Cb54g Wireless NIC Questions

I've got a few questions about the CB54g Wireless Cardbus NIC:
1) I frequently loose my wireless connection in Windows XP (Pro, SP1 and SP2beta) for no apparent reason. I've transfered control over the connection to the software that comes on the CD and disabled the Wireless Zero service, and this seems to solve the problem, but as a side-effect it takes at least a minute from the time my I can first see my wallpaper on startup until I can actually do *anything* on my system (even open the Start Menu). Is there another workaround for this problem?
2) I'm also getting in to the FreeBSD scene, but I've yet to find any drivers for this NIC for that OS. Does anyone know if there are/will be any drivers developed for this NIC on FreeBSD, or if there are any compatible drivers?

I have the exact same problem with my CB54G . I also frequently loose my wireless connection. I have a fujitsu-siemens amilo m-6500 with windows XP and SP1. I dont understand what can be the problem...I also have the last update for the card drivers. If anyone in msi (or not) could help i would be very happy.
Thankx for all anyway,
Leba
ps: i'm using a vpn to connect and its the vpn that simply disconnects...

Similar Messages

Did I buy the wrong wireless NIC card?

Hello all .... I have a small home network consisting of 3 laptops and 2 desktops ... They were all connected via a WRT54G router with the one desktop farthest away using a wmp11 wireless NIC ..... this particular desktop is approx 75 - 100 ft away from the router ... so far there's been no problems, but that one machine always showed EXCELLENT signal strength (when you'd over the cursor over the little wireless icon in the systray) ....
For some unexplained reason (cause I'm dumb) I decided to purchase a new router, I got the Linksys WRT160N ..... well the machine with the wmp11 wouldn't even boot up any more, let alone communicate with the router. So I ordered a new wireless NIC for it, a wmp600N...which I installed and now at least that machine boots! The machine does connect to my network, and appears to run on the internet fine, however my question is now whenever you check that machines wireless status, it always says signal strengt is "Poor" or "Very Poor". I see now (I don't know why I didn't notice it before) that there is yet another wireless NIC for that router, and am now wondering if I bought the wrong nic card. I'm just wondering why my signal went from always showing EXCELLENT to now showing POOR all the time.
When I first ordered this router off the Linksys site, I remember distinctly specify "RANGE" as one of my requirements, yet when I received it from Linksys the box was clearly marked it was NOT for range.... so I am sorta confused.

I guess I am just concerned as there seems to be so many networks (routers) around here, there is always 7 or 8 connections available on the list of avail networks and I am just concerned about that one machine connecting to the wrong router when it is booted up ....
when I was using the wrt54g, and it always showed "Excellent" and the others always showed poor to very poor (1 or 2 bars) ,,,,,,,
but now with the new router always showing just one or two bars as well on that one machine .... I worry that it may connect to the wrong thing sometime. This wouldn't be such a worry for me IF there were simply an option to set "Connect to this network ONLY" on the nic,
but there isn't, just a "Connect to preffered network IF in range" ..........
Not that it matters here is the whole reason I have these machines and routers on a network is because I am severely disabled with M.S. and getting up and down steps to all my familys machines isn't so easy, and that one machine about 75 feet from me is impossible. So I have them all networked thru the router, and I use a remote control program (called Radmin) to access the various machines from this one laptop.
I am starting to wonder if the fact that nothing will work when this router is on 20mhz bandwith at all, is indicative of some sort of problem with the router itself? That is funny as the wrt54g was 20mhz only I beleive, and it worked perfectly!

[mostly solved]RaLink RT2860 wireless NIC not working, in eeePC 1000HE

I'm having trouble getting my wireless NIC to work.
I have a clean, up-to-date system, no [testing]. I'm using the stock kernel, 2.6.30, which according to the 1000HE wiki (http://wiki.archlinux.org/index.php/Asu … 000HE#WiFi), is supposed to work out of the box.
The problem I run into with iwconfig is that it doesn't set an essid. The essid shows as blank, then I run:
iwconfig ra0 essid "my id"
and iwconfig ra0 again shows a blank essid.
I've tried wpa_supplicant, and it just spams CTRL-EVENT-SCAN-RESULTS indefinitely (my config file is attached).
I've tried wifi radar, and it gives me errors about the network I'm trying to connect to having no AP address.
I've only tried to connect to the one network here that I have access to. It's an unsecured university network with many APs (I think it's called roaming or something?). Once you have an IP leased, you try to go to a website and are automatically forwarded to an authentication login page.
I've attached the output from a bunch of different commands:
ifconfig -a:
eth0 Link encap:Ethernet HWaddr 00:26:18:40:58:85
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ra0 Link encap:Ethernet HWaddr 00:25:D3:13:D2:4E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:99 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13066 (12.7 Kb) TX bytes:0 (0.0 b)
Interrupt:19
iwconfig:
ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
iwconfig ra0 essid "hi": returns no output
afterward, iwconfig returns identical output as above
iwlist ra0 scan:
ra0 Scan completed :
Cell 01 - Address: 00:0C:E6:40:7E:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 02 - Address: 00:0C:E6:40:7E:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 03 - Address: 00:0C:E6:40:76:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:24/100 Signal level:-80 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 04 - Address: 00:0C:E6:40:76:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:34/100 Signal level:-76 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 05 - Address: 00:0C:E6:40:88:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:60/100 Signal level:-66 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 06 - Address: 00:0C:E6:40:7B:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 07 - Address: 00:0C:E6:40:97:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 08 - Address: 00:0C:E6:40:75:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:39/100 Signal level:-74 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 09 - Address: 00:0C:E6:40:88:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 10 - Address: 00:0C:E6:40:7B:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 11 - Address: 00:0C:E6:40:75:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:44/100 Signal level:-72 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 12 - Address: 00:0C:E6:40:8D:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 13 - Address: 00:0C:E6:40:8D:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
iwpriv:
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
connStatus (0004) : set 0 & get 2047 char
driverVer (0005) : set 0 & get 2047 char
bainfo (0006) : set 0 & get 2047 char
descinfo (0007) : set 0 & get 2047 char
radio_off (000A) : set 0 & get 2047 char
radio_on (000B) : set 0 & get 2047 char
show (0014) : set 1024 char & get 2047 char
bbp (8BE3) : set 2047 char & get 2047 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
stat (8BE9) : set 0 & get 2047 char
get_site_survey (8BED) : set 0 & get 1024 char
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
01:00.0 Network controller: RaLink RT2860
03:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0)
wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant.conf:
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-TERMINATING - signal 2 received
cat /etc/wpa_supplicant.conf:
# Catch all example that allows more or less all configuration modes
network={
ssid="UM Wireless Network"
scan_ssid=1
key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="very secret passphrase"
eap=TTLS PEAP TLS
identity="[email protected]"
password="foobar"
ca_cert="/etc/cert/ca.pem"
client_cert="/etc/cert/user.pem"
private_key="/etc/cert/user.prv"
private_key_passwd="password"
phase1="peaplabel=0"
dmesg: (This was run after all the other commands. I ran the wpa_supplicant command a couple of times, so the tail of the output is the result of a few different attempts by wpa_supplicant to find a network.)
Linux version 2.6.30-ARCH (root@arch) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F800000 mask 0FF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e2000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f7a0000 (usable)
modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
modified: 000000007f7f0000 - 000000007f800000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000fff80000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7f6fc000 - 7f78fe11
Allocated new RAMDISK: 00628000 - 006bbe11
Move RAMDISK from 000000007f6fc000 - 000000007f78fe10 to 00628000 - 006bbe10
ACPI: RSDP 000fb9d0 00014 (v00 ACPIAM)
ACPI: RSDT 7f7a0000 0003C (v01 A_M_I_ OEMRSDT 04000920 MSFT 00000097)
ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 04000920 MSFT 00000097)
ACPI: DSDT 7f7a0430 05D8C (v01 A1192 A1192000 00000000 INTL 20051117)
ACPI: FACS 7f7ae000 00040
ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 04000920 MSFT 00000097)
ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 04000920 MSFT 00000097)
ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 04000920 MSFT 00000097)
ACPI: HPET 7f7a61c0 00038 (v01 A_M_I_ OEMHPET 04000920 MSFT 00000097)
ACPI: SSDT 7f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000624e44] TEXT DATA BSS ==> [0000100000 - 0000624e44]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000625000 - 00006271e0] BRK ==> [0000625000 - 00006271e0]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000628000 - 00006bbe11] NEW RAMDISK ==> [0000628000 - 00006bbe11]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f7a0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007f7a0
On node 0 totalpages: 522031
free_area_init_node: node 0, pgdat c04c1380, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2304 pages used for memmap
HighMem zone: 292514 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1ffa000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
Kernel command line: root=/dev/disk/by-uuid/2debd498-3ab0-459c-afbe-d75860e0d650 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1662.281 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0007f7a0)
Memory: 2064176k/2088576k available (2902k kernel code, 23140k reserved, 1047k data, 392k init, 1179272k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc04e1000 - 0xc0543000 ( 392 kB)
.data : 0xc03d590f - 0xc04db6a8 (1047 kB)
.text : 0xc0100000 - 0xc03d590f (2902 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.08 BogoMIPS (lpj=5540936)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3326.54 BogoMIPS (lpj=5541676)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6652.63 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7eb7800-0xf7eb7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x25c-0x25f has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xe000-0xefff
pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 591k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1247582678.410:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1731
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7900 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7a00 irq 27
ata4: DUMMY
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata6: port disabled. ignoring.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev: starting version 141
ACPI: AC Adapter [AC0] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
ACPI: SSDT 7f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [P002] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (42 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Linux agpgart interface v0.103
intel_rng: FWH not detected
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
=== pAd = f8591000, size = 580808 ===
<-- RTMPAllocAdapterBlock, Status=0
rt2860 0000:01:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:03:00.0: setting latency timer to 64
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
iTCO_vendor_support: vendor-support=0
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101713
input: Asus EeePC extra buttons as /devices/virtual/input/input8
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 1-8: new high speed USB device using ehci_hcd and address 3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64
usb 1-8: configuration #1 chosen from 1 choice
elantech.c: assuming hardware version 2, firmware version 2.48
usb 5-1: new full speed USB device using uhci_hcd and address 2
elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
usb 5-1: configuration #1 chosen from 1 choice
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Linux video capture interface: v2.00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1336
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1375
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
RX DESC f73ce000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1431
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1588
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1714
===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1779
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1409
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
RX DESC f6948000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1070
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1316
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1165
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1145
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1504
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
Last edited by mishchea (2009-07-15 02:42:39)

Malstrond wrote:Mostly because Ralink just hacks their drivers together to work somehow. A module should never require files in /etc/, but they don't care. The file contains settings, ranging from packet thresholds to country selection. There is a readme file in the archive, you can change some interesting things in there, i.e. auto roaming.
The staging drivers included in the kernel have this settings file included in the module, but there have been problems with this in 2.6.30, among others, the included drivers for RT2870-based hardware, for example, can render your system unusable.
Sadly, there doesn't seem to be much effort on the side of Linux community either. Maybe it's because all the devs interested in this already bought one of earlier EEEs with an Atheros chipset.
I've got one of these cards and it works fine. I'm running 2.6.31.
I use a wpa_supplicant based connection. I suggest that you do the same, the config file is crap and it doesn't appear to accept iwconfig input.
For netcfg and this card, try netcfg 2.5 which will be out in the next 24 hours. In the meantime, you could configure your networks in a wpa_supplicant config file. Don't use a catch all like above, create a more specific one.

Hyper V on Win 8.1 Pro - can you use a wireless nic or does it need to be ethernet

On my desktop with win 8.1 pro i installed win 8.1 pro on hyper v as we are going over this chapter in school. i got it loaded just fine but when i start it up I have no internet on the virtual 8.1 pro OS. My desktop uses a wireless nic and I'm wondering
if this is the problem. I was able to get it to work once, but when I shut it down I no longer had an internet connection on the host OS. So i went in and removed the virtual switch and that did it - now i have internet on my desktop but when i turned the
virtual machine back on, created the virtual switch again - no internet on virtual machine. I have a feeling I'm configuring something wrong - I will probably find out monday at school but decided to post here because it is bugging me!
Any help is greatly appreciated
S Vender

FYI - you should not need to perform the wireless sharing that is outlined in the article in the link provided.
You should only need to select the wireless adapter as the physical adapter associated with your External Virtual Network.
The internet sharing that folks do is only necessary in a very small number of cases due to router issues or wireless NIC driver issues.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

What wireless NIC should I Deploy?!?

I know this is going to be somewhat biased, but I have the unique opportunity to choose a wireless NIC for our company.
It's like this... We have been rolling out many different types of laptops from Dell over the last couple of years and each one has a different built in wireless NIC. We have not had good success from Intel for obvious reasons, we have had great success from external Cisco cards, and good success from Atheros internal chipsets.
What I want to know is what are you using and what works the best. We want to pick one and move forward with only one type of card in the future for all of our laptops.
Thanks in advance for your input.

I think your right. It's so hard to get and stay with one model just because Dell may decide to do away with the model we have 500 of. Then we choose another model and the wireless NIC is a different model. Now we have two NIC's to learn to manage, find updates for, configure, troubleshoot, etc.
We also have issues with some laptops due to having several folks share the same laptop, so we use Windows Zero Config to get the profile we create to work across each users login. With the Intel Utility, we can't do that, and Windows is not the way to manage the wireless profiles. It just doesn't work well in my own opinion.
I know Cisco has a client that will allow the profile to work across multiple logins, is there anything else out there that doesn't cost to deploy?
I knew a guy that said he knew how to get the Intel clients to do it, but I can't get in touch with him.

T440s won't sleep with wireless NIC enabled

Windows 8.1 used to allow automatic sleep on battery (after idle timeout). It stopped working. It will go to sleep if manually executed, but not after the idle timeout. I've called Microsoft, Intel and Lenovo support - all COMPLETELY USELESS. After 4 days of testing and reading forums and online posts, I've determined the issue to relate to the Intel Wireless AC 7260. If the card is connected to an access point (any) the laptop will not automatically enter sleep. If I activate airplane mode or disable the wireless NIC (wired NIC no impact) the laptop will go to sleep after being idle. I have tried the driver updates, rollbocks (both Intel supplied and Lenovo), the homegroup removal (this is a domain computer never in "private network" mode anyway). Nothing has helped other than disabling the wireless nic - which is now I use the laptop 98% of the time. Any help/thoughts are greatly appreciated.

Maybe something heavier handed will work:
Download the latest Intel wifi driver package (apparently 17.0.5.8):
http://www.station-drivers.com/index.php/downloads/Drivers/Intel/Wlan/PROSet-Wireless-WiFi-Software/...
Have it saved but don't install yet.
Grab RAPR:
https://driverstoreexplorer.codeplex.com/
Enumerate and sort by Driver Class. You should find a section under Network Adapters. Check everything Intel and Network Adapter (except the one belonging to the wired NIC; identify this by the driver version). Check Force Deletion, and then Delete Packages.
Reboot and you should have no wireless driver installed. Now attempt to install the latest 17.0.5.8 drivers.
Do back up any saved wireless network passwords as this will clear that list.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

X130e (2340-A17) wireless NIC driver

We recently received 113 X130e netbooks and when we were creating an image for them we found that we could not find the drivers for the wireless NIC.
VEN_14E4&DEV_0576 P/N 60Y3251
Is the A17 model supported? We can't seem to find it in the support section.
System Update and LTT won't install on the machine.
The 2340 drivers from the website provide 'This device cannot start. (Code 10)' in Device Manager
Using Drivermax, I backed up the driver on one of the Windows 7 Home Premium but could not restore it to a Windows 7 Professional.
We are running Windows 7 Professional 64 bit.
Google has failed me, and up until now Lenovo support has been excellent. Any help would be appreciated.
Solved!
Go to Solution.

Hi TCCG_ICT!
Try this one:
Readme:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zw803ww.txt
Download:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7zw803ww.exe
Tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!

Wireless NIC Realtek RTL8191SE not recognized in Fedora 12

I have a toshiba satellite U505 and it came with this wireless NIC, i cant navigate with this card using Fedora 12 because that OS doesn't recognize the wireless NIC, it seems that its because i need to install the proper Driver, but i havent find the one for this wireless NIC.

I have a Satellite U505-S2005. The wireless antenna does not work. When I ask the search for available wireless networks a message to turn the key (switch) of wireless, but it was already on and he did not recognize it. Can someone help me? I use win 7
[email protected] Thanks.

Disabling power management on wireless nic

Hi,
Is it possible to disable the power management/power save mode for the wireless nic in os x? In ubuntu, it can be done using iwconfig (ex. iwconfig wlan0 power off )
Thanks.

True, the connection doesnt get lost, but the Cisco Lightweight Access Points recognise the Macbook has dropped into a Low power/Power management state after a few minutes of no network activity. A show client on the console of the WLAN controller shows the client has dropped into a power management state after a few minutes of inactivity, not inactivity on the machine, but network inactivity.
WLANCONTROLLER#>show client detailX.X.X
Client MAC Address............................... X.X.X.X
Client Username ................................. XXXXX
AP MAC Address................................... X:X:X:X:X
AP Name.......................................... AP_XX
Client State..................................... Associated
Client NAC OOB State............................. Access
Wireless LAN Id.................................. 2
BSSID............................................ X:X:X:X
Connected For ................................... 350 secs
Channel.......................................... 161
IP Address....................................... X.X.X.X
Association Id................................... 6
Authentication Algorithm......................... Open System
Reason Code...................................... 1
Status Code...................................... 0
Client CCX version............................... No CCX support
Re-Authentication Timeout........................ 82958
Mirroring........................................ Disabled
QoS Level........................................ Silver
802.1P Priority Tag.............................. disabled
WMM Support...................................... Enabled
Power Save....................................... ON
Current Rate..................................... m15
This is enough to force a full re-auth of the client
Apple clients dont support Cisco CCX extensions so Key Caching cant occur, and full re-auth is required, which can cause client to lose connection.
If the client could be forced to keep the WLAN card active when the macbook is on there would be no issue. Seeing as OSX is based on linux, one would assume this would be a possibility to have this available as an option, even if it doesnt exist currently surely it isnt a limitation of the hardware, merely the OS.

GE70 0NC Wireless NIC upgrade?

This is my first Intel and MSI setup so I feel like a bit of a noob.
I am looking for an upgrade for the wireless NIC that is shipped with the GE70 0NC. Are there any suggestions for upgrading the Intel 135n?
The card that caught my eye is the 65xx series. It is triple band and has very generous speeds.
Is it possible to use something like that on this system ?

the drivers aren't a problem as i would think i could just use the win8.1 drivers from Killer. The issue i'm concerned about is that there are 2 antenna cables that need to be plugged onto the adapter and since the Killer is Dual Band Wireless 2.4GHz and 5GHz but my existing intel centrino 135n is only single band that the RF cables inside my laptop might not have the 5GHz i need ? There ARE 2 cables inside my laptop i see plugged onto the intel centrino 135n but i'm not sure what the 2nd is doing.

WIRELESS NIC CARD for HP6126UK.

Hi I would like to know what WIRELESS NIC CARD for HP6126UK would be suitable, as i would like to connect to a wireless connection.

Hi:
The easiest thing to do is to purchase an external usb wireless adapter for your PC.
That way you don't have to be concerned with what will specifically work for your PC.
All external usb adapters should work.
Something like this:
http://www.amazon.co.uk/Linksys-Dual-Band-Wireless-N-Adapter-Antenna/dp/B0080K6OXO/ref=sr_1_1?ie=UTF...

Wireless NIC + DD WRT = network failure

Hello guys,
I've been walking with this problem for a while now. Every time I connect to my wireless while I'm on Archlinux my router jams, I can't even access it through 192.168.0.1 when I plug in a cable.
Info:
Wireless NIC: Intel Centrino Ultimate-N 6300
Router: TP-LINK WR-1043ND with the latest preSP2 DD-WRT
Terms: dd-wrt router will mean that the router runs dd-wrt and stock router will mean that the router runs the stock firmware.
Facts:
Connecting to the DD-WRT router with windows: no problem
Connecting to the stock router with windows/archlinux: no problem
Does anyone know what the problem could be?
P.S.: I won't go back to stock firmware, since the stock firmware has problems with port forwarding and I really need it.

I thought this problem was going to be extremely rare, but interestingly it seems I'm not the only one experiencing this. I thought i would note that I also have a Centrino 6300 AGN and am experiencing the same kicking of connections.
I’m using a Buffalo wzr-hp-ag300h and have tried two separate stock firmwares which are based off of dd-wrt. It also happens in both Ubuntu 32bit desktop 11.10 and Arch 686 version 2011.08.19. However the Windows 7 installation does not cause this effect. It happens when i connect using either the G or the A radio.
Apparently there have been some workarounds posted here:
http://thelinuxexperiment.com/guinea-pi … my-router/
Actually i am surprised it’s potentially so easy to crash a ddwrt router without even authenticating to it.

T400 (2765-T6U) Hanging on Logon After Wireless Nic Install

So we have recieved our first batch of 4 T400's (2765-T6U) and I of course wiped them out and loaded on XP Pro with SP3 and updated everything so all devices had their respective drivers. But once I installed the Wireless NIC drivers (Intel WiFi 5100 Link) from either Lenovo or Intel the logon process hangs once you type in your username and password and press enter. It hangs for a good minute and then proceeds along at lighting speed. And I have rebuilt our base laptop now twice and the same issues exists. If I uninstall the Intel Wireless drivers, I have no issues but sadly we can't have that. Anyone have any ideas?
Message Edited by sczigler on 10-23-2008 01:07 PM
Solved!
Go to Solution.

Hi,
We have the same problem you describe, only it does not matter if we use the fingerprint software to log in or not. The product is a T400 2765 - 22G.
Our setup is pretty much like you describe it, clean winxp install, drivers from the lenovo website and lenovo power management software, fingerprint software and access connections.
Now the difference is that your solution does not work for us, the wireless zero service is enabled, disabling or enabling it again does not solve the issue, the only thing that helps is disabling the wireless device or uninstalling it, but this is not an option for obvious reasons.
I hope somebody knows what to do next, because other drivers, sequence of installation and exlusion of other software ( access connections, power management software ) does not give us positive results.
Regards.

Which is used first, the NIC or Wireless NIC?

I have a new Macbook Pro that I am currently using with the wireless N going to my TimeCapsule.
I heard that it would be faster to used a wired NIC.
My question is, which will the Macbook use first if both are active? the Wired NIC, or the wireless?
I would like to have both active because I often move the Macbook from my desk and use it on the couch, so I would like to seemlessly swith to wireless.

Great! By the way, as I see you're using an rMBP like I am you might find that wifi will sometimes be used as the primary adapter regardless of your set service order. I have the feeling it's because wifi is a built in adapter (and hence will always be en0) and ethernet isn't.
If you use local network file shares like I do, sometimes you may notice network throughput slower than it should be. Simply turning wifi off, and back on, should fix it. A mounted file share will continue to use the adapter it was mounted under unless it becomes unavailable at which point it will automatically switch to the first it can reconnect with based on the service order. Doing this doesn't unmount your files shares but may interrupt a copy (or similar) process.

HP Officejet 6310 all-in-one wireless option questions

I have a HP Officejet 6300 All-in-One printer and I was using it with my wire network connection. I just moved to a new home, which I rent, and I do not want to make new wholes to past the cables then this is my question:
"I have a Cisco Linksys AE1000 high performance wireless-N usb adpater (dual band)" and I saw this product Female USB A to Male Ethernet RJ45 Plug Adapter (on Amazon that I think will be great if I can use it). Can I connect them to make my printer wireless?"
Please help.
Thanks.
BAK

Unfortunately that will not work for this printer. Wireless printing is set up through the printers software that you install on your computer. Since this printer is not a wireless printer, there will be no option to set it up wirelessly in the software, the only options will be ethernet or USB.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Cb54g Wireless NIC Questions

Similar Messages

Maybe you are looking for