CBS failed to communicate with other server

Hi All,
I have created one track and I have imported it in NWDS. In NWDS I have created one new DC and one sample WD project under that newly created DC, it has asked to create new activity. There I am successfully created new activity and my application is working fine. When I want to checkin the activity it is giving server communcation failure exception. The excpeiton I am getting is " Activation failed: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)". What are the steps I need to take to resolve the issue.
Regards
Suresh

Hi,
Take a look at these threads:
CBS Server Error
Akshatha

Similar Messages

  • CBS failed to communicate with some other server.

    Dear All,
    We are facing this error when we are trying to activate a request in
    NWDS & trying to check in.
    Error:Activation failed: CBS Server Error: CBS failed to communicate
    with some other server.( internal code: COMMUNICATION_ERROR)
    Just for your information, we had changed the password for nwdi_cmsadm
    few days back and then followed a note896427 and then had fixed the
    error.
    The NWDI_CMSADM password problem was solved and the transports were
    working very fine till today. But today afternoon when the developer
    tried to activate the request in NWDS, he got this error. Can you
    please let me know the problem.
    We are stuck and not able to go ahead.
    Thanks in advance.
    Warm Regards,
    Rajeet

    Hello,
    I am getting this error :
    CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
    while importing ESS into Dev. I have a user created called cmsadmin and has all the permissions/roles assigned. other files are already imported (epbuildt, pcuigp,epbuildt,sap-jtechs, sap-jee). Only this file is failing.
    I have seen the Notes about user/password upgrade. But we are on 04s sp14. and i have this user cmsadmin .
    Please advise.
    Thanks,
    Anil.

  • Operations Manager fails to communicate with DCR server

    After a recent restart of the Operations Manager server we found it is no longer able to manage devices. When attempting to open a applet that depends on DCR connection I receive an error " Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and refresh the page." I have attached the DCR logs and pdshow from the server. Has anyone experienced this issue, and if so, how can I correct it. Any help would be appreciated.
     

    I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
    I have counted over 50 different server I manage with services such as   domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
    I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
    It is happening on metal, hyper-v and esx vmware servers.
    It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
    It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
    It is happening on servers with Intel and AMD chip-sets.
    It is happening on machines that are a part of a domain or in a workgroup.
    It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
    Only a restart will fix it.
    I have ran process monitor on several of the problem machines and I cannot find anything.
    Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
    Moses Hull of Alexant Systems

  • CBS Server Error: CBS failed to communicate with some other server

    Hello, we have an NWDI (NW04s) with SP13. Our developers can't connect anymore with their NWDS to the CBS.
    In the default.trc on NWDI I find the following error message.
    #1.5^H#001125C558CE00770000000900187078000446FC77810564#1203950057489#com.sap.tc.cbs.server.rt.bs.BSAdmin
    ##com.sap.tc.cbs.server.rt.bs.BSAdmin######ac6e59c0e3ae11dcab67001125c558ce#Thread[CBS BSA Orc,10,SAPEngi
    ne_System_Thread[impl:5]_Group]##0#0#Error##Java###
    [EXCEPTION]
    #3#Unable to instantiate a Build Space administrator!
    Build Space "NW1_GEMS_C" [bsID: 87, version: 7] [in-queue: on, out-queue: "on", processing: on]#Unexpecte
    d response status [200 OK]#com.sap.tc.cbs.api.CommunicationException: Unexpected response status [200 OK]
            at com.sap.tc.cbs.comm.Repository.execute(Repository.java:68)
            at com.sap.tc.cbs.api.impl.BSFacade.getOwnerBuildspace(BSFacade.java:510)
            at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.checkWorkspace(_BuildSpaceValidator.java:87)
            at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.validateWSs(_BuildSpaceValidator.java:57)
            at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:183)
            at com.sap.tc.cbs.server.rt.bs.BSAdmin.onInit(BSAdmin.java:175)
            at com.sap.tc.cbs.server.rt.bs.BSAdmin.<init>(BSAdmin.java:143)
            at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:430)
            at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:217)
            at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:339)
            at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:139)
            at java.lang.Thread.run(Thread.java:761)
    #1.5^H#001125C558CE00770000000B00187078000446FC77810AC7#1203950057490#com.sap.sql.jdbc.direct.DirectPrepa
    redStatement##com.sap.sql.jdbc.direct.DirectPreparedStatement######ac6e59c0e3ae11dcab67001125c558ce#Threa
    d[CBS BSA Orc,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/System/Database/sql/jdbc/direct#Jav
    a#com.sap.sql_0003##SQL error occurred on connection b0d0td02:NW1:SAPNW1DB: code=-99,999, state="null", m
    essage="[ibm][db2][jcc][102][10040] Non-atomic batch failure.  The batch was submitted, but at least one
    exception occurred on an individual member of the batch.
    Use getNextException() to retrieve the exceptions for specific batched elements.
    => (-803,23505,Error for batch element \#1: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: 1;SA
    PNW1DB.CBS_LOCK)";
    SQL statement is "INSERT INTO "CBS_LOCK" ("LOCKID","LOCKGROUP","LOCKIT") VALUES (?,?,?)".
    [EXCEPTION]
    #6#-99999#<null>#[ibm][db2][jcc][102][10040] Non-atomic batch failure.  The batch was submitted, but
    at least one exception occurred on an individual member of the batch.
    Regards,
    Alexander

    Is the database full? In any case, check the database status.

  • Using my apple ID and password on Mobile Me, I get the message  "Verification Failed"  .  Could not communicate with the server.  What am I doing wrong?

    Using my Apple ID and password on Mobile Me, I get the message "Verification Failed".  Could not communicate with the server"  What am I doing wrong?

    There is a MobileMe forum.  You might have better luck their.

  • DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

    Hi everyone,
    Backup jobs for protected members are intermittently failing with the following error on the DPM server:
    DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
    Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
    The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
    A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
    Thank you.
    With regards,
    Rob

    Hello,
    I have read these entire postings and see that my problems match most of the above problems. 
    I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
    We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail.  When they fail the most common, but not only error, is something like "DPM
    failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
    Since later jobs are successful I thought all was well.  All was well until I went to restore from incremental backups.  We worked for two days (day and night work) to restore
    from a corrupted virtual disk on our SQL Server 2008 R2.  I suspect DPM had something to do with the corrupted virtual disk.  All I know is that we never had this problem until installing DPM.  Here is what we encountered when we went to restore
    from the protection points: 
    *  Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB. 
    *  If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed". 
    *  You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work.  Of course time is wasted while waiting
    to see if it worked.
    * Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
    * So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
    *  If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
    minutes of trial and error.  60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
    * And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored. 
    All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
    I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
    Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently.  I have never had one day of consistent and reliable restore points.  I
    am going back to sql management plans for my backups.  I have never, in 10 years had a sql generated backup fail me.  Never.
    gbl

  • Error: "Verification Failed" Could not communicate with the server.

    "Verification Failed" Could not communicate with the server.
    I get this message every time I go to Icloud in setting menu.
    also my contact are not in sync (empty on Ipad)
    What does this message mean, and how do I solve it.
    Everything else works (Autodesk Draw also works with Icloud and it works fine)
    Mail ok
    Downloading from appstore ok (also after password)
    Please provide me with a solution due to this problem I can't get my contacts on my new ipad (at least that is what I think)

    Ok I got it working... the Ipad stores your password at different locations. So changing it once does not do the job. I thought the Ipad had the Single Sign On function for the apple password.
    So make sure that you not only change your password in "the shop" but also in the setting menu (general) and icloud menu.
    this helped for me, I had to let go the Single Sign On thought first....

  • Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

    I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
    two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
    Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
    Data migrated:                        
    Migration rate:                        
    Error:                        
    MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
    context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
    0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server
    FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824        
    Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288  
    StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]   
    Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
    Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624   
    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856   
    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode  string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode  string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
    prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
    15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115   
    Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970  
    StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
    All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
    The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
    The Source Server is Running Exchange 2007.
    I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
    I would appreciate any help you can give me!
    Thanks,
    Jon

    Any update if you have resolved the issue.
    Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

  • The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

    We are getting the below error when we see in Crawl logs
    "The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
    This is happening in FAST search.
    Here I can see soke of the logs related to this search crawl.
    Could anyone please help on this?
    web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
    ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
    07/30/2014 01:30:46.65  OWSTIMER.EXE (0x28DC)                    0x1BC0 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
    Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
    executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.31  mssearch.exe (0x0588)                    0x1DE4 SharePoint Server Search       Propagation Manager          
     e3o3 Verbose  executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.68  mssdmn.exe (0x15CC)                      0x1060 SharePoint Server Search       HTTP Protocol
    Handler          du4i                     0x29E4 SharePoint Server Search       HTTP
    Protocol Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x29E4 SharePoint Server Search       HTTP Protocol
    Handler          du54 High     CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0.  [httpacchelper.cxx:703] 
    d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x130C SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address http://nvcp'/sites/quipme cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details: 
    The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du54 High  
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x2948 SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address
    http://nvcp'/sites/MDPPubng cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details:  The crawler could not communicate with the server. Check that the server is
    available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
     CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200  [stscommon.cxx:490]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvg0 High     STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200  [sts3util.cxx:1332]  d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     en0e High     CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214]  d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dv3p High     CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3acc.cxx:185] 
    d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb1 High     CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3handler.cxx:312] 
    d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du2z Verbose  CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'.  [stscommon.cxx:476]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb2 High     CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330]  d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'.  [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
    Anil Loka

    Hi,
    According to your post, my understanding is that you got error when communicating to the server.
    This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
    You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
              Ping <servername>
          2.  You should be able to connect to the server using telnet command
    Telnet< servername> <port number>
    More information:
    Troubleshooting of FAST Search Configuration
    If the issue still exists, you can delete the old search application and recreate from the beginning.
    You can also reset the index and do a full crawl after.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • OAM11g R2-SEVERE: Failed to communicate with any of configured AccessServer

    After Installation of OAM11gR2, when i try to start the weblogic server and managed server below message is displaying"SEVERE: Failed to communicate with any of configured Access Server, ensure that it is up and running."
    But i am able to access OAM console and do the confuguration on LDAP store.
    Then why this message is displaying and it will cause any issues further?

    see if this helps:
    The issue is due specific settings for IAMSuiteAgent agent in WLS console
    In WLS console -> Security Realms ->myrealm ->Providers - >IAMSuiteAgent ->Provide Specific - there was "localhost:5575" set as Primary Access Server. >> change Primary Access Server to be : > for current case ServerName2:5575
    Restart OAM managed server and Weblogic AdminServer

  • Jabber for Mac 9.2.1 Cannot communicate with the server

    Hi All,
    I'm using Webex and the Jabber for Mac 9.2.1 client that was automatically pushed.  I see "Cannot communicate with the server" when I attempt to login. 
    The same credentials work correctly when using the 8.6.5 client version.  I've attached the problem report file.
    I would appreciate some guidance on what I need to do to get this to work.
    Cheers,
    Steve

    We've seen this with a few of our users as well. All started noticing having issues Friday morning. As this is a hosted service for us via webex we had our engineers call in to Jabber support. Cisco performed a modification to their account and they were able to connect again. No SRV records were messed with.
    ***EDIT*** - This appears to have been caused by a certificate issue. The Trusted Root Certificate for QuoVadis expired and was not renewed on some machines. 
    Go here: https://www.quovadisglobal.com/QVRepository/DownloadRootsAndCRL.aspx
    Install the Cert for : QuoVadis Root CA2 (in windows, download as DER>right click file>install)
    Jabber should connect now. The issue was in SSL validation with the appropriate hosted servers.

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • AIR doesn't communicate with my server - PHP issue

    Hello,
    So I have made an AIR application where the file communicates with a PHP file in order to display data.
    I have WAMP installed on my computer, and the application works when I test locally using WAMP but if I upload the php on an online server(I tried on two of my servers) and run the AIR application it seems that it doesn't communicate with the server so no data are displayed.
    var url:URLRequest = new URLRequest("http://www.test.com/test.php")
    This is how I call for the php on AS3, like shown above.
    Any suggestions?
    The php file gives no errors when I browse it online so, I suppose there something else going on?

    There are no errors, on either the php files stored online neither the flash swf.
    The only file scalled from an online server are the PHP.
    I suppose I don't need to pack these PHP when publishing the air file, since they need to be called from an online server?
    Very tricky since there are no errors, I would appreciate any help since this is an urgent project.
    //EDIT:
    So I just removed the http:// from the urlrequest to the site that the PHP is stored and I get this IO error:
    Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: app:/test.com/test.php
    at my_fla::test_1/setPHP()[my_fla.test_1::frame1:38]
    Notice the app:/ ? why is it there? Could it be the issue? I am not sure, but if you link to a local file, like "test.php" it works, but when adding a URL it doesn't...

  • I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

Maybe you are looking for

  • Any known fix for high pitch sound y

    Creative, is there any fix for that problem yet? Many of us have that problem. Its annoying each time rebooting our PC to stop that. Please, answer us. Thx

  • Cant move content across to center of document

    Hi all, I started creating my simple flash movie. I originally selected the default workspace but as i got further into creating my movie many elements are outside of the document space. Now ive finished, obviously when i publish it the parts are cut

  • Special font effect?

    Hi I'm a newbie to Illustrator. My friend did a special shadow effect using the non-professional program Microsoft Publisher. Here's a quick link I made to see a sample: http://docs.google.com/Doc?id=ddvbfm3w_1fg3sqqd3 In Microsoft Publisher, apparen

  • Continue to play iTunes after closing MacBook Pro

    I recently got my MacBook Pro, and I was speachless when I found that when I closed my laptop that my music would continue to play. I would walk around campus playing music with a closed laptop-it was great. But then I needed to restart my computer,

  • Data transfer by ale

    Hi all, I am sending the HR data through ALE from one system to another. Initially while sending the data, we used pfal to send all the master data from one system, to another. Now there was a gap of two weeks for which there was no data upload. toda