CBMA issue in PI 7.31 - Connection Type is JMS

Hi guys,
Not sure if this is the right place to post this questions. Please correct me if I am wrong.
I am facing an issue with CBMA in PI 7.31 which is working perfectly in quality system. I configured alert rules and scheduled AlertConsumerJob also. Configured alerting.isactive to true and alerting.target to '1'.
I observed that Message Alert Configuration in PIMON is routed to alert framework rather than to the page where rules that are created in ID of PI are displayed. From nwa -> soa -> monitor -> Message Alert Configuration, able to see alert rules created in ID of PI. Does correcting this helps me? Is there any configuration in NWA I am missing?
Not sure of this is correct or not, but I tried pinging the url http://<host>:<port>/AdapterFramework/aerting/ping.jsp, which shows connection type as RFC in production. Whereas in quality it is JMS. Is this the issue? Please guide if any configuration is missing in NWA.
Thanks,
Prasanna.

Hi,
Did you run the CTC wizard for this ?
Configuring Component-Based Message Alerting - Configuring Process Integration After Installation - SAP Library
Also, refer - Create new Alert consumer and its next steps in PI7.31 dual stack
Regards,

Similar Messages

CBMA issue in PI 7.31 - Connection type is RFC rather than JMS.

Hi,
I am facing issue with CBMA in production PI 7.31 which is working perfectly in quality system. I configured alert rules and scheduled AlertConsumerJob also. Configured alerting.isactive to true and alerting.target to '1'.
I observed that Message Alert configuration from PIMON is routed to alert framework rather than to the page where rules that are created in ID are displayed. From nwa->soa->monitor->Message Alert Configuration, able to see the rules created in ID. Does correcting this helps me?
Not sure if this is correct or not, but i even tried pinging the url http://host:port/AdapterFramework/alerting/ping.jsp, which shows Connection type as RFC in production. In quality it was JMS. Is this the issue? Please guide me.
Thanks,
Prasanna.

Hi,
Did you run the CTC wizard for this ?
Configuring Component-Based Message Alerting - Configuring Process Integration After Installation - SAP Library
Also, refer - Create new Alert consumer and its next steps in PI7.31 dual stack
Regards,

Missing Connection Types in Report Data Source Properties

I am running three installations of SharePoint 2013 with SQL 2012 for Business Intelligence, with Kerberos working.
I have been having intermittent issues with SQL Reporting Services in a multi-server configuration, but finally had it working in all three environments. We discovered many of our issues were caused by master page customizations which we have now disabled
temporarily while we work on function issues.
However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened. Most everything appears to still be working, except Reporting Services. I have verified that features are enabled
in both the farm and the site collection, as well as insured managed content types are being allowed on the target document libraries. I also verified the Reporting Service properties and database connections. However, I have found two clear symptoms
which I can find no other information regarding (in logs or in online searches):
1) If we try to create a new "Report Data Source" using the SharePoint UI, it will open a new Data Source Properties window, but in the "Data Source Type" field, there are no values available for me to select my connection type (e.g.,
Microsoft SQL Server).
2) In Central Administration, while administering the Reporting Services Service Application, I can manage a majority of the settings, including System Settings, Manage Jobs, Key Management, etc. However, if I click on the link for "E-mail Settings,"
I get the dreaded "Sorry Something went wrong screen," with an error saying that "Object reference is not set to an instance of an object."
So I am hoping someone has an idea of where I can look for additional information on this issue, or even better, knows what I am missing to get Reporting Services functional again in this environment!
Thanks in advance for any help provided.
Elohir

However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.
Hi Elohir,
I assume you are installing Reporting Services SharePoint mode for SharePoint 2013, you need to:
1. Install "Reporting Services – SharePoint" and "Reporting Services add-in for SharePoint Products" on the SharePoint server that the SSRS service will run on. All other SP servers only need the "Reporting Services
add-in for SharePoint Products."
2. Run the Insall-SPRSService and Install-SPRSServiceProxy on Central Admin and SSRS server.
3. Start SSRS Service only on desired SSRS servers.
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Since the issue occurs only to one of the environments, please provide more information about your multi-server configuration, and point out the server where the issue occurs.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

Issue in setting up a connection pool in Glassfish

Hello,
I'm having an issue in setting up a connection pool in Glassfish. Previously I did it succesfully when I installed Glassfish in a Windows Server machine, but now I'm trying to do the same thing on a Linux machine and it's not working.
Glassfish version is: Glassfish server open source edition 3.1.1 (build 12)
The machine is a AWS machine running Amazon Linux AMI
Oracle Database is Oracle 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option
The Oracle client installed on the machine is Release 11.2.0.3.0 Production
Java version is: Java(TM) SE Runtime Environment (build 1.7.0_02-b13)
I've created the pool with the following options:
Resource Type: javax.sql.DataSource
Datasource classname: oracle.jdbc.pool.OracleDataSource
And as additional properties (apart from User and Password) I put as URL jdbc:oracle:oci8:@EVOREAD
The TNS file is correct and I can connect without any problem using sqlplus. I already copied the ojdbc6.jar in the /opt/Glassfish3/Glassfish/lib folder and I already restarted Glassfish server. Basically I did all the same steps that I did in the Windows machine, but in the Linux machine I always receive the following error:
java.lang.UnsatisfiedLinkError: no ocijdbc11 in java.library.path no ocijdbc11 in java.library.path
I needed to create also a connection pool to a MySql Database and basically I did exactly the same steps (apart of course using all the parameters needed for MySql and the proper connector) and it worked immediately.
Anyone can help me?

You are using an OCI driver? You can either revert to using a thin client, or install the SQL client binaries and add its lib directory to the LD_LIBRARY_PATH.

PI 7.1 FTP(S) - adapter with implicit connection type?

Hi,
We have encountered some issues involving FTP connection with SSL/TLS because the standard FTP - adapter in SAP PI 7.1 doesn't support the connection type "implicit". Many of our customers use FTP servers with connection type implicit and are somewhat reluctant or unable to configure the server to accept explicit connection type.
Now, I wonder if there is any patch or update which makes the FTP adapter to communicate with connection type "implicit"?
Or if you have another workaround for us to utilize?

please refer this blog for the FTPs connection.
http://scn.sap.com/people/rajasekhar.reddy14/blog/2010/04/13/how-to-configure-ftps-in-file-adapter

Cannot select the connection type on the Nokia PC ...

Operating System: MS Windows 7 (x64) Home Basic Service Pack 1
Mobile Phone: Nokia 5130 Xpress Music Edition (V.10.10) and Nokia E66
Connection type: USB Cable (CA-101) with Nokia PC Suite 7.1
Problem: I cannot select the connection type on the Nokia PC Suite after running the programme and connecting them
Description: It was connected only one device, and it found that I cannot select the type of connection; however, I can run well on the Mass Storage of the both devices. Now, I guess that the problem is capability of MS Windows in Home Basic Edition because Ovi Suite cannot work on the version (Nokia's website shows on the systematic requirement)
Thank you
Solved!
Go to Solution.

Operating System: MS Windows 7 (x64) Home Premium
Mobile Phone: Nokia 5230
Connection type: USB Cable with Nokia PC Suite 7.1.60
Problem with the Nokia Connectivity Manager - no connections are listed and the reinstall error goes away after running repair for the Nokia Connectivity Cable Driver. Have tried the
PC Suite Cleaner
CC Cleaner
many PC Suite reinstallations after disabling anti-virus
On some installations, I would get an error "Service cannot be started" but when I cancel and restart the installation it goes straight through - I always end up with a blank window in the Connection Manager. Looked for some other issues found in older forums addressing older versions, nothing has worked yet. More help, please.

PC Suite "There is no connection type available th...

Hi All
I just purchased a Nokia 6300 and want to sync to my PC. When I run the software the messge on the bottom of the screen states " No phone connected" When I hit the Get connected button next to the message the connection wizzard opens, then I click next and an error message appears " No connection type available therefore connection to the phone cannot be established. The wizard will now close "
Can anyone help solve the problem
Gateway 1615, vista, pc suite 6.84.10.3, McAfee security enter, mozilla firefox browser,
Thanks
Cousinvinney

Success!
From the current and other comments I made it after 3 days efforts on and off!
This is the sequence of events from the start.
Start Point
A working earlier installation for a Nokia 6230i but which would do everything for my new Nokia 6300 except Sync (Menus greyed out.
Before doing anything else, make an image of your system partition (I use Acronis so you can restore the known working image if anything really goes wrong.
Downloading new versions for the new phone does not work fro this staring point! Don't even go there.
Step1
Uninstall PC Suite
Reboot your machine
Installing the new software will still not work yet. You will hit the Problem with Registry key(s) access.
You now need to delete all the REGISTRY KEYS associated with Nokia . They don't all have Nokia in the key name!
Go to the RUN box and type regedit
Browse HKEY_LOCAL_MACHINE\Software\Classes and right click and Delete every folder with Ncl at the start (e.g. NclPhonet)(I had 3 of them)and every Nokia entry (I had 1) and the Secure Platform key folder.
Exit regedit
Also, and this appeared to be the final problem I had which may have been left around from earlier aborted installs) in Windows Explorer go to ProgramFiles, and manually delete the PC_Comnectivity_Solutions folder (if it exists).
Now I installed from the CD provided with the Nokia 6300 phone and it installed without an issue and the bluetooth connection picked up the phone and BINGO the SYNC menu was not greyed out!
Phew!
All synced up now again and phone is usable!
Hope that helped.
I take no responsibility for any problems you may experience in trying to follow what I did, as my system my be different to yours , but the backup image should get you back to square 1 if you really mess up.
Cheers, and thanks to all the other guys on the blog for their hints.

Empty HTTP request received in SAP RFC test connection type G

Hi all,
While checking the RFC connection i am getting error,
response_line               HTTP/1.0 500 Empty HTTP request received
server_protocol             HTTP/1.0
status_code                 500
status_reason               Empty HTTP request received
Please let me know if this is right.

Hi,
We are trying to connect to an external server. So, we are using Connection Type as G.
RFC connection Test status is 500.
But in our case, Idoc is getting generated but it is in the XI Box, throwing the below error,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="SECURITY">SECURITY_VERIFY_ERROR</SAP:Code>
<SAP:P1>Check Signature</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Signature error Error while valdiating the digital signature. Theerror was com.sap.security.core.ws.wss.NoSecurityHeaderException No wsse:Security header has been defined for role soap:finalActor. Please verify the</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during message security handling in inbound channel: Security profile 'Check Signature'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Since the RFC is working now, we were not able to find what is the issue. Even SSL certificates are valid.

RV042 v4.2.2.08 problem connecting to ISP with WAN Connection Type PPTP

Hi,
I have an issue with an RV042V3. It does not connect to my ISP with PPTP connection type and username 'comsulting/[email protected]' , pwd 6 digit alphanumeric.
Using the RVS4000 or the old RV082V2 with firmware 2.0.2.01-tm, the WAN PPTP connection works fine.
Unfortunately, the RV042 does not output any logging information about the PPTP dialin attempts to the ISP (if there are any).
Did anybody face the same issues?
Thanks,
Richard

Hi Jonathan,
thanks for the reply. I fear there is a misunderstanding.
I am not having troubles with the PPTP server functions of the RV042 but with the client functions.
My ISP services use PPTP to dialin to the internet instead of e.g. PPPoE.
This can be chosen in the WAN connection settings but does not seem to work!
Regards,
Richard

Info required on adding new Connection type

I am trying to create an addin for a new connection Type "Oracle Rdb" and have been able to get as far as having my new connection panel available in connections and can bind to my database etc.
I can also use SQL Worksheet to query the Rdb Database.
However I am having problems getting the Connections tree to display any of my tables etc.
I have based my addin on the various extension addind (MySQL, ACCESS) etc, and have provided the appropriate XML files for queries, editing and viewing.
I am using the latest version of SQLDeveloper available on the web 1.1.2.25
build Mina 25-79
When I drill down on my connection , only TABLES and VIEWS come up on the node and then when I drill down on either of these nodes, SQLDeveloper does issue a JDBC database metadata getTables() call which my JDBC drivers return a list of the tables in the database.
But this is where it stops, no tables come up , no view come up in the tree.
Is the process for creating new connection type Addins documented and if so where?
Is there any possibility to getting a debug version of the SQLDeveloper code so that I can see how and why the Connection overview tree does not get populated.
As the tree does not get populated I cannot check to see in the remaniing addin code is working ( ie the SQL statements as described in table.xml. views.xml etc)
any help will be greatly appreciated as my fore-head is now pretty flat with all the pound againt this brick wall I have donw over the last weeks!!!
jim

Thanks Barry.
I assume you mean the value returned by JDBC DatabaseMetaData.getDatabaseProductName().
Well I did have "OracleRdb" in the XML files but the driver currently returns "Rdb" ( interesting aside, we had to change the value returned by this method to get around a problem with JDeveloper, we used to return "OracleRdb" but JDeveloper used to see the leading "Oracle" and assumed it was oracle classic db not Rdb.!)
Anyway I changed the type in the XML files to "Rdb" and now I appear to failing even earlier. I dont even get to the stage where SQLDeveloper calls out to getTables().
But what is happening is the following query is now being issued by SQLDeveloper and of course fails when Rdb tries to parse it as it is not a valid Rdb statement.
declare
nm owa.vc_arr;
vl owa.vc_arr;
begin
nm(1) := 'SERVER_PORT';
vl(1) := '80';
owa.init_cgi_env( 1, nm, vl );
end" )
Why would SQLDeveloper now think that the database driver etc can handle OWA type calls?????
jim

No connection types available

What version of Windows is being used? WinXP Pro
What Service Pack is installed? SP2
What version of PC Suite is installed? 6.82.22.0
What is the connection method, cable, bluetooth or IR? cable
If you are getting an error message, it would be a good idea if you could let us know the exact error messa ge you are getting.
"There is no available connection type and therefore connection to the phone cannot be established."
"Failed to detect available connection types. Please reinstall Nokia Phone Suite"
and when i go to manage connections, I get:
"Connection to Nokia PC Suite failed. Please reinstall Nokia PC Suite (Code: InitIMediaControl2)
I've reinstalled several times but I still can't connect.

I sent an email about this to Nokia today. I will await a response. Here is the email in part as I am having the same issue and have tried EVERYTHING to resolve it to no avail. You'd think they would have resolved it by now after four months of the start of this thread:
****************** My Email to Tech *******************
My phone model is a Nokia 6265i. I'm running Windows Vista and using an authentic Nokia CA-53 cable. I have tried NUMEROUS times to connect my phone to my PC. I also tried connecting to my friend's computer (who is running XP with SP2). It wouldn't respond in XP either. I also tried purchasing a MiniSD card for the phone. It then at least acknowledged that there was some sort of connection to the PC, however the prompt I was getting was not that mentioned in the instructions (which I have read numerous times over, very carefully).
I got the prompt "Use phone as storage device?" with the options "OK" and "Exit." I have tried both responses while trying to connect to the PC Suite version 6.83.8.7 (downloaded on May 17, 2007) via the "Get Connected!" button and neither have worked. I have brought my phone to my service provider (Cricket Communications) to troubleshoot as well. None of my efforts have yielded any results. ANY results. I get absolutely no response from my PC whatsoever that anything has even been connected. Not even in the device manager or My Computer.
I have also tried two different cables. My last resort is to upgrade the phone firmware which is currently version:
V HL100V1000.nep
17-05-06
RM-66
(c)NMP
listed in exactly that way on the phone. But I do not believe this should be a problem. Or perhaps something is wrong with the phone itself, but I do not see how that could be either.
I have not made some stupid simple mistake such as plugging in the cable during installation either. I have been through this numerous times, with & without Nokia tech support via phone.
I am STRONGLY inclined to blame the software. I think that PC Suite 6.83.8.7 is not as Vista compatible (or XP for that matter) as stated on the download site.

How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
HotSync over bluetooth works successfully.
Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
I think I have narrowed my problem down to 3 things.
(1) Finding Network Access properties (to allow connected devices to access the internet)
(2) Finding Centro's Network Connection Type: PPP
(3) Finding the correct Login Script to use
for (1) I think I've looked everywhere; found nothing on Network Access.
Checked control panel: only Bluetooth Local COM
Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
Nearly all the forums that I read says to choose Connection Type: PPP.
(3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
First script:
Send: CLIENT
Send: CLIENT
Wait for: CLIENTSERVER
End:
Script 1 Connect Log:
=======================================
Connect Log
S: client
S: client
R:
Err: 0x121F <<<netErrUserCancel b/c I canceled it.
Not connected
========================================
I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
Second script:
Send CR:
Delay: 1
Send: CLIENT
Wait For: CLIENTSERVER
End
**UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
Even without the script it has problems "Signing In".
I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share. If not, please share any ideas.
Thanks!
-Eric
Post relates to: Centro (AT&T)
Message Edited by naisanza on 01-01-2009 02:26 PM

I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
Post relates to: Centro (Verizon)
Message Edited by Cogwheel on 02-13-2009 09:45 AM

PC Suite - no USB and Serial Connection Type avail...

I have been trying to solve this problem for days now. I have Windows XP and Nokia 5310. After I installed Nokia PC Suite, there is no USB or Serial connection type in the Connection Manager; it only has Blue Tooth and Infrared conection available. I have install and uninstalled PC suite and used PC Suite Cleaner to clean the installation. I also went into the add and remove program in the control panel and click on "change" to fix the Nokia Connection Manager and Nokia Connectivity Cable Driver. It still didn't work. The thing is that the first time when installed PC Suite on my laptop, it did have USB connection option. Later after uninstalled PC Suite and reinstalled it, it start to have this problem. I am extremly frustrated. Can anyone help please?

Thanks for your reply. I have solved the problem by following your instruction below:
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Maybe when I uninstalled Chinese version of PC suite, the order in which it was uninstalled was not the one you suggested above. So，I followed your instruction and uninstall order to uninstall PC Suite again. I also uninstalled all the antivirus, spyware, and firewall before I reinstall the PC Suite. It worked; then, I reinstalled all the other security software again after I had reinstalled the PC Suite. Although it worked, I still didn't know what exactly cause the problem the first place, PC Suite version, Security protection software, or the order which it was uninstalled? All it matters is it's working.

PC Suite - there is no available connection type

OK,
I'm running XP SP2 on an IBM t30 laptop. Looking to have all 3 connection methods available. Bluetooth is Widcomm 3.0.x and PC Suite version is 6.8.22.
Initially installed PC Suite fine, but had problems with getting bluetooth connection (IRComm and Cable were fine). Read that best way round this was the reinstall after doing some fiddling with the bluetooth setup. Duly reinstalled, only now I get error when I start the connection manager or manage connections. either "there is no available connection type" for the first or "connection to PC suite failed code:Init IMediaControl2".
In order to try and deal with this I have, Uninstalled and reinstalled the app. Uninstalled the app and run the PC Suite cleanup tool 3.3 reinstalled the app. Uninstalled the app, run PC suite cleanup, removed all nokia keys from the registry, run cleanup again and reinstalled. The problem persists, my patience does not.
Help?
Dom

My experience may also be relevant, and since it took me two whole days to remedy it (call me slow, but I'm persistent), I'll share it. I too stopped being able to get a Bluetooth connection in PC Suite, even though the PC could see the phone (6230) in Bluetooth settings and I could see some of the folders on the phone.
I uninstalled and reinstalled PC Suite countless times, did all the spring cleaning I was told to do, nothing. So I thought maybe there is a problem with the Bluetooth stack.
I have a Dell Inspiron 6000, which uses Bluetooth stuff from Toshiba, so I went to their site, http://aps.toshiba-tro.de/bluetooth/. It said to check out Device Manager, and, what do you know, all the Toshiba Bluetooth drivers were missing. I have no idea how, but anyway, I downloaded a new stack at http://aps.toshiba-tro.de/bluetooth/pages/download.php
I installed it, cross my fingers, prayed to the Bluetooth Fairy, and YES YES YES! It works. The end.

CBMA issue in PI 7.31 - Connection Type is JMS

Similar Messages

Maybe you are looking for