Caution iP4 User's Using InvisiShield Screen Protector

The great news is that the below mentioned vendor's are aware of what I am about to share and are fully supporting iP4 User's incurring the issue at no additional charge.
My caution involves those iP4 users having installed the InvisiShield screen protector and attempting to place the iFrogz Luxe case on it, as it will inadvertently lift-up the lower corners of the Shield protector when you slip it into the lower portion of the case. Again, iFrogz is aware of this and are working on a retro fit of this case, issuing Gift Codes for replacement cases when they are available.
Note: according to iFrogz, the issue has to do with the internal felt padding in their Luxe case being a little too thick, creating this issue. I used the iFrogz Luxe with my iP3G for two years and its a Great Case, leading me back to it again with my iPhone.
As for InvisiShield, they honor their life time warranty and replaced my Shield at No Cost to me, and I still highly recommend their "Shield" as the best screen protector on the market.
With that, I have also discovered another iP4 case which was even more devastating to my InvisiShield screen protector, which was the Belkin Grip Edge Premium Leather Shell case. Another great fitting and feel case for the iP4, leaving one to feel like there isn't an attached case. Unfortunately, the CS person I spoke with at Belkin was rather flippant leaving me the impression I can return the case, period, which I will reluctantly do since it is a great case otherwise, but doesn't meet my need for the InvisiShield.
For those wondering why I attempted the purchase of another case... I just feel better having my iP4 protected in a streamlined case despite carrying it in my pocket. Unfortunately, despite explaining my concerns with the AT&T store rep having the Shield on it, he impulsively inserted my iP4 into the Belkin case with reckless abandon, lifting all sides of my InvisiShield protector...
Although creating another nuisance for me in having to replace my Shield again, I must reinforce that AT&T will reimburse both cases without question.
If your still with me... there is one more cautionary note I want to pass along to those of you awaiting the APPLE "bumper" to be shipped and that is, Prior to randomly placing it on your iP4 with the Shield on it, beware that APPLE may not have (nor should they have to take into consideration) considered the potential consequences of those users with Shield protectors on their iP4's when applying these cases or bumpers... so be very careful before placing your bumper case on your iP4. I have submitted this as Feedback to APPLE today as a caution and hopefully they will add this to a Disclosure note to the rest of us. I love my iP4 and have not experienced any of the expressed antenna issues reported... seeing I am still using it without a case and bumper awaiting my iFrogz case

ironman1964, great observation... I personally believe there are a few variables coming into play... with the glass you mentioned being one and the chrome lip... although, having just looked at my teens 3GS, I noted the chrome lip your referring to, but there is still a small portion of the 3GS's screen which rises above the chrome which would be exposed to the sides of the Luxe case. All kinda mute when we compare against the new design of the iP4... so I am focused more on the glass top of the new iP4 screen as being incompatible with Zagg Shield? I must admit some ignorance here, but is the iP3(3GS) screen made up of a different material than the iP4? (non-glass vs glass??). If so, may be a whole other variable to consider why the Zagg Shield isn't adhering as well on the iP4, thereby not withstanding the slightest torque on its sides and corners??
The "tight fit" you refer to is due to the internal padding on the iFrogz Luxe case doesn't help... so hopefully their thinning it down will resolve the issue without compromising a snug enough fit in holding the phone in place.
The other observation I made was that the front side edges of the Luxe case "wraps around" more of the front edges of the iP4 then its 3G/GS predecessor Luxe case, which encroaches more on the Zagg Shield, causing its lower corners to catch and lift as you slide the iP4 into the lower section... likewise the top section of the iFrogz case doing the same when you slide it onto the iP4.
I have my iFrogz "gift code" and just waiting for their newly released retro-fitted case. I will report again as soon as I receive it. Thanks for replying back

Similar Messages

  • Should I use a Screen Protector with Otterbox Defender or Griffin Survivor?

    I bought both of these rugged cases and keep hearing that the actual cases can scratch the phones.  Should I use a screen protector on the phone face and back as well?  I assume that may not fit in the cases if I do that.  Anyone have any experience with these cases?

    Mine
    Redwood_Empire wrote:
    I have the Ghost Armor (same as ZAGG's invisibleSHIELD) installed on my Iphone and my otterbox defender will be here today (anytime) I will let you know how it goes or how it fit as soon as my defender get delivered by FedEx.
    Do you have the shield on the front and back?  I read they do not fit in the Otterbox with both.  I would bet one side may fit.  I think if you use a thin one like the Verizon site has (PureGear Display Protectors) on the front I bet it will fit.  I have the Survivor case and have not head a chance to try the shield with it.  I got the phone, and first threw it in that case.  I know what to get a shield on it if possible.  Please let me know if it fits.

  • Are there any cons to using a screen protector?

    Hi. I'm going to be getting an Apple smart case for my new Ipad Mini today at Best Buy and wonder if I should also get a screen protector?. I've been using it without one for 5 days and like the feel of it. I know a protector would keep the screen pristine, however on my Iphone 4S it seems to diminish the display by slightly blurring it. I'm using my Mini mostly for Ibooks. The other concern I have is trusting whether BB will get it on the device right but I would not want to try myself (too worried I would make a mistake!) Thanks for your guidance and loving my Mini. Missy

    I was considering the same thing when I bought my iPad Air. I really enjoy using the iPad with no cover/case at all. The way Apple designed it. The cool aluminum and smooth glass. I understand you on those points. The same can be said for the iPhone. I have both a case and screen protector on my iPhone. I can remove the case, not the screen protector. Those aren't made to install and remove repeatedly.
    I'd prefer not to use a screen protector because of how it blurs the screen but also because it affects the "feel" of the screen. Gone is the silky smooth feeling of the glass. I got a scratch on an iPhone screen once and use a screen protector now. I carry the iPhone with me 24/7 so it needs more protection.
    My iPad Air is a different story. I also bought it at BestBuy and use it for iBooks quite a bit too! I use the new iPad Air SmartCase to protect it but haven't installed a screen protector. I haven't installed one because the screen is only vulnerable while I'm using it and is protected by the case while I carry it. I like how the display looks and feels without the screen protector on.
    The good news is, if you decide to install a screen protector, you can easily remove it if you change your mind. I hope this helps...
    Ryan

  • Do you use a screen protector? for powerbook.

    Do you use a screen protector for your powerbooks? if so, what do you use?

    No, I thought about it and decided that a screen protector was not something I needed. The reasons:
    * Key marks are generally finger oils, not physical scratches, and are therefore not permanent and can be removed using a damp cloth and gentle pressure. I have had my PowerBook for 2 years and this has held true. Various parts of my PowerBook have deteriorated far faster than the screen.
    * I didn't want to have this additional thing to have to remove after opening the lid and to replace before closing the lid. To me that's annoying and complicates the experience. I love being able to get going as soon as I open the lid.
    * I transport the PowerBook in such a way to avoid having other items in the bag compress the lid to the keyboard. If you carry a PowerBook in a backpack with 3 classes worth of textbooks and give the bag a hard landing on the library table with the PowerBook on the bottom, well, you might make some permanent marks that way.
    * When thinking about all the things I might want/need to buy with the amount of money the screen protector would cost, I decided the screen protector was way far down on the list.
    Nothing personal to those who find screen protectors useful, but that's the reasoning I arrived at. My opinion is that screen protectors are one of the many accessories that profit from unfounded consumer anxieties.

  • Who is NOT using a screen protector?

    I would like to hear from people not using any screen protector. Does your screen scratch up at all with normal use? I'd rather not apply one if I don't have to. I tried the one that came with my iSkin revo2 (the best skin case out there!), but I don't like it on there. The screen doesn't look as good as it does bare.

    I never used a screen protector on my 1st generation iphone and never had any issues.
    On my new 3g iphone - i did put on the invisible shield on the front and back. I didn't install it on the front to protect against scratches though - I installed it on the front as the invisible shield seems to GREATLY reduce the amount of finger smudges and smears - it made a huge difference in the amount of greasy fingers smears - works like magic, and it is also so clear that I really don't notice it on there.
    I also put it on the back to keep the white plastic from getting scratched - it also has a slightly sticky feel to it - just the right amount which I like.
    Best Buy sells the front side of the invisible shield for $15 - alot of money for sure but it's awesome. Check this vid on youtube - pretty darn strong
    http://www.youtube.com/watch?v=rQcv3ETEQdM

  • IFrogz Luxe Case When Used on iP4 w/InvisiShield Screen Protector

    I was surfing some of the topics in this Discussion Grp the other day and a young lady mentioned that when she slid her iFrogz Luxe case onto her iPhone 4 w/InvisiShield.. that the screen protector started to peel away.
    Having applied the InvisiShield on my 3G two yrs ago with the iFrogz Luxe case, without any issues, I kind of dismissed her claim... however asking her if the new iFrogz Luxe case wrapped around the iP4 more than it did on the iP3G... and no reply back.
    Well, I stand corrected... 3-days after applying InvisiShield to my iP4, I slipped the iFrogz case onto my phone and sure enough it started to peel the InvisiShield off. Alas... there is Good News
    1. InvisiShield stands by its Shield and replaced mine
    2. I contacted iFrogz and they are already working on a fix which has to do with the felt on the inside of their case which raises the iP4 just enough to cause what I described above.
    3. As long as you present them with a pix of their case & receipt they will send you a voucher for a new case... they anticipate another 2 weeks before the new cases are ready.
    A little inconvenience, but all parties are standing behind their product.

    Did you ever hear back from iFrogz concerning this issue? I just bought a case today and sure enough I'm having the exact same problem you just described.
    Thanks.

  • Do you recommend using a screen protector for iPhone 5?

    Does iPhone 5's screen scratch easily with normal use? I'm really careful with my Apple products, but I don't want to have scratches on my screen.

    had
    2 ipod  touch never used one
    1 iphone never used one but did crack the back glass a bit a screen protector would not have helped there though
    1 ipad crack the front screen a bit from drop doubt a protector would have helped
    don't really have much in the ways of scratches on any of them but if you are the type who will try to sell
    the device  you own as soon as a new one is released then maybe both a rugged case and screen protector would be a good investment

  • Do you recommend using a screen protector with the new ipad?

    I just got an ipad with retina display.  I am wondering if I need to get a screen protector for it?

    A screen protector can also significantly degrade the touch screen experience.  I know one very talented sketch artist you does some amazing art on her iPad and she says she cannot do it on anything but a naked iPad screen as otherwise the screen looses too much sensitivity.
    They also make most stylus work poorly too, for the same reason (I use a stylus a lot with NoteShelf and Note Anytime for work stuff, and a screen protector really interfers with it).
    Just to warn you that, depending on how you use it and the type of apps you use, you may find them more or a problem then a solution to anything.

  • Using Laptop Screen Protectors like OWC brand

    Does anyone use OWC's Laptop Screen Protector? I recieved mine today and put it inside my macbook pro but it seems like it shouldn't even be there because the laptop is rather hard to close, almost have to give it a good little push for the case to lock when the LSP is in there.
    Anyways, I'm using it to keep my macbook mint while its running in clamshell mode. Also, i think my macbook pro is running hotter with the LSP inside the notebook but it could be my imagination. Is there a problem with the LSP sitting inside while its running? Should a LSP only be used when the computer is alseep/powered off and closed?
    If anyone can comment from experience that'd be awesome!
    2.16 C2D MBP 2GB   Mac OS X (10.4.8)  

    I would only use it during transport. Mac are notorious for screen damage from vibrations while traveling as are many others laptops.
    If it is closed while running you are already insulating it if I recall OWC is not a breathable fabric and these units are running too hot as it is.
    If you absolutely must have something there while the unit is on your desk I would find something that allows for airflow in/out of the keypad. But I never travel without it. I just use the one that is shipped w/the unit.
    FWIW
    W1

  • Stylus hard to use with screen protector on iPad mini

    I have put a screen protector on my iPad mini and now I have to press the stylus really hard.

    I use a US$4.00 stylus on my screen protected iPad with no problem.
    I think the tip of your stylus is too soft.
    Try tapping instead of pressing.

  • Should I use a screen protector for an iPhone 6 Plus?

    I just bought an iPhone 6 Plus and can't decide if I want/need a screen protector on it. I take great care of my phones and do not set it carelessly down on any surface.

    Yes.
    We were going without for the first time, and after only 2 weekes,  my wife just showed me a hairline scratch on hers.  She says it could not possibly have happened, but it did.
    I just ordered screen protectors for both of ours.

  • HT203671 What if I use a screen protector together with the keyboard top case?

    Does a screen protector keep the screen from being damaged by a keyboard top case?
    According to some saying, the screen could be damaged by any accessory between the keyboard and screen because there is a coating on the screen. Then anything between the keyboard and screen would hurt the coating the leave a scratch on the screen. So if I put a protector onto the screen, does it protect the coating from being hurt? Or does the back-adhesive protector itself hurt the coating (because it is adhesive)?

    So I'm sure you're aware of this:
    My Retina Display has stain damage, HELP!!!
    So if you're aware of that then you know there is a total controversy about this problem.
    "Does a screen protector keep the screen from being damaged by a keyboard top case?"
    Some people there swear by them and some people say "anything between the keyboard and screen would hurt the coating"
    So I would say "absolutely maybe!"
    Sorry to be like that but we have so little information about this problem.
    "does the back-adhesive protector itself hurt the coating (because it is adhesive)?"
    I would say to avoid anything that has an adhesive on it. Some people have said that they cover their keyboard with a microfiber cloth but again I would say "this is purely anecdotal hearsay not based on science or actual testing."
    I feel this problem is caused by outgassing of the keys or plastic in the computer.
    If we knew more about the nature of the coating then maybe we'd have a course of action. I'd research the coating and see if there was a way to protect it.
    Good luck!

  • UPDATE:  iFrogz Luxe Case When Used on iP4 w/InvisiShield Screen Protector

    I just ping'd iFrogz today and heard that they are already shipping retro fitted iP4 Luxe case to Best Buy's... This due to their contract agreements to their major distributor's, etc. in supplying them first.
    No, I did not feel the love at that point!!! So I asked them about being able to apply the Gift Code at a Best Buy, etc., & still awtg word back. I'd go to Best Buy but won't know if the Luxe case their selling on the shelf is the original for the iP4 having problems, or the newly redesigned case??? Not sure its worth the hassle of ripping the corners off of my Zagg Shield again... so I may wait!!

    Did you ever hear back from iFrogz concerning this issue? I just bought a case today and sure enough I'm having the exact same problem you just described.
    Thanks.

  • Can you use a screen protector to cover a corner crack? If not, how much is a replacement iPad Mini?

    Basically what title asks.

    It will cost you approximately US$219.00 to US$299.00 depending on the model.
    Apple will replace the entire iPad; they don't repair.

  • Need Suggestions for iPhone 4 Case/Screen Protector

    I'm getting my iPhone 4 next week and want to protect it as soon as I get it out of the box. However, deciding how to protect is difficult. Ideally, I want a thin case that is not bulky and preserves the original look of the phone and a screen protector that is thin and preserves the screen's resolution. Does anyone have any suggestions as far as cases to buy and cases to avoid? There are so many choices! Thanks.

    +ust came back from the Apple store and a guy at the genius bar told me that all apple stores are recommending ip3gs and ip4 users not use a screen protector b/c it lowers the phone signal. Is there any validity in this. I've heard that the full bodykit from zagg is the best and was thinking about buying it but now I'm doubting it b/c of what he told me. Can anyone confirm this?+
    This is not true plastic on the screen will not reduce reception...!!!!
    I have the zagg because lifetime warranty and I will tell you that it is really nice product. I will admit
    that the orange peel is not as pleasing to the eye. You will not notice it when the phone is on only off and at an angle. One thing about zagg is if you get a new phone for what ever reason you just remove the film and take it to where you bought it and they will replace it for free. This is well worth the $24!!!!
    I had to get a new iphone 4 today and they gave me absolutly no problems at zagg in the mall......
    The apple bumper is ok........It does not feel as good in the hand to me BUT, that is personal preference and also the down side is that I will not dock in my ihome ip1 stereo dock....it has to be removed.....

Maybe you are looking for

  • Hp color LaserJet 3500n printer driver

    I just got a new iMac and have marveled at how EASY everything's been ... so far. Of course, Murphy just couldn't resist and I can't get my oldie but goodie hp color LaserJet 3500n printer to print. I clicked + in the Print & Fax System Preferences.

  • Patches not visible in SCCM 2007 Site server even after approving the patches in WSUS

    Hi, The patches are not appearing in SCCM 2007 site server after approving the same patches in WSUS. Below are the patches. MS14-080: Cumulative Security Update for Internet Explorer - Windows Server 2008 SP2 - IE 7 - KB3008923 [23,186.1] MS14-018: C

  • Any way to restore lost videos??

    I recently came back from winter break to discover that my external hard drive had died and taken all of the videos I downloaded from iTunes with it, is there any chance I can restore this??

  • Tiger / Compressor 1.2.1 and MPEG-2 output - How to avoid jumpy video.

    This post is to summarise my experience with compressor and mpeg2 transcoding in the hope that it will save someone else time and help them avoid similar problems. I recently transcoded a series of mpeg2 files to a lower compression setting using com

  • Removing children

    i have a movie clip container that i am dynamically adding buttons to. i need to know how to remove all of the children from my container movie clip. i need to remove all of them before i re-populate the container with the new buttons. i need a line