    I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by  (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
    Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Mavericks on my late 2013 Mac Mini (8gb RAM) does not recognize my APC650CI UPS as a UPS

    I have a late 2013 model Mac  Mini running Macvericks.
    I just bought a an APC Back-UPS XS 650CI for it (I have 3 other Back-UPS 650CI for other systems - Windows 7 and 2x Netgear NAS setups).
    In the Energy Saver panel of System Preferences the Back-UPS 650CI is not recognized, but it IS correctly listed in the USB section of System Profiler.
    I have tried other UPS monitor programs: PowerSave UPS does NOT recognize it, but apscupsd DOES recognize it.
    The Netgear ReadyNAs DOES recognize the new unit (I tried swapping the two Back-UPS XS 650CI's around)
    I have reset the UPS - still not recognized.
    I have tried on of the other Back-UPS XS 650CI's that I have around - not recocognised.
    I have reset the Mac's Pram - still not recognized
    I have reset the Mac's SMC - still not recognized
    I have reset the com.apple.PowerManagement.plist - still not recognized
    My ancient Macmini1.1/Intel Core Duo DOES recognize the Back-UPS 650CI in the Energy Saver panel of System Preferences.
    Thanks for your help
    Andrew

    Answering myself
    Had long conversations with APC/Schneider (quite helpful once you get past the drones)
    They weren't aware of the problem but it does seem that Apple have removed/omitted the code that used to recognize the APC Back-UPS XS650CI at some point after Snow Leopard - Lord knows why.  This despite the fact that it is correctly listed in the USB section of System Profiler.
    The only solutions that I can see is either for APC/Schneider to get Apple to reinstate the relevant code (unlikely) and/or for APC/Schneider to issue an updated version of PowerChute for Mac (long overdue), which is possible but don't hold your breath.
    I bought the (rather expensive) PowerSaveUPS app from the Apple Store but that doesn't work either (http://www.powersaveups.co.uk/) - I've emailed them to grumble but no reply yet.
    In the meantime best bet is to use apcupsd for Mac - it isn't ideal but it works - RTFM. 
    The latest iteration is available on http://sourceforge.net/projects/apcupsd/files/osx-binaries%20-%20Stable/3.14.11/
    Cheers!

  • My Mac Mini (2009 version) does not let me boot from another device

    I can see the other devices fine, it is just when I select any one the system keeps trying to boot and I get nothing. I can stop the retry process and choose my Mac hard drive ok. Of special note is I have recently discovered that my DVD drive does not function (not sure if this is relevant).

    As Squiggle wrote, the external drive was definitely bootable.  It was a clean installation of Leopard (retail package) on an empty drive.  I tested it on my own mini before going over.  It did not boot on his mini.  The drive was visible.  It mounted properly.  It was visible, and selectable, in the "Startup Disk" system preference.  The mini went into an endless reboot cycle.  The only way to interrupt the cycle was to hold down the option key and select the internal drive (yes, the external drive was listed at this point as well).
    After giving up on that approach we tried TDM, using the retail Leopard DVD in the DVD drive in my PowerBook. Again, the drive was visible, and selectable.  The same reboot cycle occurred, and the same method had to be used to break the cycle.
    Yes, I zapped PRAM (not that I expected it to do anything).
    The DVD drive in the mini appears to have problems, but will that prevent booting from any device other than the internal drive?
    I'm stumped.

  • I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

    I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
    I have OS X versus 10.10.3

    The system bus and all connected products should appear in the system profile or in the
    hardware part of About this Mac (more info) and if that does not, restart the computer with
    the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
    return trip to be rid of the SuperDrive, you could try a system management controller reset.
    The SMC reset is not a first choice, so I won't post a link to the support instruction page.
    A new Apple USB SuperDrive should be seen as hardware in system information report.
    Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
    Good luck & happy computing!

  • Mac Mini extremely slow - Superdrive not working

    I have a 2006 Mac Mini that has the following issues:
    -cannot keep a wireless connection w/Airport (PC's in the house do)
    -will not recognize dvds/cds nor will it write them
    -slows to snail pace when running more than 1 application at a time
    My brother suggested using the installs discs to whipe the mac clean because it would get rid of any virus/worm that might be on there.
    My question is: Will upgrading from Tiger to Leopard whipe everything anyway, in addition to losing every file on my mac? Also, if I do have a virus/worm then what is the best protection for Macs?
    I'm almost ready to give up and go back to Windows. I'm so frustrated with my mac!

    Hi airheadial, and a warm welcome to the forums!
    hpr3 gives some good advice to start with.
    How much Memory do you have? How full is the Hard Drive?
    It's not likely you have a Virus infection.
    You could upgrade to Leopard without losing any files, but I don't think it'll cure the problem, especially difficult with no Superdrive!

  • Mac Mini (2011) audio & Bluetooth not working

    Hi All
    I have a 2011 mac mini (intel) but the audio doesn't work in windows 7 64 bit when connected via the audio output at the back (not hdmi), also windows cannot find the bluetooth drivers either.  I have installed bootcamp windows support version 4 and no luck so far.  Any help would be greatly appreciated since my local istore isn't reliable.

    Ah, no joy, as suspected...I'm using Boot Camp version 4 and all i got was a flash drive full of boot camp version 3.1 - 3.3?  A few firmware upgrades that says it isn't compatible...
    IS THERE ANYONE AT APPLE THAT CAN HELP!!!
    Jesus! I bought this a week ago and I can't even get audio!  If this is the kind of service coming from Apple then I don't know...

  • I have mid 2011 mac mini and it does not detect my apple tv

    It does not detect it or I dont know how to use airplay

    What Mac OS X do you have?  ICloud requires 10.7.2 or higher.  Then the iCloud icon is in System Preferences.

Maybe you are looking for