CAVA integration with MS SCEP 2012 R2 ?
EMC CAVA is a storage antivirus which connects to a single remote windows machine with compatible antivirus. (McAfee, Symantec....).
Can SCEP 2012 be used instead because we are replacing McAfee with System Center End Point Protection 2012.
Shahid Roofi
Endpoint Protection is just that, protection for the endpoint (and only the endpoint). If you need or require protection beyond the endpoint, SCEP is not going to help you and Microsoft does not have a solution for you for this particular need/requirement.
It's simply not part of what they have chosen to focus on.
Jason | http://blog.configmgrftw.com | @jasonsandys
Similar Messages
-
Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2
Hello!
This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
and of course we don't want to keep having to reset the profiles.
I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
made no difference.Ah - solved my own problem.
Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem. -
SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time
we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra ThotaHi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
Error while running SSRS 2012 report integrated with SharePoint 2013
Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
ThanksHi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation
Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
DeepakHi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala -
Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
test.Reset();
test.ProcessingMode =
ProcessingMode.Remote;
test.KeepSessionAlive =
true;
test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc -
AD RMS 2012 integration with exchange server 2013
AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials -
Remote WSUS integration with SCCM 2012
Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in AdvanceWhen you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys -
The problem with forecast reports in SCOM 2012 after integration with VMM 2012
Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
--- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support -
OEM integration with SCOM 2012
Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger -
EM 12C Integration with SCOM 2012
Hi
Has anyone integrated EM12C ( running on Solaris Sparc ) with MS SCOM 2012 ? Just looking for any hints / tips /issues ... etc ...
Any thoughts appreciated.
Regards
RobIf the integration is along the lines of forwarding events from Enterprise Manager 12c to SCOM, then we are currently finalizing an event connector for SCOM 2012. It will enable the sending of events from Enterprise Manager to SCOM.
Regards,
Ana -
OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?
Hi,
OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?
Is SCCM just for physical servers, and SCVMM for virtual?
What are benefits of integrating them?
/SaiTechHi,
Please refer to the links below:
Introduction to Configuration Manager
http://technet.microsoft.com/en-us/library/gg682140.aspx
Virtual Machine Manager
http://technet.microsoft.com/en-us/library/gg610610.aspx
The System Center 2012 Integration Guide provides information about automating each of the System Center components and integrating them with each other and with other systems and applications.
For more information, see the
System Center 2012 Integration Guide.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm in the pilot phase of replacing FCS on our workstations, servers with SCEP 2012.
The FCS client was uninstalled as soon as the SCEP 2012 client appeared, SCEP Definitions are updated, but I'm getting prompted in the Software Center for http://support.microsoft.com/kb/2508824.
Why would I even need (be offered) this if FCS is not on the machine? If I try to install it it fails.
EDIT: am I right in assuming Client Update for Microsoft Forefront Client Security (1.0.1736.0) is not needed if SCEP is being used and I can just remove it from my Software Updates Group?Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching
Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com -
Remedy CMDB Integration with SCCM 2012
We are facing an issue with duplicate entries of Hostname after remedy is integrated with SCCM2012.We have created custom view in SQL database which mapped to remedy database.Below is the query used for the integration.Can I get any help on this?
SELECT DISTINCT
dbo.v_GS_COMPUTER_SYSTEM.Name0, CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('3', '4', '6', '7', '15')
THEN 'Desktop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('8', '9', '10', '21') THEN 'Laptop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
THEN 'VDI' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('2', '17', '23') THEN 'Server' END AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0, dbo.v_GS_COMPUTER_SYSTEM.Model0, dbo.v_GS_OPERATING_SYSTEM.Caption0,
dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
dbo.v_R_System.User_Name0 AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPAddress0,
dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0, dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00 AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW, dbo.v_R_System.Last_Logon_Timestamp0, dbo.v_GS_COMPUTER_SYSTEM.Domain0
FROM dbo.v_GS_PC_BIOS INNER JOIN
dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
dbo.v_GS_NETWORK_ADAPTER_CONFIGUR ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.ResourceID INNER JOIN
dbo.v_GS_OPERATING_SYSTEM ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
dbo.v_R_System ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_R_System.ResourceID LEFT OUTER JOIN
dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP ON
dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID INNER JOIN
dbo.v_GS_SYSTEM_ENCLOSURE ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID INNER JOIN
dbo.v_GS_X86_PC_MEMORY on (dbo.v_gs_x86_pc_memory.ResourceID = .v_GS_COMPUTER_SYSTEM.ResourceID) inner JOIN
dbo.Processor_DATA ON dbo.Processor_DATA.MachineID = dbo.v_R_System.ResourceID INNER JOIN
dbo.CH_ClientSummary ON dbo.CH_ClientSummary.MachineID = dbo.v_R_System.ResourceID
WHERE (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPEnabled0 = 1) AND (NOT (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0 IS NULL)) AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 >=512)
Thanks,
ShijilThank you Nash for your help.
I tried with dbo.v_R_System_Valid as suggested, still the same result.Is there any way to filter duplicate computer name in this query?
Below is the query.
SELECT
DISTINCT
dbo.v_R_System_Valid.Netbios_Name0,
CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('3',
'4',
'6', '7',
'15')
THEN 'Desktop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('8',
'9',
'10', '21')
THEN 'Laptop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
THEN 'VDI'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('2',
'17',
'23') THEN
'Server' END
AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
dbo.v_GS_OPERATING_SYSTEM.Caption0,
dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
dbo.v_R_System.User_Name0
AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPAddress0,
dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0,
dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00
AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW,
dbo.v_R_System.Last_Logon_Timestamp0
from
dbo.v_GS_PC_BIOS
inner JOIN
dbo.v_R_System_Valid
ON dbo.v_GS_PC_BIOS.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.ResourceID
INNER JOIN
dbo.v_GS_OPERATING_SYSTEM
ON dbo.v_GS_OPERATING_SYSTEM.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_R_System ON dbo.v_R_System_Valid.ResourceID
= dbo.v_R_System.ResourceID
LEFT outer
JOIN
dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP
ON
dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID
INNER JOIN
dbo.v_GS_SYSTEM_ENCLOSURE
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID
INNER JOIN
dbo.v_GS_X86_PC_MEMORY
on (dbo.v_gs_x86_pc_memory.ResourceID
= .v_R_System_Valid.ResourceID)
inner JOIN
dbo.Processor_DATA
ON dbo.Processor_DATA.MachineID
= dbo.v_R_System.ResourceID
inner JOIN
dbo.CH_ClientSummary
ON dbo.CH_ClientSummary.MachineID
= dbo.v_R_System.ResourceID
WHERE
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPEnabled0
= 1)
AND (NOT
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0
IS NULL))
AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0
>=512)
Thanks,
Shijil
Maybe you are looking for
-
How do I add a new font to the list?
In "Tools/Options/Content/Advanced" how do I add a new font to the list? I have "Comic Sans MS" listed for one of the options, but the drop-down menu does not contain that option, so I can't select it for another font option.
-
Database ranking not working properly
Hi, I am using BO XI 3.1. I have a requirement where I need to show top X Customers depending on their balance. I have applied Db ranking in query panal and try to run the report. However, I am getting wrong and very irrelivent values. I checked it b
-
ABAP Runtime Error "ITAB_DUPLICATE_KEY"
Hi all, I am getting Abap runtime dump "ITAB_DUPLICATE_KEY" There is already a line with the same key. details are.......... Program............. "SAPLRMPU " Error analysis You wanted to add an entry to table "\PROG=RMPU_SEL_SCREEN\DATA=REP_SR-PKHDIX
-
Converting dates and timezones
I have a third-party application that is feeding me data. I will get a particular line and it will include a message time in GMT and the local timezone offset as a number (-5, -6, etc.) rather than as a Timezone. I need to get the actual local time o
-
Script to determine computername of user connected to share
Does any know how I can get the computername of a user connected to a file share? I started using FSRM to monitor for files that are created when a crypto virus hits. We have had several in the past few weeks. Currently FSRM sends an email to me and